Another narcoleptic PowerBook - possible reasons?

Hi all,
My PowerBook G4 15" 1-1.5GHz has developed a case of going to sleep as soon as it's booted.
I can wake it but after 1 second it returns to sleep. Within the 1 second awake intervals I have found no report of 'overtemp' in the Console log. I have also had it running without the keyboard and trackpad connected, and also without the PRAM battery connected. I'm not sure if that's recommended but it didn't solve the problem anyway. I have tried resetting the PMU (holding power button for 5 seconds) but I'm not sure it actually did anything. I should also point out that I tried replacing the PRAM battery, which also didn't change anything.
The problem developed after I opened up my PB because it was getting very hot. I put it back together (after just having a look inside and not actually taking anything out) and the sleeping problem started, and also the trackpad stopped working. This made me think it was the trackpad temp sensor but I can't actually locate it on the 1-.15GHz model - any ideas?
At one point I did get the trackpad working but the constant sleeping problem still occurred. Would I be right in saying that this means it is a software issue and that the hardware is OK? I tried to re-instal OS X 10.5.4 but my PB won't boot from the DVD. Trying from an iMac in Firewire Target mode also failed.
I was thinking about buying a replacement palm rest with keyboard and trackpad but I've read that the problem still might occur.
Does anyone know any other possible reasons or solutions for the problem?
Regards,
Ben

Well Target Disk Mode boots only work in the following manner:
If you set let's say a MacBook Pro in Target Mode, its optical drive can be used to boot the Powerbook, and install to the Powerbook a Powerbook compatible operating system. That includes the retail 10.4.6, 10.5, 10.5.1, 10.5.4, and 10.5.6, or the original Powerbook compatible CD.
But you can't try to set the Powerbook in target mode, and install the operating system from the MacBook Pro.
The problem with doing this, is the Powerbook can't run the software from a MacBook Pro's installer discs, or 10.5 or later as installed on a MacBook Pro, or have GUID partitioning done to it.
The machine with the Firewire logo is the one that is nothing more than a very expensive external optical or hard drive. Once it is out of Target Disk Mode whatever drivers get installed on it have to be compatible with it.

Similar Messages

Microsoft Excel cannot access the file "-". There are several possible reasons. Windows Server 2008 R2 with Microsoft Office 2010

I have a problem with starting the Excel Application under a particular user (service account).
I try to schedule this C# script through an application X (not Windows Task Scheduler. And this
application will always use a service account to run services on the server). If I run the C# script in
command prompt under the same user, it runs. Under the application X, which uses the exact same
user, to initiate the C# script, it fails to open the Excel application (not sufficient permission?).
This script calls application.Workbooks.Open(<ExcelFileName>,0,false,Type.missing....). At this line
of code, it gives the following error:
Microsoft Excel cannot access the file "...". There are several possible reasons:
-The file name or path does not exist.
-The file is being used by another program.
-The workbook you are trying to save has the same name as a currently open workbook.
I tried all the methods that I found online as follow:
Create directory "C:\Windows\SysWOW64\config\systemprofile\Desktop" (for 64 bit Windows) or "C:\Windows\System32\config\systemprofile\Desktop" (for 32 bit Windows).
Changed the DCOM config for the Microsoft Excel application to include this user for Local/Remote Launch and Access.
Enabled all macros in Excel application and set the Trust Center.
Add the user to have full control on all folders that contain the Excel file.
Under DCOM
config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other users can't run the excel application
on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Yet, still the same error. I think it's permission but I am not sure where and what to do for this to work.
Now, normally, when I run this excel report, I can double-click on the file and it'd automatically run,
save the new parameters into the current file and generate a new excel file (with date attached to the
file name). That means there is a change (save) to the original file.
Environment: Windows Server 2008 R2 and running Microsoft Excel 2010.
I appreciate all your help!

I am wondering if this has anything to do with having the user log into Excel.
In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
well as the folders that have the Excel files.
Please help!
Thank you!

Possible reasons for error 1074396005 invalid avi session

Dear All,
I am working on creating and writing frames on to AVI files. I need to start writing frames up on record on command and close the AVI file up on record stop command. I am trying to read frames from an recorded video and write in to another AVI file.
But i am observing Error 1074396005 invalid avi session, whenever i run the code. I am using AVI2 VI's (IMAQ AVI2 Create, AVI2 Write and AVI2 close).
I am using LabVIEW 2013 SP1 and Vision development module versions.
Below is the block diagram for reading an avi file and writing in to avi file upon record on command (numeric control value 1 to case selector)
Block diagram for record off
Below is the error observed:
Kindly suggest what would be the possible reason for the error.
With regards,
Sri
Attachments:
Block diagram1.PNG ‏59 KB
avi2 error2.png ‏381 KB
Block diagram2.PNG ‏20 KB

Might be good if you can post the code instead of screenshots.
-If session was closed or aborted due to some reason you should get this error.
-Multiple times you are creating the session inside the loop with same avi session, is it required?
-Are the images added to the avi file?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Iphone 5s, Can't easily send sms. already updated in ios 7.1, What could be the possible reason and solution?

I got my iphone 5s last 2 months, and it's ios is 7.0.6, after a month i can't easily send SMS, i have several apps and games. I tried to update my ios but still the problem persist. What could be the possible reason and what are the solutions? Please help me.

Technoboy14 wrote:
I got my iphone 5s last 2 months, and it's ios is 7.0.6, after a month i can't easily send SMS, i have several apps and games. I tried to update my ios but still the problem persist. What could be the possible reason and what are the solutions? Please help me.
What does "can't easily send SMS" mean? What problems are you having with SMS? Without details, no one could possibly give you a reason or solutions.
Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

Error 1430 occurred at Open/Create/Replace File in NI_Fuzzy_Logic_API.lvlib:FL Load Fuzzy System.vi- Untitled 3 Possible reason(s): LabVIEW: The path is empty or relative. You must use an absolute path. Not A Path how can i copy it in new vi plz help

when i am copy the vi that is in find example>fuzzy>fuzzyEx with pi control the follwing error occuring
'error 1430 occured at open/create/replacefile in NI Fuzzy logic API.LVLIB FL LOAD FUZZY SYTEM.vi
untitel 3 possible reason the pat is empty or relative you must se use an absolute patth <not apath>
plz help me i only want that i can copy this vi in new vi but when i do so the above error occur and fuzzy logic cotroller is highlited

Hello Nofil,
This is probably happening because you have made a copy of the VI without changing the name/ location on the disc. I have saved a copy of the VI for you, it is in LabVIEW 2010 SP1, please ask if you want this in a previous version.
Regards
Andrew George @ NI UK
Attachments:
Fuzzy Tanks with PI.vi ‏31 KB

MFL: The dependency is not configured in schema resource. Possible reason one or more import/include is not set   correctly.

HI Friends,
I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
The dependency is not configured in schema resource. Possible reason one or more import/include is not set
correctly.
Here is the snippet of the XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl"/>........
Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules and imorted this XSD into my eclipse workspace.
Then i added the schemalocation attribute to the Import element. which looks something like below:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
After doing these changes also am getting the same error... can anyone help me out of this????

Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Need possible reason for the error!!!

The following error occured on a QA machine while testing....when clicked on a lable a dialog should come up which contains a table with data.
I am not able to reproduce this error on developmenet machines....So i need the possible reason the occurance of this error..
java.lang.NullPointerException
at javax.swing.plaf.basic.BasicTableUI.registerKeyboardAction(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.registerKey(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.registerKey(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.installKeyboardAction(BasicTableUI.java:616)
at javax.swing.plaf.basic.BasicTableUI.installUI(BasicTableUI.java:497)
at javax.swing.JComponent.setUI(JComponent.java, Compiled Code)
at javax.swing.JTable.setUI(JTable.java:2081)
at javax.swing.JTable.updateUI(JTable.java:2134)
at ASMSFrame.UserDialog.setTable(UserDialog.java:264)
thanks

Line number 264 of UserDialog.java is throwing a NullPointerException. You are probably calling a method on an object that does not exist.

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

Please explain the possible reasons of manufacturing through Subcontractor.

Dear experts,
     The question was asked to me in interview -
     Why we prefer Material manufacturing by Subcontracting Procedure?
     Even though the company is having own machinery set up and man power, then also what
     Are the Reasons for manufacturing the components by Subcontracting?
     Please mention all the possible reasons on this question.
     Thanks in Advance !

Hi Kiran,
Some of the reasons for sub-contracting-
1. Cost
2. Capacity not available at our plant, due to overload or full capacity booking by other processes
3. Subcontractor has requisite tools and / or better know-how of that process.
4. The volumes does not justify carrying out the process in-house.
Hope the above was helpful.
Regards,
Vivek

Possible reasons for Error 30005?

Hi All,
we're on ep7, sp12..we've been encountering the foll error lately when we try to use any BI query frm one particular BW system..(holds true for all users)
when we try to drag the query to the iView, we get the Error -30005, Cannot create the BI data service, Cannot add BI data service to the iView.
the strange things is we can search for queries. however, upon attempting to see the characteristics, etc we get the foll error: "Error -30027 Cannot retrieve structure, Cannot read query description.."
Could anybody pls advise on the possible reasons/resolutions for this?
thanx
prachi

Hi Prachi,
I feel with you. I have the same problem and just a few hours ago everything was working fine. thats very strange.
Mark

Suddenly apps don't start or crash while starting: Possible reasons?

Hello,
from one minute to the next I've got massive problems with a lot of apps:
they don't start or crash while starting (resp. while executing a function).
I don't have any clue what could have happened. Last software-specific action
I did (half hour before the problems appeared) was to update the Flash player
(in the meantime I've removed it with App Cleaner).
Troubleshooting steps I've tried:
-- Start the Mac in Save Mode
-- Use Apple Hardware Test (no damage found)
-- Repair permissions
-- Check the volume with Disc Utiliy (no damage found)
I've also tried to use Onyx, but the app refuses my admin password
although it is valid and works.
The specs of my Mac:
-- Mac Mini Late 2012
-- Yosemite 10.10.2
-- RAM 16 GB 1600 MHz DDR3 (Samsung)
-- 500 GB SSD Samsung 840 EVO
The following excerpts are from the crash reports of some of the apps.
Is someone out there who understand them and can give me
informations about the possible reason for the crashes?
Thank you,
Thomas
Quark Xpress
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000022
Exception Type:        EXC_BAD_ACCESS (SIGBUS)
Exception Codes:       KERN_PROTECTION_FAILURE at 0x0000000007c7d8be
VM Regions Near 0x7c7d8be:
    VM_ALLOCATE            0000000007c48000-0000000007c4c000 [   16K] rw-/rwx SM=PRV
--> VM_ALLOCATE            0000000007c4c000-0000000007c94000 [ 288K] r--/r-- SM=SHM
    mapped file            0000000007c94000-0000000009308000 [ 22.5M] r--/r-x SM=ALI /usr/share/icu/icudt53l.dat
TextEdit
Exception Type:        EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes:       0x0000000000000001, 0x0000000000000000
Application Specific Information:
libcoreservices: _dirhelper: 523: mkdir: path=/var/folders/qx/bf4yxqkj6gbd6d8lkm20h96c0000gn/T/com.apple.TextEdit/ modes[1]=0700: Permission denied
Could not obtain valid temporary directory for sandboxed app: Input/output error (5); returned size: 0
InDesign
Exception Type:        EXC_CRASH (SIGABRT)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Application Specific Information:
terminating with uncaught exception of type AdobePSL::Exception: std::exception
abort() called
Adobe Acrobat
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x00000000f10633ed
VM Regions Near 0xf10633ed:
    Stack                  00000000bffff000-00000000c0000000 [    4K] rw-/rwx SM=COW
-->
    Submap                 00000000ffff0000-00000000ffff1000 [    4K] r--/r-- SM=PRV process-only VM submap
Application Specific Information:
objc_msgSend() selector name: release
Preview
Exception Type:        EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes:       0x0000000000000001, 0x0000000000000000
Application Specific Information:
libcoreservices: _dirhelper: 523: mkdir: path=/var/folders/qx/bf4yxqkj6gbd6d8lkm20h96c0000gn/T/com.apple.Preview/ modes[1]=0700: Permission denied
Could not obtain valid temporary directory for sandboxed app: Input/output error (5); returned size: 0
Application Specific Signatures:
_libsecinit_setup_sandbox():confstr(_CS_DARWIN_USER_TEMP_DIR...)

Thanks for your replies!
$ java -version
java version "1.5.0_07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_07-164)
Java HotSpot(TM) Client VM (build 1.5.0_07-87, mixed mode, sharing)
All other programs written at the time do run without problems if they don't use a JMenu. The two that do don't run anymore. I already did reinstall Java, didn't help.

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Would it be possible/reasonable to run Guitar Rig and Reason simultaneously on a MacBook Air?

Would it be possible/reasonable to run Guitar Rig and Reason simultaneously on a MacBook Air?

Hi there, Klaus1, BDAqua and a brody,
Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
Kind Regards,
Stefan

AI Control gives error: 10452 occurred at AI control. Possible reasons: NI-DAQ LV no interrupt level is available for use.

How can I run out of interrupts while accessing my DAQPad? Does
the community have troubleshooting suggestions?

You don't say which DAQpad. If this is a device on your parallel port then
you will need to make sure that the parallel port has an interrupt assigned
and not just a base address.
Check out the following from the NI Knowledgebase:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/bf7960eb90
ef882a8625654e007d8b1a?OpenDocument
Ian
"Riverside Consulting, LLC" wrote in message
news:[email protected]..
> AI Control gives error: 10452 occurred at AI control. Possible
> reasons: NI-DAQ LV no interrupt level is available for use.
>
> How can I run out of interrupts while accessing my DAQPad? Does
> the community have troubleshooting suggestions?

Another narcoleptic PowerBook - possible reasons?

Similar Messages

Maybe you are looking for