Another newbie discovering the MAJOR FLAW with language reset

I was just using my Nano for the first time and the language reset itself to some Asian hieroglyphics which I cannot undo. I have tried to follow the instructions to restore the original settings via "update" download, but on the Apple site, I only get a "no new updates available" message. What now??

The procedure is not "update", it is "restore to original settings" (just below in the same screen).
Read the warning, you will loose all your music.\
An option is to find blindly the settings menu and change the language; hint: Menu, Menu (to get to top menu), next to last is Settings, select, language is 3rd from bottom to top (next to next to last) the last one is "reset settings" by the way, first language in the list is English (but that should display in something legible anyway).

Similar Messages

Is there a major flaw with Iphoto in regards to organizing and backing up?

Is there a major flaw with Iphoto in regards to organizing and backing up? And how should I proceed??
Here is my story. I have moved roughly 15,000 photos from 7 computers (4 PCs and 3 Macs - basically everyone's computer in the family) onto one external hard drive. The photos were taken by many different digital cameras, are sparsely labeled, and have the most random names and folders. There are a LOT of duplicates. MY MISSION - label and back them up.
The way I normally deal with photos/DATA is this: I plug my camera into my Mac and immediately think about organizing and backing them up. With "Preview" I look at photos (and decide which one I like), create a folder called "where-ever I took these photos" and drag them into that folder. The problem with Iphoto is that you have no ability to control folders, unlike many other applications.
For example, in Itunes you can rename an artist, or even an album, and it will automatically appear in an updated folder. If you alter a photo in Photoshop, it makes you save it is a new file. In Iphoto you cannot make the same "root level" changes without making duplicates. From what I understand, you can place photos into an Album and then export that album (which makes duplicates). Iphoto will rename each duplicate file and then place it in the correct folder. The problem here is I have no idea where the original is to delete it.
Basically I want to create folders called "Trip to Italy 2003" or "Rachel's Wedding" and place all the photos associated with that event in those folders. The problem I run into is that I have a bunch of duplicates. I have heard of a program called Duplicate Annihilator which has gotten favorable reviews. If I import them into Iphoto all the photos are placed in random named folders. I say random because some of the photos were taken on cameras that didn't have the date set correctly. Hence some of my photos will appear in a labyrinth of folders called "Modified / 2001 / Roll 17 / DCM482 / Image25874654.jpg"
I am totally willing to wipe my Iphoto library clean and start again if there is a way to organize the photos as described above. Eventually I will take these folders and save them on a data DVD.
Thanks to anyone who can help.
Gary

You do not need to delve into the folders within the iPhoto Library via the finder to access any photo. That is all done within iPhoto itself. If you need a photo for use outside of iPhoto read Terence Devlin's treatise on file access. iPhoto is a DAM application - Digital Asset Management, not a folder manager. There's a big difference. You can use keywords, album and smart albums to organize your photos.
If you still have the original files you might consider what I do. I rename each file with the date it was taken using the international date format: YYYY-MM-DD-001.jpg. You can download the demo version ofMedia Expression and automatically rename each folder of photos with the EXIF date and a sequential number. This makes chronological searching and sorting much easier both in iPhoto and the Finder.
If you want to not only manage the photos but the folders then Expression Media will let you do both. It will let you rename files after being imported into a catalog, move them between folders, add ITPC metadata to the files, create virtual albums called Supplemental categories, and much, much more. I use it as my primary DAM and iPhoto for special projects like books, slideshows, calendars, etc.

Trying to backup one of my iPhoto libraries I keep getting a error message that basically says that the file could not be backed up because there is another file on the external drive with the same name, etc. There is no other file.

While trying to copy one of my iPhoto libraries to an external hard drive I get the following error message "You can’t copy “iPhoto Library old” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames." There is no other file on the external drive with this name. I have asked this question before and was told that there are some duplicate photos (files) in my library and I needed to go to "show file contents" and look at certain files to find duplicates and delete the duplicates. I did all of this and the library will still not copy and always stops copying in the exact same place on each attempt. Any help would be greatly appreciated.

You've been deleting your actual Photos.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Best way forward now is to recover the surviving Originals from this library and start over from scratch.
Regards
TD

Trigger in mutation - Update another rows in the same table with a trigger

Hi ,
I try to do a before update trigger on a table , but the trigger is in mutation. I understand why it do that but my question is :
How can I update other rows in the same table when a UPDATE is made on my table??????
Here is my trigger :
CREATE OR REPLACE TRIGGER GDE_COMPS_BRU_5 BEFORE
UPDATE OF DEPARTEMENT--, DISCIPLINE, DEG_DEMANDE, CE_ETAB
ON GDEM.COMPOSITION_SUBV
FOR EACH ROW
Organisme : FQRNT-FQRSC
Date de création : 14-07-2011
Date de modification :
Modifié par :
Auteur : Johanne Plamondon
Description : Ce déclencheur s'executera lors de la modification
du responsable dans la table COMPOSITION_SUBV
DECLARE
V_OSUSER V$SESSION.OSUSER%TYPE;
V_PROGRAM V$SESSION.PROGRAM%TYPE;
V_TERMINAL V$SESSION.TERMINAL%TYPE;
V_MACHINE V$SESSION.MACHINE%TYPE;
V_MODULE V$SESSION.MODULE%TYPE;
V_LOGON_TIME V$SESSION.LOGON_TIME%TYPE;
V_AUDIT_ID NUMBER;
vSEQ NUMBER;
i NUMBER;
vID DEMANDE.ID%TYPE;
BEGIN
begin
SELECT OSUSER, PROGRAM, TERMINAL,MACHINE,MODULE, LOGON_TIME
INTO V_OSUSER,V_PROGRAM,V_TERMINAL,V_MACHINE,
V_MODULE,V_LOGON_TIME
FROM V$SESSION
WHERE TYPE = 'USER'
AND USERNAME = USER
AND LAST_CALL_ET IN (0,1)
AND ROWNUM < 2;
exception when others then null; end;
IF NVL(:NEW.SC_PART,' ') = 'CHC' THEN
SELECT COUNT(*)
INTO i
FROM DEMANDE
WHERE DEM_REF = :NEW.DEM_ID
AND PER_NIP = :NEW.PER_NIP;
IF i = 1 THEN
SELECT ID
INTO vID
FROM DEMANDE
WHERE DEM_REF = :NEW.DEM_ID
AND PER_NIP = :NEW.PER_NIP;
UPDATE COMPOSITION_SUBV
SET --CE_ETAB = :NEW.CE_ETAB,
--DISCIPLINE = :NEW.DISCIPLINE,
DEPARTEMENT = :NEW.DEPARTEMENT,
--DEG_DEMANDE = :NEW.DEG_DEMANDE,
DATE_MODIF = SYSDATE,
USER_MODIF = V_OSUSER
WHERE DEM_ID = vID
AND PER_NIP = :NEW.PER_NIP
AND ANNEE = :NEW.ANNEE;
END IF;
END IF;
/*EXCEPTION
WHEN OTHERS THEN
NULL;*/
END;

A standard disclaimer, the mutating trigger error is telling you that you really, really, really don't want to be doing this. It generally indicates a major data model problem when you find yourself in a situation where the data in one row of a table depends on the data in another row of that same table. In the vast majority of cases, you're far better off fixing the data model than in working around the problem.
If you are absolutely sure that you cannot fix the data model and must work around the problem, you'll need
- A package with a collection (or global temporary table) to store the keys that are modified
- A before statement trigger that initializes the collection
- A row-level trigger that adds the keys that were updated to the collection
- An after statement trigger that iterates over the data in the collection and updates whatever rows need to be updated.
If you're on 11g, this can be simplified somewhat by using a compound trigger with separate before statement, row-level, and after statement sections.
Obviously, though, this is a substantial increase in complexity over the single trigger you have here. That's one of the reasons that it's generally a bad idea to work around mutating table exceptions.
Justin

How can I resolve the major problems with Lightroom 5 on iMac 5k?

There are many many bugs that have come up in Lightroom 5 on my new iMac 5k (OSX10.10.1 Yosemite) that are seriously challenging my productivity!
A short list of the problems include: Huge slow-downs when navigating in the develop module, very slow and sometimes unresponsive crop tool, improper slider scaling when develop panel in resized (because it is far too narrow on retina screen), poor auto selection of spot removal tool, slow local adjustment brush tool, and overall slow load times of 1:1 previews. My 2011 iMac beats the maxed out 2014 5k iMac in almost every part of the develop module except for initial loading and export times. What the heck is going on?!
These are just some of the problems with LR, there are many more issues with premiere pro and after effects...

Well, many of my issues evaporated when i re-installed the most recent update 5.7.1 (by download rather than cc desktop updater). Cropping is finally fast, sliders are ok for scale as long as you don't change panel size while the application in running (if you do you must close and reopen LR for slider scaling to match panel scaling). There are still some issue that I will be reporting on, but will make do for now.
This was a major retina 5k iMac compatibility update, even though its not really mentioned in the list of fixes

Found a major flaw with Apple Configurator 1.4

I have just upgraded to the new version on my personal machine to give it a test and found a problem when managing apps on an iPad. In the previous version I was able to upgrade an app on the device to a new or previous version without removing any of the documents within the app.
In version 1.4 it seems this isn't possible. The only way to change the app version is to manually delete the app from the IPad directly and then use configurator to put the required version on. This wouldn't be so much of a problem if the documents contained in the app weren't 3/4GB in size.
This seems like a huge step backwards. Replacing an app version on 10 devices took 20 seconds in the previous version and now it's likely to take 25 minutes or more. Not very conveient when you have to change it on 135 iPads. I certainly won't be updating Configurator on the rest of my machines.
If someone has the same problem and has fiound a workaround, please share. Otherwise I would hope that a fix to this issue will be implemented in an update.

Hi Dan,
A fellow Configurator user just posted this to collect a list of issues with AC v1.4
https://discussions.apple.com/thread/5379636?tstart=0
We will all be adding to the list.
~Joe

What is the major plus with Data Guard compare to standby

Hi,
We don't need active active replication between our prod and DR, our DR can be 20 minutes RPO (Recovery Point Objective) so what is the main advantage of configuring and installing oracle data guard compare to a simple standby server?
My understanding of data guard is a that oracle will ship your log auto on the DR and apply it instead of me, doing it with 2 script (one on primary server that ship log over, the second on standby that apply the archive log).

1. Your Primary site get hit by something you can failover to the standby.
2. If you have a large group of "Reader" users on the Primary you can switch them to the Standby using Active Data Guard.
3. You can do a switchover and avoid an outage if your Primary server needs work of any kind.
4. You can preform backup at either site taking even more load off you primary if needed.
or as the books says:
Disaster recovery, data protection, and high availability.
Down Side
1. Cost
2. Network Load (or additional load)
Edited by: mseberg on Feb 7, 2011 10:23 AM

When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed." After clicking on "OK" another box pops up saying "The server responded with an error." How can I get rid of these?

When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed," and after clicking ok there is another box saying "The server responded with an error." How do I get rid of this. The calendar functions all right, but just have to close both of those boxes after doing any action in the calendar app.

Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
Step 1
From the Calendar menu bar, select
Calendar ▹ Preferences ▹ Accounts
Choose the affected account from the list on the left and uncheck the box marked
Enable this account
Then check the box again. Test.
Step 2
Make a note of the account settings, then delete the account and add it back with the same settings.
Step 3
If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
Step 4
Quit Calendar. Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

UPDATING A TABLE WITH SAME INFO FROM ANOTHER TABLE ON THE SAME DB

0down votefavorite
I am trying to update a table with info from another table on the same db with same table name. I just want the info to be the same , no primary key or constraint involve just a straight replacement of records and I keep getting errors WITH THE TABLE not
being recignize. below is my query:
UPDATE
VNDFIL
SET EOBTYP
= VNDFIL.EOBTYP,
EDI_X12_835_VERSION = VNDFIL.EDI_X12_835_VERSION
FROM
AGERECOVERY
WHERE
VNDFIL.EOBTYP
= VNDFIL.EOBTYP
AND
VNDFIL
.EDI_X12_835_VERSION
= VNDFIL.EDI_X12_835_VERSION

Hi rotary,
If those two same named tables are in the same database then they have to be in different schemas. If you mean they are in the same server instance, then they may be in different databases, besides the "table not being recognized" error,
anyway you should use the fully qualified table names, that is database.Schema.Table(If across instances, ServerName should be prefixed) to avoid the table unrecognized error.
Using Identifiers As Object Names
With the fully qualified names, your update statement can be like below.
UPDATE
db1.schema1.VNDFIL
SET EOBTYP = srcTbl.EOBTYP, EDI_X12_835_VERSION = srcTbl.EDI_X12_835_VERSION
FROM
db1.schema2.VNDFIL srcTbl
WHERE
db1.schema1.VNDFIL.EOBTYP = srcTbl.VNDFIL.EOBTYP AND
db1.schema1.VNDFIL.EDI_X12_835_VERSION = srcTbl.VNDFIL.EDI_X12_835_VERSION
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

WARNING! - Multicam has MAJOR FLAW in Premiere Pro CS6!!!!!!

When you are using Premiere Pro CS6, and you are editing a multicam sequence and you hit PAUSE or STOP, Premiere CS6 makes a cut in your timeline and then changes shots back to the original shot whether you want it to or not!!! This forces users to go back and fix the un-intended cuts later which is a HUGE time waster. The thread below was started tracking the issue and then suddenly LOCKED by Adobe with a FALSE correct answer as the issue is NOT fixed! The answer is only an attempt at a workaround which DOES NOT work for everyone as pointed out in the thread and the thread should NOT have been locked as the MAJOR FLAW still persists and has persisted for years. Final Cut Pro, Avid, FCPX do NOT have this issue. Premiere Pro CS6 does.
This is the thread:
http://forums.adobe.com/thread/1069438?tstart=0
Premiere Pro CS6 is a nice editing program BUT it has a HUGE time-wasting flaw that makes editing multicam sequences VERY frustrating for many users and that still persists as of version 6.0.3. Please start by UNLOCKING a thread that is NOT resolved. The issue is NOT fixed and still persists as of October 2012. Marking something as the "correct answer" that does not work for everyone is unacceptible and only avoids the real issue that has been around for years as pointed out in the original thread started back in 2010. Please unlock the thread until the issue is resolved so the issue can be discussed constructively until its resolved!

Please don't double post. The content of the thread you referenced contains all the information that is needed to work around the issue. Thread locked. If you start additional topics for the same issue, they will be deleted.
Jeff

Problems with value retorned by FM: 'SPELL_AMOUNT' with language 'ES'

Hi,
I'm having problems with the FM 'SPELL_AMOUNT' with language 'ES'.
When amount it's over 1 billion, the output is something like this:
Amount (NUM)--Actual output--
wanted output
1.000.000.000, 00 -
Un Millardo Millones -
Un Millardo or Mil Millones
25.000.000.000,00 -
Veinticinco millardos millones -
Veinticinco millardos or veinticincomil millones
Please, if somebody could help me, god bless you!!!
Alexis Sanchez
ABAP Trainee
Valencia, Venezuela

Hi,
I tested it in SE37, i am getting the correct output, Please make sure that you are passing all the values correctly i mean the CURRENCY .
Regards
Sudheer

HTC to Reviel Soon.! Another Variant of the one m8

HTC will in near Future Release another Variant of the One m8 with this new Unit it it will be as Mentioned Waterproof and have a Possible Better Camera we can only Hope b33
I Posted the Link Below to Let ya Read More About the Phone, In the Reading of the Article it says it will Go Over Seas, But Hopefully it will be released here in the States and Comes to Verizon as the phone from the Looks of the Photos looks Quite Nice..
HTC Unveils Newest J Butterfly, a Waterproof One (M8) With a Real Camera | Droid Life

My lord, does anyone use their phones to make calls anymore?
My wife shoots photos of trees as we travel on the highway.
Sort of like those Connie & Jack commercials for Consumer Cellular.
She takes a photo of a knot hole on a tree and her husband does a double look and wonders what she took? Very funny.

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to stop this from happening. PLEASE TELL ME IM WRONG ???

YOU ARE WRONG.
Go to Settings > Notifications > Messages. You can turn Notifcation Center off for Messages, or select None for the alert style, and turn Show Preview off, and view in Lock Screen on or off.

What are the major differences b/w live copy blueprint and Language copy of CQ ?

We are in process of creating a different Language Versions of a Website and trying to figure out the best/recommended approach.
what are the major differences b/w live copy blueprint and Language copy of CQ ? which one is recommended in which ? any pointers on this would be appreciated.

The language copy tool is a one-shot tool to create pages under a certain structure. It has a nice UI for it. But that's it.
The MSM blueprint/livecopy concept is much more powerfull, because it has live connections between the blueprint and the livecopy. It does not only allow you to easily create livecopies, but supports you also in maintaining the relationshop between these. So you can easily detect, that the blueprint page has been updated and needs to be rolled out again. Or that there are conflicts, because both blueprint and livecopy have been updated independently. And so on.
From my perspective the language copy tool should not be used, because with creation of language pages the "fun" has just started and the real work is just ahead.
Jörg

Can't boot into Windows 8 Single Language 64 bit or access the BIOS screen with the F1 key

I have in my possession right now a Lenovo E49, Model name: 3464
I am unable to access the BIOS settings at POST by pressing the F1 key. Neither does it respond to the Enter key when it displays the message "To interrupt normal startup, Press Enter". I am also unable to boot into the installed OS Windows 8 Single Language 64 bit.
For your informtion, these are the events that led to this issue.
I accessed the BIOS settings at startup using the CHANGE PC SETTINGS option in the CHARMS menu in Windows 8 Single Languge 64 bit followed by GENERAL and ADVANCED STARTUP. Then I chose Restart Now. Windows restarted to produce the startup screen where I chose Troubleshoot, followed by Advanced Options and UEFI Firmware Settings, followed by Restart. This took me to the BIOS settings screen. Once there I changed the boot settings in BIOS so that SECURE BOOT was turnned OFF. It was in ON state prior to that. I also changed the BOOT MODE to LEGACY ONLY. I also changed the BOOT ORDER to boot from DVD drive first followed by the Hard Disk and USB Hard Disk. I saved the changes by pressing F10.
Now the computer is able to boot from the DVD Drive. I tested this by inserting a Windows 7 Repair DVD and also a Linux Live DVD. Mind you, I didn't mke any changes to the Hard Drive. I'm also able to boot from a USB Hard Disk. This too was tested by inserting a bootable USB HD that had both Windows 7 and Windows 8 OS installers. I used only the command prompt feature in the Repair option on the Windows 8 installer to ensure that I could access the partitions on the HD. I did not in any way install Windows 7 or 8 on the HD.
If there is no bootable DVD or USB HD inserted, the laptop is involved in a loop that restarts followed by a message that says the following:
"Intel Undi, PXE-2.1 (build 083)
Copyright (C) 1997-2000 Intel Corporation
This product is covered by one or more of the following patents:
US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625
Realtek PCIe GBE Family Controller Series v2.41 (06/08/11)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM."
I am positive that the current state of the BIOS is such that it does not accept any input keys like F1 and F12 at POST so that the BIOS can only be accessed through Change PC Settings in Windows 8 as I had done prior to the occurence of the issue. Since I cannot boot up Windows 8 I cannot use this method to access the BIOS. And since it is not possible at this stage to access the BIOS settings through the F1 key, I believe Lenovo must have surely provided another alternative to enter the BIOS. Can you kindly tell me what other way is there to do this. In earlier days, one could reset the BIOS by shorting the BIOS through pins on the motherboard. Is that possible now? Or is there some Lenovo BIOS utilily that enables me to change the BIOS setting to boot with Legacy and UEFI? Or do I have to install Windows 8.1 64 bit in Legacy mode?

I'll see if another member of the team can jump in here and offer more help...
What I might imagine is that you can only access BIOS from a cold boot. Windows 8/8.1 have hybrid shutdown and don't completely shut down the machine normally, so even when it powers off, it isn't fully off and the next boot is not really a cold boot.
Please see this KB. I realize this assumes you can get into windows.
As you suggest, it also seems as though you have set legacy vs UEFI and that may be why your drive is not currently booting. Can you remove the battery on your system? If not, is there a reset hole on the bottom? Removing battery and AC and pressing and holding the power button several times, then re-attach AC and Battery and try to restart and press F1 to get into BIOS. (Not familiar with models that use enter for BIOS).
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Another newbie discovering the MAJOR FLAW with language reset

Similar Messages

Maybe you are looking for