Another number port error
I just received an email stating the following:
"We're sorry. The phone number you entered is not eligible to be transferred.
Please re-connect to iTunes and don't select to transfer your existing number to complete your iPhone activation. "
When I connect to iTunes, I get this:
"Your activation requires additional time to complete."
When I call service, I get this:
"Uh... wait another 24 hours, make a new account without porting your number and then call us and we'll see if we can port your number afterwards."
Which is unacceptable.
What is going on here?
Have you tried to just activate the phone WITHOUT porting?
This is what I did today, and started a thread about it.
Just make a new line of service, get a new number, put call forwarding on your phone, call back ina couple days and arrange a port after activation. AT&T states this can be done, and this is how some people are temp solving this issue.
Similar Messages
-
IDoc receiver AEE: Error "Configuration for Sender/Receiver Partner Number/Port is incorrect"
Hi all,
We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
Sender is configured as 3rd party technical system system with business system maintained in SLD
business system has logical system assigned in SLD
adapter specific identifiers show logical system in ID / NWDS
logical system is defined in receiver (ECC system)
partner profile is created in ecc for this very logical system (inbound parameters)
No mapping of EDI_DC40 node in ESB (complete node disabled)
no header mapping in ID / NWDS
receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
no Identifiers specified in receiver IDoc AEE adapter
My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
Any thoughts are highly welcome.
Cheers
JensHi,
The error mentioned by you is not related to the port..but its related to the Application ...
IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
Check with the functional consultant for the error you have received..
HTH
Rajesh -
Another strange powerpill error - problem with new aria2? [SOLVED]
Looks like I'm getting another odd powerpill error. Is this a function of the new aria2 package that got deployed a day or two ago?
# powerpill -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: The following packages will be downloaded:
[core]
glib2 openssh
[extra]
alacarte at-spi atk brasero bug-buddy cheese clutter clutter-gtk conky
consolekit dasher deskbar-applet devicekit-disks devicekit-power eggdbus
ekiga eog epiphany evince evolution-data-server evolution-exchange
evolution-webcal file-roller gcalctool gconf gconf-editor gdm gedit glibmm
gmime gnome-applets gnome-backgrounds gnome-control-center gnome-desktop
gnome-desktop-sharp gnome-disk-utility gnome-doc-utils gnome-games
gnome-games-extra-data gnome-icon-theme gnome-keyring gnome-mag gnome-media
gnome-menus gnome-netstatus gnome-nettool gnome-panel gnome-power-manager
gnome-python gnome-python-desktop gnome-screensaver gnome-session
gnome-settings-daemon gnome-system-monitor gnome-terminal gnome-themes
gnome-utils gnome-vfs gnome2-user-docs gok gtk-engines gtk-sharp-2 gtk-vnc
gtk2 gtkhtml gtkmm gtksourceview2 gucharmap gvfs hamster-applet kdelibs
libatasmart libbonobo libbonoboui libgdata libgnome libgnomekbd libgnomeui
libgphoto2 libgtop libgweather libsigc++2.0 libsoup libsoup-gnome libunique
libwebkit libwnck libxklavier metacity mousetweaks nautilus opal orca pango
pangomm polkit polkit-gnome poppler poppler-glib ptlib pygobject pygtk
pygtksourceview2 seahorse seahorse-plugins sound-juicer tomboy totem
totem-plparser vinagre vino vte yelp zenity
[community]
perl-xyne-arch
:: Number of Packages: 117
:: Total Download Size: 298.48 MiB
:: Total Installed Size: 1015.32 MiB
:: Proceed with download? [Y/n] y
/usr/bin/aria2c: unrecognized option '--retry-wait=2'
Exception: [OptionParser.cc:149] Failed to parse command-line options.
aria2: Usage: aria2c [OPTIONS] [URL | TORRENT_FILE | METALINK_FILE]...
aria2: Printing options tagged with '#help'.
aria2: See -h option to know other command-line options(#basic, #advanced, #http, #https, #ftp, #metalink, #bittorrent, #cookie, #hook, #file, #xml-rpc, #experimental, #help, #all).
aria2: Options:
aria2: -h, --help[=TAG|KEYWORD] Print usage and exit.
aria2: The help messages are classified with tags. A tag
aria2: starts with "#". For example, type "--help=#http"
aria2: to get the usage for the options tagged with
aria2: "#http". If non-tag word is given, print the usage
aria2: for the options whose name includes that word.
aria2: Possible Values: #basic, #advanced, #http, #https, #ftp, #metalink, #bittorrent, #cookie, #hook, #file, #xml-rpc, #experimental, #help, #all
aria2: Default: #basic
aria2: Tags: #basic,#help
aria2: Refer to man page for more information.
--> All downloads have finished successfully
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (118): glib2-2.22.2-1 pygobject-2.20.0-1 pygtk-2.16.0-1 gnome-menus-2.28.0.1-1 atk-1.28.0-1
pango-1.26.0-1 gtk2-2.18.2-1 eggdbus-0.5-1 polkit-0.94-1 gconf-2.28.0-1
libbonobo-2.24.2-1 gnome-vfs-2.24.2-1 libgnome-2.28.0-1 libbonoboui-2.24.2-1
gnome-keyring-2.28.0-1 libgnomeui-2.24.2-1 gnome-python-2.28.0-1 libsoup-2.28.0-1
libsoup-gnome-2.28.0-1 libgweather-2.28.0-1 evolution-data-server-2.28.0-1
gnome-desktop-2.28.0-1 libwnck-2.28.0-1 gnome-panel-2.28.0-1 alacarte-0.12.4-2
at-spi-1.28.0-1 gmime-2.4.10-1 totem-plparser-2.28.1-1 libunique-1.1.2-1
brasero-2.28.1-2 libgtop-2.28.0-1 bug-buddy-2.28.0-1 gnome-icon-theme-2.28.0-1
cheese-2.28.0.1-1 conky-1.7.2-2 consolekit-0.3.1-1 dasher-4.10.1-2
gnome-python-desktop-2.28.0-1 deskbar-applet-2.28.0-1 devicekit-power-010-1
ptlib-2.6.5-1 opal-3.6.6-1 libsigc++2.0-2.2.4.2-1 ekiga-3.2.6-1 eog-2.28.0-1
libwebkit-1.1.15.1-1 epiphany-2.28.0-1 poppler-0.12.0-1 poppler-glib-0.12.0-1
evince-2.28.0-1 libgphoto2-2.4.6-3 sg3_utils-1.27-2 libatasmart-0.14-1
devicekit-disks-007-1 gnome-disk-utility-2.28.0-1 gvfs-1.4.0-1
evolution-exchange-2.28.0-1 evolution-webcal-2.28.0-1 file-roller-2.28.0-1
gcalctool-5.28.0-1 gconf-editor-2.28.0-1 libxklavier-4.0-1 polkit-gnome-0.94-1
gnome-session-2.28.0-1 gdm-2.28.0-1 gtksourceview2-2.8.1-1 pygtksourceview2-2.8.0-1
gedit-2.28.0-1 glibmm-2.22.1-1 gucharmap-2.28.0-1 libgnomekbd-2.28.0-1
gnome-applets-2.28.0-1 gnome-backgrounds-2.28.0-1 zenity-2.28.0-1 metacity-2.28.0-2
gnome-settings-daemon-2.28.0-1 gnome-control-center-2.28.0-1 gtkhtml-3.28.0-2
vte-0.22.2-1 gnome-desktop-sharp-2.26.0-2 gnome-doc-utils-0.18.0-1 clutter-1.0.4-1
clutter-gtk-0.10.2-1 gnome-games-2.28.0-1 gnome-games-extra-data-2.28.0-1
gnome-mag-0.15.9-1 gnome-media-2.28.1-1 gnome-netstatus-2.28.0-1
gnome-nettool-2.28.0-1 gnome-power-manager-2.28.0-1 gnome-screensaver-2.28.0-1
pangomm-2.26.0-1 gtkmm-2.18.2-1 gnome-system-monitor-2.28.0-1 gnome-terminal-2.28.0-1
gtk-engines-2.18.4-1 gnome-themes-2.28.0-1 gnome-utils-2.28.0-1 yelp-2.28.0-1
gnome2-user-docs-2.28.0-1 gok-2.28.0-1 gtk-sharp-2-2.12.9-1 gtk-vnc-0.3.9-1
hamster-applet-2.28.0-1 kdelibs-4.3.2-4 mousetweaks-2.28.0-1 nautilus-2.28.0-1
openssh-5.3p1-1 orca-2.28.0-1 perl-xyne-arch-0.82-2 seahorse-2.28.0-1
seahorse-plugins-2.28.0-1 sound-juicer-2.28.0-1 tomboy-1.0.0-1 libgdata-0.4.0-1
totem-2.28.1-1 vinagre-2.28.0.1-1 vino-2.28.0-1
Total Download Size: 298.48 MB
Total Installed Size: 1017.04 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
glib2-2.22.2-1-x86_64 2.8M 718.0K/s 00:00:04 [##############################################] 100%
openssh-5.3p1-1-x86_64 849.0K 399.5K/s 00:00:02 [##############################################] 100%
:: Retrieving packages from extra...
pygobject-2.20.0-1-... 551.4K 207.3K/s 00:00:03 [##############################################] 100%
^Cygtk-2.16.0-1-x86_64 894.7K 370.1K/s 00:00:04 [################------------------------------] 35%
Interrupt signal received
Last edited by graysky (2009-10-12 20:55:38)If you're going to use powerpill you should probably subscribe to the following thread:
http://bbs.archlinux.org/viewtopic.php?id=56583
Your answer is on the very last page, but in summary the problem is that the --retry-wait option is no longer supported in aria2 which you can see in the code you pasted.
/usr/bin/aria2c: unrecognized option '--retry-wait=2'
Xyne has already updated the code so you can either get the code from his site or wait for the mirrors to sync. -
PL/SQL: numeric or value error: character to number conversion error in TRG
Hi,
I've got strange issue with one trigger which during update of table reports (DB is 9.2.0.8):
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at "UDR_LOG", line 345
ORA-04088: error during execution of trigger 'UDR_LOG'but line 345 is:
END IF;
so its kind of strange
the code looks like
343 IF nvl(to_char(:old.PKD_ID),'''') <> nvl(to_char(:new.PKD_ID),'''') THEN
344 v_zmn := v_zmn || 'PKD_ID''' || to_char(:old.PKD_ID) || '''' || to_char(:new.PKD_ID) || '''';
345 END IF;
so its concatenation not to_number usage .error is triggered by update statement on any column .
I'm sorry I cant provide You with whole trigger code .
So if You could only recommend any investigation method that would be great .
Regards
GregHi, Greg,
When there's an error in a trigger, the line numbers in the error messages are relative to the first DECLARE or BEGIN statement; often, that's a few lines after CREATE OR REPLACE TRIGGER. Post a few lines after what you already posted.
If you can't find the error, then create another table for testing this, and create a smaller trigger on that table, which does only enough to cause the error. Then you'll be able to post the complete trigger, and the code needed to re-create the problem. -
Modifiy number of inserts and number of errors, etc variables
Hi!
i need your help...
when you execute an 'normal' interface (just copy table to another table) and then, you go to the Metadata Navigator (or operator), in each step of the ikm (and other), is a parameter that indicates de number of error, number of inserts and number of updates.
i want to set the value of this parameter manually.... knows anyone how can i do this?
i tried to add <%odiRef.setNbInsert(10)%> in one step on the IKM (after do the insert action), also alfter the step for commit action... but it doesn't work.
did i something wrong?
Thanks!haaah!!! I never realized that. For some reason, when i first started in Logic Pro 9, i had like 14 inserts already on the channel strips, and I've been working with that same template since first opening LP9 (which i've only had it since Aug 15).
So I see now, it's the friendly PluginsertSendslotfairy. :O)
Thanks! -
Hi, I moved from an area that was covered by Virgin Media to a BT area where Infinity was available. When I contacted BT I was assured that the move over should all be fine, they would handle porting the number (house is only a couple of miles away and same area code).. so I placed the order in November 2012
Once I placed the order and waited a bit, I got the installation schedule date, which was now end of December (after having been told it should take a couple of weeks).. I work from home, so internet is important
I complained about the installation date, wanted to know what the delay was and was seriously considering switching back to bog standard ADSL in return for a faster install, the new house had a BT line installed already but not active. I was told that the number porting was holding up the line activation, so they could activate a line under a new number and bring forward the installation date, which they did and I got Infinity about a week before Christmas.
I then asked about the number port, as I had been given a temporary number. I was told I would need to wait as to get my Infinity through faster, they had raised a concurrent order, and my original one needed to be marked as complete on the system for them to have a line with activated status to complete the number port...
so far ok..ish (expect for the many many hours on the phone etc)
Then my infinity order (this is the fictitious one that needed to complete in the workflow system) had the date moved into mid Jan (I had asked to terminate my Virgin account end of December).. so when they tried to port the number, as the line was no longer active, it failed.
I should point out at this stage there appears to be zero proactive response from BT to any failures, they wait for you to complain.. they don’t tell you.
So I then had to contact virgin media, ask them to activate the line again (even though I now live in a new house). After lots of calls, they obliged and activated the number at the exchange end only, for which I now have to pay line rental
I called BT again letting them know the number is now active and can they please port, and given the issues can they please hand over to the escalation team to monitor its progress.. no problem sir, don’t worry about a thing I am told
Wait over a week, still the old number, numerous calls again, get passed through to openreach porting team who clearly think I must be an engineer, as they tell me it’s an error code 41, contact LCP. I explained that some deciphering would be needed, turns out they say, that virgin media need to have my new postcode (they have my postcode for where the line is registered obviously).
I have now also provided VM with my new postcode,
My question is, who should I speak to get the customer support/escalations team to monitor this, as I am really sick and tired of calling call centres for hours, where often it is very hard to both hear them, or to have a conversation that doesn’t follow a script?? Sorry for the rant, but am quite fed upHi MattFC,
Welcome to the forum.
Please send in your details and one of the forum moderators will get back to you. You can get our contact link by clicking on my username, it's under "About me".
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Large number of errors on 6500, when using Apple MACS
Hi,
Getting large number of errors on 6500
ETHC-5-PORT FROM STP - PORT LEAVING BRIDGE - PORT JOINING BRIDGE
connected devices are apple macs running GigE.
Anyone seen this before?
Cheers
ScottHi Scott,
Can you check the speed and duplex settings on machines as well as switch ports on which you have connected apple macs? I will say to make it a manual config if you have them on auto auto settings.
Regards,
Ankur -
This question is used a translator....
Current conditions
- SW1 ----- Power injector ------ AP(cisco is not another model)
- Port, AP, Power injector, Switch <-> Injector UTP cable Problems occur even after replacement
- Power injector <->AP UTP canle No exchange
- Poe was OFF the function. This is because it is being used for Power Injector. -> Do not generate failure logs
- But even if another AP is turned ON POE function, no error messages.
SW1#show logging (5 mins cycle persists)
May 4 10:37:32.527: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/17: Power given, but Power Controller does not report Power Good
May 4 10:37:42.556: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to down
May 4 10:37:43.562: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to down
May 4 10:37:50.032: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to up
May 4 10:37:52.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to up
May 4 10:38:03.238: %ILPOWER-7-DETECT: Interface Gi1/0/17: Power Device detected: IEEE PD
SW1#show cable-diagnostics tdr interface gi 1/0/17 <----- Issues AP
TDR test last run on: May 04 10:49:14
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/17 1000M Pair A 84 +/- 10 meters Pair B Normal
Pair B 84 +/- 10 meters Pair A Normal
Pair C 84 +/- 10 meters Pair D Normal
Pair D 84 +/- 10 meters Pair C Normal
SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/18 <--------- Normal AP
TDR test last run on: May 04 11:01:04
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/18 1000M Pair A 92 +/- 10 meters Pair B Normal
Pair B 92 +/- 10 meters Pair A Normal
Pair C 92 +/- 10 meters Pair D Normal
Pair D 92 +/- 10 meters Pair C Normal
SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/1 <--------- Normal AP
TDR test last run on: May 04 11:01:56
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/1 1000M Pair A 79 +/- 10 meters Pair B Normal
Pair B 79 +/- 10 meters Pair A Normal
Pair C 79 +/- 10 meters Pair D Normal
Pair D 79 +/- 10 meters Pair C Normal
SW1#show power inline <-------- (Check every 5 seconds)
Module Available Used Remaining
(Watts) (Watts) (Watts)
1 370.0 200.2 169.8
Interface Admin Oper Power Device Class Max
(Watts)
SW1#show power inline | in 17
Gi1/0/17 auto off 0.0 n/a n/a 30.0
SW1#show power inline | in 17
Gi1/0/17 auto on 15.4 Ieee PD 0 30.0
SW1#show power inline | in 17
Gi1/0/17 auto on 15.4 Xirrus XR2426, 1.0G 0 30.0
SW1#show power inline | in 17
Gi1/0/17 auto faulty 0.0 n/a n/a 30.0
SW1#show power inline | in 17
Gi1/0/17 auto off 0.0 n/a n/a 30.0Plug the Xirrus AP directly to the switch port and see if the logs go away or not.
-
when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
How do I go about transferring my iPhone 4s to another number on my plan?
I want to transfer my iPhone 4s to another number on my account and that phone to this number. In what order should I perform this task and how do I deal with the transfer of contacts. The other device is a LG ENV and has been backed up using vzbackup. The existing iPhone has been backed up to the cloud but will use a different apple ID when transferred.
Use a different phone and call *611 for them to switch them so you can keep the insurance if you have any.
-
TS4006 how do I add another number to my icloud?
I need to locate another phone that is not listed on my icloud how do I add another number?
hi,you have to sign-in into the icloud setting on your device with your apple id to turn on that "FIND MY IPHONE" function....
-
Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.
Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with. -
Process Flow: Maximum number of errors
Hello!
When executing a mapping through Process Flow, “Maximum number of errors” is set to 50 and the mapping returns 5 errors. Will the mapping return SUCCESS, WARNING or ERROR?
Best regards,
Tina N MörnstamThis Thread already exists.
Sorry
Tina -
Numeric or value error: character to number conversion error
I'm having problems inserting a value from a date picker field (DD-MON-YYYY HH MI )
i'm submitting this value to a packaged procedure that accepts this field as VARCHAR2 .
on the insert, i do a to_date( P_DATE, 'DD-MON-YYYY HH:MI PM' )
and i get the numeric conversion error.
If I change the to_date on the procedure side, I get the :could not read the end of the format mask - which I've found threads about on this site.
I've tried using HH24 and different formats, but I get one of the two above errors on the insert.
If I don't fill in the datepicker field at all, it works fine.
help is appreciated !
BillHere is the trace anyway:
*** ACTION NAME:(application 4000, page 1) 2004-09-24 12:58:44.052
*** MODULE NAME:(HTML DB) 2004-09-24 12:58:44.052
*** SERVICE NAME:(TOPS) 2004-09-24 12:58:44.052
*** SESSION ID:(151.1) 2004-09-24 12:58:44.052
*** 2004-09-24 12:58:44.052
ksedmp: internal or fatal error
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Current SQL statement for this session:
declare
rc__ number;
begin
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 255;
null;
null;
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
:rc__ := rc__;
end;
----- PL/SQL Call Stack -----
object line object
handle number name
6A3C4A00 532 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A3C4A00 2502 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A3C4A00 2748 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A0E63C8 991 package body FLOWS_010500.WWV_FLOW_FORMS
6A11675C 932 package body FLOWS_010500.WWV_FLOW_DISP_PAGE_PLUGS
6A11675C 247 package body FLOWS_010500.WWV_FLOW_DISP_PAGE_PLUGS
6A4B54E0 8341 package body FLOWS_010500.WWV_FLOW
6A2A99F0 102 procedure FLOWS_010500.F
6A2B9E54 10 anonymous block
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp+524 CALLrel ksedst+0 1
ksedmptracecb+15 CALLrel _ksedmp+0 C
_ksddoa+118 CALLreg 00000000 C
ksdpcg+143 CALLrel ksddoa+0
ksdpec+180 CALLrel ksdpcg+0 1966 6D7D208 1
__PGOSF3__ksfpec+11 CALLrel _ksdpec+0 0
8
_kgerev+77 CALLreg 00000000 7474210 1966
kgerec1+18 CALLrel kgerev+0 7474210 6DCE5EC 1966 1
6D7D260
peirve+465 CALLrel kgerec1+0
pevmCVTCN+346 CALLrel _peirve+0
pfrinstrCVTCN+36 CALLrel pevmCVTCN+0 6E6E604 71CE370 7160F0C
pfrrunno_tool+51 CALL??? 00000000
pfrrun+1834 CALLrel pfrrun_no_tool+0 6E6E604 6A3C010A 6E6E640
plsqlrun+1051 CALLrel _pfrrun+0 6E6E604
peicnt+179 CALLrel plsql_run+0 6E6E604 1 0
kkxexe+477 CALLrel peicnt+0
opiexe+4896 CALLrel kkxexe+0 6A2B9E54
kpoal8+1705 CALLrel opiexe+0 49 3 6D7E06C
_opiodr+977 CALLreg 00000000 5E 14 6D7E7CC
_ttcpip+1827 CALLreg 00000000 5E 14 6D7E7CC 0
_opitsk+1098 CALL??? 00000000
opiino+938 CALLrel opitsk+0 0 0 747ABC0 6DEFB14 D8 0
_opiodr+977 CALLreg 00000000 3C 4 6D7FBBC
opidrv+479 CALLrel opiodr+0 3C 4 6D7FBBC 0
sou2o+45 CALLrel opidrv+0 3C 4 6D7FBBC
opimai+237 CALLrel sou2o+0
OracleThreadStart@ CALLrel opimai+0
4+899
77E7D338 CALLreg 00000000 -
Re: Error, numeric or value error: character to number conversion error
Can someone please please tell me why I'm getting this error and what I'm doing wrong? It looks like a simple error, "numeric or value error: character to number conversion error".
My code is as follows:
string connectionString = WebConfigurationManager.ConnectionStrings["DEMO_TEST"].ConnectionString;
OracleConnection con = new OracleConnection(connectionString);
OracleCommand cmd = new OracleCommand("DEMO.PKG_LOCATION_TYPE.INS", con);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new OracleParameter("@P_DESCRIPTION", OracleDbType.Varchar2, 60));
cmd.Parameters["@P_DESCRIPTION"].Value = "Test_Description";
cmd.Parameters.Add(new OracleParameter("@P_NAME", OracleDbType.Varchar2, 6));
cmd.Parameters["@P_NAME"].Value = "Test_Name";
cmd.Parameters.Add(new OracleParameter("@P_LOCATION_TYPE_CD", OracleDbType.Decimal, 4));
cmd.Parameters["@P_LOCATION_TYPE_CD"].Direction = ParameterDirection.InputOutput;
con.Open();
try
cmd.ExecuteNonQuery();
catch
//In case of an error
finally
con.Close();
con.Dispose();
And I recieve the following error block:
Oracle.DataAccess.Client.OracleException was unhandled by user code
Message="ORA-06502: PL/SQL: numeric or value error: character to number conversion error\nORA-06512: at line 1"
Source="Oracle Data Provider for .NET"
DataSource="demotest"
Number=6502
Procedure="DEMO.PKG_LOCATION_TYPE.INS"
StackTrace:
at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src)
at Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery()
at System.Web.UI.WebControls.Wizard.OnFinishButtonClick(WizardNavigationEventArgs e)
at System.Web.UI.WebControls.Wizard.OnBubbleEvent(Object source, EventArgs e)
at System.Web.UI.WebControls.Wizard.WizardChildTable.OnBubbleEvent(Object source, EventArgs args)
at System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args)
at System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
********************************************************Are the parameters in your procedure in the same order as they are created in this code? Oracle command works by position unless you change it to be BindByName.
Failing that you seem to have defined a parameter (P_NAME) to have a length of 6, and are then setting it's value to a string with a length of 9.
Also the in/output parameter is defined as type decimal. Is this correct? It is defined as InputOutput but you don't assign it any value.
If these suggestions don't help then perhaps if you post the stored procedure you might get some more ideas.
HTH
Lyndon
Maybe you are looking for
-
Dear Gurus, while creating PO,we are giving tax code and it will calculate tax amount.This will show separate line item in MIRO but i want to calculate this tax amount added to landed cost of a material.
-
How to display meesage in JSP from DAO.java
Hi all, I have a Dao.java coding where i have my oracle queries executed.i have separate functions for every query.It should return boolean value.If the 1st functions returns true,then the second function should be called.if it returns false,i have t
-
Php changing to php.html when opening in DW
I got some files from another designer and the home page is index.php however, when I open it in dreamweaver, it changes the name to index.php.html. It also changes, ie it's no longer centered. I tried over and over to get it not to, but it keeps doi
-
Hello, I have been using iTunes for years now, since it was first ported to the PC, and love it. However, one thing that will completely turn me away from the application is that iTunes truncates the filenames that I give tracks when importing. Much
-
Opening Illustrator 5.5 files on Macintosh 7.5.1
Hi, I'm seeking advice on how to open Ilustrator 5.5 files on an old Macintosh Performa 580CD (7.5.1). These files were given to me on double density disks and I can only access their content on this specific computer. Unfortunately the computer does