Another one to add to the LONG list...

I guess I will just add my 2 cents to this discussion. The iPhone 3G is incredibly slow with the 4.01 firmware. It lags when doing almost anything. Even a simple task of unlocking the phone takes forever and once I can actually slide the bar, it does not click and unlock for several seconds.
Don't these people actually test this firmware on the devices before releasing it to the public. Apple is VERY, VERY SLOPPY these days. A Droid is looking more and more inviting. I am nearing the end of my contract and may go that direction. Don't get me wrong, I LOVED my iPhone, but it is now a bad daily experience for me when using my phone. I also LOVE my iPad. But, it is fast with no such problems. It is almost like they slow the thing down on purpose to make you want to upgrade to the new model. But, that would be a conspiracy and Apple would never do that, right?

Tell Apple:
http://www.apple.com/feedback

Similar Messages

TS2634 MY IPOD 5G DOSNT WANT TO CHARGE I HAVE WITH IT 4 DAYS CAN I CHANGE IT FOR ANOTHER ONE I DIDNT BUY THE WY OR TE PROTECTIONHARANT

PLEASE HELP ME I AM WONDERING IF I CAN CHANDE MY IPOD FOR ANOTHER ONE I DIDNT BUY THE WARANTY OR THE PROTECTION BUT I JUST HAVE 4 DAYS WHITH IT

Yes, just go in and explain the problem. If you have the receipt thats ok but it is not required, the can verify the warranty using the serial number. They may run some diagnostics on it, and if there is indeed a hardware issue then you will get a replacement.

F I have burnt a playlist of mp3's to a CD and want to burn another one onto the same CD, will it overwrite the first one or add to the CD?

I know that mp3's take up less space, so I didn't realize I could've probably burnt a lot more files onto the CD. I burnt 10. I'd like to add more. Will it add them, overwrite what I already burnt or what? Just wondering before I do it. Thanks!
[I'm using a PC with Windows 7]

If the disc is erasable then erase and burn all the tracks as desired. Audio CDs need to burned in one continuous action and the session closed. With data discs it may be possible to add to a previous session, but I don't know if iTunes supports that feature, and not every reader does which could be an issue.
tt2

I lost my filter plug ins when I install Elements 13. If I choose one plug in in Preferences it installs it. But if I try to choose another one it just replaces the first one. How do I install multiple filter plug ins?

I lost my filter plug ins when I installed Elements 13, i.e. Topaz Labs, Nik. If choose one plugin in preferences it will add it to the filter list. But if I try to add another filter it just replaces the first one.
How can I get my multiple plugins back?

Sorry to jump on this thread, but it seems like I have a similar problem. Oh. BTW, Happy New Year!
I have filters from Topaz, Imagenomic, ePaperPress, and Redfield. In the past when a new version of PSE came out, I just copied and pasted the folders w/ the ".8bf" files into the Plug-Ins folder of the new version. This time it didn't work.
I have been searching for a clue. I came across a confusing comment in a post from some Adobe gal [that has been linked multiple times. It said:
"Please click on Photoshop Elements in the top left corner and select 'Preferences'." The confusing thing about this is that I have no "Photoshop Elements" in the top left corner! As this is the first step, I'm stuck there...
Here is what I see in the upper-left corner:
When I click on the Elements 13 Logo, I get a small drop-down menu that has no "Preferences" option. I have versions of PSE back to 10 and none of them have "Photoshop Elements" in the top-left corner.
BTW, I'm running Win 7 Home 64.
I noticed that PSE 13 loaded into my Program Files folder, whereas all previous versions went to my Program Files (x86) folder. That indicates that 13 is running as a 64-bit app? Does that require different plugins?

IPad 2 playing of all music videos in the folder is not possible. You can play a music video (all purchased from iTunes) but once is finished you have to manually select another one. This defeats the whole concept of having a music video library

How could we play all music videos within the music folder in the iPad2 ? In other words, select all, choose random, and click play and all music videos will automatically play upon completion of the one been viewed without the user having to deselect another video manually (annoying interrupt).
Currently you have to choose each music video and upon completion choose the next one manually. That defeats the whole concept of a music video library.
This does not happen on previous iPad or MacBook Pro iTunes!!!!!
Very annoying.
Thanks,
WMR

You can try leaving feedback : http://www.apple.com/feedback/ipad.html

What happened to my the long list of "Notes"?

iPhone 4s. From Sept. to recently, I was adding almost daily to a list in "Notes." One day, my list was gone and I seemed to be in a "calendar" mode. After fiddling arond and not knowng how to go backwards, I entered a few notes on a few days. Each day is a page. I can go backwards for a few days but still can't go back to my Sept. wonderful and needed list. I don't think it is lost or gone. I think it is inaccessible because I don't know how to make "Notes" go back far enough. In any event, I sure would like my list back! Thank you in advance for your assistance.

DarreniTunes Store Customer supporthttp://www.apple.com/support/itunes/wwHello James,Thank you for contacting the iTunes Store Support. My name is Darren and I am here to assist you today!From your request, I understand that you cannot recall your security questions and are currently unable to purchase anything from the iTunes Store. I can definitely appreciate your desire to have this issue resolved, so you are able to access your iTunes Store account again. I am delighted to guide you in the department that can help you with this issue.I would like to let you know that for security reasons, you will need to contact our Account Security team to receive assistance with resetting your security questions. I apologize for any inconvenience this may cause, however Apple takes the security of our customer's accounts very seriously, which is why we have a specialized team who deal with these types of issues.You can contact the Account Security Team by navigating to:https://expresslane.apple.com/From there, choose:iTunes > iTunes StoreThen for Topic choose Account Management > Lost or Forgotten Apple ID password (any concerns regarding security questions also fall under this category)Choose ContinueYou will be given the options to Talk to Apple Support Now or Call Apple Support Later, please choose the option that works best for you. If the hold time is long, you may only have the option to talk with them later.I do hope that this information and the resources that I've provided will prove helpful in resolving your issue James.In the meantime, if you have any other questions or concerns, please feel free to contact me. Enjoy the rest of your day!Sincerely,DarreniTunes Store Customer supporthttp://www.apple.com/support/itunes/ww

My iPod was stolen and I am going to get another one, if I used the same email I used for the first one, will the updates I get on my new one still go to my old one? Like messages and email and stuff?

I don't want the person to be able to hack into the iPod past the lock sreen and be able to read my new messages. Is there anyway to stop this?

Im pretty sure that if they want to update the stolen ipod that they need the apple id password, but with the mail it just updates new mail by its self. Hope that helps

An incorrect email address I put in the BCC field has repeated itself infinitely and blocked outgoing messages. I can select but not delete the long list from the Warning. What can I do?

I put an incorrect email address in the BCC field of an email. A 'Warning' dropped down where the address was repeated until it fell off the bottom of the screen. No closure button at the top so I can't close it. I can select all the repeat addresses but can't delete them. I can't shut down or restart the computer because Mail can't close. Any ideas, please?

Aha! Pressed escape button and managed finally to close the Warning. Phew! I could then erase several hundred repeats of the mistaken address from the BCC field. Sorry to bother you all. Hellen.

With my old Explorer XP, I regularly cleared the long list of cookies/history by going to "control panel" - "internet options" - "settings:" - "view files". Now I do not see any cookies or web history .. How do I see that now ?????

Those are the steps I would take using the old internet explorer. I do not see any browsing history, web threads, or cookies with the Foxfire. Were is that information and or can I see it some where, somehow. ??

See this support article: <br />
https://support.mozilla.com/en-US/kb/Clear%20Recent%20History

I have a long list of bookmarks. They are not sorted. They do not appear anywhere in the "organize bookmarks" window. Where are they? I want to delete a bunch of them but can't find a way.

This is Firefox 3.6.8 and Mac OS 10.5.8.
Right clicking on a bookmark does nothing. I don't know if that is a Firefox version issue or a mouse issue, but the mouse can right click on the Mac OS desktop and get the usual menus.
It is possible for me to delete bookmarks which still point to an active web page because there I can use the star to edit the bookmark. That is way too cumbersome a process for the long list I have. Some are old and no longer point to an active page. The star comes up empty in those cases anyway and I can do nothing about the bookmark.
Bottom line is that I just need a way to see the whole list and choose the ones to delete.
I thought they should all show up in the unsorted bookmarks folder but it is empty. That may be the crux of the problem.

Update - I discovered that the entire list of bookmarks can be accessed in the Organize Bookmarks window by clicking on the icon for Bookmarks Menu.
This seem like odd interface behaviour to me.
All the other software I use follows the pattern that an icon with a triangle to the left, which you click on to expand the menu tree downwards, shows the entire contents of the category when you click on the triangle. In other words, you don't get a different response by clicking on the icon from what you get by clicking on the triangle.
It also seems odd to me that when an unsorted bookmarks folder is automatically provided that unsorted bookmarks would not be placed there by default.
Anyway, by getting the list of bookmarks displayed this way I was able to simply right-click on items in the list and delete them, as I thought I should be able to do. Problem solved. Organize Bookmarks interface found to be somewhat unintuitive.

My bookmarks will not "sort" on one list, instead they make a short list right before the main list, so how do I get them to all go into the same list?

When I put my bookmarks in "Bookmarks Menu", and sort them by "name", there is a short list of alphabetized names, then the main list of alphabetized names. They are all in the "Bookmarks Menu" file, but won't merge, for some reason. It is as if they were in a separate file, but they aren't. I might be able to move them manually, by dragging them, but that is a major inconvenience. I usually rename the individual sites, so I can remember them, but that seems to make no difference, as all the main list will alphabetize with no problem....

Thanks for the response, cor-el....Seems like I've seen your name and help on the Secunia forum, maybe? And it does seem like I have a separator, but that is not the case. After opening the manager, and all bookmarks, the "Bookmarks Menu", by double clicking, shows 4 separators, and the fourth section has two alphabetized lists, (without a separators) The first list is about thirty, and the second list of all the rest, 100+. I've looked all through the two referrals you mention, and nothing fits. I just downloaded the "SortPlaces" add-on and will see if that works out just to get around the "short list" that tends to throw me off in looking up bookmarks in the main (longer list). Thanks for your suggestions, I will let you know how it works out, but tonite I am ready for the sack....manana..
PS. I am including a screenshot that shows how it is organized, with the short list on the top, and the start of the "A's" on the longer list....(couldn't get any more on the page for the screenshot)

How to enter values in the selected list by pressing f4

Hi Gurus,
I have a problem can any one help me in solving this?
When we go to any table thorugh se11 or se16 to display all the records based on the selective fields like pernr, company code, benefit plan in a Z-table
Here when I want to display records of selected benefit plans by using the field bplan. here when I go to that bplan field and press f4 then gives me a list of benefit plans, from that list I have to select proper benefitplan for selected records of that plan
1. Question:
I have two new plans , can any suggest me how to add in the f4 list of that field. Is it done through any program?
Another issue,
I have a report program, when I execute it gives me selected list fields like pernr, date, and some more fields. if you select some fields with the help of f4 , we can choose correct value,
2 Question,
I have two new parameters to be added in the f4 list of the fields in the Needed very urgent?
Thanks
Ravi

Hi
You can create a search for that field with more than one fields and yu can add the search help for that field
see the doc
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
You can add F4 values for that field using the following
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Regards
Anji

Long list of problems I had, culminating in iPhone no longer powering on.

So, let me start off by saying, there is no Apple Store available save by taking a plane to another island.
Anyway, awhile back when I updated my phone to a new version (I don't remember which), a bunch of things started happening.
1. No WiFi, it was grayed out, and inaccessible.
2. Would not ring if someone called me while the phone was on standby, except sometimes if it was plugged in and charging.
3. Calls would sporadically fail, and signal strength would alternate between full bars to none, to showing "No Service", and sometimes would show "No Sim". I could usually (not always) get service or signal strength back by toggling airplane mode on or off, but the only way to get rid of "No Sim" was to power it on and off.
4. Clock would always show the wrong time. It would seemingly stick at say... 3:40.. even though it was 6:00, then suddenly before my eyes jump forward 2 hours to the right time or still a bit behind. This also caused the alarm functions to not work, because it would usually skip over the time it was supposed to go off.
5. Error messages would occasionally flash on the screen, but disappear so quickly as to be nearly unreadable, sometimes saying "Please connect to iTunes" but it hadn't done that one in awhile.
6. A general sluggishness at times, also weird delays on sounds or none at all. I.E. I'd take off standby (wouldn't make swish sound), start to type a text message, only there'd be no sound while typing, but then 30 seconds later it'd make the swish sound it normally makes as you take it off standby, and resume clicking when typing.
Restoring it through iTunes would not help at all.
Anyway, so today, I tried restoring it like 6 times in a row out of pure frustration, and it like got stuck in recovery mode while rebooting, and when iTunes was restarting it, it just turned off.
The iPhone will no longer turn on, even when plugging it in to my computer or to the outlet charger, no matter if I hold power or home button or both.
Update: I just got it to power on again, about an hour after I was last trying fruitlessly. I restored it again, so it's "working" albeit with the long list of problems above still.
Message was edited by: Dryesias
Message was edited by: Dryesias

If you regularly sync your iPhone, you won't lose ANY info when restoring.
iTunes creates and maintains a backup of your iPhone - which is updated if needed as the very first step during the sync process. The backup stores all your iPhone settings, SMS messages, notes created with the Notes application, recent calls, call favorites, visual voicemail messages, and photos captured by your iPhone - basically all data stored on your iPhone not included with the sync process.
Your iPhone has not died - not yet, but it has developed a problem which requires a Restore.
It isn't required to have an Apple Store near you. This can be handled over the phone by calling AppleCare (800) 694-7466, but I venture to say that AppleCare will try to troubleshoot the problem over the phone before having your iPhone picked up for inspection and testing, which will very likely include a Restore just as the error message provided indicates. You can do it now, which will probably resolve the problem, or wait and do it when calling AppleCare.

When i open firefox it instantly goes to the bottom of the page then opens a new one. i cant close the pages down the bottom and they are running in the background slowly everything down

when i open firefox it immediately goes to the bottom tool bar and keeps running. a new home page then opens and i cant close the one at the bottom because there is no icon. these hidden pages keep playing old youtube song and another one with adds running. how do i close these pages please? also if i minimise firefox to go onto say, email, i cant retrieve it and have to then open another home page. argggghhhhhhhh. help please. thanks and have a great, 'quiet' day. beth

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Long list of presets.

The long list of Presets in Grid Mode are useless to me. I only ever use two that I have made. One for basic import, and one for B&W. I would like to be able to delete all the long list of built in ones. Or have a toggle switch as in Develop to hide them. At least, have custom ones show up at the top of the list instead of needing to scroll all the way to the bottom every time I want to use my presets.

I posted the same request a while ago. After finally finding a way to get rid of them they showed up again after updating to 3.3. Damned!

Another one to add to the LONG list...

Similar Messages

Maybe you are looking for