Another operation in  mediator

how to add another operation in a mediator in design....not in source
Edited by: 929451 on Apr 22, 2012 11:59 PM

Well, if your mediator is based on a wsdl than all you have to do is to add the said operation in your wsdl and then Save All. Hit refresh. And you should see the additional operation created in your mediator at design time.
Hope this helps.

Similar Messages

  • Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

    Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
    Thanks in advance.

    1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
    2. No; if you use an emulator, it may install system components. Back it up anyway.
    (110033)

  • Hello. I don't live in the U.S. and I'd like to buy a new mini IPad retina. But I see it is offered with four mobile operators. Does that mean I cannot use another operator, in my country, with it?

    Hello. I don't live in the U.S. and I'd like to buy a new mini IPad retina. But I see it is offered with four mobile operators. Does that mean I cannot use another operator, in my country, with it?

    Hello. I don't live in the U.S. and I'd like to buy a new mini IPad retina. But I see it is offered with four mobile operators. Does that mean I cannot use another operator, in my country, with it?

  • Another user or another operation modified data

    I have a problem in updating document numbering setup in AP invoice
    Another user or another operation modified data; to continue, open the window again  '' (NNM1) (ODBC -2039)  [Message 131-183]
    SAP 8.81. PL07
    I disabled also all Add-ons , but still the problem continue,
    Thanks

    hi,
    when setting document numbering series it is recommended that you should have an exclusive access in the database. to achieve this you need to lock all users except your username. in the way no other user can log on in the system. also you need to use a superuser account.
    regards,
    Fidel

  • Can I use T-Mobile contract free with another operator in another country?

    Can I use T-Mobile contract free with another operator in another country?

    No. You need an officially unlocked iPhone. Contract free DOES NOT equal officially unlocked. All contract free means is that you are not obligated to a contract, nothing more.
    In the US, only Apple sells officially unlocked iPhones.

  • Another user or another operation modified data,to continue open windows

    Saludos Estimados:
                                    tengo la siguiente situación, tengo un cliente que gestiona sus cuentas a nivel articulo, estamos actualizando sus cuentas ya que algunas apuntaron mal, pero cuando lo hacemos por DTW manda el siguiente error
    another user or another operation modified data,to continue, open windows again (OBDC-2039) Application-defined or object-defined error65171

    esta es la nota de SAP  que nos sugirio y se soluciono.
    When you update the warehouse info via DTW, you need to set the LineNum value in ItemWarehouseInfo that corresonds to the warehouse in Item Master Data.
    That means the LineNum value match warehouse list number minus 1.
    In your case it seems you just used 0,1,2,3,4 but it does not necessarily match the order of the warehouses.
    So for example if you have 4 warehouses in the database
    1 Test
    2 Ware
    3 House
    4 DTW
    then when you update properties of the warehouse the LineNum is 0 for warehouse Test, 1 for warehouse Ware and so on (please refer to note 1328706).
    Should you have any further questions related to this issue please do not hesitate to contact us.
    Kindly confirm the message at your earliest convenience after successfully testing it.

  • Another operating system

    Hello:
    I'm looking for another operating system. I am very tiered from WinXP and I wont to install the apple operating system?
    Can I do that? I heard that the new apple system works on intel??
    Help please

    Hi Khawar;
    I am in complete agreement with you on WinXP but Mac OS X will only work on Apple hardware with Intel. Sorry.
    About the least expensive way to get into Mac OS X is the Mac Mini.
    By the way where about are you located in the Netherlands? I was stationed there with the USAF from 68 to 72. I really enjoy my assignment to the Netherlands.
    Allan

  • Micro sim for another operator

    i operator for iPAD is AT&T but i have another operator for another country can i use it or locked ??????

    iPads are not locked to a particular carrier.
    Regards.

  • Can i have another operating system, like microsoft 7?

    can i have another operating system on an apple desktop?
    never had an apple befor

    If your Mac is new, you need another forum:
    iMac (Intel)
    The one you found is for iMacs made before 2006

  • How do I add another operating system for Dual boot in Windows 8.1 boot configuration?

    Hello,
    I am trying to create a dual-boot Windows 8.1 Pro system to allow both 32bit and 64 bit Windows 8.1 versions.  I currently have Windows 8.1 32bit installed.  Appreciate some background on how to add 64bit Windows 8.1.
    Thanks, in advance.

    The easiest way is to do this (this assumes some technical knowledge as well as access to the currently installed operating system and the 64bit install files)
    1: launch diskpart from run or cmd
    2: select the current OS disk using "select disk 0"
    3: select the current OS volume using "select partition x" where x is the number of partition (you can use "list partition" to see all current partitions)
    4: enter "shrink minimum=xxxxx" where xxxxx is the size in megabytes you want to new OS to have
    5: Enter "create partition primary"
    6: Enter "format quick fs=ntfs label="Windows x64""
    7: Enter "assign letter y"
    8: select your current system partition using "select partition x" where x is the number of partition. If you have a UEFI install on a GPT disk, this partition will be formatted in fat32. Otherwise, it will be a 100mb NTFS partition
    9: Enter "assign letter s"
    10: exit diskpart, and open up an administrator cmd prompt
    11: Enter "dism /get-imageinfo /imagefile:e:\sources\install.wim" where e: is the drive letter that you have your .iso mounted in. If you have the iso extracted, you can just point to the current extracted area then \sources.install.wim. This will
    show you a list of indexes that the .wim file supports. A standard retail version of the .iso will have Windows 8 Pro be index 1. If it is not, just change the index number in the next command.
    12: Enter "dism /apply-image /imagefile:e:\sources\install.wim /index:1 /applydir:y:"
    13: Enter "bcdboot y:\windows /s s: /f UEFI" (if you are using a MBR disk and not UEFI with a GPT disk, enter /f BIOS instead)
    14: Reboot, select the x64 partition in the menu that comes up, and you are good to go!
    You can also just create a new partition using disk manager then boot to the x64 disk and install it to the new partition, but that runs the risk of accidentally installing over something that shouldn't be if you select the wrong disk.

  • How can I best add, most easily use, another operating system like Whonix to my mac laptop?

    I am hoping I can go to an added user. But I think I need to understand what Parallels are as that may be what I need to add.
    Thanks,
    J

    A virtual machine software package is a hunk of software that presents itself as computing hardware to the guest operating system software.  The operating system software running as a guest within the virtual machine reads and writes memory and devices as it would do normally (when booted on physical hardware), and the virtual machine detects and translates these accesses and (hopefully) provides the responses expected by the guest operating system.  For input and output to the user or to storage or network devices, the virtual machine can be coded to potentially pass through the read and write access to real hardware and real hardware I/O registers, or the virtual machine might be coded to simulate hardware; what are called virtual devices.
    This virtual machinary as differentiated from dual- or triple-booting via separate disks, or via Apple's shared-partition Boot Camp software.  In these cases, the operating system is booting directly on the hardware involved.  Shut down and reboot to swap operating systems.
    The Whonix distribution specifically targets privacy, and I'm not sure I'd want to run that as a guest, as the virtual machine or the host operating system that the virtual machine is running on probably doesn't have the same focus, and (if you're truely paranoid) might well report the presence of at least the virtual machine via (even entirely innocent) bug reports or crashes or such.  This configuration might work as might dual-booting into Whonix via Boot Camp, though whether these configurations might leak information would have to be verified.
    It'd probably be best to check with the Whonix folks directly around what they recommend, what's been tested, and what to look out for.  In cases such as this one, having, knowing, operating and maintaining the configuration properly is key, and that discussion is far beyond what's usual here in the Apple forums.

  • Can I upgrade the OSX V 10.7 Lion to another operational system without risc to lose the instaled programs?

    How can I upgrade the Mac OS X 10.7.5 to better operational system?

    Back up your data, check your applications for compatibility, and try downloading Yosemite from the Mac App Store. If you get told that it's incompatible, your computer can't be upgraded past 10.7.5.
    Upgrading the OS always carries the risk of losing data that hasn't been backed up. It isn't possible to foresee all problems associated with this.
    (124264)

  • Can I run another operation system via external hard drive?!

    i have a macbook pro retina display and i want to run another os system but on an external drive is it possible!?

    The two are actually solvable as one which is why I suggested this, but it is your question and you can continue working on both if you so choose.
    If you get an external hard drive or storage, you attach that to the MBPr and then use Disk Utility, found in Finder > Applications > Utilities, to partition and format the external hard drive.  To do that:
    Attach the external drive, then open Disk Utility.
    In the left side panel of Disk Utility, select the external drive you have attached, make sure you are selecting the external and not the internal.
    In the right or main window of Disk Utility, select Partition from the buttons at the top center of the window.
    Select the number of partitions you want on the external drive, and you can set their sizes.  Then click so as to highlight them one at a time.
    Give the highlightes partition a name, then select the format as Mac OS Extended (Journaled)
    Select the partition table to be GUID
    Then Apply and the partition will be formatted to be compatible with Mac OS X.
    When your are finished just Quit Disk Utility.
    You now have a Mac OS X formatted external drive that you can use as storage for the software and data that you want to use.  You do not need to boot from that storage, boot normally but direct your applications to use the external drive as the storage location.
    if you DO want to make that drive a bootable drive, we can discuss that next.

  • How to add another operating system for Dual boot in Windows 7 boot configuration

    Hi,
    I have dell laptop with excellent configuration. On which i had windows 7 Home premium on C Drive and Windows server 2008 on D Drive.
    Now i upgraded my Windows 7 Home Premium 32 bit to Windows 7 Ultimate 64 bit. But after fresh installation of Win 7 Ultimate my dual boot screen has gone and Win 7 is getting start directly.
    Now i want to add my Windows server 2008 again for dual boot which is still on D Drive.
    Can anyone please tell me how to add windows 2008 boot option in boot configuration to active my dual boot options.
    Thanks

    1) Using bcdedit.exe /enum
    To enable the computer to also boot Windows 7 you again use bcdedit.exe with the following command which will copy the current Windows
    Boot Loader details for Windows Server 2008 to Windows 7.
     bcdedit.exe /copy
    {current} /d "Microsoft Windows 7"
     bcdedit.exe will
    respond with something like the following.
    The
    entry was successfully copied to {................................}.
    Using
    bcdedit.exe /enum to again enumerate through the current entries within the BCD store you'll see the newly added entry.
    Before you can use the newly created Windows boot loader configuration, you'll need to change the partition for Windows 7 using
    the following two bcdedit.exe commands.
    bcdedit.exe /set {.................................} device partition=D:
    bcdedit.exe /set {.................................} osdevice partition=D:
    If you now reboot the system you should now be able to boot into either Windows Server 2008 or Windows 7.

  • Can i have another operating system in my external hard disk??

    for example windows or linux only in my external hard disk meanwhile in my macbook is tiger

    Yes, you can if you partition the hard drive. If you want both Windows and Linux, then you need to create three partitions. Your OS X partition must use the GUID partition scheme, but the other partitions must be MBR. Unfortunately, you cannot have two different partition schemes on the same drive. There have been schemes devised to create the different partition schemes needed on a single drive. If you visit www.macosxhints.com you can search for the couple of 'hints' that provide information on how that's done.
    If all you want is a Windows partition, then the best thing to do is use Boot Camp to create the partition. You can download the Boot Camp beta directly from Apple's download site. If you do some forum searching you will find many threads discussing the use of Boot Camp and Windows on Intel Macs.

Maybe you are looking for

  • Is there a way to have a text box continue onto a new page

    I can no longer link text boxes from one page to the next. So, I want to create a text box and just have it continue onto a new page, and then another page, etc., etc. because there are things we want to do with that text....that's why it's in a text

  • How Can I Check if my Windows Phone is Refurbished...

    Hey, Im going to buy the lumia 920 and the price that the store gave to me sounds little too much *cheap* So i want to confirm that the phone is Factory-new and not Refurbished while im buying the phone. How can i do that? There's any kind of code? c

  • Garnishment deduction amount greater than non exempt amount ??

    Hi all, Here is my doubt . Say my garnishment deduction is 150$ and the minimum limit(non exempt ) to be deducted is only 100$ , What will happen when I run the payroll for the employee ? Will he be errored out and written to the match code ? Will th

  • Explain plan on Update statement in function

    All, I have an update statement in a function and my explain plan shows: "Optimizer"     "Cost"     "Cardinality"     "Bytes"      "UPDATE STATEMENT"     "ALL_ROWS"     "2"     "1"     "7"      "UPDATE user.<table_name>"     ""     ""     ""     ""  

  • Regarding Wage Type

    Dear Sapients, I have created eight wage types in IT0014. In IMG Payroll International - Reporting for Posting Payroll Results to Accounting - Activities in HR System - Maintain Wage Types - Define Posting Characteristics of Wage Types I could see on