Another PCI video card issue

Hello,
I bought my daughter this Lenovo 3000 h210 from Tigerdirect.com
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4167690&CatId=2630
She has an nVidia gForce 8450 PCI card she wants to put in the 1 vacant PCI slot. When she does that, the machine will not even boot up. If she takes the card back out, it boots up fine.
The PCI card does not require a seperate power connection, and she replaced the OEM power supply with a 550w one.
I keep reading about possibly having to go into the BIOS and disable the onboard video. I don't have direct access to that computer since she lives in another state, but she is telling me that there are only 2 choices, PCI-PEG and PEG-PCI. She says she had tried both settings and it still will not boot with the PCI graphics card installed.
Any idea how to fix this?

I was unable to find an answer, but was able to get the machine up and running. They took the PCI card back and swapped it for a PCI Express card. They plugged that one in and it worked immediately. So, I am guessing that this particular machine will not work with a PCI video card.
I hope this helps someone.

Similar Messages

  • Windows 7 - Pci-to-Pci Bridge (Error: Code 10) - PCI Video Card

    Before I state my issues I will list what I'm running and what I'm trying to accomplish.
    I'm running Windows 7 Enterprise 64-bit edition, not the Beta or RC. I have 3 video cards in my possession (listed below).
    - (PCIe) Evga GTX260
    - (PCI) Evga 9400GT
    - (PCI) Evga Fx5500
    Out of those 3 cards I only use the GTX260 and the 9400GT. I had to 'retire' the Fx5500 because the latest WHQL (certified) drivers only provide support as far down as the "6 series" Nvidia cards. Unfortunately the Fx5500 is a "5 series" and falls below that line. I have already tried to use the GTX260 and Fx5500 in previous versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same make of video card - you'll get nothing but errors. There is the option of going to a place like guru3d.com and downloading a custom supported driver that covers both the GTX260 and Fx5500, but the drivers are not certified and lack support. Therefore, I purchased and now use the 9400GT which is covered under the drivers for the GTX260 and eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.
    Now that you have some background info here is my issue Whenever I install the 9400GT I get a second 'pci-to-pci bridge' entry (the other entry has no errors) that shows up under 'System Devices' in the Device Manager. The second pci-to-pci bridge entry has a yellow triangle with an exclamation mark on it that refers to a problem. When you check the properties of this device it more or less says that Windows has detected a problem (Error Code 10). The GTX260 still works and even shows up under the 'Display Adapters' as a GTX260, but no entry for the 9400GT exists. I have tried the 9400GT in both PCI slots and each time it does the same thing. If I pull out the GTX260 and ONLY run the 9400GT, I still get the pci-to-pci bridge issue, BUT I do get a picture and can boot into Windows 7 without a hitch. When I do this there is still nothing listed under the 'Display Adapters' as a 9400GT or even a VGA compatible device.
    After messing around with this for 10 hours (yes, I said 10 hours) I decided to dig out my retired PCI video card (the Fx5500). When I installed this card I had no 2nd pci-to-pci bridge entry appear under 'System Devices', and the one that was listed had no yellow triangle or error codes. I then checked under 'Display Adapters' and Windows 7 had recognized it as a VGA compatible device and was asking for drivers.
    I have now concluded that there is definitely no issue with the motherboard or any of my hardware (including video cards). At first EVGA Support and I had suspected that the motherboard may be bad because of all of the pre-diagnostic steps I had taken during my 10 hour ordeal. I'm not going to list everything I did because it would literally take 3 hours to type it all in. Just believe me when I say that I have tried most things including but not limited to the latest bios updates (flashed 4 times and completely reset to ensure accuracy), custom IRQ management, entire OS re-installation X2, multiple/latest chipset drivers installed, multiple/latest video drivers installed, memtest testing, complete hardware teardown and re-build (adding one device at a time), and MUCH more. The only thing I did not try was installing a different OS other than Windows 7 64-bit to see if I could replicate the issue. This is a waste of time though because lets say that I install Windows XP Pro and the 9400GT doesn't have this issue... Well, that's great, but who gives a damn about XP Pro when I have been using it for the last 9 years and when I have a full version of Windows 7 that I want to use? I'm certainly not going to run XP Pro over Windows 7 just to use this PCI video card. Second, if I install XP Pro and it still gives me the same pci-to-pci bridge error then again, I've only wasted more time because if its not going to work in either OS then Im sure as hell not going to leave XP Pro installed when I can use Windows 7.
    Thanks,
    piyush

    Maybe stupid question now but has your posting anything to do with Toshiba and Toshiba notebooks?

  • Video Card issues in WinXP - Left 4 Dead

    Just wanted to see if anyone was having issues like I'm seeing in these two pics.
    This first pics shows what appear to be polygon regions appearing out of no where.
    http://i44.tinypic.com/2v146ep.jpg
    And this 2nd pic shows spikes that appear mostly out of characters but on some objects as well.
    http://i44.tinypic.com/vqhafk.jpg
    Usually when I start playing everything is fine but after a 20min or so they will start to appear. Changing some video settings in the game (such as anti-aliasing or resolution) will usually make them disappear for a few minutes but they will then re-appear. My best guess is that this is due to the video card overheating as it doesn't happen right away, but that's just a guess. I tried installing 'speedfan' to increase the fan speed but it does not seem able to control the speed on the video card.
    Also, I only have the drivers that have come with the bootcamp installation. On the forums it seems that it is recommended not to install other versions of the drivers so I have not at this point.
    I'm running bootcamp (windows xp 32bit) on my MacPro 10.5.5 / 4GB ram (quad core Xenon) with the ATI-X1900. I have the latest 2.1 bootcamp installed. The game runs perfectly beyond these issues, although I do get the occasional stutter or audio repeat.
    I don't have any of these issues on TF2.
    Does anyone have any suggestions on a possible solution? or does anyone know of a way to control the fan speeds in Windows? In OSX I use smcFanControl to keep the machine a little cooler.
    PS. I also heard that some of the ATI-X1900 cards had issues. Can anyone confirm this? If this is the case, can anyone recommend another card for my MacPro? I do occasionally get video card issues in OSX too while doing 3d work.
    Thanks for any help!
    Message was edited by: JeffrySG
    Message was edited by: JeffrySG

    Upon inspection of the card it is totally loaded with dust. I found this article:
    http://macsaregreat.com/?p=63
    which has some pics and this thread:
    http://discussions.apple.com/thread.jspa?threadID=1265166&start=0&tstart=0
    which discusses many issues as well with the X1900 and Leopard. I first started seeing issues with the card during my 3d work after I installed Leopard.
    I'm off to the computer store to pick up some compressed air to try to clean that vent now. I already use smcFanControl already, before using it I was getting card errors every day.
    Thanks again for the info regarding the dust on that card.
    Jeff

  • PCI video card replacement for PowerMac G3 (Blue and White)

    Hi, I am new to this forum. I apologize if this issue has been addressed before, but I have been reading over the forum for the last 2 days and tried all the steps I could find. I have an old PowerMac G3 (Blue and White).
    It used to run fine. I had a friend with a similar computer and he
    needed a video card, so I gave him the one in my Mac G3, because I was not using it at the time.
    Now, I have decided I want to use it. I am running into an issue with the video (It takes PCI), I get no display, but I can hear the hard drive spin, it lights up, I hear the Apple "ding".
    I have about 6 PCI video cards laying around, and I have tried all of them, resetting the CUDA each time. Still cannot get a display.
    I have tried different slots on the motherboard, checked the PRAM battery, (it was good). Tried booting off a live Linux CD for power PCs, tried the commandoption+pr until I hear the apple "ding" go off 2x, I have tried a different monitor and monitor cable.
    Nothing seems to work, I need to know what I should try next.
    Thank you for your help in this matter.

    "I have about 6 PCI video cards laying around, and I have tried all of them, resetting the CUDA each time. Still cannot get a display."
    If these graphics cards are designed for use in PCs, they won't work in your Mac. Compatible graphics cards must be programmed with a Mac ROM. Some "PC" cards can have their EEPROM chip flashed with a Mac ROM, provided that someone has extracted the particular Mac ROM code for the card in question. A web search will provide leads for that. If you just want a decent graphics card, go for a Radeon 7000 Mac Edition (2002 vintage card). If you check eBay, you should be able to find a flashed "PC" Radeon 7000 card. I'd try to get the one with 64 MBs of DDR memory, as opposed to the 32 MB model. If you don't mind spending more $$, you can find a more current PCI graphics card for your G3, like the Radeon 9200 at Other World Computing.

  • Rage 128 PCI video card no deep sleep

    Does anybody know of a PCI video card that I can use in my Quicksilver for a third monitor that will allow deep sleep. The Rage 128 does not.

    Hi: That video card is not compatible with Windows Vista or W7.

  • Two video cards issue

    Any fix for the "Hardware cannot render at the requested size and depth" when having two video cards issue?

    Now, the strange thing is: after a few initial issues one of the macs is doing fine. The second one, on the contrary, is a nightmare. Finalcut gives a green screen of death and hangs up suddenly while performing simple operations (like dropping a clip on the timeline).
    I'm thinking of trying to replace the two video cards with an older single dual display card, and giving up the fancy lcd monitors (that i bought at vast cost), at least until apple issues an upgrade that adresses the two video card problem. <
    If the machines are mechanically equal, it's obviously not the cards. Although you can only be absolutely certain if you swap the cards between machines and see if the green screen issue follows one or both cards.
    However, that new LCD display and card combination doesn't have much time in the pipeline so there could be other issues and you're doing the beta testing for all of us. Blaming the reseller is pointless; no one can keep track of all of these issues. We only find out about them only because of reported failures.
    You should research the "green screen" here on the forum. I do not recall if there are display or graphics cards issues associated with it. That seems unlikely. IIRC, it appears to be a QT issue.
    bogiesan

  • M58p 7479 PCI Video Card

    I have been searching on this subject for a while now and a lot has been discussed about PCI-E video cards for M58p models but I haven't really found many topics on PCI video cards for M58p models.
    I'm looking for a way to stream videos from my M58p to my TV. One way to do it is to use a DisplayPort > HDMI convertor for the video and using an external sound card (for digital sound) to stream the audio. However, what I am afraid for is that the two won't be synchronized so therefore I looked for other options such as adding a video card. However, I never thought it would be so difficult to find a video card that is compatible to this model.
    My question is whether someone can help me with advising on what to do? Any idea which video cards would be good and suitable for my situation?

    Have you read this thread: http://forums.lenovo.com/t5/A-M-and-Edge-Series-Th​inkCentre/ThinkCentre-M58p-Graphics-Card-Whitelist​...

  • Info wanted: ICE Avid Blue PCI Video Card ?

    Picked up a used quicksilver, with a ICE Avid Blue PCI Video Card PN: 790-0202-00
    Wanting to know more info about this card, what software is used with it etc . .
    Appreciate any help

    Hi Patrick, my pure guess is some of the older Avid Video products...
    http://www.avid.com/US/products

  • G4 Video Card Issue

    I have just installed an ATI Radeon 9800 Pro card with one DVI port and one VGA port with the following plan in mind.
    I don't have a ton of budget to spend on my system and have opted to continue to use my two 15" Apple Studio Displays but needed to upgrade my video card to make use of Motion and some other applications. I would use one DVI to ADC connection as I had been using for my second monitor and add a second DVI to ADC connector and a VGA to DVI adaptor I bought from Sewell Direct. I was unable to send any signal through the VGA connector but do not have a VGA monitor here to check if it is the VGA to DVI converter or possibly a bad VGA port on the card.
    Has anybody done anything like this or have any insight into my problem here. I have a feeling that perhaps using the VGA to DVI is just sending it through too many conversions.
    Any thoughts? And thanks in advance!

    This is the device I am using.
    http://sewelldirect.com/dviaftovgam.asp
    "This adapter will convert your classic VGA port to a
    DVI port allowing you to connect a DVI monitor to a
    computer's VGA port."
    This adapter only sends the analog signal to the analog pins of a DVI connector. It will not work with a LCD that needs digital signals.
    "This adapter is NOT compatible with digital (DVI-D) signals, but only for DVI-I monitors and DVI-I graphics cards that emit and accept DVI-A signals."
    This will work with a CRT with a DVI connector, although I don't know why anyone would make such a CRT. To run two digital displays you need:
    1) A different video card with two digital connectors.
    2) An additional PCI video card with a digital connector. (Will not be as fast because it will not use the AGP)
    or
    3) a more expensive VGA to DVI adapter such as the Genfen VGA to DVI Adapter. <http://sewelldirect.com/gefenvgatodviadapterwoscaling.asp>
    This will not slow down the graphics, but the picture may not be as sharp as with a DVI video card port.

  • KT3 Ultra: AGP vs. PCI Video Cards

    I am running an ATI Radeon 7000 AGP 64Mb video card on a KT3 ultra.  I want to upgrade to a 128Mb video card.  The KT3's AGP slot only goes up 4X.  Most cards I have looked at are 8X only.  Is it possible to run a 128Mb PCI video card.  The MSI tech web page is lacking...please help.   

    any new agp card will work in it
    a x 8 card will just run at x4
    but as thats just a few percent slower who cares

  • Video Card Issue? Seems atypical.

    2012 Macbook Pro 15" Mountain Lion   Bootcamp Win 7 Pro.  While idle in Windows, screen went to gray and fans went high gear.  Goes to gray on reboot after Windows startup logo.  Goes to gray after initial spinning wheel on Mac side.  In Mac Safemode, after the loading of the progress bar, the screen cycles through about 3 seconds of fast moving lines and distortion then goes to a gray screen with hard to see verticle pinkish lines.  BUT the computer still boots into Windows safemode with Networking and works fine, so this does not seem to be the dreaded 2012 video card issue.  Am stumped!

    Welcome to the forum!
    What machine and OS are we discussing here to begin with?
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • P35 Neo2 PCI video card

    Hi All,
    I want use an extra video card and bought a PCI GS8400 512Mb.
    After installing the card in the system the card is not recognized by the OS (Windows 7 U64). 
    There is a yellow exclamation mark in the device manager at the PCI to Standard PCI Bridge.
    When I open the device is says 'Device could not start error 10'.
    Does my board support video cards in a PCI slot?
    P.S.: I tried the card in two other systems an it works fine.
    Spec's:
    Q6600 2.4 GHz at 3.2GHz.
    8GB Ram.
    GTX275 PCI-E video card.
    GS8400 PCI    video card.
    2 x 30GB SSD RAID 0 disk for system
    300GB disk for data
    Windows 7 Ultimate 64.
    Any ideas?
    Regards,
    PJGS.

    Ok this what is tried last night:
    - Fresh install Windows 7 Ultimate x64.  Still an error on the PCI Standard PCI-to PCI Bridge. GS8400 card not recognized.
    - Fresh instal Windows XP 64.              Everything OK. GS 8400 card recognized and working.
    - Upgrade XP 64 to Windows 7 Pro X64. An error on the PCI Standard PCI-to PCI Bridge. GS8400 card not recognized.
    - I checked my other Intel based system and everything workes fine.
       This system has an Intel ICH7 chipset instead of a Intel ICH9.
    This must be a driver problem or a Windows 7 problem, and as so often the user is stuck in the middle. 

  • X58 PRO won't boot (memory or video card issue???)

    Hi all,
    this is my first message here.
    I have recently bought a X58 PRO motherboard to which I have connected the following devices: one HD, one DVD, the CPU (i7 950), one Video Card (GeForce 6600 pci-express) and three DDR3 modules from Corsair (named CMT6GX3M3A2000C8). According to Corsair website the modules CMT6GX3M3A2000C8 run on thie X58 PRO.
    I have turned on the system, but the screen remains black and the motherboard issues an intermittent buzz sound.
    Besides:
    The led close to the pci-express (where the video card is connected) is on.
    The 5 CPU leds are all turned on.
    The led close to the memory socket is off.
    As far as I know, usually the intermittent buzz means that the motherboard doesn't recognize either the RAM or the video card, but I don't know if the buzz is different case by case (can be buzz be different according to the issue?) and in the manual I didn't find a troubleshotting chapter.
    Is there a way which allow me to better identify where the issue would be (in memory or in Video Card... or something else)?
    I have not tested neither the memory nor the video card on another system, thus I don't know if one of them is faulty.
    Can anyone please help me?
    many thanks in advance!
    Lorenzo

    Quote from: Bernhard on 27-April-11, 16:06:04
    Do a CMOS clear>>Clear CMOS Guide<<
    Only insert one mem module. Check all your power connections to the board/s again that they are secure. You may want to reseat your CPU and check carefully that all the contact pads on the CPU do have imprints.
    Ok, I'll try it this evening!
    In the meanwhile, I thank you.

  • My 27" imac won't boot in normal mode. The screen stays white. I have upgraded to Yosemite. However, the computer does boot in safe mode. Could this be a virus related issue or possibly a video card issue?

    My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Best PCI-X / PCI video card for Solaris 10?

    I don't mean "best" in the "latest, greatest, fastest" sense, I mean best to denote visual properties and rendering, support, basically. My current machine (Compaq SR5250NX) has a PCI bus ATI Radeon 9250 (256MB RAM) that XSun detects and uses as an ATI 9200 Pro AGP. There are all sorts of performance/visual issues...when I minimize a window, it takes a second or two (literally) to minimize and you can watch it "draw down." Or sometimes when I minimize a window, it minimizes from the top down, and the desktop is redrawn vertically, very slowly. (So you can watch the window disappear top down.) This is *extremely frustrating and makes the entire desktop experience unpleasant.  This is unfortunate because I really like JDS. 
    So, which card has the best Solaris 10 (XSun) support? It can be either PCI or PCI-X. All I do is write text documents, program, and other general tasks. No graphics work or anything of that sort. I don't care if it's old and I have to get it used...it just has to have awesome support and enough power to handle JDS and normal apps (Sun Studio, SO 8, FF3, etc). I'm on a bit of a budget, so if it's possible to get this card for around $100..that'd be great.
    *Yes, I've read the HCL, and I know which cards are on there as supported, but it doesn't say anything about which card has the best support. 
    Thanks,
    ~Slow
    Edited by: SlowToady on Nov 18, 2008 6:43 PM
    reason: typo
    Edited by: SlowToady on Nov 18, 2008 6:44 PM

    Although I prefer ATI for personal use on other OSes, my last two Solaris workstations have had Nvidia Quadro video cards in them, and they've both worked very well. My previous workstation (A Sun w2100z that died a couple months ago) had a Quadro NVS 280, my new workstation has a Quadro Fx 1700, which performs extremely well even at 1920 x 1280. The Fx 1700 isn't what you would
    call cheap, though.
    You might want to try pick up a used Quadro NVS (at least something in the 2xx series), or one of the lower models in the Quadro Fx series.
    Tim
    PS: I'm going to be asking nearly an indentical question to this one in a minute, except about audio cards rather than video. :-|

Maybe you are looking for