Another pdf export problem with graphics missing

well, it seems that there have been quite a few export probs w/pdf.
i created some somewhat complex graphic files (wine labels) using keynote. then transfered them over to pages so that i would be able to print them
more easily. when transfering them to pdf files i lose some graphics.
the graphics that i lose are chinese characters...but only SOME of them.
i've tried pdf/x, still the same problem, but then i have that funny shaded
box around my letters.
i've tried exporting directly from keynote, but the pdf image is markedly
smaller than the oringinal document (with the comments hidden).
any ideas...even the genius bar is stumped.
macbook Mac OS X (10.4.8)

In general, if some Chinese characters behave in one way and some other ones in another, it is often because one uses the wrong kind of font. If you for example have the (simplified) character 话 and use a font for traditional Chinese it may sometimes fail - especially in MS Word.
That said, I cannot reproduce your particular problem here. Both Keynote and Pages seem to handle this as well as they possibly can for me.
Two things you can try:
1. Change font, to make sure that it matches the character.
2. Create another account on your Mac and see if you still have the same problem.
What did the characters look like? Any fancy formatting with shadows or colours?

Similar Messages

PDF export - problems with displaying tables

Hi,
I have nice and neat rtf template with some text and big table. It looks fine, but when I export it to PDF it starts the table from new page, not just below the text, which results in 75% blank page. How can I fix it?

We are using the PDF Export 8.3.7 version, and are having a similar problem. We have a Word file (.doc) with an embedded graphic. Inside the graphic is a table (the original graphic was created some where else and had text and a table, then an image was made of that which was then embedded as a graphic in the Word document). The problem is that the table does not render corretly - the last row of data is not displayed. Oddly, if in the resulting PDF/A output you highlight the region where the data should be displayed, and copy that to Word/Notepad, the data is there, the issue seems to be in rendering the data to make it visible in the rendered PDF/A output. We see other problems with tables in other files, for example some tables are rotated ninety degrees.
Will there be a fix to PDFExport anytime soon?
Thanks,
Kevin

PDF export - problem with embedded font

Dear all,
I refer to a problem which was already discussed [here|Export to PDF wrong font;. I was asked to start a new thread and provide further information. Here we are...
The issue is nearly the same:
- We have a solution which both has a WinForms and an .aspx UI.
- We have a report, used in both solutions.
- The WinForms solution uses the Crystal Viewer to preview and print and export and so on.
- The web solution creates a PDF file and prompts to open or save. In this PDF, the font is substituted with Arial. This is actually the concrete problem.
1) Version of CR
on MY machine (MAYBE different on production environment, I have to check this):
Crystal Reports 10 (10.0.0.53327)
Crystal Reports Basic Runtime forVisual Studio 2008 (10.5.0.0)
Crystal Reports runtime engine for .NET Framework 4 (64-bit) (13.0.0.99)
Crystal Reports , version for Visual Studio 2010 (13.0.0.99)
2) CR Service Packs installed
Nope.
3) web / win app?
Both, see description above.
4) Is this happening on dev or deployed system?
On deployed system. It ONLY affects the web solution on the server, which is a Win7 64bit. My developement machine also is a Win7 64bit, it works on this device. On a colleagues machine (WinXP) it works, too.
5) What is the actual font?
The Font was exclusively developed for the customer by a designer, but it is fully embeddable (I already checked this).
6) Link to a screen shot that shows the issue
I do not know whether this really helps to NOT see a font replaced by Arial...
I hope you can help me. If the description is a little confusing, please ask, I will try to explain better, promised. Thank you, have a nice weekend!
Greetings,
Jens

Hi Don,
thank you very much for your reply!
The font is True Type, embedding allows preview/print.
What exactly does "Then make sure the WEB Servers have access to the font." mean? It is installed on the machine. I'm not really familiar with that server config stuff, as it is usually not my job...
Do we have to install the update (it is called support pack 2, right?) on the developement AND the deployment machine? Or only on the developement environment?
Best regards,
Jens

PDF Export Problems

bei using interactive functions in inDesign CS5 and then exporting to pdf, I am able to see exactly everithing I wanted in AcrobatPro, but not in Adobe Reader. What can I do, so that anybody who uses Reader can see it too? Anybody knows?? Thanks

Re: PDF Export Problems
created by Jeffrey_Smith <http://forums.adobe.com/people/Jeffrey_Smith> in
InDesign - View the full discussion
<http://forums.adobe.com/message/4271659#4271659>
What is it that you can not see in Reader: button behavior, rollover effect,
hyperlink, etc. ?
Wow, I am impressed about the fast reaction:-)
The interactive function I am using (unfortunately in German inDesign) is
"button" > Action: by letting go (?). It's a file with some 100 pages and
some 500 links. Exported as pdf interactive...
The effect In AcrobatPro: when clicking on the thumbnail the original
picture shows in a separate window without closing the original file. After
closing the new window, I could continue in the multipage file...
This is not happening in Adobe Reader. It says: the link was not found, and
here and then, when shown in e new window, the multipage file is closed...
Hope this helps..
Thanks Jaro
PS
I did reply on the forum directly, but no success. There trying via mail.
Hope it works:-)

Indesign CS5 crash during startup - problem with Graphics.rpln

I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
"Adobe Indesign CS5 has stopped working"
We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
-=-=-=-=-=-=-=-=-=-=-===-=-
Fault bucket 1848500921, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: InDesign.exe
P2: 7.0.0.355
P3: 4bad00be
P4: GRAPHICS.RPLN
P5: 7.0.0.355
P6: 4bad03d3
P7: c0000005
P8: 0004e1e2
P9:
P10:
Attached files:
C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
Analysis symbol:
Rechecking for solution: 0
Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
Report Status: 0
-=-=-=-=-=-=-=-=-=-=-===-=-
I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?

Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.

[svn] 3216: Fix for MXMLG-228, a visibility problem with graphic elements.

Revision: 3216
Author: [email protected]
Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
Log Message:
Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
Bugs: MXMLG-228
Reviewer: Deepa
QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-228
http://bugs.adobe.com/jira/browse/MXMLG-228
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

Hello Antonio;
After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

Problems with graphics on MacBook Pro / Проблемы с графикой на MacBook Pro

After updating to 10.7.3 are having problems with graphics (screenshot attached).
Installing the Combo update did not solve the problem!
Updating to 10.7.4 did not solve the problem.
What should be done that would solve the problem?
/Russian
После обновления на 10.7.3 возникли проблемы с графикой (скриншот прилагается).
Установка Combo обновления проблему не решила.
Обновление до 10.7.4 проблему не решило.
Что необходимо сделать что бы решить проблему?

Overheating happens when I use heavy graphics applications. At the moment, MBP cold, but the problem occurred. But if the application is rolled up and open again, the artifacts disappear. The problem occurs 3 ... 5 times a day, which is very annoying. In 10.7.2 before updating to 10.7.3 had no problems.
MBP 13" (mid 2010)
/russian
Перегрев бывает, когда я использую тяжелые графические приложения. В данный момент MBP холодный, но проблема произошла. Но если приложение свернуть и открыть снова, артефакты исчезают. Проблема возникает 3...5 раз в день, что сильно раздражает. В 10.7.2 до обновления до 10.7.3 проблем не было.

Problems with graphics [link removed]

Hi everyone.
I have problems with graphics [link removed] - Ogłoszenia Hrubieszów. Darmowe ogłoszenia Hrubieszów i okolice. If you want to help, please [link removed] help me in diagnosis. THX !

Explain what exactly the problem is rather than spamming the forum with links. The page looks just fine in Firefox and Chrome.
Mylenium

PDF Export problems when viewing with Preview 4.2

Hi Everyone,
I'm an Indesign novice for sure, so this may be fairly basic to a lot of you, but I'm having problems with a document of mine. I've built my portfolio in indesign using PNG images from my book. In Indesign I've applied the gradient feather to each image to give it a reflection. When I export the book with no compression, it's too large, so I've tried regular JPEG compression (at maximum) and JPEG 2000 compression at lossless and I get better file sizes, however when I view the PDF in preview there's 2 problems:
1. The images look like crap no matter what with any compression applied. Very blurry, pixelated... generally looks like crap. In Acrobat, everything looks sharp and beautiful.
2. The reflections don't exist at all. There's just an upside down version of the image there with no transparency whatsoever.
I need it to look good in both programs because it's impossible for me to control who's viewing my book in what program. It's so odd because a year ago when I built my portfolio in keynote, it looked beautiful in preview, but like crap in Acrobat.
Any ideas?
Thanks!

I can understand the gradient feather not appearing properly, and I can build the reflections into the original PNG if I must, but any idea why the images look so bad? They look fuzzy, and far from sharp with ANY any compression. The only way an exported PDF looks ok in preview is if I export it with no compression at all. Yet when looked at in reader, they look sharp (even with compression).

CS4 6.0 pdf export bug with long tables and graphics

I discovered this bug in the CS4 trial, can anyone confirm that:
1. start a new document having at least two pages
2. insert one table spanning over both pages, having at least one headline
3. insert some graphic into the headline
4. right click the graphics element / anchored object / options
5. set position to user defined
6. check that the object is in the printable area of all pages
7. export this into a pdf
8. notice the graphics object is present on the first page ONLY while in the indd file it is correctly repeated on ALL pages!
I think that is a true bug, is it?

I believe that it is indeed a bug. I've seen it reported here before, if memory serves.
Dave

SAP NetWeaver Portal Crystal Reports PDF Export Problem

Hallo all,
We are working with BO Edge XI 3.1 with integration on SAP Netweaver Portal. The problem is that integrated in SAP Portal CR reports cannot be exported to PDF or printed out.
I am using an URL iview with the parameter sOutputFormat=P to run the report.
When I want to print out the report I get the warning message from Internet Explorer "The download of files from this page is for security reasons blocked. Click here..." --> Download the file. By clicking on the u201CDownload this fileu201D the report starts to run again. PDF export doesnu2019t happen.
Did somebody have the same problem?
Thanks a lot in advance!

Hello Ingo,
thanks a lot for Your help. I have already talked to my IT department and they are looking for the solution of this problem, too.
Is there a documentation about necessary settings in the browser to work with SAP NetWeaver Portal and Crystal reports?
The problem is that on some clients the PDF export is working and on another clients not. The settings of IE seem to be equal.
Regards,
Katharina

Crystal Reports PDF Export problem

Hi I'm using Crystal 8.5 for my reports in VB 6.0. We have intrepret as RTF in the report. Now when we export this report to PDF the nested bullets loose formatting. All bullets show up at the same level. Any idea how to fix this?
Thanks
Sudha

Hello Ingo,
thanks a lot for Your help. I have already talked to my IT department and they are looking for the solution of this problem, too.
Is there a documentation about necessary settings in the browser to work with SAP NetWeaver Portal and Crystal reports?
The problem is that on some clients the PDF export is working and on another clients not. The settings of IE seem to be equal.
Regards,
Katharina

PDF Export Problem on BI 7 Web App Template

Hi Friends,
We have a web template with button group. One of the button in the button group got assigned the 'EXPORT' command.
The 'Export' command properties are as below
     - Export Format = PDF (PDF)
     - Scaling Factor = FIT_HORIZONTAL
     - Show Export Dialog = ON
     - Paper Size = DINA4
     - Paper Orientation = PORTRAIT
     - Repeat Column Headers = On
     - Header Center = Date Time and Page of Pages
     - rest are all default
I have 2 problems with the above case
     i) Header Center , other header footer things not visible if 'Show Export Dialog = ON'
     - When I run the template, and clicked 'Export Button', LAter i was shown the Dialog Box. I kept everything as default. Then i am able to see the PDF with the content. But i am not able to see the 'Date Time and Page of Pages' on the PDF. THis mode allows me to see the Content in color but no Header Center.
     - If i change 'Show Export Dialog = OFF' then i am getting the PDF with 'Date Time and PAge of Pages', i.e., Header Center.
     ii) Another problem is, I have used the Script Control and i am showing some text using JAvascript funtions on the screen. This specific text are not visible on the PDF file, when we do the export.
Could anyone let me know, how to solve this.
Thanks,
Raghavendra Pothula

Hi Raghavendra Pothula,
I am having the exact same problems as you. I am on SPS11 and have raised an OSS note. Will let you know if SAP comes back with a solution.
Regards
Adrian

Export trouble with FCPX - missing clips

Puzzled by problems exporting from FCPX.   Video of a couple of clips disappear, and only shows black.   Audio is OK, tho.
It's 4:30 in length. Most clips are on main storyline, except for a few cut-aways.   Not doing anything special, except for a couple of dissolves.   Format is ProRes 422 HQ.   Tried export same as project and export to h.264. Re-started app and machine.   Looks to effect the same two clips every time. I don't have Compressor 4, yet.
There's not many options that I know to change.
I realized this is a big problem since there's no way out of FCPX, in terms of video or EDL.
Ideas?

I've had this issue weekly with a show I produce. It bugs me for hours. In my case, I have to wait until the entire timeline is rendered, and then I have to export it to ProRes 422. Any other codec requires a re-render, which provokes the problem again. The problem starts when I take a few clips from my P2 and use the stability function along with any color correction topping them off with titles. It seems as though part of the rendering process involves re-analyzing the entire clip during rendering, and if I don't allow it to completely render the clips, I get missing video with graphics on top. I have a 12-core machine with 16GB RAM, and yet it still takes about two hours to render my 30 minute show after I'm done. This doesn't include the hours it takes to analyze the P2 clips as I import them, which also hinders me during editing and causes continual crashes. I'm hoping this new update I'm about to run addresses some of those issues.

PDF Printing Problem with HP UPD Printer

Hi,
in our Company we use the HP UPD Driver PCL5 in Version 5.9.0.18326. The Printermodells are HP LaserJet Pro 400 M401, HP LaserJet Pro 400 Color M451, HP LaserJet Enterprise Flow M830z, HP LaserJet Enterprise 500 MFP M525dn, HP LaserJet Enterprise M630dn, HP LaserJet Enterprise Flow M680z and HP LaserJet Enterprise Flow M880z with newest Firmware.
If a PDF file is printed using Adobe Reader, it takes a long time until the file is printed on the printer. Partially individual pages are printed in one-minute intervals. But if I use another PDF viewer such as Foxit Reader, PDF documents can be printed at normal speed.
Other documents, such as Word or Excel files are printed normally. Only PDF documents that are printed with Acrobat Reader or Adobe Acrobat are affected. We use the Acrobat Reader version 11.0.10. With version 11.0.6, the problem also occurs.
Sometimes it also happens that the PDF document fills up the memory of the printer when it was printed with Adobe Reader. With Foxit Reader this does not happen with the same document.
Does anyone know this problem and knows what to do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Another pdf export problem with graphics missing

Similar Messages

Maybe you are looking for