Another phantom 'Party Menu HD' materializes

Seems I've become the next victim of the rogue 'Party Menu HD'. I opened my project, did some work, went to Check Project, and saw the menu show up with problems. Can't see the menu in the Project tab, but it's there in the Menus tab, and cannot be deleted. I've tried all of the recommended fixes I've seen here from the past few years, but none have worked. Before I go the Tech Support route, I was wondering if anyone else had heard of something else to try.
Steve Brame

You don't say, did you add it?
I don't think it matters, but I just want to be sure you're not focused on it "materializing" in your project, as opposed to not being able to get rid of it. (When not added by the user, it is generally added in error as a default menu. Undoing it right away seems okay. Deleting later is sometimes one of the scenarios where it becomes a phantom menu.)
If you've looked at many of the threads here, you know that there's no guaranteed workaround other than starting the project over. The easiest workaround is to ignore it and hope yours is one of the projects that works fine.

Similar Messages

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

Third-party menu extras?!?

OK, so I upgraded to Snow Leopard. Since it was a clean install, I had to reinstall al my old software. Here's a few of them that don't work anymore, thanx to Apple's new policy (whatever that may be) towards third party menu extras : Menu Meters, Toast&Mount (Toast Titanium), Move Items X. Funyy, I get the message sayong something like "Bla Bla....read the documentation" . What documentation... and how do I make them work anyway ?

Apple is not responsible for the failure or slowness of third-party developers to update their software for compatibility with new OS versions. They have access to the new OS software long before the public does, and if they can't or don't adapt their software to it, it's no one's fault but their own.
Visit the websites of your software's developers, make sure you have the latest version of each software item, and if it doesn't work in Snow Leopard, complain to the developer.

Using the "Party" Menu and Having Problems?

There has been much discussion regarding problems with the "Party" Menu from the En Library. All sorts of problems, but the common aspect was this particular Menu.
Thanks to Jeff Bellune, we have looked closely at this Menu for any errors on Adobe's part. None have been found. The only possibility that Jeff, or I could see, was that the font used, Brush Script Std. might not be installed on all machines. This would trigger an error message in Photoshop, and ask permission to substitute that font for one that is installed. No problem, other than a substituted font. However, Jeff pointed out that Encore might have issues with a missing font, and not treat this in the same way that PS would. This is a bit of speculation, but in Jeff's case his "speculation" is much better than my "knowledge."
As for the font, it ships in the "Goodies" section on the installation disc, and should be included in the Functional Content with the downloaded version of CS3/CS4. It should also be part of the full install, though I suppose that there would be circumstances where it might not install automatically. If this is your case, just go to your installation disc, and locate the font. Use a manual install through Windows, or your OS. Now, this particular Menu should function perfectly. There could also be others, where the font might not be present on one's system. Again, the solution would be the same - install that font.
The only oddity that I found was that the Sub-picture Highlight of the first Button was turned ON. Not sure if this was just a mistake of Adobe's, or was maybe something that I did accidently. Either way, if you get Button 1 with a Highlight (star Shape to the left of the text), just go into that Button's Layer Set and make sure that it's turned OFF. That is the correct state for all Sub-picutre Highlights. The DVD player, or computer, will turn the appropriate one ON, when that Button is navigated to.
I think that I can safely say that there are no "gremlins" in that Menu. Besides checking out perfectly in PS, it functioned perfectly in En. Of course, I had that font installed, as did Jeff.
If any user finds any problem with that Menu, please post the complete and exact details on what you encounter and complete details on your version of En, plus the installation method and language of both the installation and the program. Those could be very important. More details are better.
Hope we don't see mention of the "Party" Menu, except that people used it with NO issues.
Good luck,
Hunt

willlayb wrote:
i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...
Hi
I Think u are missing something in between.
Follow the Magic Link , and observe the steps.
hope for gud .
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Why can't I organize third party menu bar icons?

Is there a way I can organize third party menu bar icons? I know I can organize preinstalled Apple icons such as the battery indicator and time/date, but how do I order third party menu bar icons so that when I restart, they will stay in that order?

Great question.
And a related one: is there a utility to organize these? I have a ton and it would be cool to have a show/hide toggle or something.

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

BM,
Pop-Up menu format is not dynamic. It is created in the Cells Inspector and can't be modified contingent upon the state of other cells.
You could program a table to list the options available for the previous selection, but it wouldn't be in the form of a Pop-Up.
Jerry

Error while calling a form from another form's menu item

I created a main form and menu module for this form.
I am calling another form from main form menu item.
i moved both the forms and menu and compiled them.
But, when i run this form i am getting an error saying
FRM 92100: Your connection to the server was interrupted
This may be the result of a network error, or a failure on the server.
You will need to establish your session.
I set the seperateframe = true
networkentries = 30
But still getting the same error.
Is there any parameter that i am missing.
I will greatly appreciate if anybody can direct me to the solution.
Thank you.
Navya.

Hi guest,
the data definition is:
DATA: XVBKD LIKE VBKDVB OCCURS 0 WITH HEADER LINE.
the assignment:
XVBKD-PRSDT = likp-erdat.
Thanks,
Hagit

Third-Party Menu Bar Malfunction

My third party apps work fine, as do their menu bar items, except for one thing...
After upgrading to SL from Leopard, I had several of the misc problems listed in this forum (ie. sound muted on reboot, system menu bar items not working, etc.) and all have been resolved except one. Once I have selected a system menu bar item, I can move to any other system item and the respective menu displays as it should. When I do this with a third-patry app, however, the menu does not follow my mouse. Essentially the button works as I can click it and use the items listed under each menu, I just can't move from one menu to the next without clicking on each item.
I have spoken with Apple CS and they are looking into it but in the meantime there is nothing I can do. I have reinstalled each app, confirmed that they are fully functional, and tried deselecting and reselecting the "Show in menu bar" option for each app to no avail. Any thoughts would be greatly appreciated. I should also mention I have tried setting up a new user also to no avail.

I searched the web and found the following Terminal command, which seems to have removed it:
/usr/local/McAfee/uninstallMSC

How Do i make a pop-up menu's contents change in 1 cell according to what I have chosen in another pop up menu from another cell

In table 1 I have 4 sets of options under the heading "CATEGORY" which will make up a pop up menu in the first cell. "Slat fencing", "standard pool fencing", "Non standard pool and garden fencing" and "Louvres" if I choose one of these 4 categories from a pop-up menu I need the next column to indicate another set of pop up menu's that change according to the first cell that I chose. I.E. I have 2 cells in a table. If I choose "Standard pool fencing" from a pop up menu in the first cell I need the pop up menu in the second cell to show the options Flat top Black, Flat top other colour, Semi frameless glass, Frameless glass.
Any help would be greatly appreciated.
Regards, Brendan.
TABLE 1
CATEGORY
SUB CATEGORY
Slat fencing
Aluminium privacy screens
Knotwood timber grain
knotwood standard powder coated
Standard pool fencing
Flat top Black
Flat top other colour
Semi frameless glass
Frameless glass
Non standard pool and garden fencing
Flat top
loop top
rod top
loop and spear
rod and spear
level spear
hi/lo spear
florence
mondello
venice
sorrento
carini
verona
milan
Pisa 2
Pisa
Meditteranean
Pescara
Louvres
fixed horizontal louvre 85mm elliptical blades
operable horizontal louvres
Vertical louvres (Stefmar) using 65x16 aluminium slats
160mm vertical louvres
TABLE 2
CATEGORY
SUB CATEGORY
Slat fencing
Knotwood timber grain

Brendan,
Let me try to explain using a similar but different method:
All the lines are shown for information flow and would not normally be included.
The table in the top left is a working table where you interact with the information:
You first select a category using a slider. As you slide left and right the "value" (shown as 2 in column B) will change. As the value changes the Category changes because the information is looked up from the category table (highlighted with a blue shaded background in the first picture.
The subcategory will also change as you modify the slider in column "B" because you are changing the category, which selects which table is used for the sub-category (sub-category tables are highlighted in light green). Once you select the category you can then slide through the possible selections for the subcategory (column "D").
There are only two formulas and they are in the "Work" table:
A2=IFERROR(VLOOKUP(B2,Category :: A:C, 2, FALSE), "<Not Found>")
C2=IFERROR(VLOOKUP(D2, INDIRECT(A2),2,FALSE), "<NOT FOUND>")
For A2=IFERROR(VLOOKUP(B2,Category :: A:C, 2, FALSE), "<Not Found>").... this means in cell A2 enter the text "=IFERROR(VLOOKUP(B2,Category :: A:C, 2, FALSE), "<Not Found>")" omit the first and last double quote
This whole scheme requires the tables be named the same as the categories in the "Category" table
I hope this helps. If not please indicate what is causing you trouble.

Another N82 query - Menu Icon Animation

Yes, I have too much time on my hands today, but seeing as people have been so helpful of late…
I read in the N82 user guide (p97 in fact) that menu icon animation should be an option, and can be turned on and off. But I assumed that this was an error as the Menu > Options > Icon animation feature was absent on my relatively new handset. At first I thought it was because I was using a third party theme, but it the same under all the pre-installed N Series themes too.
Reading the forums here, I noticed references to this feature in other threads so I looked on my handset again... under Menu > Options, I have:
Open
Change menu view
Move
Move to folder
New folder
Download applications
Memory details >
Help
Exit
No mention of icon animation in the menu or any sub menu. Is this a restriction my network operator (Orange UK) have placed on the firmware, or am I just looking in the wrong place?
Solved!
Go to Solution.

Probably the only way they could make it work.
I've noticed that with some 3rd party themes if you have icon animation enabled it doesn't show custom icons in all of the menus.
I've been using this theme recently and it behaves like that.

Another absent Translucent Menu Bar option

I read a few of the last threads regarding the inability to turn on or off the translucent menu bar option afforded by the 10.5.2 update... sort of.
I still am not comprehending the graphic specifications that either allow or disallow the ability to select or deselect the option. I liked the translucency of the menu bar. On my G5 iMac, the option is not here after installing the operating system and graphic updates, nor is the short-lived translucent menu bar.

Some people are noting that the checkbox isn't present but that after downloading and installing the combo update, that it appears. Worth a try if you don't mind another reboot.

Another SPRY horizontal menu problem with IE7

I posted this before, with no responses, but I think
I've narrowed it down to a CSS response problem with IE7.0. If you
view the attached link in Firefox or Opera, the menu background
color responds correctly on the drop downs. In IE7, the
background-color is ignored, causing the menu to be translucent
and, uh, ugly. Has anyone else had an issue with the
background-color CSS attribute in the SPRY horizontal menu css not
working?
HELLLLLP! and, uh, Thanks,
Karl
Prototype
link using spry, css, ajax sprites and other magic.

>>
Regrettably, the silence from the forum has been deafening.
I'm not sure if folks are just wary of SPRY and AJAX issues right
now because they're so new or if it's the summer heat
>>
guess it´s all of that :-) But folks visiting these more
"general" Dreamweaver forums are not necessarily Spry experts
respectively might not even be interested in that -- you´ll
certainly get more response when posting Spry related questions in
the
Spry
forums @ Adobe Labs

Integrating 3rd party menu

I bought a license version of menu creating software from Allwebmenus for my application. I used the same steps to integrate in to Sun studio and when i view locally it work and if I build and run it the menu doesn't display.
I bought the menu from www.likno.com
Can anyone help me in this regard.

solved

Updating drop down menu depending on another drop down menu

Hi!
I'm making this questionnaire, and it has 10 questions (q01 to q10).
Each question has 4 sub-questions with an associated drop-down menu (q01L1 to q01L4, q02L1 to q02L4, etc.).
The values available to select from the drop-down menu are: 1, 2, 3, and 4.
For each sub-question, the user has to select a value (1, 2, 3, or 4), and that value can only be selected once for each question as a whole.
I suppose that JavaScript will be able to remove, update, or rebuild the other drop-down menus according to the answer given to each sub-question. How can it be achieved? I have no idea how to make that happen. Could you help?
Thanks.
For example :
This is what the user actually see BEFORE filling the question :
Question 1 : When disagreeing on points of view, I get influenced by
[Drop-down menu 1] : The tone/volume of voice of the person with whom I speak.
[Drop-down menu 2] : My capability or incapability to understand the point of view of the person with whom I speak.
[Drop-down menu 3] : The logic and the rationale on which the person with whom I speak bases his/her opinion.
[Drop-down menu 4] : Whether or not the person with whom I speak is sensible to what I may feel.
The following is for you to visualise the way I named the fields in the PDF questionnaire :
q01 : When disagreeing on points of view, I get influenced by
q01L1 {1,2,3,4} : The tone/volume of voice of the person with whom I speak.
q01L2 {1,2,3,4} : My capability or incapability to understand the point of view of the person with whom I speak.
q01L3 {1,2,3,4} : The logic and the rationale on which the person with whom I speak bases his/her opinion.
q01L3 {1,2,3,4} : Whether or not the person with whom I speak is sensible to what I may feel.
q01 = the name I gave to the question 1
L1 = the name I gave to the sub-question 1
q01L1 = the name I gave to the drop-drop menu of the sub-question 1 of the question 1
{1,2,3,4} = the answers the user can select from the menu.
The user can answer :
4 : The tone/volume of voice of the person with whom I speak.
2 : My capability or incapability to understand the point of view of the person with whom I speak.
1 : The logic and the rationale on which the person with whom I speak bases his/her opinion.
3 : Whether or not the person with whom I speak is sensible to what I may feel
But cannot answer :
4 : The tone/volume of voice of the person with whom I speak.
2 : My capability or incapability to understand the point of view of the person with whom I speak.
1 : The logic and the rationale on which the person with whom I speak bases his/her opinion.
4 : Whether or not the person with whom I speak is sensible to what I may feel
This is where the JavaScript comes into play. What can be done to remove, update, or rebuild the other drop-down menus according to the answer given to each sub-question?
If the user answers 4 to q01L1, the 3 other drop-down menus should look like this
4 : The tone/volume of voice of the person with whom I speak.
q01L2 {1,2,3} : My capability or incapability to understand the point of view of the person with whom I speak.
q01L3 {1,2,3} : The logic and the rationale on which the person with whom I speak bases his/her opinion.
q01L3 {1,2,3} : Whether or not the person with whom I speak is sensible to what I may feel.
And then, if the user answers 2 to q01L2, the 2 last drop-down menus should look like this
4 : The tone/volume of voice of the person with whom I speak.
2 : My capability or incapability to understand the point of view of the person with whom I speak.
q01L3 {1,3} : The logic and the rationale on which the person with whom I speak bases his/her opinion.
q01L3 {1,3} : Whether or not the person with whom I speak is sensible to what I may feel.
And so on.
Message was edited by: einsteinbqat

I'm sure that question is an FAQ in whatever language you're asking about. But you should really find the forum for that language. This is the forum for Java programming and that ain't Java.

HELP Menu Bar Problem

PLEASE HELP! I had to add more items to my menu bar and now
for some reason it jumps when the items are clicked on. Here is the
link, please help. I can't figure out why. I only added 3 more
items.
http://test.quickflash.com
Thank you!

Hi, loons.
The icons on the right side of the Apple menu bar are called menu extras. They are managed by the SystemUIServer process.
1. The problem you are experiencing may be due to another, third-party menu extra you have installed. Are you using any third-party menu extras?
Third-party menu extras are often launched as Startup Items or Login Items. If a third-party menu extra is causing the problem, my "Troubleshooting Startup and Login Items" FAQ can help you pin that down.
2. If that doesn't sort it out, when these menu extras disappear, immediately check the ends of these Console logs for clues. In particular, look for messages related to SystemUIServer or the specific menu extras you cited.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Another phantom 'Party Menu HD' materializes

Similar Messages

Maybe you are looking for