Another Possible Issue with NwSapSetup.exe ??

This is on SAPGui for Windows 7.20 when installed on Windows 7 front end.
Installation server is at Patch 8 with latest SapSetup_Patch.exe applied I am getting an error pop up at end of the install on the front end regarding NwSapSetupUserNotificationTool.exe
I have Customer Support Message opened: 0000773130 2011
Relevant log files are attached to it.
Bob H

Jude,
Were you running as a non-admin user (using LSH on the server for admin rights) ?
I'm getting it on every system I install on WinXP and Win7.
I tested running an install while logged on with local admin rights. DID NOT GET THE ERROR. So can you confirm this?
History of the installation server is: Started as 7.20 Patch 3, Patch 6 w/ Hotfix 3 was later applied, SapSetup_Patch.exe applied, Patch 8 applied and lastly latest SapSetup_Patch.exe was applied.
Check Server - Reports no errors.
The NwSapSetup.log file I provided with my Support message has a pretty clear entry when it happens.
Bob
Edited by: Bob Held on Sep 21, 2011 7:45 PM

Similar Messages

What's possible issue with original Airport?

Hi,
I recently just purchased a used Powerbook G4 867 512M and installed an original airport card. The signal strength indicator seems to flicker in and out from no strength to highest but mainly resting at the "second" bar strength. This laptop is sitting next to a G4 tower which is getting full strength. Is there a possible issue with my laptops connectivity? Should I re-seat the airport card? What could be the issue?
Thanx in advance.

Hi,
Duane. Althoughity, I didn't verify whether the card had any physical connectivity issues, I don't think that is the problem. I made the simple move in location and that seem to have change the "bar" strength. I guess where I was was not a good area for network connectivity. Thanks for possible solutions and causes.

Possible Issues with Duplicate Training Database?

Hello everyone!
First off, please forgive my ignorance! I've only been working with databases lightly over the last couple of years, and thus far only with MySQL and MS SQL.
Recently the company I work for purchased a new software package that required Oracle. We purchased a copy of Oracle 10.2 as part of the deal and the company that sold it to us, and set it up for us, has denied us dev access to the database, on our server, because it would expose their underlying data schema. I wasn't in change when the decision was made and we spent the money on a crippled copy of Oracle, but that's in the past.
Because we don't have dev access to Oracle we're unable to create a training database for this new software in house. We have to pay this company to create a test environment for us. I was told it would cost $500, until the tech said he was going to install Oracle on our training server.
At this point I stopped him and said at $500 they'll either be breaching their licensing agreement, or giving us a free copy! The other possibility is that they were going to install this and then just bill us for Oracle later on, despite quoting the job at $500.
The tech who was about to do the installation went to check with someone more senior and then returned to inform me that installing the second copy of Oracle would indeed require more licensing fees.
This verified what I already had told him, and I said we want a training database on our existing Oracle server, and then training copies of the new software can just point to that training database.
He now needs to take time with the more senior technicians while they're "analyzing the existing database server/environment". He was trying to talk me out of installing a training database on the existing server, and instead buying another copy of Oracle, which I believe to be a total cash grab. He had no solid reason why he couldn't do it, but refused to anyway and said he needs to talk to a more senior tech (the same one who said that yes, we'll need to purchase a second copy of Oracle rather than use a second database on the existing server).
So, these two databases, one live data and one a duplicate of that live data used in a training environment where changes won't be reported against, should be able to exist peacefully should they not? The same version of the same software accessing the same data from the same server, just a different database, shouldn't present any problems with my limited knowledge of Oracle! There will only ever be maybe 5 connections to the training environment at a time, and the server should be able to currently handle twice as many users connected as it's current maximum (edit: expected) load.
I know this wouldn't be a problem with MySQL, or MS SQL, and Oracle is a superior database package, so can anyone think of any legitimate reason that might back up the claim that having that duplicate database will be a problem?
Thanks in advance for any guidance here!

Thank you very much John!
We have a per user license and I don't expect our training needs to exceed even a half dozen people at a time to start (A small, significant, fraction of the initial user base). In the future we can easily recommission other resources, or purchase more. The whole project is in the earlier stages anyway, so the needs are smaller now (but the money we spend on licensing could be recurring).
I understand the requirements angle from a server perspective, but those points you brought up drill down into what I need to know a bit more.
I doubt rollback segments would be necessary, I was thinking more along the lines of scheduled replication/duplication of the production database on a weekly or monthly basis, just to keep the material at least somewhat up to date.
I also don't think temporary table space would put much load on storage either, at least in the long run.
RAM isn't much an issue with a 64 bit version running either, for our needs now at least.
My instinct, and what you mention about even potential impact of altering the existing database schema enforces this, is that it's basically safer to create a separate database, but less resource intensive to alter the schema of an existing Oracle database to suit training needs (in this situation, maybe, making some vague assumptions about software probably), if done correctly (although still carrying risks).
I do wish I had the time to read up on this more now, and I will as soon as I have the time.
I probably will download 10g express edition to familiarize myself a bit more now, as soon as I come up with an application for it, to at least try out whatever I read.
Thanks for the advice

Experiencing Issue with Beasvc.exe and Win2K on WLS6.0SP2

I'm running into an issue with my cluster when I run my nodes as a background service
on Win2K Advanced Server. Nodes are dropping out of the cluster left and right.
There is no trace even in verbose mode that is telling me why my nodes are failing.
All I can see is a reference in the event viewer are the messages below...
"The WebWORKS1 service terminated unexpectedly. It has done this 1 time(s).
The following corrective action will be taken in 0 milliseconds: No action. "
"Compaq Foundation Agent: The Compaq Management Agents have detected a process
exception: PID: 2344 - DESC: beasvc
[SNMP TRAP: 11004 in CPQHOST.MIB]"
Any idea as to what is going on? Please note that I am running JRE 1.3.0 (hotspot
client).
Steve

Yes we all are. If you bring up the task manager you can kill
appleMobileDevicehelper.exe
appleMobileDeviceService.exe
APSDaemon.exe
when you do not have your ipad/pod connected. this will reduce some of whaqt I think is a memory leak in 10.5
when you connect an ipad and restart itunes those services will re load and you will be stuck with th eissue. I would go into the ipad/pod and turn off auto synching this will help a little as well.
we just need a new release that will address these issues

Possible Issue with Latest Office 2001 Update

In the last few days my MB Air mid-2013 with Mavericks did an Office 2011 update to Version 14.3.9. Today I used it for the first time and Excel crashed each time I tried to use it. To get the job done I had to revert to the earlier build (version 14.3.8) from a backup and that appears to work normally.
I don't know if this is an issue with Mavericks or if the update to 14.3.9 would have crashed with ML, too. Nor do I know if Word would have crashed since I had to get the task in Excel done before an appointment.
Phil

Apparently cannot edit the above. Title should have Office 2011, not Office 2001
Phil

Possible issue with DFS and CSC error 80070035

I have a handful of users who have a strange, recurring issue with Offline Files and DFS in Win7 SP1 x64.
We have a DFS root \\domain.local\DFS. Server ukln1fs1 is a root replica, running a fully patched instance of Server 2012 R2. dfsnamespace is a DNS alias of ukln1fs1, and the SPNs for host/dfsnamespace<.domain.local>
and cifs/dfsnamespace<.domain.local> are registered with that server.
Clients have the Documents folder redirected by GPO to
\\dfsnamespace\DFS\-teamfolder-\-username-\docs and redirection works fine.
Sometimes when clients are disconnected from the network and then reconnect, or when they start up disconnected from the network and then connect, they are unable to connect to
\\dfsnamespace\dfs. They get error 80070035. Clients can connect to
\\dfsnamespace fine and to the individual shared within the DFS structure. This affects all users on the computer once it has begun occurring, and the only resolution is to restart the computer whilst connected to the domain.
Kerberos is using TCP (MaxPacketSize 0)
LanManServer & LanManWorkstation signing requirements match (EnableSecuritySignature 1, RequireSecuritySignature 0)
Have used FormatDatabase on the CSC service to rebuild the offline files cache.
Latest hotfixes for Win7 file services and offline files components are installed: KB2775511 (enterprise hotfix rollup), all latest hotfixes from KB2820927 (collection of enterprise hotfixes including offline files and folder redirection components), all
latest hotfixes from KB2473205 (file server technology services).
Adapters & bindings order has the SSL VPN adapter at the top followed by the NIC then the wifi adapter. IPv4 is a the higher priority protocol in adapters & bindings.

Please have a look at this blog (DFSN and DFSR-RO interoperability), it may help you somehow.
Regards, Ravikumar P

NTDLL.DLL issue with HRBLOCK.EXE application

I am on Windows 7 64-bit and everything works fine. I recently downloaded the 2014 H&R Block Tax program on my new computer and ran the installation. Installed fine. Go to use it and it starts up but fails with a reference to NTDLL.DLL
and H&R Block is stating it is not their problem but a Microsoft issue. Can find any fixes and this is stressing me out.
The information from the event log is listed below. Any assistance would be appreciated. Note I have processed SFC /scannow with no issues.
Log Name:      Application
Source:        Application Error
Date:          1/18/2015 12:16:16 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      B21NL12.corp.pcconstruction.com
Description:
Faulting application name: HRBlock2014.exe, version: 2014.2.0.5501, time stamp: 0x549461f3
Faulting module name: ntdll.dll, version: 6.1.7601.22436, time stamp: 0x521eaa80
Exception code: 0xc015000f
Fault offset: 0x000845f9
Faulting process id: 0xbc0
Faulting application start time: 0x01d0334276d057a5
Faulting application path: C:\Program Files (x86)\HRBlock2014\Program\HRBlock2014.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: b5a8cfe7-9f35-11e4-88cf-f8165496897a
Event Xml:
<Event xmlns=>
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-18T17:16:16.000000000Z" />
    <EventRecordID>27735</EventRecordID>
    <Channel>Application</Channel>
    <Computer>B21NL12.corp.pcconstruction.com</Computer>
    <Security />
</System>
<EventData>
    <Data>HRBlock2014.exe</Data>
    <Data>2014.2.0.5501</Data>
    <Data>549461f3</Data>
    <Data>ntdll.dll</Data>
    <Data>6.1.7601.22436</Data>
    <Data>521eaa80</Data>
    <Data>c015000f</Data>
    <Data>000845f9</Data>
    <Data>bc0</Data>
    <Data>01d0334276d057a5</Data>
    <Data>C:\Program Files (x86)\HRBlock2014\Program\HRBlock2014.exe</Data>
    <Data>C:\Windows\SysWOW64\ntdll.dll</Data>
    <Data>b5a8cfe7-9f35-11e4-88cf-f8165496897a</Data>
</EventData>
</Event>

Hi Randy ,
Ntdll.dll file is a file created by Microsoft that has a description of "NT Layer DLL" and the file contains NT kernel functions.
Considering you have performed a system health scan and there is no problem found .There is still a possibility that the installation of this program has suffered a corruption though there is no error found during installation .
Have you tried to uninstall and reinstall it to have a check ? Please ensure you have got the latest version of this program .
Meanwhile I found a similar symptom and the OP has resolved it ,it may be helpful to you .
2014 HR Block Premium Fed+State - Program crashed(Pay attention to steveu1`s answer )
http://community.hrblock.com/t5/DIY-Products/2014-HR-Block-Premium-Fed-State-Program-crashed/td-p/57634#.VL4ANHkfrwo
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards

Issues with creating EXE in LV 9 (w/ patch)

When creating an executable in LV 9 (with the new patch installed), it is taking around 7 to 8 minutes to create the executable... where as in LV 8.5 it only took around 1 minute (same VI no changes).
After the EXE is done I go into my build folder and find the following folders: NI_HTML, NI_report, NI_Standard Report (these all containing actual VIs (not executables) from the above folder llbs. This never occurred in 8.5 nor in 7...what's going on here? I've got a few customers waiting on the EXE and am just stalled due to this.

This is a joke right? "cleaner method of distribution"?
So I have to do more work to upgrade NI's lower level LLBs in LV 9 when in the 1st place I paid NI to upgrade from 8.5 to 9... doesn't seem close to an upgrade (in regards to plug & play quality) to me! The resource page that supposedly shows you how to fix this issue is vague! ??????? Geesh.
Maybe this is a better way to do things with the "Object Oriented Program" & Classes... though, for a someone only a few years deep in LV...this is not efficient at all (NI is going to start killing it's marketable value if they make this any more difficult).
"Solution:
The Report Generation Toolkit 1.1.3
released with LabVIEW 8.6 was rewritten using LabVIEW classes and
LabVIEW Object Oriented Program. Because of these changes and the
improvements in performance, there are some files that currently are
added explicity to the build directory. Therefore, the behavior is
expected and the executable will run without problems. In a pursuit of
a cleaner method of distribution when configuring the Build
Specifications for executable, all the generated folders can be placed
into one support directory."

Print issue with splwow64.exe

We have an application (Acomba 9.57 32-bit) that is sequenced by APPV 5.0 SP2.
Users cannot print inside the software. Also, when the application is started, we cannot print in Adobe Reader or in any applications from Office 2010 32-bit.
By executing the application, it creates a process called «splwow64.exe». It seems to be inside the «bubble» and makes printing not working.
We found out that opening the printer dialog from Word or Adobe Reader before launching the virtualized application, it calls «splwow64.exe» and the application (Acomba) can now print.
Is it possible to make the virtualized application uses a non-virtualized «splwow64.exe» ?

Hi,
Finally the problem comes from HP Printer Status notification Pop-Ups (SNP) in the Universal Printer Driver. Enable or disable COM isolation mode doesn't make a difference. As said previously, the splwow64.exe process opens when the Appv application is
lauch. When the Appv application (32 bits) prints to the UPD queue, the splwow64 process doesn't seems to look at the HP UPD registry keys under the current user profile. Instead, the Appv apps create new registry keys in the user profile "bubble".
There is one particular key that broke the printing:
HKEY_CURRENT_USER\Software\Hewlett-Packard\HP SSNP\SSNPHwndId
This key is recreate under user "bubble". If this key is deleted in the "bubble", the printing works. But every print jobs recreate that key, so we need to delete again. Strange, but the SSNPHwndId value is the ID of HP Printer Status notification
Pop-Ups (SNP) instance and is NEVER the good one in the "bubble". Everytime the key is recreate, the ID change.
The workaround for now is to disable HP SNP in the printer queue. We get the default print notification window, that is fine. But we are curious if we can do something or is just a bug in appv.
We did all tests with a plain Windows 7 x64 SP1 up to date, latest HP UPD driver. Just in case, we leave this computer outside the domain to be sure no GPO is applied.
Thanks

Issue with igswd.EXE startup - SAP PO

Hi All,
I am using SAP PO ( SAP 7.31 ) on MSSQL 2012 & Win Server 2008 R2
I am unable to start the igswd.EXE Process from SAP MMC.
I tried to implement the SAP note 824281, is this valid for SAP PO?
Because the changes in accordance with SAP note 824281 in usr\sap\<SID>\SYS\profile\ <SID>_J00_<host> is not working
kindly help please if any one has faced the same issues

Hi Goutham,
Please check if IGS Sar file is extracted in kernel and have binary files present in Kernel .
Is there any log files also for this issue ?
Thanks
Manas Behra

[SOLVED] Possible issue with makepkg or gnupg 2.1???

I am quite willing to admit that it's possible I'm totally stupid and missing something basic, but I just wanted to see if this makes any sense to you folks. Basically, I'm wondering if there's a regression in makepkg or gpg-agent with GnuPG 2.1.
Step 1: Verify the condition of my personal keyring.
gpg -k | grep Xyne
No results. Good.
Step 2: Verify the condition of pacman's keyring.
sudo pacman-key --list-keys | grep Xyne
No results. Good
Step 3: Use pacman-key (NOT my local GPG keyring) to import Xyne's key and trust it.
sudo pacman-key --recv-key EC3CBE7F607D11E663149E811D1F0DC78F173680
sudo pacman-key --lsign-key EC3CBE7F607D11E663149E811D1F0DC78F173680
sudo pacman-key -u
Step 4: Try to install pm2ml, signed by Xyne, and use makepkg to verify that yaourt is NOT the problem. This will not work.
yaourt -G pm2ml
cd pm2ml
makepkg -s
==> Verifying source file signatures with gpg...
pm2ml-2014.12.31.tar.xz ... FAILED (unknown public key 1D1F0DC78F173680)
Step 5: Check that I'm not crazy.
sudo gpg --homedir=/etc/pacman.d/gnupg --verify pm2ml-2014.12.31.tar.xz.sig
gpg: WARNING: unsafe permissions on homedir '/etc/pacman.d/gnupg'
gpg: assuming signed data in 'pm2ml-2014.12.31.tar.xz'
gpg: Signature made Tue 30 Dec 2014 05:55:07 PM MST using RSA key ID 8F173680
gpg: Good signature from "Xyne. (key #3) <[email protected]>" [full]
Step 6: Import Xyne's key into my local GnuPG keyring, which I should definitely not have to do:
gpg --recv-key EC3CBE7F607D11E663149E811D1F0DC78F173680
gpg --lsign-key EC3CBE7F607D11E663149E811D1F0DC78F173680
makepkg -s
Makepkg will work at this point. I have tried this three times, and I can duplicate it 100% of the time.
Is my configuration messed up, or can anybody else duplicate this? I'm wondering if the gpg-agent since GnuPG 2.1 doesn't switch home directories or something and refuses to see a new key even though I just imported it? It seems like the key and the signature are both clearly valid, but I can only get Xyne's package to verify using makepkg if I import his key into my ~/.gnupg keyring.
Again, I could be totally stupid, but I legitimately do think there might be a bigger issue.
Thanks.
Last edited by AdrianCohea (2015-01-31 21:27:30)

Okay, sorry! I didn't know that was intended behavior. That actually makes me a lot happier.
It just didn't seem intuitive to me that I would have to add the developer's public key to my own keyring rather than to pacman's keyring. Almost guides I had previously read previously said I needed to use pacman-key to import the public key.
This thread can be marked as solved, because there is no issue.

Pdf print issue with pdfp.exe

I have updated my Adobe to Adobe Reader 11 and in my application has used pdfp.exe for printing pdf files. But after updation I haven't print pdf files.It can be possible to print while Adobe reader 10 and below version .Please help

Hi,
Finally the problem comes from HP Printer Status notification Pop-Ups (SNP) in the Universal Printer Driver. Enable or disable COM isolation mode doesn't make a difference. As said previously, the splwow64.exe process opens when the Appv application is
lauch. When the Appv application (32 bits) prints to the UPD queue, the splwow64 process doesn't seems to look at the HP UPD registry keys under the current user profile. Instead, the Appv apps create new registry keys in the user profile "bubble".
There is one particular key that broke the printing:
HKEY_CURRENT_USER\Software\Hewlett-Packard\HP SSNP\SSNPHwndId
This key is recreate under user "bubble". If this key is deleted in the "bubble", the printing works. But every print jobs recreate that key, so we need to delete again. Strange, but the SSNPHwndId value is the ID of HP Printer Status notification
Pop-Ups (SNP) instance and is NEVER the good one in the "bubble". Everytime the key is recreate, the ID change.
The workaround for now is to disable HP SNP in the printer queue. We get the default print notification window, that is fine. But we are curious if we can do something or is just a bug in appv.
We did all tests with a plain Windows 7 x64 SP1 up to date, latest HP UPD driver. Just in case, we leave this computer outside the domain to be sure no GPO is applied.
Thanks

Yet another export issue with Aperture 3

Judging by a search of topics, there seem to be a myriad of problems associated with getting files out of Aperture, some of which represent occult setting issues, others which seem to be actual bugs. I've run into an issue which seems to defy categorization, and I'm not sure if it's me doing something wrong, or if it is actually yet another bug with this software. I've been an Aperture user since 1.0 and I have to say the current version I'm running (3.4.3) is by far the worst yet. Anyway, enough whining. Here are the issues:
I'm running Aperture on a 6 core Mac Pro with Lion 10.7.5. There are two thing happening.
1. Exporting JPEGs is INCREDIBLY slow - perhaps as long as 4 or 5 minutes for a 3MB file.
2. This is the one driving me batty right now. Tried exporting a batch of images as JPEGs at the 50% original size setting. The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2. They are 80-100MB in size. When I export the images to a file on my Desktop, it consistently exports 6- 10 KB thumbnails. I've checked and rechecked my export settings and can find nothing amiss there. Has anyone else had a similar experience? Could the view I'm working in have anything to do with this? I work 95% of the time in split view.
Thanks,
Russ

I agree that there re a lot of posts about exporting, but a very large number of them refer to the same thing, and it's not a bug, but rather a misunderstanding.
For instance:
Tried exporting a batch of images as JPEGs at the 50% original size setting.
Okay.
The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2
Not relevant.
They are 80-100MB in size.
Not relevant either.
Why?
Because size refers to the dimensions of the image. So a 1,000 x 1,000 pixel image exported at 50% will turn out as 500 x 500 pixels.
Were you expecting a jpeg between 40 and 50 MB? That's Jpeg quality or the amount of compression applied to the image. And as you're compressing a lossless format (tiff) to a lossy one, and one with an aggressive compression algorithm, he resulting Jpeg, even at high quality, will be much, much smaller, more likely in the 6 - 8 MB range.
That's the nature - and indeed the point - of Jpegs.
So, if you're getting 6 - 10 kb images, you're exporting at a very low Jepg Quality.
This may also explain why it's taking so long to export. Getting rid on 99.99% of the data and compressing into 10kb is always going to take time.

Jedi Academy 1.01e Multiplayer Freezes iMac - Possible issue with Leopard?

Just migrated everything over from my old iMac G4 17" to the new Intel iMac, Jedi Academy single and multiplayers seem to be freezing my iMac hard. I have downloaded the UB patch (1.01e) from Aspyr, made sure all Apple software was up to date, done a clean install after clearing out all the prefs/.plists for it and it will still lock up.
This occours trying to run Multiplayer, it gets to either 'Awaiting Snapshot' or just joins the server and the system freezes.
I've been working with Aspyr's technical support, initially they could not get the problem to happen in single player but when they tried multiplayer they experienced the same problem of it freezing the computer. They have passed it on to their Dev team as a possible Leopard problem but figured I'd mention this here as well in case other users have this issue.

Cannot say, can you use Real Player until it is solved, or flip for mac?
Ray

Issue with SAPbouiCOM.exe

Hello,
We are trying to install the client onto a desktop and we are having this message :
Unable to reg C:Program FilesSAPSAP Business OneSAPbouiCOM.exe
Any idea / reason why it shows this message ?
Thanks
Stéphane
(SBO 2005A SP1 PL11 + SQL 2000 SP4 + Windows Server 2003)

You can check SAP note 847694.
My suggestion would be: if possible, upgrade your PL now since PL11 is too old.
Thanks,
Gordon

Another Possible Issue with NwSapSetup.exe ??

Similar Messages

Maybe you are looking for