Another preview question

I'm not quite sure what happened but I've lost the ability to preview in another browser. When I first set up Dreamweaver CS3 (ages ago), I could preview in IE, Mozilla and Safari. Now I'm down to just Safari -- and that's not going to cut it. What it's doing is if I select 'preview in Firefox' I get this "You have chosen to open" said file, "what do you want Firefox to do?" and my 2 choices are open or save. If I select open, it just goes through the loop again.
What's going on here? And why is it only doing this in IE and Firefox? Why doesn't it do this in Safari?
"It worked just fine YESTERDAY!!"
Monday's!!

I found the issue. If you go to 'edit browser list' there is an option box for 'preview using temporary file'. If this box is checked, then IE and Mozilla should start working again. I'm still not sure what caused IE to fail from so long ago, but at least I'm back up to 3 browsers to view my work in.

Similar Messages

Fields in PDF form are blank: Another Preview question...

So I get that filling out a form in Preview can create a problem where the end user cannot see the info in those fields unless they click on them. But I have some additional questions:
1. Is just viewing a PDF in Preview without making any changes enough to cause this problem?
2. Is it only Windows users reporting this problem or are Mac users having it as well (when trying to view it in Acrobat or Reader)?
Here's why I ask: We created this form but send it out to clients to fill in and return. I sometimes view these returned forms in Preview because the info loads faster than it does in Acrobat. No issues there. But with one form in particular that we received today, anyone trying to subsequently open the form in Acrobat is having a problem. It seems to be just this form that is causing the problem. I'm not sure what the client used to fill it out, but they sent back other forms that don't seem to be a problem, so it seems unlikely this one would have been filled out using a different tool from the others.
Also it appears that Mac users AND Windows users are having issues seeing the fields in this form properly filled out. Heretofore, I've only read of Windows users having this problem.
Any insight would be appreciated -- thanks!

A form has to be saved in Preview in order for it to be corrupted, not merely opened. What OS is used when opening a corrupted PDF in Reader/Acrobat doesn't matter.

Overprint Preview question and another issue...

Hi...
CS4, Win XP.
Overprint Preview question:
The other day i sent a file for printing (poster) in PDF and CS2 formats. For some reason, the printer converted the file to a .tif and then printed. Parts dropped out... Both the PDF and CS2 files looked fine.Description follows:
1/ Background black
2/ Design element over the black (blue lines to form a wave).
3/ Logo in red and white. Plus a line of text in red. And other text in white.
The white of the logo vanished. The red line of text kind of vanished... printed very faintly and only (i think in parts). Printer tried to do a patch job of printing the line separately and pasting... anyway... to cut a long story short, he wanted the final output in .tif. OK...
So, i converted to tif and sure enough... those parts vanished... did a search here and found the solution - view file in Overprint Preview and then in Attributes, turn off the Overprint Fill... so all well...
So, the question is, why does this happen? And, how, do i know in advance that x or y is likely to cause a problem? I have noticed in Bridge that sometimes, parts of a logo or a line of text does not show... but looks fine in AI or Acrobat... now realise the cause, but not the reason.
The other issue...
Same black background(s)... placed Photoshop file/s with a transparent background... Prints fine at the printers (various machines and media) ... But on the laserprinter an HP Color Laser Jet CP1510 series, there's a dark patch around the image (the actual file area).
Again, any ideas?
Cheers...
S

PrepressPro1 wrote:
<snipped>... so if your looking for this forum to play detective and tell you who in your workflow set the elements to overprint, I don't think this can be done. I don't think I have ever seen Illustrator set any elements to overprint all by its self. <snipped>
Hi PrepressPro...
Many thanks for your earlier inputs, but not quite sure where you got the idea that i want someone or anyone to play detective... i've understood the Overprint problem... and moved on. If anything, maybe i was just musing and wondering if any particular action turns on "Overprint Fill"...
Or maybe, i was referring to the second question which has not been resolved yet... Quoting it below for easy reference:
++++
The other issue...
Same black background(s)... placed Photoshop file/s with a transparent background... Prints fine at the printers (various machines and media) ... But on the laserprinter an HP Color Laser Jet CP1510 series, there's a dark patch around the image (the actual file area).
++++
To elaborate, the pix above are product shots which have been cut out and placed on a transparent background... The PS file is then placed in AI CS4 with the object option selected to maintain transparency. The transparent area is printing darker on the printer above. But is fine when sent to commerciqal printers...
Attached is a scan of the problem...

Another newb question: multiple virtual servers

Hi, I have yet another ignorant question. I have several unrelated web projects that I am working on, and I would like to be able to set up a virtual server for each one for testing purposes, such as: http://project1, http://project2, http://project3. Can someone tell me if this is doable, and if there are any tutorials/resources on this for someone who has 0 experience running a web serer? Sorry for being so ignorant!

Yes, it is doable.
You can setup virtual server either by IP or by name.
If you have one IP, and want to set them up by name (ex. http://project1, http://project2, http://project3) you can do so easily with this type of configuration:
<virtual-server>
    <name>mydomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.mydomain.com</host>
    <document-root>/www/domain</document-root>
</virtual-server>
<virtual-server>
    <name>myotherdomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.myotherdomain.com</host>
    <document-root>/www/myotherdomain</document-root>
</virtual-server>
....The important part here is that
a) all virtual servers share the same HTTP listener
b) which virtual server serves the request depends on the $HOST request header send by the client. Sun Web Server does the matching for you. It will match $HOST vs. the virtual server's host attribute. Depending on which site you connect to the right virtual server will be used.
c) if the $HOST request header does not match any of the virtual servers, then the default virtual server defined in the HTTP listener will be used.
To create a virtual server, use the Admin GUI, access the configuration, and then add new virtual server. Or use the following CLI command.
wadm> create-virtual-server --config=myconfig --http-listener-name=http-listener-1 --document-root=/www/docs/myserver.com --host-pattern=myserver.com --log-file=../logs/myserver.com-error_logs myserverHost pattern will be used for matching. Some of this elements might be optional.
Hope that helps. And keep the questions coming :D
Edit: Also check the documentation
Using Virtual Servers in SJS Web Server 7.0

Overprint Preview question

I am trying to print a film positive for a spot UV job that is supposed to have some text reversed out of it. Output Preview does not show the text. My RIP does not see it either. I can only see the knocked-out text when I turn off overprint preview in Acrobat preferences. I guess my question is what did the artist do wrong when he made the PDF? Also, is there a preflight profile I should use on all the files I receive, to prevent this confusion from happening again?
I am using Acrobat 9.5.1 on Windows 7
RIP is Roland VersaWorks

Do you know what software the artwork was created in?
If I didn't see reversed text, I would first check that the reverse field object was not set to overprint -- which would eliminate reversed-out type. Some other issues can interfere with reversed type -- using an unavailable font for example, or the text not being set to white, and several more exotic settings and techniques. Some DP software has trouble knocking out type if it's not the frontmost object on the page.
BTW, the title says "Overprint Preview question" but I think you're just asking about "output" preview, though it did make me think of the overprint setting issue.
As to preflight profile, you have to make sure everything is set right for your particular output device/print conditions. You might want to run a profile that checks for missing fonts, low-resolution images, non-CMYK inks -- anything that would give problems in film/plate output or on the press.
Also, when I have text problems, I try printing to other devices -- laser printer, inkjet, whatever -- to see if the problem is device-specific.
Hope that helps a little

Another simple questions

Hello friends:
Another simple question: I need to learn things about Oracle on my desktop.
My machine runs Windows 98. Oracle has some desktop product of its Database Line?
For example: Oracle Personal?
And Oracle Lite? What's the main difference between Oracle Personal and
Oracle Lite?
Thank You
Gracias
Ing. Pablo Romero
CORDOBA ARGENTINA

1. I didn't know the answer to your first question, but I googled it and it says the item is the in-call audio boost.
http://forums.crackberry.com/f71/flag-icon-47659/
2. isn't this setting determined by the carrier? So it's not a setting in the phone, but when you call in to your voicemail you can change your options?

Another RAM preview question. CS6

Hello everyone! I am currently working in After Effects on a video that uses an evaporation effect. When I use the RAM preview function only about 200-250 frames load out of 1200. At this point After Effects stops loading a RAM preview and just plays the few seconds of video it has loaded. I am trying to watch the entire 12 seconds of the evaporation effect.
I then tried to use footage that has no effects added to it, and the same thing is happening. I recently cleaned my disk cache, and this problem started happening. I feel like that is a coincedence though.
This problem was not happening a few weeks ago and after searching the forums I have not been able to find a solution that worked. Thank you for any helpful responses you can give.
Computer Specs: Macbook Pro. OSX 10.75. 2.2 GHz processor, 4gb Memory, 158 gb free storage
Video specs: 60 FPS, 1280 x 720 , H.264

This question is answered in the Forum's FAQ section:
Why does RAM preview only play part of my composition?

Re: another build question! (sorry lol)

Hi all
right, after days and days of researching all the excellent articles on here ive had to write a post! So apologies for going over old ground
Im going to build a new CS5.5 rig (having had a guts full of Apple and their FCPX fiasco its back to pc!)
so although i appreciate the 990x o'c is prob best option, bang for buck is leading me down the sandybridge i7 2600k o'c option on p67 mobo with 16gb of ram (option to take to 32 down the line when the chips are out)
anyway, im sorted on chip mobo (msi big bang marshal p67), nivida 570 etc , its the drives im struggling on!! Im edit avchd video and some after effects, small amount of 3d, and in FCP i always transcoded everything to prores. Now on cs5.5 it looks like real time performance is possible with high end hardwear.
So mobo, ram, and chip aside, my HDD config im unsure on, ive not really got the cash to go crazy with raid controllors etc, but understand need for seperate drives, etc and tbh might even go downt he cineform route as a prores alternative (prob avoiding hassles of drive speed with avchd)
im thinking as the SSD's are now dropping in price and the ocz are producing these 500 mb r/w speed sata 6 120gb drives for a reasonable price, would 3 of these drives (one for os, one for media , one for scracth disk ) be a good set up or is it a waste of cash and should i raid 0 from bios/mobo?
I appreicate that 120 gb drives for media etc are small, but i would take project media from another much large backup drive and just use the 3x ssd set up as working disks for editing & os? once project over, clear out drives to larger back up and start new project!
Its either that or i go SSD as bootdrive, but some sort of cheap raid set up for my scratch disk, media drives? prob is if i do that, from what ive read (brain dead now) i would be best off with 2 x raid 0 as scratch disk and orginal media respectively when workign with avchd
HOWEVER, on my mobo there are only 4 sata 6 ports, so if i use one for ssd boot drive, and then im left with 3 x sata 6 ports and another 4 x sata 3 ports to raid on? how does this work? any point in getting the sata 6 drives as one would be stripped with a sata 6 drive plugged into a sata 3 port (this was my reasoning behind using 3 small sata 6 ssd's plugged to the sata 6 ports and rest of sata 3 ports as storage and backups!
confused lol!! I just want the overclocked sandybridge system with decent gpu card, as much ram as possible at present, but im thinking my bottleneck will be in the HDD config! any suggestions are much appreicated! im not that techy so whilst have read all the articles am more confused now (plus normally a mac user, so its out of the box configuration usually!) for what its worth looking to purchase something from scan uk in terms of parts! total build cost including a reasonable screen £2,000
many thanks

You have a limited budget, especially in the UK, but then don't we all?
Going for the 980X will triple the cost of the CPU, but even when editing AVCHD material the gains are not sizable enough IMO to justify that cost differential. Add to that you will need 24 GB instead of 16 GB and that carries an additional price tag. Both factors will easily move you out of budget range if you want to have a number of disks and possibly a raid controller.
Did you read my article To Raid or not to Raid, that is the question. It can be found under the Overview tab at the top of the page? (Currently responding from abroad on my notebook and not having the bookmarks available for easy linking). http://forums.adobe.com/thread/525263
With media and projects I would advise against a raid0, because of the lack of redundancy. For pagefile, media cache and previews (scratch disks) raid0 is quite OK. They will be recreated if needed. The performance gain from a raid0 for media and projects over a parity raid is easily offset by the time spent on making backups. For parity raids do not use WD Caviar Blacks, but look at the Hitachi 7K3000 line of disks.
The question of Sandy Bridge versus the old X58 platform is essentially one of 'which limitations are acceptable to me'.
The Sandy Bridge is a great processor and at least the equal to the old i7-9xx quad cores. However, the platform, the chipset, has its shortcomings in terms of PCIe lanes. Whether that is relevant to you, only you can decide. But hey, we would be in serious trouble if Intel did not manage some progress in two years time from the i7-920 to the i7-2600K. So of course the i7-2600K shows much more potential than the almost retired 920, it is the chipset for the Sandy Bridge that is 'flawed' in comparison to the X58, but that is no surprise, since the Sandy Bridge is a 'middle-of-the-road' platform and the X58 was a 'high performance' platform.
BFTB-wise I think that within your budget limits, you should look at the i7-2600K, but with the best disk setup you can afford.

VC6 CEditView and Print Preview Questions

I've got 2 questions that I would greatly appreciate some help on, as it
relates to a MDI app that I wrote using VC6.
1. I've got an edit view in the app which displays a report, and I've added
the option of letting the user select which font to display the report in.
Unfortunately, the print preview does not reflect any of the font changes,
not even if I hard code a font change in initially, the font
remains the same in Print Preview. I'm using SetFont to set the font. I'm
calling CEditView:nPrintPreview to generate the print preview. Any ideas
how to fix this?
2. I'm trying to add a header and a footer to each page of the report. Is
there any way to retrieve the information from the edit view in terms of the
pages, or
is there another way to accomplish the headers and footers easily?
Once again, thanks for any help you can give me.
Nick

Hello Nick,
Are there specific questions you have regarding use of NI Measurement Studio components? They're usually prefixed with CNi*...
If your questions are specifically related to the CEditView, you will probably have better luck on the Microsoft discussion forums.
David Mc.
NI Applications Engineer

Previews questions from link - "preview folder so big, even after purging the 1:1"

Can someone clear this up a bit?
My LR 2.1 preview folder is at 12gb, and I want to get that under control. After reading all of the threads here about previews it seems one of the best choices is just delete the folder and then let LR 2.1 rebuild it. But before I do that I want to set my preview options correctly. The info below (found in another thread) is good, but confusing at the same time.
1) "You have 4 choices: 1024, 1440, 1680 and 2048. If all you want is standard-sized then choose a size equal to or slightly less than your screen size" Is this based on the long edge of your screen size? long edge meaning 1280.
2) "Now take the example of a larger camera, say a 8MP camera such as the Canon 1DMKII with an image size of 3504 by 2336 pixels. With the standard-sized set at 1680 pixels the full-size will again be purged (i.e. 3504/2=1752 pixels, which is greater than 1680 pixels)". This formula looks to be saying the long edge, correct?
Am I understanding this correctly? This looks to be saying;
A) standard previews uses your screen size.
B) 1:1 previews uses images pixel sizes?
C) you only have one setting to control previews for standard and 1:1? (that being the "You have 4 choices: 1024, 1440, 1680 and 2048")
This is interesting because in my case my screen size in 1280, but most all my Nikon D3 images are 42xx. So if I want to keep my previews folder clean and growth controlled, I should basically set my previews option to the lowest 1024? And one more interesting tid bit, how does a cropped image play into the 4 choices? Say I crop a 42xx image to oh say 2024, then my 1:1 for that image will never be purged? I'm probably missing something here, and it wouldnt be the first time.
Why is the Lightroom preview folder so big, even after purging the 1:1 previews?
Ian Lyons - 05:18am Aug 18, 2008 Pacific
1:1 or full-size previews take up a large amount of HD space, often many 10's of GB's. This is why building them on demand is an alternative to building them up front, and why you have options for auto or manually purging them. That said, it may not always be possible to delete 1:1 previews - more later.
Standard-sized previews are based on the pixel size option you chose in Catalog Settings. You have 4 choices: 1024, 1440, 1680 and 2048. If all you want is standard-sized then choose a size equal to or slightly less than your screen size. Lr also builds smaller versions at the same time. These are used for the thumbnail, 1:2, 1:3 and 1:4 zoom levels. Adobe call this the "preview pyramid".
1:1 previews will not be deleted unless your chosen standard-sized preview is less than half the size of the full-sized preview. For example, you have images with pixel dimensions of 3072 by 2048 pixels (6MP camera such as Canon 10D) and have selected 1680 pixels for standard-sized previews. Since a 1680 pixel preview is more than half the size of the original the full-sized preview will be kept, even after using the purge 1:1 preview command. Had you chosen 1440 pixel for standard-sized previews then the full-sized would have been purged (i.e. 3072/2=1536, which is greater than 1440). Now take the example of a larger camera, say a 8MP camera such as the Canon 1DMKII with an image size of 3504 by 2336 pixels. With the standard-sized set at 1680 pixels the full-size will again be purged (i.e. 3504/2=1752 pixels, which is greater than 1680 pixels).
thanks,
Donnie

The chance of an answer is inversely proportional to the length of the posting. ;)
You do not indicate what your preview setting was while you accumulated a 12Gb preview folder. Nor do you indicate how many images are in your catalog.
Given your screen size of 1280 (laptp?) I would set the preview size to 1440 since this is still far less than half of your D3 images.
Cropping - I'll safely guess - has no effect on your preview size choices.
I confess that preview sizing and purging is confusing. I avoid the confusion by shouting "more disk, mama".

Pre7- A Preview question.

Hi all,
Is there a way to preview what will be the end result on computer monitor, without burning a dvd? Would a video card allow me to add a small 13" TV output to monitor the end result? Many thanks!
Raj

Hi Steve,
I should have bought a regular computer, but instead I ended up getting a low profile Dell without realizing I can't use regular size PCI-e cards. So it has to be a low profile one. There are couple listed in Microcenter, which is nearby, so I don't have to pay shipping. They didn't have the PNY one you sugtested in low profile. Could you check these our for me?
http://www.microcenter.com/single_product_results.phtml?product_id=0315741
http://www.microcenter.com/single_product_results.phtml?product_id=0305869
Another things is that I just, may be a month ago, threw out a nice 13" TV so now I have to buy that as well. Boy I could kick myself,
or may be one of you could take that pleasure.
Thanks Steve for all your help!
Hi Nealeh and ATR,
I have only one monitor output, for the computer monitor. Not only that I have to buy a IEEE 1394, low profile off course, card as well to import the video from my Canon. The main idea is to see almost exactly what the file will play on real TV for almost a professional video. I will also try connecting the TV via video camera, without using video card.
Thank you for all your help.
Raj
P.S. You all make this world a better place to live and enjoy!

Another preview related bug???

Recently I reported an issue (bug) with preview and
non-auto-update variable. See
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=65&catid=449&threadid =1364202&enterthread=y
I have another issue with preview:
- I update text within the body of a topic (I DO NOT toch
header/footer that are set in template)
- Do a preview
- Close/save topic
- RH comes up with dialog saying:
"This topic was created from a template and the header of
footer has been modified.
What would you like to do:
- Apply this modification to all topics created from the
template
- Apply this modification to this topic only"
Again, I never touched header/footer.
Can anyone using 7.0.2 confirm this behavior?
Herman

> See if this helps. Suggests turning off auto update.
This doesn't help because a preview updates the date
variable, even when auto update is set to off. When the topic is
not edited, RH doesn't prompt to save the topic and consequently
the updated date isn't saved . With edits, save dialog comes up and
additionally header/footer dialog because date in footer has
changed.
See also my earlier post here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=65&catid=449&threadid =1364202&enterthread=y
Secondly, I really need it on auto because I'm running
everything through batch files
I think that we need an option like Colum McAndrew described
in the thread you're referring to. An option not to update a
template variable when applied to a topic, or when previewing a
topic.
Herman

Another BW question about filter in the query definition

Hi ,
I have another question about filter in the query definition.
<u>Question:</u>
Which of the following objects can be filtered in the query definition?
A. characteristic
B. Key figure
C. Structure
D. Units
E. Hierarchy
My answer is A,B,D,E.
The answer in the book is A,B,D
Can anybody tell me which one is wrong?
Thanks in advance,
Liu Jia

HI
1.The answer could be A,B,D.you can not apply filters on hierarchies
2.Whenever there is a change in Attribute data(like Location,Num etc...)that has to be reflected in all aggregates of the cube.Thsi can be done by running "ATTRIBUTE CHANGE RUN".
sri

IPad Preview question

Hi, apologies if this has been asked before but is it possible to give the user a preview of the magazine you expect them to purchase on Apples Newsstand? Right now it appears to be limited to the front cover. It would be good to allow the user 'flick' through the magazine in thumbnail style to give them an impression of whats inside (just like on Newsstand in a shop). It looks like other publishing software offer this feature.
And part B of that question is, if I have a free (for the user) sample issue amongst my paid issues, I assume I have to pay the folio download cost for each free sample downloaded?
Thanks for any feedback.

For Part A of your question, no, it's not currently possible to offer a preview of a pay folio (either via thumbnails of the content or partial reading of some part of the content).
For Part B of your question, yes, the free folios count against the download cost. You can read more about that in this thread: http://forums.adobe.com/message/4064294#4064294. Bob provided a good set of answers around how free folios work, in particular in relation to multi-issue publications and the iTunes store.
Hope this helps,
Neil

Yet another standby question...

Hi gurus,
Please help to resolve the quiz. I have completed manual physical standby installation. It is up and running. I then decided to install Grid Control and to use Data Guard for the standby creation. I've successfully installed GC, deployed all agents, I can see my previous standbys, life is good in short. Now, when I am trying to create the second standby for my production database using the Data Guard I stuck on a logical question:
On the step 3 of Data Guard standby creation, there is a note, saying:
The instance name (also referred to as the SID) must be unique on the standby host.
Yeah, fair enough. But i can't understand what should I do next? I have:
db_name YELLOW - primary prod
db_name YELLOW - standby prod 1st
and i need db_name YELLOW - standby 2nd
But I can't create it on the same server where the first standby resides.. What options do I have? Do I need to create the second standby on another server? Do I need to kill 1st standby? Is there any way to avoid this conflict? I am confused. I have no equipment for TWO standby servers... I thought I can install there up to 9 standbys.. But it seems to be a problem.. And definitely, I cannot give my second standby other name than YELLOW as all my applications are strongly tied on db_name...
Friends, please clarify this if you can. I am kinda lost in here..
Thanks as usual,
Maria

well, that's a good question! :)
because I don't have spare server for the standby. the question is not about: 'should I or should not put more than one standbys in one server' , but more about: 'is there any way to put two standbys with the identical db_names in one server'. I know that I probably sound unprofessional, but I just wanna know.. If the answer is 'no way', I will kill the first standby then and recreate the second one using DG with the correct name.
Thanks for writing to me,
M.

Another preview question

Similar Messages

Maybe you are looking for