Another Printing Question

I have a customer that using Loftware for label printing. The software uses and RFC listener to receive print requests initiated by SAP.
The documentation states
"Similar to receiving IDocs, the [RFC] Listener will register with SAP. This will take the form of a CALL FUNCTION ... DESTINATION statement in and ABAP program in SAP"
Since xMII doesn't provide ABAP code. do you think its possible to connect to thier RFC listener using Business Logic?

Doug,
The message services in xMII have the ability to listen to RFC/BAPI calls and may be able to meet your requirements. It's at least something worth looking in to. Although I think that Udayan's suggestion is also a valid solution.
-Sam

Similar Messages

Another Printer question

How do I and what do I need to hook up my HP Printer so I can print off things off my laptop?
We have a wireless router, its in the basement next to our cable hook up.. Do I run the Printer through this? Help!!!
Any help would be appreciated!
Thanks

It depends on if the HP printer you have has networking capabilities. What's the model and how old is it? Do you know if it has wireless built into it or if it has an ethernet jack (looks like a wider phone plug) on the back?

How do I add another printer to my MacBook pro 13 inch?

I am having trouble figuring out how to add a HP printer to my laptop? Any sugestions?

Tell us what you've tried and where you are having trouble. Tell us the printer model. Do you have the latest drivers? How are you connected to the printer? Lots of questions... You say add another printer. Please clarify.

Hello everyone, How do i add another printer to my HP Solution Center?

I have an HP 6500 that comes up on the solution center. I also have an HP C8180 hooked up to my computer and would like to scan etc from the HP Solution center, how do I get the 2 printers to figure on the Solution Center?

Tell us what you've tried and where you are having trouble. Tell us the printer model. Do you have the latest drivers? How are you connected to the printer? Lots of questions... You say add another printer. Please clarify.

Image Printing Question

Hello,
Bottom line summary: How do I use the Media and Quality setting to get a good image?
I have an image printing question for an HP 8600 Office. I am trying to get a decent quality image to print
on regular paper. I gather that I will not get the quality of a photo printer. I gather I'm supposed to use
HP glossy paper. Please read on ...
Images come out grainy (rastery) when embedded from an MSPaint project, and if I use Word. However when I printed just an image from image viewer it came like a photo ... but I can't remember what I did. It definitely is capable of printing better. My cartridges all check out, etc. I did the Print Quality Report ... I sure wish I could get that quality when I print other things.
I tried messing with different settings from the Print - Preference. The Quality (Best, Normal, Draft) doesn't effect the outcome. I tried going into Print - Preference - Media and it makes a difference. I can't figure out which is the best setting for plain paper ... but it's not plain paper. The image rendering algorithm appears to be different for different Media settings. I also tried setting the Advanced Resolution to Maximum DPI. I haven't been totally methodical about this as I was in a rush.
I see that the printer is being "smart", perhaps a little too smart.
So my question is multipart:
- Is there documenation on the what the Print - Preference - Media settings do?
- How do I get it to not use grainy/rastery image method, but use the nicer photo method?
- Should I print Maximum DPI?
Thanks,
- Dave -

Hi @DaveGold , and welcome to the HP Forums!
I hope you had a great holiday!
I see you're looking into photo setup options. I'd like to help!
First I'd recommend this document on Changing Print Settings in Windows 7. This document should show all the settings you're looking into.
Also, another thing to keep in mind, when you select 'best print quality' and 'photo paper'. It will only be as good as the source image.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

General Simple Linux Printing Questions

So, I'm using Arch Linux with XFCE. In Ubuntu, it's relatively simple to set up printing. However, on Arch Linux, I don't know how to do it. I have a few simple questions:
* Are all those "easy to use" printing setup GUIs just configurators/frontends for cups?
* I have an HP printer, should I use hplip?
* What is hplip exactly? Is it another printing system like cups? Is it a cups addon?
* Is it easy to set up printing in Linux given that you have a pretty good printer that is "linux compatible"?

iBertus wrote:
solarwind wrote:
So, I'm using Arch Linux with XFCE. In Ubuntu, it's relatively simple to set up printing. However, on Arch Linux, I don't know how to do it. I have a few simple questions:
* Are all those "easy to use" printing setup GUIs just configurators/frontends for cups?
* I have an HP printer, should I use hplip?
* What is hplip exactly? Is it another printing system like cups? Is it a cups addon?
* Is it easy to set up printing in Linux given that you have a pretty good printer that is "linux compatible"?
1.) Yes, most are simply CUPS frontends.
2.) Yes, you should.
3.) It's a set of printer drivers for HP printers. It supports most printers and their functions.
4.) Yes, you just need to find the correct driver for the printer and set it up using the CUPS web-gui.
Remember, after running CUPS, you can access the interface from http://localhost:631 in a web browser.
Thanks! I set it up for my HP and it worked great!
However, when I run any of the hp-* tools from the command line, the copyright notice gets shown, then after a few milliseconds to a few seconds depending on which hp tool I run, another copyright notice gets shown and it freezes.

How do I add another printer to my laptop?

How do I add another printer to my laptop? I used to go to "add printer" and it would automatically find the printer I was near and I could add it. It doesn't allow me that anymore

Open Accounts preferences (Users & Groups if you are running Lion.) Click on the lock icon and enter your admin password. Click on the Add [-] button to create a new account. Configure the account with username and password as well as set they type of account - admin, standard, or managed.

I will try to print from word to the Adobe printer. Sometimes it just freezes. I cannot select another printer.

I will try to print from word to the Adobe printer. Sometimes it just freezes. I cannot select another printer. It’s like all my printers are gone. Sometimes I get an “Unable to Connect” error and sometimes I get “1 document in printer queue”. No matter what printer I choose after I try to go to Adobe, I cannot connect to a printer. The only solution I have come up with is a clean reboot which I can't afford to do 4-5 times a day.
Currently on Acrobat XI Pro 11.0.09

Hi Tymuls,
The first step I would try is delete the Adobe pdf printer and then repair Acrobat.
Repairing Acrobat will bring back the pdf printer. We released an update yesterday i.e. 11.0.10. try updating to the latest version and check.
Have you tried uninstalling the software and reinstalling it.
You might also want to check the performance in a new admin user account.
Regards,
Rave

Check overflow on another printer

Hi All,
I'm working on the check printing program in transaction F110 and program RFFOUS_C. Is there a way that the 1st page be printed on 1 printer and the overflow on another printer? The check preprinted form is in 1 printer and the plain paper in another printer.
Please help.
Thanks.
Regards,
April

cavenewt wrote:
I found the spool files in /private/var/spool/cups, and copied the cups folder to the desktop
The file that have a name that begins with "c" are control files. They contain the specific printer settings etc that are to be used. They do not contain any document data.
The files that begin with "d" should be PDF files. You should be able to add the .pdf extension to the filename and open with Preview. You will most likely have to change the ownership and permissions of the files to work with them.
Matt

Another newb question: multiple virtual servers

Hi, I have yet another ignorant question. I have several unrelated web projects that I am working on, and I would like to be able to set up a virtual server for each one for testing purposes, such as: http://project1, http://project2, http://project3. Can someone tell me if this is doable, and if there are any tutorials/resources on this for someone who has 0 experience running a web serer? Sorry for being so ignorant!

Yes, it is doable.
You can setup virtual server either by IP or by name.
If you have one IP, and want to set them up by name (ex. http://project1, http://project2, http://project3) you can do so easily with this type of configuration:
<virtual-server>
    <name>mydomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.mydomain.com</host>
    <document-root>/www/domain</document-root>
</virtual-server>
<virtual-server>
    <name>myotherdomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.myotherdomain.com</host>
    <document-root>/www/myotherdomain</document-root>
</virtual-server>
....The important part here is that
a) all virtual servers share the same HTTP listener
b) which virtual server serves the request depends on the $HOST request header send by the client. Sun Web Server does the matching for you. It will match $HOST vs. the virtual server's host attribute. Depending on which site you connect to the right virtual server will be used.
c) if the $HOST request header does not match any of the virtual servers, then the default virtual server defined in the HTTP listener will be used.
To create a virtual server, use the Admin GUI, access the configuration, and then add new virtual server. Or use the following CLI command.
wadm> create-virtual-server --config=myconfig --http-listener-name=http-listener-1 --document-root=/www/docs/myserver.com --host-pattern=myserver.com --log-file=../logs/myserver.com-error_logs myserverHost pattern will be used for matching. Some of this elements might be optional.
Hope that helps. And keep the questions coming :D
Edit: Also check the documentation
Using Virtual Servers in SJS Web Server 7.0

Do I network or buy another printer?

Hi all,
Here's the problem: We have an old iMac from which I poached the printer (Epson USB Stylus Color 880) to go with one of my Beiges. But the user of the iMac (venerable spouse) would like to use a printer occasionally.
The iMac is in a small office across a large, open living area from the printer.
I know nothing (NOTHING) about networking. I don't think stringing ethernet cable up through attic, etc. is worth the trouble and hole-drilling.
So ... is there another way to network the printer to the iMac? An Airport card I think costs more than a new cheap printer. Are there other wireless solutions? If yes, must they have line-of-sight access between iMac and printer? It seems wasteful to me to buy another printer (that would make 3 Macs, 3 printers).
Remember, now, networking is a foreign language to me, so be gentle! Thanks!
Tina

Tina,
Do you have other reasons to network that would justify the cost? One word of caution about buying a third printer, will you use it enough to keep the ink fresh? Many people have the ink dry out before they get their money's worth out of it.
I am reminded of two stories. One business associate spent $900 to network a $150 printer. The other reasons for networking were never realized. Cheaper to buy another printer. Now networking is much cheaper.
Second story, a lady at Weyerhaeuser in 1988 wanted a to try a Mac for desktop publishing. She had to convince her bosses that not going IBM was justified. The Apple dealer loaned her a system with a laser printer for a one month test. In one week, she had the engineering department newsletter completed, a task that took her one month on their IBM network. In two weeks, she had permision to buy TWO Macs and she said that without any training, she had the second computer unpacked, set up and networked to share the $5,000 Laserwriter. And she was not a computer technician.
A third printer is the simplest. If all printers were HPs, you could share the ink cartridges but the Epson printers do not allow for ink swaps. Wireless is the most elegant when setup with a print server.
My daughter just emails the document to another other computer to get to the printer of choice. If none of your printrs are network printers, you are really networking computers and letting one be the print server. Sounds a lot like email. That is my teenagers approach.
FWIIW,
Jim

Printer question: Is it possible to print 2 pages in 1 side paper?

Printer question: Is it possible to print 2 pages in 1 side paper? If so how ?

Duplicate post.
Printer question: Is it possible to print 2 pages in 1 side paper?
Re: Printer question: Is it possible to print 2 pages in 1 side paper?

Black ink not printing - printhead correctly prints in another printer

Black not printing. (All HP inks) Replaced head - black still not printing. Tested head in another HPprinter - works fine. Please answer - Is there software, wiring, physical issue with the black only? (Tried rebooting printer and cleaning already)

Hi , I understand that you are having issues with the black not printing, you have replaced the printhead in another printer and it prints fine. I would like to help you.
I am assuming that you used the same cartridges in the printhead when trying them in another printer, let me know if you didn't please. Since the new printhead works in another unit, it looks like it would be a hardware issue with the printer and it would need to be serviced. I have provided all the documentation for resolving this issue, most likely all the steps were done previously. Documentation for resolving the black not printing: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Premium C309a... This document provides instructions for manually cleaning the cartridge contacts.'Ink Cartridge Problem - The Following Ink Cartridge(s) Appear to Be Missing or Damaged' Message Dis... Here is a document for manually cleaning the printhead.'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Message Displays on the Computer... Please Contact HP Support for further assistance. Fill in the model number and the form to receive a case number for quicker assistance. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

YAPP (Yet Another Printing Problem)

I've found another printing problem - this time with colour printing.
To my
surprise, Forte (3.0.E.0) can print in colour (at least on a HP 690C,
using
NT drivers for the 660C, the printer being connected to a Win95
machine).
I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?
Is this another of the 'Printing works fine as long as it happens
non-locally?'
features?
Thanks
Jamie Anstice
Programmer/Analyst, University of Canterbury
New Zealand

I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?Hi Jamie,
I wonder if this is related to the printing feature I discovered
where things I print from Forte have a strong tendency to come out in
the same colours as my windows desktop, which is
typically yellow-on-black.
- Ed
================================================================================
Eduard E Havelaar, Information Services Section, University of Canterbury
email: [email protected]
phone: +64-3-366 7001 extn 8910
fax: +64-3-364 2999
snailmail: Private Bag 4800, Christchurch, New Zealand

Before I buy: speed and printer questions

I am looking to buy a new TC 500gb version to replace my linksys WRT54G. To upgrade the wireless router as well as start a backup system I have yet to ever initiate.
Two questions/concerns come up:
#1) After the initial back up to TC I understand there are hourly incremental back ups - Can that time interval be adjusted, and how long does that back up take (I do now add much data/ files to my main Comp usually) also during those incremental back ups does that affect the computer much, such as if I am playing an internet game, will I lag out while it is backing up every hour?
#2) Setting up a printer through usb port to be accessed by my home network. My HP C6180 all in one works fine being seen through the aged, but battle tested linksys, any reason it shouldn't work with the TC?
Thanks for any insights you might have in this regard.
I have cable isp access, My Main Comp is where the cable modem and TC would be, I have a G4, a G5 and a MBP scattered around the house accessing via wireless.
Message was edited by: Steven Swift

Hi Steven, welcome to the discussions.
After the initial backup (recommend that you use ethernet for this), TC will backup incrementally every hour assuming you will be using Time Machine. There is no way to alter this with Apple software, but a number of users have reported satisfaction with Time Machine Editor, http://timesoftware.free.fr/timemachineeditor/, which will allow you to schedule backups whenever you would like. This might be a good solution if you notice slow downs with other devices during a backup session.
Backups should be relatively quick, but be aware that very small changes in some programs (like Entourage, vmFusion, Parallels) require the entire database to be backed up, not just the small change that might have been made.
The printing question is the most difficult as the boards are busy with users who are having troubles in this regard. Perhaps some other users have used the same HP and can comment. Bear in mind that if your HP is compatible, only the printing function will work through the network. Scanning and other advanced functions are not supported.

Another Printing Question

Similar Messages

Maybe you are looking for