Another Problem In Generating Forms
OK, so I created a local repository so I can generate a JHeadstart app from a form, but now, when I try to run the App Module, I get a:
INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
Also, when I try to open the App Module (or any model component) I get a
"Warning: there are java errors for this object. The wizard will be read-only until they are corrected."
The Error message goes on to specify a file that it's looking for, but I can't even see the java in the project in JDev and the file it is pointing me to doesn't exist. (???)
Got any ideas what I need to do to fix this?
Joe
Hi Steven,
Well, it works for another module, but not this one so I don't think that is the problem.
Here is the long version of the error:
JBO-30003: The application pool (.11722597011) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:358)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:340)
at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:700)
at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject(ApplicationModuleDefImpl.java:232)
at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:401)
at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:139)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:80)
at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2468)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:536)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
----- LEVEL 1: DETAIL 0 -----
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:358)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:340)
at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:700)
at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject(ApplicationModuleDefImpl.java:232)
at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:401)
at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:139)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:80)
at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2468)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:536)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
----- LEVEL 2: DETAIL 0 -----
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:358)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:340)
at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:700)
at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject(ApplicationModuleDefImpl.java:232)
at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:401)
at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:139)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:80)
at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2468)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:536)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
----- LEVEL 3: DETAIL 0 -----
oracle.jbo.NoDefException: JBO-25002: Definition JhsRetry.model.Fmu100efAppModule of type ApplicationModule not found
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:358)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:340)
at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:700)
at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject(ApplicationModuleDefImpl.java:232)
at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:401)
at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:139)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:80)
at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2468)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:536)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
at oracle.jbo.client.Configuration.createRootApplicationModuleFromConfig(Configuration.java:1519)
at oracle.jbo.jbotester.ConnectionInfo.useApplicationModule(ConnectionInfo.java:129)
at oracle.jbo.jbotester.MainFrame.init(MainFrame.java:410)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:394)
Similar Messages
-
Another Problem with Oracle Forms 10G
Hi Experts;
Previously I posted here a problem was having with Oracle Form, when I tried to execute it (Internet Explorer has closed this webpage to help protect your computer. A malfunctioning or malicious add-on has caused Internet Explorer to close this webpage) .
However, with the help of a good Buddy of this forum, I could solved the problem and my forms were running properly. But today, i don't know how it's giving me a new problem. When I choose Run Form, I get this error (website restore error. Internet Explorer has stopped trying to restore this website. It appears that the website continues to have a problem.)
Any suggestion to solve this problem?
Thanks for your help.
Regards
AlHi Aamir;
I didn't upate file, but I don't know how, but last sunday the google toolbar was installed. I removed it already yesterday, but now I got this problem, I don't know if the installation and then, removing this toolbar, updated any important file.
The thing is, now I can not execute my forms.
Regards;
Al -
Another problem when running form 9i
hi,
I have install forms 9i R2 succeefully on my PC.
I nave OC4J up and running.
When i build any form and run it, IE tell me an error
"MD5 digest error for oracle/ewt/lwAWT/lwWindow/LWWindow.class."
and "load: class oracle.forms.engine.Main not found." when click on "reload" after the first error.
thanks in advice.Hi, Andrey
did you solve problem?
I've also install 9iAS and 9iDS.
I've made simple form and .... I can't check it, because "The page cannot be displayed"
Do you know why? -
Problems when generating forms from Module Generator
I am trying to generate a form from a module in Module Generator. The form is generating OK, but when design editor tries to show the form in the browser it doesn't work.
This is the URL it is trying to use:
http://127.0.0.1:8888/forms90/f90servlet/?form=/\MANAGE_ACCOUNTS&userid=adam/xxxxxxx@oraserve
When I run a form from Form Builder, I get something like this:
http://127.0.0.1:8888/forms90/f90servlet?form=C:\Temp\Dev\WOOL_MAIN.fmx&userid=ADAM/xxxxxx@oraserve&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES
My server based URL is:
http://127.0.0.1:8888/forms90/f90servlet
I'm trying to set the generator preferences but just can't seem to get it right :(
can anyone help?
thx
adamTry the following solutions :
1) Check on in IE -> Tools -> Internet Options -> advanced -> allow active content to run in files on My Co
mputer
2) Make sure that you have in the Internet Explorer Tools -> Internet Options -> Advanced tab -> Check the check box
Enable third party Browser extensions. It will be under browsing. -
Error while generating form 16 in portal - Screen output without connection
Dear Gurus,
We are facing error while generating form 16 through portal and getting the below error in portal.
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_FAILURE
When we checked for dumps in R/3 the following dump is coming:
DYNPRO_SEND_IN_BACKGROUND with error message :
Message class : FPRUNX
Message number: 102: No job started.
Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
We are not getting clue as to why this is happening. <<Text removed>>
Regards
Edited by: Matt on Jul 27, 2011 9:50 AMDear,
This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
it. And try to call same transaction again.
BR, Deepak -
Problem in generating oracle 10g reports to rtf Template? (Emergency)
Hi Team,
I had a problem in generating rdf to rtf template.. I had an rdf template with place holders like this
Hi i "Employee" <Empno> and my salary is <Empsal>
but after the generation by using BIBatchConversion , i am getting partial rtf file like this
Hi i "Employee"
i am not getting the rest of the design... do i need to overwrite the rtf manually or do we have any other conversion process when we are using placeholders in rdf reports...
Regards
Bhu1hi...i already done what u had suggested but the error still come up.
DECLARE
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
PAUSE;
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('REPORT_OBJ');
ADD_PARAMETER(PL_ID, 's_sin_no', TEXT_PARAMETER,:scrap_delivery_request.sin_no);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'C:\New Forms\REF_SF_510.rdf');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'PDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_edmund.main');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_edmund.main') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=' || 'rep_edmund.main';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END;
Edited by: baguhan on Jul 4, 2009 12:59 AM -
Problem in tabular form based on dynamic view and pagination
Hi All,
I have a manual tabular form based on a dynamic view. The view fetches the records based on search criteria given by the user in all cases. But this view fetches ALL records when user clicks on pagination, without considering the search criteria. This is the problem I am facing.
I am doing the following:
Since tabular form does not support pl/sql function returning query, I cannot use a table directly. I need my results based on search criteria selected by user. Hence I created a dynamic view and used a "INSTEAD OF UPDATE" trigger to update the table.
I use a set bind variables procedure, on load before header for setting the variables.
This view fetches the correct data based on user search always. It creates a problem only in one situation, when using pagination in the report.
The example can be found at:
http://apex.oracle.com/pls/otn/f?p=19399:1:
username = [email protected]
pwd = kishore
Here if "manager name" is entered as test, we get 5 records in "Summary of requests" report and 5 records in "Inactive Requests" report. When user clicks on Pagination in any of the reports, ALL the 7 records get fetched in "Summary of Requests" and 6 records in "Inactive Requests". How can I overcome this problem?? The report must consider the search variables even when pagination occurs.
Is this because, the inbuilt "html_PPR_Report_Page" executes the region query once again by considering all search variables as NULL?
Backend Code is at:
http://apex.oracle.com/pls/otn/
workspace: sekhar.nooney
Username :[email protected]
pwd: kishore
application id = 19399
My region code is something like:
select *
from regadm_request_v
where access_type = :F110_REGADM
and status <> 'INACTIVE'
order by request_id
My view code is:
CREATE OR REPLACE VIEW REGADM_REQUEST_V
AS
SELECT *
FROM REGREGOWNER.REGADM_REQUEST
WHERE upper(employee_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_NAME),'%')||'%'
AND upper(manager_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_NAME),'%')||'%'
AND upper(employee_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_SUNET_ID),'%')||'%'
AND upper(manager_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_SUNET_ID),'%')||'%'
AND upper(request_date) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_REQUEST_DATE),'%')||'%'
AND upper(USAGE_AGREEMENT_RECVD) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD,'~!@',NULL,REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD)),'%')||'%'
AND upper(STATUS) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_STATUS,'~!@',NULL,REGADM_REQUEST_PKG.GET_STATUS)),'%')||'%'
AND upper(REQUEST_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_REQUEST_APPROVED,'~!@',NULL,REGADM_REQUEST_PKG.GET_REQUEST_APPROVED)),'%')||'%'
AND upper(nvl(APPROVAL_DATE,sysdate)) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_APPROVED_DATE),'%')||'%'
AND upper(APRVL_REQUEST_SENT) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS,'~!@',NULL,REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS)),'%')||'%'
AND upper(NOTIFY_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION,'~!@',NULL,REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION)),'%')||'%'
I would be glad for any suggestions.
Andy/Varad any ideas? You both helped me a lot on my problems for the same application that I had faced before in More Problems in Tabular form - Please give me suggestions.
Thanks,
SumanaHi Andy,
The view and the package for setting bind variables work properly in my entire application other than the pagination. A pity that I came across this only now :(
I have used this same method for holding variables in another application before, where I needed to print to PDF. I used this approach in the other application because my queries were not within the APEX character limit specified for the "SQL Query of Report Query shared component".
In this application, I initially had to fetch values from 2 tables and update the 2 tables. Updateable form works only with one table right? Hence I had created a view. Later the design got changed to include search and instead of changing the application design I just changed the view then. Still later, my clients merged the 2 tables. Once again I had just changed my view.
Now, I wanted to know if any method was available for the pagination issue (using the view itself). Hence I posted this.
But as you suggested, I think it is better to change the page design quickly (as it would be much easier).
If I change the region query to use the table and the APEX bind parameters in the where clause as:
SELECT *
FROM REGADM_REQUEST
WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
I also changed the ApplyMRU to refer to the table.
Here the pagination issue is resolved. But here the "last Update By" and "Last Update Date" columns do not get updated with "SYSDATE" and "v(APP_USER)" values, when update takes place. Even if I make the columns as readonly text field, I am not sure how I can ensure that SYSDATE and v('APP_uSER') can be passed to the columns. Any way I can ensure this? Please have a look at the issue here: http://apex.oracle.com/pls/otn/f?p=19399:1:
I have currently resolved the "last update" column issue by modifying my view as:
CREATE OR REPLACE VIEW REGADM_REQUEST_V
AS
SELECT *
FROM REGADM_REQUEST
I modified my region query to use APEX bind parameters itself as:
SELECT *
FROM REGADM_REQUEST_V
WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
And I use the "INSTEAD OF UPDATE" trigger that I had initially written for update. The code is:
CREATE OR REPLACE TRIGGER REGADM_REQUEST_UPD_TRG
INSTEAD OF UPDATE
ON REGADM_REQUEST_V
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
UPDATE REGREGOWNER.REGADM_REQUEST
SET MANAGER_EMAIL = :NEW.MANAGER_EMAIL
, EMPLOYEE_EMAIL = :NEW.EMPLOYEE_EMAIL
, STATUS_UPDATE_DATETIME = SYSDATE
, USER_UPDATE_ID = (SELECT v('APP_USER') FROM DUAL)
WHERE REQUEST_ID = :OLD.REQUEST_ID;
END;
Please let me know how I can resolve the "last update" column issue using the table itself. (Just for my learning)
Thanks,
Sumana -
Error in generating form with 6i
I have installed designer 6i rel 2 with form developer 6i on NT
4.0.
When in design editor, I want to generate the form with generate
module, the system generate "CDR-21600: A running Generator or
Utility has failed."
Also in action column writes: " It is possible that the internal
cache is now in an inconsistent state. You are therefore
recommended to close and restart the application."
Could anyone tell me what is the problem and how to solve it.
thanksHere is an document which describes some known causes of CDR-
21600 errors. I hope it will help you.
PURPOSE
To describe some known causes of CDI-21600 errors and to
suggest possible solutions and workarounds.
SCOPE & APPLICATION
This note was written for users of Oracle Designer releases 2.1.x
and 6.0.
CDI-21600 errors occur most frequently during Design Capture and
when generating forms with the Forms and WebServer generators.
Investigating CDI-21600 errors
In Oracle Designer Release 2.1.2 and Release 6.0, this error has
the form:
CDI-21600 'A running generator or utility has failed'
The Release 2.1.1 error message was: 'Generator or Utility throw
an Exception'
The CDI-21600 error message means that the generator is hitting
an unhandled exception, also known as a GPF (general protection
fault). The CDI-21600 error masks the underlying exception error.
To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
Known Causes of CDI-21600 Errors and Possible Solutions
Some of the reasons why CDI-21600 errors occur are listed below.
1. A common cause of CDI-21600 errors is failure to install the
necessary
Developer patches.
See [NOTE:64630.1] Developer Patches required to run
Designer with Developer
2. Check that Designer is running on a supported database. Also
check that the
TNS connection is correct.
See [NOTE:60705.1] Designer Certification Matrix (HTML)
3. Check for 'dangling' foreign keys, in other words FKs no longer
owned by any
table in the repository. Delete all invalid constraints.
Invalid constraints may be created if you use the repository
dump utility to
dump and restore external foreign keys referencing tables
shared into the
application system, without dumping and restoring the tables
that own them.
If you restore a complete dump (rather than a 'skeleton' one),
and then use
the 'Reconnect Share Links' option when restoring, you may be
able to
resolve this problem.
To get a complete list of 'dangling' constraints in your
repository, connect
using SQL*Plus and use the following query:
SELECT app.name, key.name
FROM ci_application_systems app, ci_constraints key
WHERE key.table_reference IS NULL
AND key.application_system_owned_by = app.id;
You can also run CKAZANAL.ANAL_REFERENCES on your
repository and delete all
the invalid constraints that it finds. You can run the Repository
Analyzer
from: Front Panel -> Repository Administration Utility -> Utilities.
NOTE: There may be inconsistencies in the repository that the
Repository
Analyzer cannot fix. You might solve such problems by
dropping all the
tables of your application, recreate them from the ERD,
then use the
DDT and recreate your modules.
[BUG:847190] CDI-21600 during forms generation: 'dangling'
foreign key
"Since the generator is running on a repository that contains
invalid
constraints and the Repository Analyzer solves the problem,
bug closed as
unfeasible to fix."
4. Check your modules for invalid or missing references such as
missing window
placements.
5. Try generating your module against default templates and
object libraries.
6. When capturing forms or libraries, try capturing the form or
library without
application logic, then capture the application logic on its own.
See [NOTE:1064690.6] CDI-21600 when capturing design of
form with
application logic
[BUG:757541] DESCAP: CDI-21600 error reported when
capturing with
application logic
Fixed In Ver: 6.0
[BUG:926383] Duplicate of [BUG:757541] This has been fixed in
2.1.2 patch
779559. However you would be advised to apply a later patch
such as 855635
which fixes more bugs in this area.
7. Make sure that all objects that are referenced by the form have
been
captured into the repository before capturing the form.
8. A CDI-21600 will occur if a lookup usage displays only one
column of
datatype DATE or if the column of datatype DATE is displayed
as the first
item in the block.
Workaround
Add more column usages to the lookup block and do not
display the DATE data
type column usage as the first item in the block.
9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
Fixed In Ver: 6.5.3.0
Workaround
Make sure that you have an argument in the called module that
is mapped to
the "Argument Passed Value" in the calling module. The only
way to get this
mapping back once the APV has the <Module Argument> label
is to delete it
and recreate it.
10. [BUG:801736] CDI-21600 on design capture of a form with
subclassed object
Fixed In Ver: 6.0.3.1.0 (backport)
Fixed In Ver: 6.5
You have an item that has been subclassed to an object.
Checking the Design
Capture option 'Capture Control Blocks' causes the CDI-21600
error. Uncheck
'Capture Control Blocks' and the problem does not occur. Open
the FMB in
Forms*Builder and look at Data Blocks -> Items. Break the link
to the
object, save the FMB, and the form will capture (similar to
[BUG:794872]).
Alternatively, ensure the link can be established.
11. [BUG:850436] CDI-21600 on generation of a form with template
having
subclassed object group
You try to generate a form out of Designer that uses a user-
defined
template. If a collection of objects in the template is grouped
into an
object group, dragged into the object library and then either
copied or
subclassed into a form, when the form is generated you get a
CDI-21600
error.
12. [BUG:822659] Module generation fails (CDI-21600) with multi-
column PK having
long prompt text
Fixed In Ver: 6.5.3.2
Module generation with multi-column primary key having long
prompt text
causes CDI-21600 with preference MSGSFT set.
Workaround
Shorten the prompt text of PKs may not be not applicable. You
may loose end
user information.
You may have the same problem with a mandatory compound
FK. CASEOFG tries to
generate a message '<P1> must be entered', where <P1>
contains all the
prompts of the bound items from the FK. If you reduce the
length of the
prompts, or set MSGSFT = NULL or WEDI = S or property
Mandatory?=No, it
works correctly.
13. [BUG:792542] Capturing application logic causes CDI-21600
(V2 style
triggers)
Fixed In Ver: 6.5.5
After removal of the v2 triggers, the form captures/merges OK
on 5.0.24.8,
provided patch 875027 has not been applied.
14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
key components
Fixed In Ver: 6.5.11
Generating a module with tables having a primary key not
correctly defined
(no PK component) will cause a CDI-21600 error. This can
occur when
unloading a module from the RON. If you pick up the module
(and only the
module) in the unload set, the table and its PK are unloaded as
a skeleton.
Loading the .DAT file into a new application will create a PK
without a
component.
15. [BUG:771549] CDI-21600 if cannot connect to the DB with
connect string in
Options (Compile)
Fixed In Ver: 6.5.13
If you cannot connect to the DB with the connect string
specified in options
(Compile), the forms generator will fail with CDI-21600.
This problem occurs when you cannot connect to the DB
because:
- the username or password is wrong;
- or the SQL*Net alias is not defined in the TNSNAMES.ORA
file;
- or the SQL*Net listener is not started;
- or the DB is down.
16. [BUG:785106] CDI-21600 when generate master detail form
with preserve layout
[BUG:855812] is a duplicate of this bug.
Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
Fixed In Ver: 6.0
Fixed In Ver: 6.5.3
You have a master-detail Form with the Master having items
partly on a TAB
Canvas. Generate Module works OK. You enter Forms Builder
and move some
items on the tabs (just small changes, items are still on the
same tabs).
You change the look of the Detail and change Records
Displayed. Now in
Designer you generate the Module with Preserve Layout. You
get a CDI-21600
error. The problem might reproduce without doing any changes
in Forms
Builder, just by generating with Preserve Layout.
17. [BUG:891306] If primary key column of lookup in check
constraint comment of
base table
Fixed In Ver: 6.5.5
Workaround
Do not use the name of the bound item that is based on the
primary key
column of the lookup table in a check constraint comment of
the base table.
18. [BUG:896026] Forms gen throws assertion failure in
CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
Fixed In Ver: 6.5.7
A problem is caused by a PL/SQL definition (function, package,
procedure)
being defined as a called module for the module you are trying
to generate.
To resolve the problem and enable the module to be generated,
remove all
Called Modules that are PL/SQL definitions (functions,
procedures or
packages).
See [NOTE:2107207.6] CDI-21600 during generation of module
or Assertion
Failure \cv\cvi\cvibni.cpp
19. [BUG:812333] CDI-21600 generating a web module after
adding an unbound item
Fixed In Ver: 6.5.3.0
Backport [BUG:1280667] raised to fix by 6.0.3.9
You add an unbound item (SQL expression) to a Web module.
When you try to
generate the module you get a CDI-21600 error. If you delete the
unbound
item the Web module generates correctly.
In a test case the problem occurred during validation of the
derivation
text, if the master module component was in a different module.
A workaround
was to rearrange module components so that this was not the
case.
20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
WHEN GENERATING INCORRECT
DERIVATION EXPRESSION
Message
CDR-21605: Failed while processing Module <mod> in function
CCVDiag::TraceGeneratorMessage BOF
Cause
The generator failed due to an unexpected error - the
error indicates the object the generator was processing
when it failed.
Helena -
Problem to generate secret field with JHeadstart 10.1.3.1.0
Hi,
I'm experimentig the new version of Jheadstart and I have a problem to generate a JSF page with a secret field using the Oracle JHeadstart 10.1.3 Evaluation Version.
In fact when I change the display filed in the jheadstart Application Definition Editor to "secret" and then try to generate
jsf pages, i have this message error for both form and table layout :
Could not instantiate JhsApplicationGenerator class: No bean named 'secretPGItemModel' is defined:
org.springframework.beans.factory.xml.XmlBeanFactory defining beans [applicationLayoutGenerator,facesConfigGenerator,
regionMetaDataProcessor,includesGenerator,menuGenerator,nlsGenerator,pageGenerator,treeGenerator,generatorContext,findPageNameFormat,
findPage,wizardFindPage,formPageNameFormat,formPage,wizardFormPage,formRegionPage,wizardFormRegionPage,selectPageNameFormat,selectPage,
wizardSelectPage,treeFormPage,treePage,tablePageNameFormat,tablePage,wizardTablePage,lovTablePage,parentShuttlePage,
wizardParentShuttlePage,intersectionShuttlePage,wizardIntersectionShuttlePage,formPageComponent,tablePageComponent,
selectPageComponent,parentShuttlePageComponent,intersectionShuttlePageComponent,pgItemModelHelper,textInputPGItemModel,
dateFieldPGItemModel,dateTimeFieldPGItemModel,secretFieldPGItemModel,fileUploadPGItemModel,fileDownloadPGItemModel,imagePGItemModel,
editorPGItemModel,displayFieldPGItemModel,dropDownListPGItemModel,checkBoxPGItemModel,radio-verticalPGItemModel,
radio-horizontalPGItemModel,hiddenPGItemModel,lovPGItemModel,pgGroupModel,pgDynamicDomainModel,pgStaticDomainModel,
pgItemRegionModel,pgGroupRegionModel,stackedPGRegionContainerModel,separatePagesPGRegionContainerModel,horizontalPGRegionContainerModel,
verticalPGRegionContainerModel,searchManagedBeanModel,dependsOnItemManagedBeanModel,dependsOnSearchItemManagedBeanModel,
lovItemManagedBeanModel,lovItemInTableManagedBeanModel,editorItemManagedBeanModel,lovItemInAdvancedSearchManagedBeanModel,
lovItemInQuickSearchManagedBeanModel,lovPageManagedBeanModel,fileItemInTableManagedBeanModel,mediaItemInTableManagedBeanModel,
checkboxInTableManagedBeanModel,treeManagedBeanModel,parentShuttleManagedBeanModel,intersectionShuttleManagedBeanModel,
collectionModelManagedBeanModel,queryBindParamsManagedBeanModel,queryBindParamsDomainManagedBeanModel,defaultValuesManagedBeanModel,
wizardPageManagedBeanModel,wizardPageListManagedBeanModel,breadcrumbManagedBeanModel,customManagedBeanModel,velocityInitializer,
formGroupLayoutFactory,tableGroupLayoutFactory,table-formGroupLayoutFactory,select-formGroupLayoutFactory,tree-formGroupLayoutFactory,
treeGroupLayoutFactory,parent-shuttleGroupLayoutFactory,intersection-shuttleGroupLayoutFactory,
pgModelFactory,templateBindingsFactory,pgModelValidator]; root of BeanFactory hierarchy
My Jdeveloper Version is : 10.1.3.0.4 (SU5)
thanksSteven
I followed your instructions and it works
I recently downloaded the production version of JDeveloper Studio Edition Version 10.1.3.1.0.3984
Build JDEVADF_10.1.3.1.0_NT_061009.1404.3984
I installed JHeadstart evaluation version.
I recreate the same example with this new version of JDeveloper
I found the bean definition in the jag-config.xml (by default)
I removed the "#ITEM_PARTIAL_TRIGGERS_PROP" from the template (default/item/form/formSecret.vm )
I thought it will work but unfortunately it doesn't work and and I got the same error
Could not instantiate JhsApplicationGenerator class: No bean named 'secretPGItemModel' is defined: org.springframework.beans.factory.xml.XmlBeanFactory defining beans [applicationLayoutGenerator,facesConfigGenerator,regionMetaDataProcessor,includesGenerator,menuGenerator,nlsGenerator,pageGenerator,treeGenerator,generatorContext,findPageNameFormat,findPage,wizardFindPage,formPageNameFormat,formPage,wizardFormPage,formRegionPage,wizardFormRegionPage,selectPageNameFormat,selectPage,wizardSelectPage,treeFormPage,treePage,tablePageNameFormat,tablePage,wizardTablePage,lovTablePage,parentShuttlePage,wizardParentShuttlePage,intersectionShuttlePage,wizardIntersectionShuttlePage,formPageComponent,tablePageComponent,selectPageComponent,parentShuttlePageComponent,intersectionShuttlePageComponent,pgItemModelHelper,textInputPGItemModel,dateFieldPGItemModel,dateTimeFieldPGItemModel,secretFieldPGItemModel,fileUploadPGItemModel,fileDownloadPGItemModel,imagePGItemModel,editorPGItemModel,displayFieldPGItemModel,dropDownListPGItemModel,checkBoxPGItemModel,radio-verticalPGItemModel,radio-horizontalPGItemModel,hiddenPGItemModel,lovPGItemModel,pgGroupModel,pgDynamicDomainModel,pgStaticDomainModel,pgItemRegionModel,pgGroupRegionModel,stackedPGRegionContainerModel,separatePagesPGRegionContainerModel,horizontalPGRegionContainerModel,verticalPGRegionContainerModel,searchManagedBeanModel,dependsOnItemManagedBeanModel,dependsOnSearchItemManagedBeanModel,lovItemManagedBeanModel,lovItemInTableManagedBeanModel,editorItemManagedBeanModel,lovItemInAdvancedSearchManagedBeanModel,lovItemInQuickSearchManagedBeanModel,lovPageManagedBeanModel,fileItemInTableManagedBeanModel,mediaItemInTableManagedBeanModel,checkboxInTableManagedBeanModel,treeManagedBeanModel,parentShuttleManagedBeanModel,intersectionShuttleManagedBeanModel,collectionModelManagedBeanModel,queryBindParamsManagedBeanModel,queryBindParamsDomainManagedBeanModel,defaultValuesManagedBeanModel,wizardPageManagedBeanModel,wizardPageListManagedBeanModel,breadcrumbManagedBeanModel,customManagedBeanModel,velocityInitializer,formGroupLayoutFactory,tableGroupLayoutFactory,table-formGroupLayoutFactory,select-formGroupLayoutFactory,tree-formGroupLayoutFactory,treeGroupLayoutFactory,parent-shuttleGroupLayoutFactory,intersection-shuttleGroupLayoutFactory,pgModelFactory,templateBindingsFactory,pgModelValidator]; root of BeanFactory hierarchy -
IS- Retail- problem while generating delivery in WF30
Hi Guys,
I do have problem while generating deliveries after adjusting the stocks to stores and external customers.
T.Code WF30- Merchandise Distribution for CD/FT process
Scenario :!from DC to Stores process (1)
I am getting an error called for stores is "*shipping Data not Found for item 10,20 and 30" (using one article and 3 stores)*
Another scenario :2 from DC to external Customer(2)
I am getting an error called "No deliveries are generated"
(using one article and 2 customer)
shipping point determination was done in OVL2,
Picking area determination has done with few settings( if anybody guides what and where all the settings to be checked) I given Storage conditions in Article MD, entered Sto loc in Storage loc Deter and condition at IMG>LE>Shipping>Picking
Is it problem in Allocation Table Item category level for second one ?
for both scenarios i am using Allocation Table Item category AAFA
In AAFA,(Alloc Item Cate) SD Type is ZZTA and delivery type is not maintined..(what are the entries should be in the Alloc Tab Item Cat).
but in ZZTA sales order doc type(v0v8) Delivery type is LF
Plz help on this..
regards
HarishHi guys,
I got the answer and i am closing this thread.
Harish -
Hi,
I have some problem in adobe form.................................
I have to design my adobe form in ADOBE DESIGNER layout.
and in the another end i have make my application programe in which i picke
some data from the sap tables. now my problem is that how can i send the data in
my adobe form from my programe i want to print that data on the form.
and always my programe is going to be notresponding.CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'Adobe form name'
IMPORTING
e_funcname = lv_funcname.
IF sy-subrc = 0.
u will get the fm name here.....
use fb_job_open
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = gs_output
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION lv_funcname
EXPORTING
/1bcdwb/docparams = gs_outputpara
wa_data = <> pass value here....as per u r requirement.(interface)
PATH = <>
IMPORTING
/1bcdwb/formoutput = ls_return
EXCEPTIONS
OTHERS = 1.
FP_JOB_CLOSE
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
e_result = result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
regards
Anbu B -
Problem with generate sine 50 Hz
I have a problem with generate sine voltage with freq 50 Hz.
I form waveform with this frequency and sent in to the "AO Write" with update rate equal waveform lenght*frequency. And so I have a cycle of my program 20 ms, but I need a cylce 5 ms.
How I can make it right?
I forming my waveform "Basic Function Generator" with sampling Info equal my waveform lenght.
Message Edited by Unk on 09-28-2005 02:36 PMThe
amplitude
phase
frequency
of the signal are independent parameters.
You can generate the relevant signal using Basic Function Generator VI, then supply this waveform to your AO operation (DAQmx write is polymorphic and allows you to use a waveform directly as the input - those guys at NI are clever ) -
Another problem with SOAP sender
I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this.I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this. -
Getting font problem for printing form in Production server.
Hi experts,
We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
Can any one suggest me on this issue.
Regards,
Sagun Desai.Hi sagun,
Please check the spool request generated on production server using tcode SP01.
Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
The printer connected to the test server might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
Hope this helps.
Regards,
Subodh -
Passing values to another field in APEX form
Hi,
How do I pass a value in 1 field to another field in APEX form ?
I have a hidden field and I need to populate this field by another field.
thanksI found the solution to my problem.
[1] Create a "After Submit" under Computations.
[2] Select 'Item Value' under Type in Item Name
[3] Select "After Submit" under Computation Point
[3] Enterer Item Name, which value needs to be passed in 'Source'
thanks
Maybe you are looking for
-
Kindle app will not open.is there a way to retrieve my books.
My kindle app will not open and I can not get to my books. Any suggestions as to where to go from here?
-
Smart Recorder will not load in Audigy 4
I recently re-installed Audigy 4 and installed all the current updates and Smart recorder will not load. I get a message saying "Smart Recorder has encountered a problem and needs to close". All the other Creative Apps work fine. I am running XP Sp3.
-
Migrate SQLServer2008 DATA to Oracle11g
This is the first time and I followed the Oracle instructions here: Migrating a Microsoft SQL Server Database to Oracle Database 11g The migration seemed to be successful even though it was a 2005.ocp and far as I can see all database objects created
-
Data block corrupted on standby database (logical corruption)
Hi all, we are getting the below error on our DRSITE,it is MANUAL PHYSCIAL STANDBY DATABSE... The following error has occurred: ORA-01578: ORACLE data block corrupted (file # 3, block # 3236947) ORA-01110: data file 3: '/bkp/oradata/orcl_raw_cadata01
-
Hi there, As the title states, this is the error message I get ONLY when trying to render .mov files. I have posted here before with a similar problem related to quick time files. After Creative Cloud does its own updating, I can no longer render .mo