Another problem with audio dropouts in PrE 10

G'day All,
Earlier this year I had a problem with Premiere Elements where audio files from AVC HD clips dragged in from my camcorder were dropping out.
http://forums.adobe.com/message/4267924#4267924
Bill Hunt was able to help me out at the time by confirming that the files weren't conforming - boom boom! That is, all the clips I wanted had been dropped in, but the conforming of the videos had not completed, because I never noticed the little blue progress bar lower-right.
As advised, I tracked down the dodgy PEK and CFA files that had been created incomplete, deleted them, dropped the clips back in to the project, went and made a cup of tea until the blue progress bar stopped running, and the problem was solved.
Now it's back. Not only that, but I cannot find any PEK or CFA files relevant to the project where the problem is occuring. A search yields no results for such files on my hard-drive for today!
(I also note that all such files now seem to have shifted to being stored elsewhere on the harddrive, and not in the originally nominated 'scratchpad' where they were stored during the first round of difficulty.)
I deleted all files and folders I could find that were created today associated with the project the problem occured in, and the project istelf, rebooted, created a new project, and dragged the original videos into it. No conforming occurred! Sound dropouts are identical. Somewhere on my system it would appear that some faulty conforming record relating to these files has been created, but I have no idea where it is, or why it no longer appears to be stored as a CFA of PEK file.
Any ideas? It's doing my head in!
regards,
Bill

Hello JJVANKA,
it might be that the %%pluginname%% plugin is possibly outdated. Could you please check the following:
#Go to [http://www.mozilla.com/en-US/plugincheck/ the Mozilla plugin check site]
#Wait for the plugin check to complete.
#If any plugin is outdated, go to the Website of the plugin to download a recent version!
Kind regards,
Tobbi
Firefox Support Volunteer

Similar Messages

  • Another problems with Audio importing question

    Ok, I've read through lots of the other questions but haven't found my answer. I have a Sony camera that I'm importing some video from. I've done this often with recorded video into iMovie with no problems.
    I just downloaded a show from my DVR to my camera. No problems, audio is fine. I'm not importing this show to iMovie. When I import, the audio is fine both coming out of my camera, and in iMovie. But once the import is finished, the audio is really really quiet. If I crank the volume all the way up, it is audible, but barely.
    I've checked the 3 audio checkboxes, turned all the volume sliders up, made sure in my preferences audio filtering and 'play video to camera' are turned. But still no luck.
    Any thoughts? I'm a MAC newbie so go easy on me. Thanks!
    Mark
    667 MHz PowerPC G4   Mac OS X (10.4.3)  
    667 MHz PowerPC G4   Mac OS X (10.4.3)  

    Thanks for the replies so far. My camera is set to 16 bit audio. I'm not sure if the DVR has an audio output setting but I will check.
    But I don't feel like this will be the problem, only because when I'm importing the movie into iMovie, it plays at normal volume, through both left and right speakers. Its only when I am done importing the movie, and try and replay the clip I've just imported where I lose 95% of the sound and its barely audible. I feel like something is happening within iMovie. That make sense?
    As I said though, I'm far from knowledgable about this stuff.
    Thanks!
    Mark

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • Problems with audio panning.

    Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
    The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
    It is a very recent problem that I wonder may be something to do with preferences or settings.
    We have had no problems with the speakers at all.
    Thanks very much,
    Geoff

    You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
    Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
    problem solved...

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • Problem with audio configuration

    when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

    I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
    instructions at: http://docs.info.apple.com/article.html?artnum=93698
    Thanks giterdone

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • Another problem with SOAP sender

    I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
    Scenario:
    Soap Sender -> PI -> Soap Receiver
    Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
    I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide.  It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call). 
    Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\].  The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
    Problem One:
    The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types.  XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
    Problem Two:
    I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send.  In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
    The other doGoogleSearch fields seem to be missing, i.e.
      <part name="q" type="xsd:string" />
      <part name="start" type="xsd:int" />
      <part name="maxResults" type="xsd:int" />
      <part name="filter" type="xsd:boolean" />
      <part name="restrict" type="xsd:string" />
      <part name="safeSearch" type="xsd:boolean" />
      <part name="lr" type="xsd:string" />
      <part name="ie" type="xsd:string" />
      <part name="oe" type="xsd:string" />
    Does anyone know why:
    (1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
    (2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
    Thanks for any help with this.

    I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
    Scenario:
    Soap Sender -> PI -> Soap Receiver
    Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
    I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide.  It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call). 
    Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\].  The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
    Problem One:
    The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types.  XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
    Problem Two:
    I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send.  In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
    The other doGoogleSearch fields seem to be missing, i.e.
      <part name="q" type="xsd:string" />
      <part name="start" type="xsd:int" />
      <part name="maxResults" type="xsd:int" />
      <part name="filter" type="xsd:boolean" />
      <part name="restrict" type="xsd:string" />
      <part name="safeSearch" type="xsd:boolean" />
      <part name="lr" type="xsd:string" />
      <part name="ie" type="xsd:string" />
      <part name="oe" type="xsd:string" />
    Does anyone know why:
    (1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
    (2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
    Thanks for any help with this.

  • Two problems with audio clips

    Hello,
    I'm having two problems with audio clips:
    1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
    2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
    What am I doing wrong?
    Thanks.

    1. Drag the little hand on speaker icon to drag from
    the Viewer...
    Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
    2. It means your sequence settings don't match the
    properties of the source audio you're putting in it,
    and you either need to change the settings in the
    sequence, or render the audio.
    Ah, that would explain it. Thanks!

  • Premiere pro cc 2014 problems with audio

    I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
    Anyone else experience the same problems?

    Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

  • Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101

    Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..

    sorry for my bad english ..

  • Can't run itunes because it has detected a problem with audio configuration

    What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

    Some people have found the following works:
    Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
    http://docs.info.apple.com/article.html?artnum=93698
    Turn off antivirus/anti spyware
    Go to Control Panel>Add/Remove Programs>Change or Remove Programs
    Select iTunes, then click on Change, then select Repair.
    Restart computer

  • Problems with Audio in iPhone 5

    I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

    Do you have the side switch enabled - do you see orange on the switch above the volume keys.
    Make sure all your settings are turned up.
    Try a restart of the phone by holding the home and power button until it reboots
    If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

  • Problems with audio programs after update to Maverics

    After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

    I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

Maybe you are looking for