Another problem... yet again HELP!

I am having yet another issue with my blackberry curve 8530. I already am aware the battery (CS-2) needs to be replaced due to the fact that I need to charge it 3 times a day. Additionally however, it reboots itself 2 times a day also.. Requiring me to charge it 5 times a day now. Once it reboots the battery becomes completely drained of course. Is there any specific cause to the phone rebooting? Or is it possibly linked to my battery needing to be replaced? I just don't want to spend $50 on a new battery if my phone reboot issue is unfixable.
PLEASE HELP!

Hi britters,
Sorry to hear you're having issues with rebooting and battery life on your BlackBerry® Curve™ 8530 smartphone.
You can rule out any possible software issue that may be causing this by backing up your data using the BlackBerry® Desktop Software and performing a clean reload of your BlackBerry® Device Software. For further instructions, please see the following KB articles.
For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Please test to make sure both issues have been resolved before restoring any data from your backup file. If the software reload does not resolve the issues, I would suggest testing with another battery if possible.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

Another problem I need help on....trying to watch video on laptop using a full screen.

Yep..heres another problem I have...I am trying to figure this out. I want to watch a video or a movie and I can't seem to watch it at full screen capacity....I only am able to watch it on the little box...when I put it for full screen it shows nothing...just a blank grey colored dull mess. I can hear the movie or video playing but no picture. Please if anyone knows what the deal is can you please respond to my problem.

In addition to the (very critical) information Smithy asked for, are you using a "slightly unusual" configuration such as an external monitor on a laptop?
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Yet again help re speed problem

First todays stats
ADSL line status at 1359 on 01/04/11
Connection Information
Line state Connected
Connection time 0 days, 00:00:19
Downstream 1,151 Kbps
Upstream 888 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.5 Annex A
Latency type Interleaved
Noise margin (Down/Up) 23.1 dB / 14.4 dB
Line attenuation (Down/Up) 21.6 dB / 4.6 dB
Output power (Down/Up) 20.2 dBm / 1.3 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 0 / 0
CRC Errors (Down/Up) 0 / 64
HEC Errors (Down/Up) 7 / 0
Error Seconds (Local/Remote) 0 / 0
Hub v2 is connected to filtered master socket. SN and attenuation figures look good to me but download speed is 597 Kbps.
Speedtester shows dsl set at 1151 and ip profile at 750. Is this the cause of disconnections?
Have had BT Engineer visits but no improvement
Anyone any idears please
Keith
Solved!
Go to Solution.

Imjolly
Thanks for the reply - nice to hear/speak again
Yes hub has to be reset 2/3 times per day. so far today at 1030 / 1400 and 1730. The info I was working from off another site is
Noise ratio. The higher the number the better for this measurement. In some instances interleaving can help raise the noise margin to an acceptable level.
6dB or below is bad and will experience no synch or intermittent synch problems
7dB-10dB is fair but does not leave much room for variances in conditions
11dB-20dB is good with little or no synch problems* (but see note below)
20dB-28dB is excellent Mine whis is why I said good
29dB or above is outstanding
Line Attenuation
Measure of how much the signal has degraded between the DSLAM and the modem. This is largely a function of the distance from the exchange. The lower the dB the better for this measurement.
20dB and below is outstanding
20dB-30dB is excellent Mine which is why I said good
30dB-40dB is very good
40dB-50dB is good
50dB-60dB is poor and may experience connectivity issues
60dB or above is bad and will experience connectivity issues "
Do you have other figures?

Another X48C problem, yet again

I read some threads and found that some are having same problem as me, however, my problem is slightly different.
Thermaltake Toughpower 750watts
Q9450 C1 with X48c
1 lg and 1 sony dvd drive
Seagate barracuda 1/2 terabyte(500gb)
Powercolour 3870x2
corsair xms2 DHX 4gb kit
The problem actually started a few wweeks ago when everything, including the mouse, hangs. However a few weeks ago this problem can be solved by a rebooting
Yesterday when i rebooted, the fan turns on and off, sometimes it spinturn for merely a second, or it will spin at a very fast speed then slow down, and then turns itself off again
I tried reseting the cmos a few times(i duno why). I did get into bios and optimised default settings, it hangs after my windows vista loading bar, after another restart it gets into windows, but hangs.
Now when i push the power button, it just spins for a sec, or for a long time, before offing itself.
I took out my ram and gpu and put them back again, but still having the same problem
Is the board dead? anyway to get it to start? i need to use it for more 'demanding work applications'
ADD ON: I cannnot get into bios, i have seen replies of booting from usb, but i cannot get into bios to set 'boot from removable'
Thanks in advance

Try switch off Alimentation cable few minuts (2-3) Do clear CMOS 30sec try again if it don't boot can be damaged bios

Japanese Character Problem Yet Again!!

Hi,
While trying to run a query( containing Japanese characters ) through my java code, I get the following SQLException:
[Microsoft][ODBC SQL Server Driver][SQL Server]Unclosed quotation mark before the character string '[email protected]'.
However if I run the same query through the SQL Query Interfcae manager, it runs just fine.
I am attaching the query too.
Insert into Registration(nvchCustomerID,dtCreationDate,nvchLoginID,nvchPassword,nvchRemindQuestion,nvchOtherRemindQuestion, nvchRemindAnswer,intReceiveEmail,nvchEmailAddress) values('NI200205010001','20020501','ydipak','ydipak','��l��','null','ydipak',1,'[email protected]');
Any help in this direction would be greatly appreciated.
Thanks and Regards

Thw simplest solution to this problem is to use PreparedStatement.
prepare a statement like insert into table values(?,?,?,?,?)
and use bind variables like
pstmt.setString(1,"��l��")
pstmt.setString(2,"��l��")
etc...
saifuddin

MacBook Pro Boot Problems Yet Again

Earlier last month, I posted a topic about how my Macbook Pro "crashed" and I ended up having to reformat my HD and it was working fine afterwards as long as I didn't install any OS X updates.
Just yesterday my Macbook started to just randomly freeze every two seconds when I went to open something, or type a simple word, or just when it started up & loaded the desktop period.
I ran the disk utility to try to verify/repair the disk and that did not work, I kept receiving the message "disk cannot be repaired, please backup, reformat and restore, blah blah" ...
PROBLEM IS.
Now when I turn it on, it always wants to boot in safe mode, but as the little bar is loading, it shuts the entire computer off before it even finishes loading (it starts to load and about less than a min later it shuts off). It happens EVERY TIME I turn my Mac on. What is the problem? Does AppleCare cover this? I've only had my Mac less than a year and already I'm experiencing problems that I shouldn't be having AT ALL.
I don't live close to an apple store, and I'm in college, so I can't just up and drive hours away to find a store.
I have an iPhone 4 and iPod Touch 4th Generation now I'm afraid to even sync it with the Mac when it is fixed because I don't want to lose everything.

Look at these data recovery tools if you aren't backed up:
http://www.macmaps.com/backup.html#RECOVER
Purchase AppleCare if you haven't already. You can do so anytime in the first year.
AppleCare by phone can usually with notebooks setup a mailin to repair with as little as 36 hour turn around in the U.S. The issue you are having may actually be a dying hard drive, or it may just need purchasing Alsoft Disk Warrior, or it may be a power supply issue or RAM issue. As long as it is Apple installed RAM, that's normally covered under warranty if nothing was dropped or damaged by bumping. Same with power supply. A bad power supply in the room can cause power supplies on computers to fail. A good APC surge protector can help protect a computer against spikes and surges not caused by lightning and some poor power. Other poor power has to be diagnosed by an electrician. Good luck!

Wireless problems, yet again :(

Hi im new here but im hoping maybe someone can help me out
I have had problems with BT's Wireless for some time now, I will always get disconnected, so I always have to keep changing the channel which sometimes works, but now my computer will not even connect wirelessly at all but I can connect through an ethenet cable, anyway while I try to connect wirelessly this message keeps coming up
"The settings saved on this computer for the network do not match the requirements of the network", now I have tried changing the channels that does nothing, I have reset the internet nothing, I also tried changing the channel selection from manual to automatic and still nothng, even when I call for help the only things they told me to do I have already done, Im getting quite fed up of having to try and sort these problems, If anyone has any idea of how they can help me I would be very greatful.

You have probably already tried this but:-
Make sure you have the correct SSID & Wifi Encryption passphrase handy.
Remove ALL the wifi SSID connections from you Adaptor & temporarily close the Networking Box. (to make sure the settings are updated.)
Open the Network settings dialogue & re-enter the correct SSID & passphrase.
I hope that helps?
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Same problem yet again max speed and ip profile sl...

I have only just had the issue fixed and it is again here it seems to happen between the 3rd and 5th of each month.
Everything was going good 28th august did speed test my max achievable speed was 7150kbps. My ip profile was 2500kbps. My hub setting for noise was at 3.0db/19.0dB
1st September noticed the speed was not as quick did a speed test max achievable speed was now 2000kbps and my ip profile had gone to 2000kbps and my hub noise was on 12.6dB/18.0db
This morning i got a phone call but nobody there checked my speed after as ive had such calls before and after these have happened it affects my broadband WELL GUESS WHAT
my Max achievable speed is now 500kbps and my ip profile is 500kbps and my hub setting shows my noise at 19.1dB/ 16.0dB So again i cant really use my broadband as it takes so long page to load it times out.
this is happening every month now from march and im getting really fed up with it now it gets fixed yep for a short while but then im back to square one again the beginning of the next month . I would like this issue to be fixed for good.

I have done the quiet line test and i hear nothing the modem is connected straight into my main socket which is the only phone socket i have it does have a built in filter in it.
here are todays hub settings that ive just done
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 15:33:46
Downstream:
800 Kbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
18.8 dB / 16.0 dB
Line attenuation (Down/Up):
57.1 dB / 31.5 dB
Output power (Down/Up):
16.5 dBm / 11.9 dBm
FEC Events (Down/Up):
55099 / 76
CRC Events (Down/Up):
6444 / 76
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
11230 / 16
Error Seconds (Local/Remote):
514 / 79
here are the speed test results ive just carried out at the time of 20.19pm
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
448 Kbps
0 Kbps
500 Kbps
Max Achievable Speed
Download speedachieved during the test was - 448 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :800 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.

My ipod touch screen is cracked from the bottom left corner to the middle button, my button has recently stopped working and i was wondering if this has caused or has another problem occurred, please help me?!ha

any help or suggestions? someone technical??

Doesn't matter if the crack is causing the button to stop working not, that won't be covered under warranty.

Restate my problem - YET AGAIN

I have simply created a loader that loads up a swf. Then that
loaded swf needs a way of removing the content that is first
visible in the new swf. The new swf creates a loader, but it simply
loads over the top of that first lot of content rather than
removing it.
Even though Im specifying an index eg: loadChildAt(1,loader)
it doesnt replace the content sitting there from the previous
loader, just places it over the top etc.
HELP!!

I think there is a misunderstanding of how objects a stacked
in display list.
When you place an object into a certain index (z-position) -
the object that resided in this position is not removed/replaced
but is moved one level up - and all the objects above the new
object are moved one position up. For instance, if you have three
objects (top to bottom):
objC in position 2
objB in 1
objA in 0
and you addChild(objD, 1); - your stack order become:
objC in position 3
objB in 2
objD in 1
objA in 0
An analogy could be slipping a card into a card deck.
There are no gaps in display list stacking order in AS3.
As for the stage nullification - frankly it looks a bit
strange for stage should always present. Try:
while (stage.numChildren > 0) {
stage.removeChildAt(0);

Snow Leopard and HP LaserJet 4mv print problem (yet again)

All
This has been discussed before, I have read all the posts and I cannot get my iMac to print to my trusty Laserjet 4MV now that I am running SL 10.6.4
I have tried:
Downloading the latest release of drivers
Loading the 'optional' packages off the SL DVD
Downloading Gutenprint drivers
Configuring the 4MV for IP connection with 192.0.0.192 as the IP address and 255.255.255.0 as the subnet mask address then using 192.0.0.192 in the printer setup.
I have tried a 'cold restart' of the 4MV which has cleared all my settings and made 0.0.0.0 as the IP address and 0.0.0.0 as the default gateway.
None of these have caused the printer to be seen by the iMac.
Does anyone have any other suggestions?
Many thanks.
Niall

Kappy
You - If you open Network preferences what is the IP address of the Gateway address?
(Configure IPv4 is set to Using DHCP) IP is 192.168.254.100
You- What route are you using to connect to your cable/DSL modem? We have a Speedtouch 510 broadband router supplied by our broadband provider running into a 3Com OfficeSwitch 8 port box and Ethernet (Cat5) cabling out to points around the house.
You- Don't you have the user manual? Yes and its pretty hopeless. The online manual is more extensive but doesn't include a menu map for the MIO menu. I have found a step-through on the web and have now successfully changed the settings on the 4MV (probably to the wrong ones) and done a 'cold reset' back to the factory defaults (0.0.0.0).
I'm getting the impression that its the IP address that I've used that is wrong. I took 192.0.0.192 from the 4MV test menu printout. Should I have used the addressing from the Network Prefs?
Regards and thanks.
Niall

Double up of my document folder If I click on my Documents in finder it then opens another selection of folders including yet another documents folder which if this one is clicked on the folder is repeated yet again this does not appear to be correct help

I believe I have a problem when opening up my documents in finder. where upon I can view all my folders but with yet another Documents folder within this group, if I then click on this second Documents folder yet again a repeat of the do'cs folder appears. I have tried to merge the Documents folders into one but after a morning and a few hours later having completed the merge when I reopened the folders the problem was still there. Help.
Sandra

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I have a MacBook Pro and the batter icon has an "X" in it. I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem. Help?

I have a MacBook Pro and the batter icon has an "X" in it. I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem. Help?

You can try the SMC again.
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself
You can also try a NVRAM/PRAM reset (at the bottom of the same page in the above link
Also hold the OPTION key and click on the Apple logo in the menu bar and click on system information, in the left column select power. Under the battery info see if it is charging (with the power adapter plugged in) as well as the health info (condition should be normal), and battery installrd (should be YES)
If other than these are different you may want to take it in to a Genius bar for a full diagnosis they will do that for dree.
Hope this helps

Installed successfully but network is not connected. Yet when I go on my Mac network is connected. Is there any other way to solve this problem? Please help.

Hi,
I have just installed Windows 7 Home Premium on my Mac book Pro 13inch, it installed successfully but there is no network connection. Yet when I go on my Mac I can get online no problem. Please help or what other way I can do to connect windows online?

Did you download Windows Support Software when you started installing windows via Bootcamp. If yes you need to then install the Support Software after installing windows which contains Windows drivers for Mac hardware.

Another problem... yet again HELP!

Similar Messages

Maybe you are looking for