Another PSE 8 Changing Date Problem

I'm a long-time PSE5 user who has just downloaded the PSE8 trial.
Whenever, I select a photo in the organizer and then go into either full or quick edit, the file properties' date created and date modified are changed to the current date - even if I have not edited or resaved the file. Moreover, if the date of the "unedited" photo had previously been set as unknown ("????"), the date that appears in the organizer is changed to this "revised" (i.e., current) date created/modified.
I can't seem to find a preference that would cause this unwanted change. Is this a (critical) bug in PSE8 or is there a way of avoiding the problem?

Thanks for the response, Barb. My preferences box "Use modified date if EXIF data is not found" was unchecked, so that doesn't solve my problem.
Based on the link you referred me to, it looks as if Adobe introduced this unknown date bug in PSE 6 and still has not (and probably never will) corrected it. Assuming there's no fix, I guess my choices are to convert all my scanned photos to a dummy date, stick with PSE 5 (my knee jerk reaction) until I get a new computer which has Windows 7 (which may or may not be compatible with PSE 5) or find another data management program.
It's too bad because I like the way Organizer handles hierarchical tags, collections and version sets - much better, IMO, than Bridge in Photoshop CS3 which I also have. FWIW, I generally start with the PSE Organizer and use CS3 as my external edititor.

Similar Messages

PSE 8 - Changing Dates - Serious problem

I have been using PSE for many years and have built up a library of almost 14,000 images, which are carefully tagged and dated, however I recently upgraded from PSE7 to PSE8 and, as recommended, I regenerated the thumbnails. I now find that PSE has changed the dates on about 4,000 of my photos and videos to the date of installation of PSE8 or of regeneration of thumbnails. The import date has remained unchanged but the date created and the date modified have both been changed on the file properties. The Exif Date as also been changed and mow matches the PSE Installation date as well.
I am running Windows 7 and first installed the trial version of PSE8 while I waited for the boxed version to come.
Since I am also experiencing some of the other bugs described in this forum, such as duplicated tags and the crashes when using people tagging etc. I am seriously thinking of going back to PSE7 and asking for a refund.
Has anyone else experienced this problem?
I did a backup of the catalog just before upgrading and I assume that I could restore that, and then import all the new pictures since the PSE8 upgrade.
Does anyone have any recommendations for fixing this situation? I suppose I could deinstall PSE8 and PRE8, do a fresh install from the official disks, restore my PSE7 backup and reimport the recent photos. I have to say this sounds like a lot of work though.
Peter

Thanks for the reply, John. After I wrote my post I found your comprehensive listing of resolved and unresolved problems with the PSE Organizer in 7 and 8 and saw that you had already found an unresolved issue with both 7 and 8 changing dates and times.
I have not consciously changed anything at Photoshop.com. I'm only using the on-line backup/synchronization as one form of back up. I also back up to an external hard drive and DVDs. But now that the main files are corrupted, later backups will be corrupted, too.
I did have the advanced option to "Resolve backup/sync conflicts automatically" checked by mistake for awhile and I believe the date problem occurred while I had that option selected. Now that I've de-selected that option, however, the improper dates/times keep regenerating themselves.
This program is a quite disappointing upgrade, all in all. As you note, it is a lot slower in several ways than PSE 7 was. The program size may itself account for that since it is more than three times larger than 7 was. What kind of programmer allows an automatic backup function to override dates and times which the user has specified in response to a dialog box which specifically asks you to specify dates and times? And what kind of programmer hides the selection of file types for backup under "Advanced Backup/sync Options"? Out of the box, PSE 8 has no files selected for backup. The Backup/sync icon indicates that it's operating normally even when nothing at all is being backed up because you haven't clicked on any file types under "Advanced Backup/sync Options.
I saw someone asking about other organizer programs for electronic photos and other files. One which was not mentioned, which has a basically bulletproof organizer function, is Creative Memories Memory Manager 3 for about $40. Editing features are quite limited, but functional with no glitches. Organizing is the main thing here; editing is secondary, as you'd expect from a program aimed primarily at the digital scrapbooking market. The entire program is very easy to learn and use and backups work without a hitch. You could always edit in PSE and then use another program like Memory Manager 3 to organize your files as long as you don't save the edited files as .psd files. See: http://www.creativememories.com/MainMenu/Our-products-and-services/Digital-Scrapbooking/Me mory-Manager%c2%ae The reason my wife and I moved to PSE from Memory Manager was the more sophisticated editing functions available in PSE, but by comparison PSE's Organizer is second rate, to be kind.
>>> "John R. Ellis" <[email protected]> 12/29/2009 10:39 PM >>>
Interesting, this is another symptom of a known bug: Photoshop.com doesn't handle unknown month, day, or time fields. (This is ironic, given that Adobe has been pushing a revision to its XMP standard specifically for handling unknown date/time fields.) See this post for other issues wth Photoshop.com:
http://forums.adobe.com/message/2306550#2306550
After you first sync with Photoshop.com, you can see that the thumbnails on Photoshop.com have incorrect date/times. But for me to reproduce your bug, I need to then change the tags or captions of the thumbnails on Photoshop.com. Then when I sync again, the incorrect date/times get copied back into the PSE catalog. If I don't add a tag or caption on Photoshop.com, the incorrect date/times don't get copied back.
Are you making any changes to the tags or captions of the photos on Photoshop.com?

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

Approaches to transfer changed data from a table to another table

Hello expert,
will you please show me all approaches to automatically detect and transfer changed data from a table to another table ? I don't need detail information, but a little comment for those approaches are more welcome.
Many Thanks,
Edited by: 843178 on 19-Dec-2011 2:04 PM

You will want to review information on replication and similar methods
In a nutshell:
Replication allowed data to exist at more than one site and take the Master / original table data and clone it at a different site
As tranporting all of the table data to a remote / clone site got more and more expensive we developed a method
to identify just the 'diffs' and only send those from the master to the clone which needed only the diffs to become a clone of the master table
This has many methods and options, but looking under key words such as
- distributed transations
- materialized views
- replication
... are a few categories that will get you started

Anyone have a problem using iPhoto "change date of photo" function?

I imported some old photos today and need to sent the time on them. I selected the photos and used the "Change date of photo" function. It worked fine on the first set. I tried adjust a second set and that's where problem began. I needed to change the date from 01-01-2002 to the correct date of 05-28-2004. I photo instead set the date to somewhere in 1989. I thought I must have typed the date wrong. So I selected the photos and tried again. Nope, it wasn't me. The date on the photos was set back to some time in 1983. I tried several more time... Well, lets just say I have photos dated in the 1700's..

I had searched the forum and could not find anything. Maybe someone knows where is is.
I fixed the photos the "brute force" way.
I deleted them from the library.
Changed the date on the files on a different computer and imported them again.
However this seam like a crap way to fix a iPhoto issue.
I hope that I don't need to fix the time on any more photos..
Clarence.

PSE 10 organizer changing date times of photos

I have been having an issue since PSE9 which continues into PSE 10 organizer. After scaning photos and saving into organizer it will not allow assingment of jsut a year or a year month. If I take an old family photo and change date (scanned date) to year 1930 with unknown month it appears to take. Nect I time go into organizer it has changed the date to 12/31/1929. When I assign year and month with no date it will assing a day. PSE 10 also changes time of raw photos, keeps correct year, month, and day but changes time to the time file imported. If I correct the time it appears to take but it reverts back. This has become a major issue as I have over 16K of pictures and have scanned in thousands of old family photos, reasearching dates to use, it is extremetly frustarating to have a program that changes these settings.

hog_2002 a écrit:
PSE 10 organizer now displays SAMSUNG CAMERA PICTURES as the title for every imported image. This is very annoying. How to I prevent PSE from assigning this attribute to the title metadata upon import? I have thousands of photos, and going through each one to delete the title isn't really an option. Has anyone encountered this type of behavoir?
Windows 7 pro, if that matters.
Thanks,
--Hoggie
It's an old behaviour from some camera manufacturers (also Olympus...) which write their brand name in the exif field reserved to captions:
Photoshop Elements 6/7/8 Frequently Asked Questions (FAQ)

Problem with Changing Data while Import through Excel Sheet

Hi Experts,
I am new to SAP LUMIRA and I am facing an issue with it. Actually, I am importing the data for analysis from an Excel sheet into SAP LUMIRA. I am able to prepare the visualization in the first go. But If I am changing the number of columns in the excel sheet afterwards (that may occur in normal circumstances where data is dynamic) and then refreshing the LUMIRA dashboard, it fails. Please can you tell me about a possible mistake or is it really feasible when we change data afterwards and then refresh the dashboards once again.
Looking forward to your answers.
Regards,
Aman

What is the error message?
Can you confirm you are using 1.15.1?

Change data capture problem?

Hii,
i am getting the following error when trying to execute the following procedure.
SQL>execute dbms_cdc_subscribe.create_subscription(-
change_set_name => 'SYNC_SET',-
description => 'This subscription is used for testing',-
subscription_name => 'TEST_SUBSCRIPTION');
ERROR at line 1:
ORA-06550: line 1, column 26:
PLS-00302: component 'CREATE_SUBSCRIPTION' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
I am trying to implement oracle change data capture in my DB.
DB version:9.2.0.6
Can any one help me to sort out this issue please.

If this package is exists DBMS_CDC_SUBSCRIBE then that Version will support this feature thats my understand.
This is successfully worked on our DB. Please check syntax like which may have space or anything...
Replace with your parameters and run, use notepad.
BEGIN
DBMS_CDC_SUBSCRIBE.CREATE_SUBSCRIPTION(
change_set_name => 'PROD1DB_CHANGES',
description => 'CDC for Cust',
subscription_name => 'PROD1DB_SUB');
END;
/

Can you help me about change data captures in 10.2.0.3

Hi,
I made research about Change Data Capture and I try to implement it between two databases for two small tables in 10g release 2.MY CDC implementation uses archive logs to replicate data.
Change Data Capture Mode Asynchronous autolog archive mode..It works correctly( except for ddl).Now I have some questions about CDC implementation for large tables.
I have one senario to implement but I do not find exactly how can I do it correctly.
I have one table (name test) that consists of 100 000 000 rows , everyday 1 000 000 transections occurs on this table and I archive the old
data more than one year manually.This table is in the source db.I want to replicate this table by using Change Data Capture to other stage database.
There are some questions about my senario in the following.
1.How can I make the first load operations? (test table has 100 000 000 rows in the source db)
2.In CDC, it uses change table (name test_ch) it consists of extra rows related to opearations for stage table.But, I need the orjinal table (name test) for applicaton works in stage database.How can I move the data from change table (test_ch) to orjinal table (name test) in stage database? (I don't prefer to use view for test table)
3.How can I remove some data from change table(name test_ch) in stage db?It cause problem or not?
4.There is a way to replicate ddl operations between two database?
5. How can I find the last applied log on stage db in CDC?How can I find archive gap between source db and stage db?
6.How can I make the maintanence of change tables in stage db?

Asynchronous CDC uses Streams to generate the change records. Basically, it is a pre-packaged DML Handler that converts the changes into inserts into the change table. You indicated that you want the changes to be written to the original table, which is the default behavior of Streams replication. That is why I recommended that you use Streams directly.

Yes, it is possible to capture changes from a production redo/archive log at another database. This capability is called "downstream" capture in the Streams manuals. You can configure this capability using the MAINTAIN_* procedures in DBMS_STREAMS_ADM package (where * is one of TABLES, SCHEMAS, or GLOBAL depending on the granularity of change capture).

A couple of tips for using these procedures for downstream capture:
 1) Don't forget to set up log shipping to the downstream capture database. Log shipping is setup exactly the same way for Streams as for Data Guard. Instructions can be found in the Streams Replication Administrator's Guide. This configuration has probably already been done as part of your initial CDC setup.
 2) Run the command at the database that will perform the downstream capture. This database can also be the destination (or target) database where the changes are to be applied.
 3) Explicitly define the parameters capture_queue_name and apply_queue_name to be the same queue name. Example:
 capture_queue_name=>'STRMADMIN.STREAMS_QUEUE'
 apply_queue_name=>'STRMADMIN.STREAMS_QUEUE'

Change Data Capture How to Tell which you are running Sync or Asyn

Hi ,
I am taking over a new system that has change data capture running, but Im really confused how this is running. Most of the CDC is set up using Sync(triggers), but I have about 5 tables that DO NOT have system generated triggers on them. I know Streams is NOT running/configured. I know Capture is not running/configured (because nothing in DBA_CAPTURE table). I can tell that these 5 tables are still getting updated in the change table schema. I can not figure out how the 5 tables that DO NOT have triggers on them are updating the change data set tables.
I had thought the the 5 tables, must be configured with HOTLOG, but when I look at the CHANGE_SETS table they all (including these 5 tables) are set to CHANGE SOURCE NAME = SYNC SOUCE. I would expected that to be HOTLOG_SOURCE. So I "assume" they aren't set up using Asnc. hot log mode. So maybe the other Async modes are used, but not pushed to another database? Is that possible?
Any other ideas on how to figure out how the CDC is set up for these 5 tables?
thanks for your help.

Thanks for the reply, but I think I must have not stated the problem clearly. I dont WANT to set the source I want to figure out how this CDC is working. I see ALL the sources are currently set to SYNC_SOURCE. Almost all of the tables are set up with system triggers on them, but 5 dont have system triggers, yet the source says SYNC_SOURCE. I did validate that the change tables are getting updated for these tables. my question is how are they getting updated? I "assume" since they dont have system triggers ont eh table they aren't synchoronus cdc (like the other tables are). yet the source says SYNC_SOURCE. What am I missing? How can I tell if the redo log is populating those changes tables? Im pretty sure it is (Becuase there aren't triggers or jobs running), but Im curious if there is a way to tell for sure.
Thanks,

Changing data in previous element of ArrayList

I'm iterating through an array list which contains several data elements in each array, one of which is an account numbers which are sorted. If an account number is duplicated, I want to change data in both entries in the ArrayList.
for (ListIterator iter = myList.listIterator(); iter.hasNext();)
                  MyList vantageList = (MyList) iter.next();
      if ( iter.hasPrevious)
         MyList previousElement = (MyList)iter.previous();
          previousElement.setAccountNumber(12345);
      if (imageLitr.hasNext)
         MyList nextElement = (MyList)imageLitr.next();
        nextElement.setAccountNumber(12345);
}but the previousElement is not being updated with 12345, and I'm not sure why.
thanks
Edited by: drakester on Oct 10, 2007 11:53 AM

drakester wrote:
This is the code I have and it's not updating the previous element in the list with "D" and I have no idea why?That code looks correct enough. There are a couple things you're doing which are unnecessary: You don't need to check for a null previousAccountNumber - assuming accountNumber isn't null (which it isn't or you'd have another problem), a non-null string is never equal to a null one. And there's no need to check for iter.hasPrevious nor hasNext, because if you have found a duplicate, obviously there is a previous item, it's the duplicate one you already saw. So you move to that item and mark it. Then obviously there's a next item too, because you just moved back one item and need to move forward again to the current item you were just working on.
Anyway, it looks like it should work, so I'd have to guess that:
1) You're not actually executing this code
2) The list isn't sorted when you execute this code
3) You're seeing the problem because of something else - not looking at this updated list, or something else updated it after this code executed and you're seeing the effects of that update, not this one.
4) setToD doesn't do anything
5) Something else

Pdf form for data from another form with data, xml or pdf, tables not expanding

Sir,
I am using Adobe Acrobat 9 Pro and LifeCylce to do these forms. I have made several subforms for a Risk Assessment for the mission they fly. I have also made up another form with tables that would connect with each subform data. This form also will give me and others a % of the values received from the data to help us with seeing problem area towards Safety.
I am able to connect the data to the form from the Risk Forms but when I go and add another group of data it over writes the data that was already in the data collection form. The tables are dynamic and able to expand with the generated data but when I compile several Risk Forms, xml. data into one single data group, the receiving tables will not except this data. To compile the data I am in Acrobat and using the form-manage form data-merge data to spreadsheet than enter as a report that is xml. Still not working. I also tried to save the form, with data already in the tables, and then opened it again and add data to it, it will over write the existing data in the form. This form does work great with the generated data in LiveCycle.
Any suggestions???

Thanks Paul
Did as you said and for each subform binding tab made sure I have "Repeat subform for each data item" checkbox and still no change when I add the data.
I even tried to combine the xml data and that file just has the main page and not the data pages. just another problem that is happening.
Any other suggestions on this expanding tables and receive single forms one at a time.
Bill

Using Change Data Capture in SSIS - how to handle schema changes

I was asked to consider change data capture for a database recently. I can see that from the database perspective, its quite nice. When I considered how I'd do this in SSIS, it seemed pretty obvious that I might have a problem, but I wanted to
confirm here.
The database in question changes the schema about once per month in production. We have a lot of controls in our environment, so everytime a tables schema is changed, I'd have to do a formal change request to deal with a change to my code
base, in this case my SSIS package; it can be a lot of work. If I wanted to track the data changes for inserts, update and deletes using an SSIS package to send the data changes to the destination tables, would I have to change my SSIS package
with every schema change, or is there a way to keep the exact same SSIS package with CDC without having to change it every month?
Thanks,
Keith

Hi Keith,
What is your exact requirement?
If you want to capture the object_created, object_deleted or object_altered informations, you can try using
Extended events .
As mentioned in your OP:
"If I wanted to track the data changes for inserts, update and deletes using an SSIS package to send the data changes to the destination tables, would I have to change my SSIS package with
every schema change, or is there a way to keep the exact same SSIS package with CDC without having to change it every month?"
If you want the databases in two different environments to be in sync, then take periodic
backup and apply(restore) on the another destination DB.
(or)
you can also try with
SQL Server replication if it is really needed.
As I understand from your description, if you want the table data & schema to be in sync in two different database:
then create job [script that will drop the destination DB table & create the copy of source DB table ] as per your requirement:
--CREATE DATABASE db1
--CREATE DATABASE db2
USE db1
GO
CREATE TABLE tbl(Id INT)
USE db2
GO
IF EXISTS (SELECT * FROM SYS.OBJECTS WHERE name = 'tb1' and TYPE = 'u')
DROP TABLE dbo.tb1
SELECT * INTO db2.dbo.tb1 FROM db1.dbo.tbl
SELECT * FROM dbo.tb1
--DROP DATABASE db1,db2
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Using Changed Data

Hi,
I implemented CDC without error and started the journal.
My table name to be journalized: DWH_SEC_TYPES
In the J$DWH_SEC_TYPES table and JV$DDWH_SEC_TYPES
view, the changed data can be viewed. Also there is another view named JV$DWH_SEC_TYPES which doesnt involve any data.
When i execute my interface that is using the journalized table, the LKM is trying to load data from JV$DWH_SEC_TYPES view which means no data avaliable. If JV$DDWH_SEC_TYPES is used to pull data,there will be no problem. How can we manage it?
LKM : LKM SQL to Oracle
Tnks in advnce
select
 DWH_SEC_TYPES.SEC_TYPE_OID C1_SEC_TYPE_OID,
 DWH_SEC_TYPES.SEC_TYPE_CODE C2_SEC_TYPE_CODE,
 DWH_SEC_TYPES.SEC_TYPE_DESC C3_SEC_TYPE_DESC,
 DWH_SEC_TYPES.RECORD_STATUS C4_RECORD_STATUS,
 DWH_SEC_TYPES.CREATION_DATE C5_CREATION_DATE,
 DWH_SEC_TYPES.LAST_CHANGE_DATE C6_LAST_CHANGE_DATE,
 DWH_SEC_TYPES.USER_CREATED C7_USER_CREATED,
 DWH_SEC_TYPES.SEC_CLASS_OID C8_SEC_CLASS_OID,
 JRN_SUBSCRIBER JRN_SUBSCRIBER,
 JRN_FLAG JRN_FLAG,
 JRN_DATE JRN_DATE
from ODI_WORK.JV$DWH_SEC_TYPES DWH_SEC_TYPES
where (1=1)
AND JRN_SUBSCRIBER = 'SBSC_VERA_KIYMET' /* AND JRN_DATE < sysdate */

Thanks for answer Bouch,
The steps i carried out;
Purge Journal-->insert new record-->extend window--->execute interface
However i still encounter the same problem.
I m using consistent JKM named "JKM Oracle 10g Consistent (LOGMINER)".
I can see the journal data when i click the journal data from the model.
Might be something to do with LKM?

Pie Chart changing data provider ?

Iv created a pie chart to which the dataprovider is often going to change , the problem is how can i draw the pie chart when the datprovider changes as currently the chart is drawn when the dataprovider hasnt been set and thereforee nothing is displayed?
Thanks Chris

<fx:Script>
 <![CDATA[
 import mx.rpc.events.ResultEvent;
 import mx.collections.XMLListCollection;
 import mx.events.ListEvent;
 import mx.controls.Alert;
 [Bindable]
 public var stats_list:XMLList;
 [Bindable]
 public var stats_list_collection:XMLListCollection;
 //Handler for stats list xml.
 public function stats_result(event:ResultEvent):void
 stats_list=event.result.stats
 stats_list_collection=new XMLListCollection(stats_list);
 ]]>
 </fx:Script>
<mx:PieChart id="piechart" dataProvider="{stats_list_collection}" showDataTips="true" color="#000000" name="Dynamic Pie Chart" right="0" left="0" top="40" bottom="10">
 <mx:series>
 <mx:PieSeries explodeRadius=".1" labelPosition="callout" displayName="Series 1" field="value" nameField="type" fills="{[sc1, sc2, sc3, sc4]}"/>
 </mx:series>
</mx:PieChart>
Chris,
I posted some information above that might be of some use to you. Note that my PieChart dataProvider is: stats_list_collection
When the function "stats_result" is triggered it changes the data for the PieChart and I reset the value of stats_list_collection. When that happens it changes the PieChart to contain the new values from your XMLListCollection. Basically the way this application was setup is to have a dropdown that a user selects and option from and it populates the data in the PieChart depending on their selection.
Another way of doing this (if you don't want to just update the dataProvider's content) is:
<fx:Script>
 <![CDATA[
 //pseudo code
 var dataprovider1:SOMETYPE = SOMETHING;
 var dataprovider2:SOMETYPE = SOMETHING;
 var dataprovider3:SOMETYPE = SOMETHING;
 public function WHATEVER YOU WANT THE TRIGGER TO BE(event:ResultEvent):void
 switch(SOME CONDITION)
 case "case 1": piechart.dataProvider = dataprovider1;
 break;
 case "case 2": piechart.dataProvider = dataprovider2;
 break;
 case "case 3": piechart.dataProvider = dataprovider3;
 break;
 ]]>
 </fx:Script>
<mx:PieChart id="piechart">
 <mx:series>
 <mx:PieSeries explodeRadius=".1" labelPosition="callout" displayName="Series 1" field="value" nameField="type" fills="{[sc1, sc2, sc3, sc4]}"/>
 </mx:series>
</mx:PieChart>
Hope this helps. The secondary option I posted was mostly pseduo code but the idea should give you a starting point.

Another PSE 8 Changing Date Problem

Similar Messages

Maybe you are looking for