Another Publishing Problem

Using Contribute 3.1
When I went to Publish my Page, I get an Error Message saying
" Access to C:/Documments and Settings/Application
data/Contribute3/MCF180tmp was Denied".
Then, I think I tried to Publish it again, and got this
second Error Mssg "Either the network is unavailable, or you don't
have permission to publish in this area".
I think then I Saved it for later. Now when I'm at the page
it's linked to, I see that mssg saying "You have an Unpublished
Draft of this page", but my problem is, when I click on that
Message (to hopefully go to my Edited Page and Publish it) I get a
blank white screen.
I've posted three screenshots of the Error Messages here ..
http://s11.photobucket.com/albums/a173/JoeWood_/contrib/?
OK folks, I sure hope someone has an answer for me .. need to
get this info published!

OK, I went back in after a few days, went to that White Page,
and hit Cancel.
Fixed my problem.
Sure would be nice if someone from Adobe or wahatever would
monitor these forums, and give us users a little help!

Similar Messages

Another user with publishing problems -- proof that it is .Mac related

Just before Christmas I started getting the dreaded "Publish Error: There was an error updating .Mac" message every time I published. I read all the previous posts, even the ones dating back to October. I think I can conclusively show that the problem is on the .Mac backend, and not at all on my computer. Here is what I did: first, I created a temporary .Mac account; second, I moved my Domain file for safe keeping and did not replace it; third, I logged into the Guest User account that is now available in Leopard. I then attempted to publish a single page website from iWeb from both my normal login and the guest login to both my normal .mac account and the temporary one. (To switch between .Mac accounts I used the system preferences panel when iWeb was not running). The results are as follows:
.......................Regular .Mac.......Temporary .Mac
Normal Login..Publish Failed......Publish Succeeded
Guest Login.....Publish Failed......Publish Succeeded
This tells me that there is no problem on my computer, or with my network connection, and the problem is squarely on the .Mac side of things.
I sent this message off to the standard help page, and got the standard form letter back. In reply I asked them to reset my .Mac account so it would appear "new". I'll see what they say.
It would be interesting to see how many other people with "publish" problems can repeat this test.
-=[doug]=-

I've done what appears to be the standard littany of things:
1) Confirmed that I am running the latest version of iWeb (2.02) on 10.5.1 (although the problem persists when using my backup of 10.4.10 that includes the ilife update)
2) Changed my .Mac password, even though it was less than 20 characters
3) Published all of my previous website to the temp .mac (in chunks to avoid the space limitations)
4) Successfully published my site to a folder
5) Successfully uploaded that folder to my iDisk
6) Attempted to republish and republish all multiple times
7) Deleted iWeb's plist
8) rebooted
9) logged out and back into my .Mac account
10) confirmed that there is no password protection on my site
11) confirmed that there are no comments on my site
12) deleted assets.[membername].plist from the Domain file
13) Confirmed that my password in Keychain is correct
14) Run Keychain First Aid
15) deleted Sites.RSS from my iDisk
16) deleted the website and index.html from the iDisk
So, I have done a fair amount of ground work here, and am not just spouting off against Apple/.Mac. However, I still claim that the fact that I can successfully publish to a temporary .Mac account while the exact same iWeb content fails when being published to my normal .Mac account implies that there is something wrong with my .Mac account -- it is almost as if Apple is trying to eliminate its paying customers (since there are no problems with the free account).
-=[doug]=-

Publishing Problems - a Solution?

For a long time I'd sympathised with all you people who'd been having publishing nightmares, even though I've been updating pretty much error free since iWeb 1.0
Then last night after updating my blogs and making a few changes, I finally got the dreaded error messages. Tried a few times, got frustrated, and decided to sleep on it.
Same this morning ... grrr ... but then I noticed that my iDisk had failed on auto-synchronisation.
I'd only mounted my iDisk recently to amend my Podcast feed, so on a hunch I unmounted iDisk, rehit the Publish button in iWeb, and holy shmoly – it worked straight off!
I reckon that publishing iWeb kicks off the iDisk auto-sync, and then you've got a conflict with iDisk and .Mac trying to outsync each other.
Anybody else found this? if this solves publishing problems for a few of you then great. If it works for a lot of you, even better. If the majority of you get sorted, then that's a revelation!
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.6)

My message to Apple stated:
"My pages go through the "create" process then start
on the "publishing" process then come back with an
error message that tells me to check my internet
connection (which is fine at 2 different locations. I
spent 13 hours fighting this yesterday. It has
created a major problem for me -- and this just after
I paid an extra hundred dollars to upgrade my
broadband. Your telephone people tell me you're
working on this. Please advise when it will be fixed
so I don't waste another 13 hours today."
Regards,
Richard M.
Richard, thank you for writing this. I would like to know how this all shakes out, and I am glad that it is an Apple server problem and not mine.
Meanwhile, I want to say how helpful it is to have this iWeb forum, and also thank the very generous and thoughtful souls who take the time to help beyond what normally would be expected. Those people know who they are, but I also am grateful to everyone.
For example, I was greatly relieved to read that I was not the only person getting Network Failure messages, since it meant that probably I was not working with a defective application -- one that started out fine but somehow went south on me and would not be replaced by Apple. This may seem a trifling thing to some, but when you are in a spot that you perceive as Hot, assurance from the outside is very much appreciated.
I hope that when you all finish your websites, you post the URL so we can all see it; after all, in a sense we are all comrades in arms (because sometimes it can seem like a war, due to the Fear Factor) and our fates are somehow connected even though we are all so-called strangers.
— Lorna in Southern California

Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

Hi Goutham,
I am facing the same issue. Please let me know how you have resolved it.

Unexpected Publishing Problems

I have been using iWeb for almost two months with no publishing problems. I publish to a folder then ftp it to my yahoo server. However, last night I began to experience publishing problems. iWeb publishes just the first five pages of my site then I get a message that an unexpected error occurred. No other clues as to why it could be happening.
The last change I made was an adding a podcast. I deleted that podcast thinking that maybe iWeb didn't like the taste of it and tried to publish but it still won't work. I've tried about 10 times, with my screen saver turned off, battery charger plugged in, and no other apps running.
Please help me!
Ruben
G4 17 inch Powerbook Mac OS X (10.4.5)

Here's the latest...
I realized that iWeb stopped publishing at the same page (I have 30+ pages on my site. It would always stop at the fifth one). So, I rearranged the order of that page, dragging it down to the very bottom of my site list. When I went to publish to folder, iWeb published everything then stopped again at that specific page. So here I thought I had isolated the issue.
I created a new site and dragged the problematic page into it. I then created a brand new page in my main site and copy/pasted the old content into it. Ergo: a whole new page. I went to publish with iWeb cranking along nicely until it got to the NEW version of that page and then it crapped out. Again.
I am guessing that one of the images (or who knows what, really) is messing with iWeb's fragile ego. I am going to reconstruct the page with brand new copies of the images that were on it. Images, by the way, that published fine for almost a month and that I didn't alter at all.
Wish me luck all. I'll keep you posted.
Ruben

Publish Problems

More Publish Problems!
Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what? This worked before using 1.1.1
Sometimes it works and most of the time it will not publish? What can I do?
Thanks
David
imac G5 and an older G5 + a Powerbook and an iBook Mac OS X (10.4.7)

Oh my god I am not a lunatic idiot after all!
I am currently in discussion with Apple Support for exactly the same problems as you guys, all I did was add a new video to my site. The first few times the update timed out as it was taking more than 30 minutes to upload (I am on broadband and the new page was only 7 meg). Then I got the ".Mac servers were busy please try later" message, then I got the "check your isp.." gubbins. Then when I tried again it said the update was successful but when I visited the site (via a number of different computers and networks) I either could not access the site at all, or it partly loaded, or the welcome page loaded correctly but when going to other pages I got nothing!
I am currently waiting for Apple Support to " get back to me"
MacBook 1.1 White 1.83ghz iBook 12 iBook 14 Mac OS X (10.4.7) Remember, A good friend will bail you out of jail, but a best friend will help you bury the body!

YAPP (Yet Another Printing Problem)

I've found another printing problem - this time with colour printing.
To my
surprise, Forte (3.0.E.0) can print in colour (at least on a HP 690C,
using
NT drivers for the 660C, the printer being connected to a Win95
machine).
I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?
Is this another of the 'Printing works fine as long as it happens
non-locally?'
features?
Thanks
Jamie Anstice
Programmer/Analyst, University of Canterbury
New Zealand

I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?Hi Jamie,
I wonder if this is related to the printing feature I discovered
where things I print from Forte have a strong tendency to come out in
the same colours as my windows desktop, which is
typically yellow-on-black.
- Ed
================================================================================
Eduard E Havelaar, Information Services Section, University of Canterbury
email: [email protected]
phone: +64-3-366 7001 extn 8910
fax: +64-3-364 2999
snailmail: Private Bag 4800, Christchurch, New Zealand

App-V 5.0 SP2 and Office 2013 Publishing Problem

Hi
I have a big problem with app-v 5.0 and Office 2013, the thing is that I have published it globally to a RDS servers in my farm and I have 4 different configuration xml's to publsih the package. I'm also using app-locker to prevent the users that are not supposed
to have the package doesn't get it published. That is working fine.
The default configuration xml is to publish the package to the computer with Excel, Word, Outlook, Powerpoint, onenote and Publisher and create shortcuts to All Programs.
I have 1 user configuration xml to a group (group 1) that has the default configuration but including 3 shortcuts to the desktop, Excel, Word and Outlook. I have another user configuration xml to group 2 that has all the application and all the shortcuts in
Office 2013 Pro and 4 shortcuts to the desktop. I have 1 user configuration xml for Excel only and another one for Word only.
This has been working well for 2-3 days but now users are getting error "The application failed to launch. The application belongs to a packages or a connection group that is scheduled to be unpublished. Error code: 0xA7E0E502-00000516".
And the Office 2013 is pending to unpublish globally on all servers even though no one has done anything except log in or log out.
What am I doing wrong, there are no connection groups on the app-v server but there where 2 or 3 long time ago and have been deleted.
Kind Regards
Kristján R. Halldórsson
Best Regards Kristjan R. Halldorsson

I ran the get-appvclientconnectiongroup -all on my servers and there where none listed.
I have also enabled the Virtualization Subsystem debuglog on the client and I'm not finding any error that might relate to this problem.
The thing is I had a group policy enabled that said Enable Global Refresh on Logon = true but I changed that to false and published the package again globally and I'm just waiting now to see if the package goes to unpublish state as it did before.
Best Regards Kristjan R. Halldorsson

FMS Publish Problem

Good Night partners.
Today I'm here to bug you a little, because I'm having a
problem with my flex app for FMS 3.5
Thing is my app has two video displays, one shows the video
input for the camera, and the other shows the live stream of the
video being published.
Locally on my computer, I can use both this lines:
ns.publish("livevideo", "live");
ns.publish("videos/redorded", "record");
The first one, as you know, sends the video to the NetStream
Object, so viewers can watch it live, and the second line is for
recording the video on the FMS app folder.
Locally, again, everything works perfect, but if i change the
adress
http://127.0.0.1/stream_app/stream_app.html
to
http://192.168.1.4/stream_app/stream_app.html
and access it from another network pc, I get this error:
Error #2044: Unhandled NetStatusEvent:. level=error,
code=NetStream.Record.NoAccess
at
trans/netStatusHandler()[C:\xampp\htdocs\stream_app\src\stream_app.mxml:119]
As far as I know, this error occurs when the file that I'm
trying to overwrite it's on use or server's hard disk is full.
I hope I was clear enough explaining my problem, and I also
hope someone can help me.
Thanks in advance, Juan.

I discover that publish function does not work only with
Flash Player 9. When i have older version, all is OK, but with
version 9 does not work. My FMS version is 2.0.4.
Any suggestions ???

Tibetan Language publishing problem

Hi,
I meet a problem.
I'm in China. We created some E-learning modules using PowerPoint, initially in simplified Chinese language. We published them either locally (to the local computer) or to the Connect Pro server, the final published document displayed without problems.
Now, the original PPT module files had been translated to Tibetan language (see the 1st picture in the below).
I try to publish those Tibetan modules to my own computer recently. However, after the publishing process, the index.htm (the window that should display) did not show the contents as I expected. I just see the Adobe Presenter icon on that page, seems it is trying to display, but in the initial loading process endlessly (see the 2nd picture in the below).
I tried several modules, only the first one of them works but others go to the problem I mentioned above.
I used Presenter 8 to publish the PPT files.
I Emailed a previous colleague of me, who is a very clever Yankee. He replied the font (Tibetan) may not be supported by presenter. But I'm bewildered - why I published the 1st Tibetan language module, and successfully see the results? Did I just accidentally succeed?
Here is the last message he sent to me:
Yes, the font might only present a problem for certain characters, I think presenter 7 would probably be worse in this regard (but who knows?), I don't have PowerPoint or presenter on my computer and so can't actively diagnose, sorry =( I'm sure you can get a handle on it though - try looking at your browser's JavaScript console when it tries to load, it might give you some hints!
By default, when I chose "view output after publishing", Internet Explorer would be used as the showing screen. And I may not have the intention to change into another browser. He mentions the JavaScript setting of the browser, I'm still not sure what he pointed to.
Can anyone tell me how to display published Tibetan PowerPoints? Or, Tibetan language is not supported by Presenter indeed?
Thank you

I tried to delete some slides and publish the PPT, I find the cause is focused on some slides from 11-14. (I've tried to delete some slides from the beginning, the publishing results were all fail)
In the process of deleting some slides from the PPT, voice files may be deleted automatically by the Presenter itself, but I don't think it was the voice file that created this problem.
Delete and publish            Publishing results
s11                                        Fail
s11, s12                                 Fail
s11, s12, s13                          Fail
s11, s12, s13, s14                 Success
s14                                        Fail
S13, s14                                Fail
s12, s13, s14                         Fail
s11, s13, s14                        Success
s11, s13                                Fail
s11, s14                                Fail
There are 15 slides of this module in total. I have included the pictures of s11, s13, s14 here.
Would you like to diagnose this issue, if I send this module presentation to you via Email? Could you leave an Email address or message your Email address to me?
And, after I identified those slides that may causing this problem, I found them (s11, s13, s14 see the list above) maybe not necessary for local publication, since we do not intend to publish those modules to a Connect server and collect answering statistics. So the option for us is to delete those three slides and do the local publication.
But if you have interest, I would send you the presentation file, and you can take a look.
s11:
S13:
S14:

Publishing problems for CS4 on Leopard

I upgraded to Contribute CS4 on Mac OSX Leopard. I seem to be stuck in a loop that prevents me from publishing. I can pull the page up and edit it, but then when I try to publish, I get this message - "You can’t perform this action on this draft. The draft is invalid because a lock has been broken and another instance might have already acted on the draft. Contribute will remove this invalid draft from your machine." So, if I hit "OK" for this, then it brings the unedited page back up, and there is a note at the top stating that I have an unpublished draft. If I then click on the "unpublished draft" part of this message, it brings up a blank page, which I can get rid of by clicking "Discard draft". This takes me back to the page I started with (unedited), where I can click "Edit page" and start the whole loop over again.

I have the same problem for my client's MacBook Pro (running a French Mac OS X version of Leopard). My own laptop (running US Mac OS X Leopard) does not seem to have any problems (tested on two other machines running US-based OS, which seemed fine).
Has anyone an idea of how to swipe clean a Contribute CS 4 Installation (Preferences, Application Support, etc.) using a software or script other than Clean Script for Contribute CS 4? (I tried it out already, but did not seem to help). I think it may be linked to hidden files that are kept in some preference-like folders and when I proceed to reinstall the software, the 'bug' remains. Strangely, relaunching Contribute after a clean reinstall, I realized that my connection is already configured, which shouldn't be the case if I started from scratch again, correct?
Any help is greatly appreciated!!!
Thanks,
Arnaud

Many FTP publishing problems. Have you tried this??

I run many websites with different webhosts. I was sooo happy with the new FTP feature untill I tried to get it to work. Test worked, upload didn't. Test worked, publishing worked, nothing showed up on actual website. test worked, publishing worked, it showed up on site, but if I added another change it didn't work etc etc etc....... All my problems were solved when I called the hosts, asked them where to publish the site and fill that in in the Directory/Path bar. I use public for Telus (in Canada). But I use WWW for 4goodhosting. So every host has a different folder (I think). Everything is working now!!! I don't know a lot about all this stuff, but all my problems are solved and for the first time in 4 days I am happy with iWeb again!!

This is not so. Lots of people here host business sites and choose to host these on an external server because it provides faster loading times and extra features and if you use a dedicated ftp programme such as Cyberduck and you upload all the correct files, then there should be no problem at all.
Publishing to MobileMe and forwarding is one option, but at times loading times are slower, as I discovered myself and I have had no problem at all using Cyberduck to upload all my files. My sites looks just the same as it did on MME.

Image publishing problem

people, help.
I have a site published and running thru iWeb. www.bingsti.ru
It was working alright, but since yesterday it started to mess with images.
All images are small jpg files.
When after making some changes, such as adding text, I upload the site, some images just dissapear.
The image in header never dissapears, but images on the page, they just come and go, without any logic.
The same image used on two pages can be succesfully uploaded at one page and give an error on another.
The error message is that "that there is a problem with the FTP server", but I checked the site folder on FTP and all images are in the folder.
The images are on the server, in the folder, but still iWeb shows the FTP error and refuses to upload jpg images.
Yes, I tried png images. didn't help.
Any ideas

Publish your site to a folder on your hard drive and open it locally. Check to see if all photos are displaying as they should. If they are then the issue lies in the uploading of the files.
If that's the case you can try using a 3rd party FTP client like the free Cyberduck to upload your site files to the server. Then see if the online site works.
Many user have found that the build in iWeb ftp client would fail and using CD fixed the problem.
OT

Major publishing problems!!! Buy stock in Kleenex!

I searched and couldn't find-- sorry if it's already here somewhere. Been struggling for HOURS to publish our iWeb website (for 1st time) for all to see. Am ready to bawl. I thought t his was supposed to be easier than FrontPage.....
Ok, I used Filezilla and only bits and pieces get uploaded-- missing the links as well as some of the frames. On the pages that DID load, the links are still missing and the top picture and text are overlapped ( I pulled the links box over to the side - didn't like it at the top. I tried having it back at the top & republished and they still don't show up) OFTEN get a "Application Quit Unexpectedly" message which knocks me off Filezilla completely so I have to reopen. Our index page has nothing now but background color (we used Layered Paper) with text. SOOO I am trying Cyberduck-- can't figure out what to put in the blanks and our hosting service folks didn't know either. Was on the phone with them multiple times today for long periods and they can't help me-- they say "maybe it's your code". Well, I didn't do anything with iWeb's code since I can't even access it (I'd like to add metatags that worked great with our FrontPage site... another sad story).
Anyway, we've only had this Apple computer since November. All I am trying to do is put our website back on (we've been using Uplinkearth hosting). Now, it's all messed up and I am panicking! Can anyone help??
Thank you.
Kiply

I think my problem may be related to the fact that we are using a wireless internet card and it keeps quitting when I try to upload. I can sometimes get it to upload but it's been one file at a time (sometimes on a 4 kb file). I haven't gotten the whole site uploaded yet... and the few pages that are partially uploaded are missing (links and frames missing). A fellow using a windows program looked at one page that is partly up (http://www.tallgrasskennels.com/Breeding.html) and said it had some light bluish backgrounds behind some of the titles, etc. I'm hoping that once we get it all uploaded, things will be where and how they should be. Can windows people see the frames from iWeb? Anyway, I am SLOWLY trying to upload via Cyberduck to our hosting service. I think I'll start a new thread regarding wireless cards and uploading, but I wanted answer this thread.
Thank you.

Publishing Problems (Please HELP)

I just got a new account for iWeb and now it isn't publishing my website. I can't figure out what is wrong. I keep getting this error message after I hit 'publish':
Publish Error: An error occurred while publishing file “/private/var/folders/ti/tiZRTNzVFSAifGXFkt4O+++TI/TemporaryItems/com.apple.iWeb66864_TEMP_2636342365/sites/MBsPhotography/Scripts/Widgets/SharedResources/WidgetCommon.js”. Try publishing again later.
It goes through creating the pages but then when it is processing it gets to the end and then gives that error message after a lon time. I don't know what to do. Re-create my website is the next step. I really don't want to do that. Grrr. Please help if you can! Please!
Message was edited by: steelrose1121

Welcome to the Apple Discussions. Can you publish to a folder on the Desktop? If so as a workaround until a fix is found you can mount your iDisk and copy the site folder and it's index.html file to your iDisk/Web/Sites folder. It's MMe. It's just not very reliable.
If you can't publish to a folder log into another account on your Mac, copy the domain file from your current account to the other account, log into MobileMe for that account, open the domain file with iWeb and see if you can publish from there. If you can then there's a problem with creating temporary files in your other account.
OT

Another Publishing Problem

Similar Messages

Maybe you are looking for