Another question about processors and cores.

I did a search and review, but I'm not clear about one thing. There was one thread where it was mentioned that more cores would allow for more video streams to play in real time on the timeline. I need to get at least two HD video streams with alpha, one audio stream, a background still, and a foreground text overlay to all run at once. Can an iMac with just the i3 or i5 dual processors do that, or do I need to step up to the quad core iMac or the MacPro?

Shane Ross wrote:
I can get by with just one HD stream and one audio stream. So for that, will any of the processors in an iMac do?
HD stream. WHAT FORMAT of HD? DVCPRO HD...HDV...PRORES...yes. UNCOMPRESSED HD...no. And again, the amount of streams isn't related to processors...it is related to HARD DRIVE speed.
For the intermediate video with alpha, what is the best HD format to use that has no compression?
NO compression? Well, the only NO COMPRESSION alpha codecs there are is ANIMATION...and that isn't playable. ProRes 4444 is the one with the Alpha built in. It is compressed, but pretty darn lossless.
Point is, you need a good 4-5 drive eSATA RAID...or better.
Shane
I start with an image sequence out of Lightwave 3D. I currently use PNG images with alpha. Those are then rendered into video clips - one talking, one not. I use those clips over and over again in a single layer on the timeline and match them to the audio. That intermediate project is then rendered out with alpha and used in the final project.
That's why I need an uncompressed/lossless format, because I'm building up the project with a couple of prior renders. Sounds like ProRes 4444 would work unless there is a no-compression format.
How could I use an eSATA when none of the Macs have an eSATA connection?

Similar Messages

Another question about iPhones and malware/virus

Thought I would post this as a separate question.
iPhone 4s. legit (not jail broke)
I know the iOS is pretty protected against virus and malware. And that you cannot download things onto the phone other than through the app store
But what about what they call drive by downloads? Where you go to a web page and it automatically installs something without asking?

UACount wrote:
thanks all. This is so freaky to me. If the iOS is so safe, why doesnt every PC use it? And I dont mean that sarcastically
It's very safe but it also puts very severe limits on what the user can do to tweak the OS and on things that applications can do. For example, most people would balk at only being able to by applications for their computer from one approved source. In fact, a lot of people don't like that about iPhones. Some people prefer freedom to modify their device to security.
In fact, the Mac OS, which historically been less prone to viruses is adopting some of the feature of iOS.

Ask another question about JIN and C/C++

Using JNI on Solaris, is there any differences to build a shared library compiled from C code or C++ code?

Huh?
If you create a C/C++ file and use jni.h and use the method signatures from javah then either file will work. Depending on various factors, like the file extension, then you might have to specify different command line options to get the file to build.
A C++ file could have templates would add additional problematic concerns.
If you are talking about a C/C++ object files/shared libraries in general then there are conceptual differences (like mangled names) but no actual differences (mangled name is a legitimate C ident.)

Yet another question about exporting and video quality

Kind people,
I know this question has been asked many, many times, and I have searched and read up of the topic, but I would also like to ask it.
I shot my video on a Canon Vixia HF10, downloaded it to Final Cut Express to edit, exported it as Quick Time Movie, dropped it in iDVD, then played it on my TV and the quality was…..not good. The video was a little fuzzy and there were ghosts. Are there any settings I should go back and check in iDVD.
Wolfgang

Hi(Bonjour)!
What is the format recorded by this camera?
How did you capture/ingest your video material in FCE?
What was your sequence format in timeline?
How did you export your sequence (specify exact steps, menus and command)?
What was your iDVD project settings?
What was the iDVD quality setting?
Did you monitor your DVD on computer screen or TV set?
Michel Boissonneault

Another question about throughtput and Queue Length

I do not exactly confirm the meanning of throughput and Queue Length in
the console of performance of weblogic server.
AnyOne can give me a explanation? Thanks a lot!

If you look at the ExecuteQueueRuntime MBean
(you can use these 2 jsp's:
http://dima.dhs.org/misc/listMBeans.jsp
http://dima.dhs.org/misc/showMBean.jsp
or Sun's HTMLAdaptor: http://dima.dhs.org/misc/StartHtmlAdaptor.jsp
to browse WLS MBeans.
PendingRequestCurrentCount
     Returns the number of waiting requests in the queue.
ServicedRequestTotalCount
     Returns the number of requests which have been processed by this queue.
ExecuteThreadCurrentIdleCount
     Returns the number of idle threads assigned to the queue
PendingRequestOldestTime
     Returns the time that the longest waiting request was placed in the queue.
Eric Nie <[email protected]> wrote:
I do not exactly confirm the meanning of throughput and Queue Length in
the console of performance of weblogic server.
AnyOne can give me a explanation? Thanks a lot!--
Dimitri

ANOTHER Question about my iMac G3. Mac OS X and RAM

Hey, I have ANOTHER question about my iMac G3.
I know that I'm supposed to have the latest firmware updates for my iMac G3 running OS 8.1, which I do, but I read some where these firmware updates could only be updated if you're running OS 9.2. Yet when I run the firmware updater, it says my firmware is up to date. I just wanted to make sure this was correct because I just ordered an OS X 10.2 CD today, and I don't want my mac to be "dead" when I install it.
My next question is how much RAM can my mac hold. It's an iMac G3 with a 233 mhz processor, if that makes a differemce.
Again, thanks to the people who have helped me with my first Mac.

hi there--
unfortunately you require system 9.1 or 9.2 for the required firmware update 1.2 for your computer http://docs.info.apple.com/article.html?artnum=86117. so you'll have to install that if you want to install 10.2. it may work for you for a little while, but then you could possibly lose all your information. so i wouldn't advise attempting installing 10.2 without the correct firmware. [ : ) ]

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

Yet another question about super raid - GS70

Yes, another question about Super Raid...I recently picked up the cheapest model of the GS70 on newegg which comes with 1 mSata SSD...just a mediocre one if I remember reading correctly. I'm interested in using MSI's Super Raid once my warranty is over with and have been reading a couple posts here:
1. Walk through of how to reinstall OS
--> https://forum-en.msi.com/index.php?topic=167198.msg1224063#msg1224063
2. I'll need a Super Raid card with links to get some, for about $100 each
--> https://forum-en.msi.com/index.php?topic=171722.msg1252847#msg1252847
3. I can't get Super Raid unless it originally came with it?
--> https://forum-en.msi.com/index.php?topic=171185.msg1249640#msg1249640
So what's the bottom line? Would I still be able to enable super raid in the future or am I SOL since it didn't come with it originally?
thanks!

The GT70 CAN come with an adapter that has 2 (on the older, GT70 0NX models) or 3 (on newer GT70 20X models) sockets for mSATA drives. It's an optional part, that takes place of the primary SATA drive in the notebook, and physically has a different part that connects to the motherboard. If it doesn't come with the SuperRaid adapter, then it just has support for a single 2.5" SATA drive.
The GS70 on the otherhand, has this built into the motherboard and there is no swapping it out for a normal 2.5" SATA drive. You can only use mSATA drives (on those ports). The GS70 is meant to be an ultrabook, and therefore does not have the same ability as the GT70 to house up to 2 full size 2.5" SATA drives.
That's really the main difference here. Without physically seeing a GT70 to see how the SuperRaid adapter works, it's slightly difficult to explain.
But in the end, I wouldn't worry about the SuperRaid....The GS70 should have support for Intel Raid Management Engine, in which case that's all you really need.

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Is there any way we could find about processor and...

we can easily find about processor and ram from our computer.will it be possible from mobile phone

need third-party applications to display that information on your phone. although Nokia Energy Profiler, available from Forum Nokia website, displays the amount of RAM being used by the phone.
please throw some kudos our way, it would mean a lot to us
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Another question about processors and cores.

Similar Messages

Maybe you are looking for