Another question?  Is 2G iPhone data plan lower than 3G iPhone data plan?

If I take a 2G iPhone into AT&T and get it set up, is the data plan rate for 200 text messages and internet lower than the 3G iPhone data plan rate. I know the 3G in $30 + $5 (200 text messages) = $35. What would it be for the 2G?
Thanks...
(I want to give my wife my 2G to replace her flip phone and get me a new 3G)

The First Generation iPhone is $20 for Unlimited Data and includes 200 SMS text messages, You can add more to the plan but it will be an additional cost. For $40 total you get Unlimited Text and Data usage.

Similar Messages

  • Sorry, but still another question about ampersands in data.

    I'm sorry to raise a question that has been discussed before, but I have searched the forum and have not found anything I understand.
    The problem: I have a user requirement to link two pages using a column value on the first page that may contain embeded ampersands. A link on this column is defined on the first report page and the passed value is to be used in a Where clause for the second report page.
    This works fine for values that do not contain ampersands, but, of course, the ampersand is escaped from '&' to '&amp" as it is passed from the first page to the second and thus fails as a Where value in the SQL on the second page.
    I have tried many ways to get an un-escaped value passed, and to un-escape the value once it is accessed on the second page, but to no avail.
    This is not a user requirement I have control over, but one I must accommodate, unfortunately.
    Can some kind soul provide me with help in dealing with such values passed from page to page?
    Thank you in advance.

    dccase:
    I have tried the UTL_URL.UNESCAPE function but I tried it in a "Process" rather than a "Computation". I'll give that a try.
    Bob:
    I haven't had much luck understanding just when and how page items get populated and/or processed. As I understand your method, you go to Page 2, to Page Edit, to Source, and use the 'replace' function on the field that was loaded in Page 1. I hope I am understanding you properly. I'll give this a try too.
    Thank you both. It is good to know I'm not the only one to have to deal with this.

  • Two iPhone questions (existing customer and data plan)

    Hello, I have two questions about the iPhone. I am on a family plan with At&t. I don't pay my bill. I want to keep it that way. Will I just be able to take my sim card out of my phone and put it in the iPhone since it's AT&T? Or do I use a new sim card and when activating it choose existing customer?
    My second question is I am wondering if it is possible to use an iPhone without the data plan. I know I will be missing visual voicemail and edge but I don't care. Also, will this make me get a thousand dollar bill if I accidentally press safari and don't have a data plan? Thanks.

    friend18 wrote:
    Hello, I have two questions about the iPhone. I am on a family plan with At&t. I don't pay my bill. I want to keep it that way. Will I just be able to take my sim card out of my phone and put it in the iPhone since it's AT&T? Or do I use a new sim card and when activating it choose existing customer?
    You can't use the SIM from your existing phone. You would use the new SIM and activate as an existing customer.
    My second question is I am wondering if it is possible to use an iPhone without the data plan. I know I will be missing visual voicemail and edge but I don't care. Also, will this make me get a thousand dollar bill if I accidentally press safari and don't have a data plan? Thanks.
    You have to get the data plan and for $20 it's worth it, not only is it unlimited data but includes 200 text messages. Without the data plan, you'll pay for every voicemail you access, every text message, any time you check weather/email/youtube/etc. In a nutshell, the data plan covers a lot more than just using Safari to browse the web.

  • Another question about adding music to iPhone

    Apologies for yet another question regarding adding music to an iPhone but I am completely stuck.
    I bought a new laptop in January (it runs windows 8). I've authorised it and synced my phone to it before. I've used it to add music before.
    Lately I've just been buying music directly from itunes on my phone but I wanted to add some music from my older collection that is on an external harddrive.
    I've gone through the process of syncing the phone again, which has wiped whatever was on there. I made sure I'd ticked on the "manually manage music" box. 
    It's put all my purchased music back but it still will not let me drag and drop music from my external harddrive. When I hover over with the file it has "link" but it won't actually send the music to the phone.
    Is there a way for me to do this without putting music on to my itunes library? I don't like itunes and I definitely don't want to add the music to my laptop as it defeats the purpose of having an external harddrive! Sorry for such a long-winded explanation.

    Just to add... I've now tried adding music to the library (getting desperate here) and it's not letting me do that either. Just says 'link'.
    This is the most frustrating thing ever. Why are the simplest of tasks made so difficult? It seems like it only works if you buy the music from the iTunes store.

  • A bundle of questions from an iPhone newb...

    Ok so me and my wife recently both got the iPhone 4, and so far we love it. We haven't had any issues, except a tricky time getting the phones to hook up to the wifi here at our house but that was resolved pretty quickly. So here we are, two iPhone rookies and we had a few questions that we didn't get around to asking the sales guy because we didn't want to hold up the 50 other people behind us in line... waiting in the rain... at 6a.m. So here's a short list of questions I was hoping to get answered. I tried searching the message boards but couldn't quite find the answers I needed.
    1) What all exactly constitutes data usage? Sounds simple, but we just came from another carrier with an unlimited data plan and we never thought about how much we used, until we got stuck with the 2gig cap imposed by AT&T.
    2) Does the data usage covered by my plan get drained even when I'm on my home wifi connection? In relation to that, is it better to stay connected to wifi or the 3G cell network?
    3) Is the 2gig cap on data usage per phone or shared between us?
    4) Which apps use the most the data? Please don't say Facebook or the news... those are the two apps I use most....
    Thanks for any answers!

    Hi Josh,
    You live in a populated area, so you probably have WiFi most places. Thus, if you are at Starbucks and hop on their WiFi, there is no data usage from ATT's standpoint. If you are in Starbucks and don't hop on their WiFi and surf the net, then you'll get data usage.
    Go to Settings -> General -> Usage and then scroll down to Cellular Network Data and it will tell you how much you used. Keep an eye on it for a few months (you can reset it whenever you like) and you'll have a good idea of how much data you are using.
    Enjoy your phones!

  • Question regarding roaming and data usage

    I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
    I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
    If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

    Ann154 wrote:
    If you are getting charged to use the wifi, then it is possible.  Otherwise no
    Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free .   Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones)  So these charges, if any, will not show up on the verizon bill app.  Having it in airplane mode prevents all cellular data traffic so you should be fine

  • Can I use One Hard Drive for 2x Time Machine Back Ups and another partition for all my data?

    Hi Forum,
    I am planning to but a RAID disc set up, but if i get a 2 disc set up, on one disc, can i have:
    Time Machine back up for one Mac
    Time Machine back up for 2nd Mac
    Anothe partition for all my data.
    then have that RAID'd to second disc?

    no one?
    and if this set up was on one disc, and one partition for one TM was for the Mini that has this drive attached, would TM back up this whole drive 2x TM Partitions and 1x partitions with data on, ok? it wouldn't get confused by trying to back itself up

  • HT204053 i have an apple id on my ipod & another for my macbook & iphone.  how do i change the id for my ipod to match the one for my macbook & iphone?

    i have an apple id on my ipod & another for my macbook & iphone.  how do i change the id for my ipod to match the one for my macbook & iphone?

    To change the ID:
    For iMessage, go to Settings>Messages>Send & Receive (Receive At in iOS 5), tap the ID sign out, sign back in using the other ID.
    For FaceTime, do the same thing in Settings>Facetime.
    For Purchasing, do this in Settings>iTunes & App Stores (Settings>Store in iOS 5).
    For iCloud, you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account.  Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them.  To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.  Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. When prompted about what to do with the iCloud data, be sure to select Keep On iPod.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.

  • Thanks all for the great advice.  Another question.  If I use Entourage on my desktop Mac to access an email address I use on there, is it possible to be able to access my email on that same email address on my iPad either with or without Entourage?

    Thanks all for the great advice.  Another question.  If I use Entourage on my Mac desktop to access my mail using an email address I have on there, is it possible to access my emails on that same email address on my iPad, either with or without using Entourage.  Is there an Entourage app, or something I could use?  Thanks...

    Simply add the email account to Mail, no need for Entourage.
    One word of warning, though, iPads tend to become community property (meaning anyone who uses your iPad can access your email). That is why I have zero email accounts on my iPad.
    I use Entourage on my desktop as well, so going back and forth between Entourage and Mail (whether on your iPad or iPhone) is no problem.

  • Add Total to Stacked Column Chart on the top and another important thing is the data are from SharePoint site

    the same with the following description from another question:
    "How can I display a total on top of each column on a stacked column chart (using
    reporting services 2008)? If I use Data Labels I can display the
    values for each part of the stack on a stacked column, but I want to be display the total.
    For Example: If I have stacked column on chart with a value of 10 for the 1st stack, 20 for the 2nd stack,
    and 20 again for the 3rd stack - I want to display 50 (the SUM total) as the data label on top of the entire column..."
    and a solution for this would create a new column named SUM(category group), this can be done with data source from SQL server, but my data is from SharePoint site list. its query seems can't be changed which means I can't add a SUM column.
    what should I do with this? Can anyone give me a hand?
    thank you very much.

    Hi sophiexu,
    If we want to display a total for each column on the top of a stacked chart, we can use a matrix control to display the column total value to work around this issue.
    The following thread about how to simulate chart legend is for your reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cfb4fa19-b2ba-426a-804b-b5ea83d70d62/ssrs-2008-chart-legend-missing-customitems-property
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Question about send/receive data in as3

    hello
    i want to ask : how can i send data from flash to php using as3 and receive data from php using flash .
    and another question : how can i upload files using as3 .
    thank you .

    Look into URLLoader documentation for sending/receiving and FileReference for uploading:
    http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/URLLoader.html
    http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/FileReference.html

  • Another question (master socket)

    Sorry for another question, but this is a forum after all .
    Tomorrow all being well I should receive my welcome pack and business hub and on Friday I should receive Infinity, however I need something answered before the installation begins on Friday.
    When I moved in my master socket, well, it had no faceplate on the bottom half (just a test socket basically) so I got myself one of those ADSLNation faceplate things which fit to the bottom half of the master socket and work as a filter. My question is:
    - Should I remove the ADSLNation faceplate, use a standard micro-filter instead and explain to the engineer (if he queries it) that when I moved in there was no faceplate on the lower half of the master socket?
    ... or ...
    - Should I leave it as it is with the ADSLNation faceplate on the front (screws don't properly fit either so I didn't bother with screws for that)?
    Just concerned that if I appear to have used the ADSLNation (in other words not official BT faceplate) instead of an official BT one then the engineer might make a fuss or something?
    Many thanks.

    I see. Thanks for the clarification everyone.
    I'll either take it off before Friday morning and use a normal micro-filter, so that it has no opportunity to go missing with the engineer, or if I decide to leave it there I'll make sure the engineer doesn't take it with him (as it doesn't belong to him after all, since I purchased that from ADSLNation and may at some point in the future need it again, e.g. if I moved years later to a location where Infinity isn't currently supported).

  • Upload Maximum Date Rate Lower Than Upload Data Ra...

    Hello there,
    I have just brought up my BT Home Hub 5 stats and my upload data rate is higher than my upload maximum date rate. Is this normal? My upload noise margin has dropped to 4.9 - 5.1 dB. I've had BT Infinity just over 2 days and was wondering if this was normal for FTTC connections?
    Many thanks,
    William

    normally the data rate will be lower than max data rate but yours is that close I would not bother unless it starts to affect your connection which is unlikely
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Another question re:daisychaining lacie, canon, g5

    I read the post from a few days ago about problems capturing while a lacie is plugged in at the same time that a Canon camcorder is plugged in and I have encountered the same problem (I am using FCE). I also read how someone said they have dealt with it, i.e., capturing to the internal, restarting, then moving the clips to the LaCie. I have done this (prior to reading this, not as a result of reading it), but encountered a problem. I lost everything.
    I moved the captured clips to my LaCie--or actually, a copy of the clips was made when I dragged and dropped. I then went back and moved the "original" clips to the trash and emptied the trash. When I went to use the copied clips on the LaCie, they appeared to be there, but all the data was gone. In other words, I couldn't use them in the sequence I had begun. I had to go back and 'capture project' to get them all back. Major bummer.
    So here's my question. When "moving" captured clips, render files, etc. from the internal drive to my LaCie, they don't appear to be truly moving, just copying. Is there a way to move the original files so that I'm not having to move anything into the trash? I've been working on an opera on the internal drive and now have run out of space halfway thru rendering (I so knew this was coming!). I've "moved" (copied) all the captured clips and render files to my LaCie and subsequently dragged the "originals" to the trash in an effort to free up space. I am now petrified to empty my trash. I'm scared that my two-hour opera that took six hours to capture and another week to put together will be lost completely. Can anybody help???
    Another question: is there another brand of external hard drive that is compatible with my Canon GL2? I'd so love to just be able to capture right to the external...
    Thanks!!!
    Heather
    iMac G5   Mac OS X (10.4.2)  

    Hi Heather.
    I don't know what happened to your clips but it is certainly not normal!
    When you drag and drop to your LaCie you are making a perfect byte for byte copy of your originals. They are identical.
    There is no way you can "move" your originals to another HD and have nothing left to trash.
    What I suggest is do a little test - capture five minutes of video and copy it across. Delete the original files and try a few minutes of editing - a few cuts, several transitions and effects to check that everything is OK.
    Ian.

  • Table EABL Question SORT with  reading date ADATTATS and  ADAT

    Hi all,
    I have selction criteria to qery EABL.
    After select ,i have to sort to get  latest 10 records from EABL .
    I  was told if the value of ADATTATS  is null ,i should display ADAT .
    But to select latest 10 records i have need to sort based upon date field..IF date field is null i will not get sort in proper descending order......
    Any suggestions and help ?
    display :for a partcular contract account
    Current meter reading date 1
    previous meter reading date 2
    previous meter reading date 3
    Is there any other field in this table EABL  which could be used for SORT here  for this display.
    Thanks in advance...
    Edited by: Sona on Feb 26, 2008 7:29 PM

    Yes,
    My case is :
    ADATTATS      
    record1 : date1         
    date2        
    null          
    null           
    record5 : date5   
    ADAT 
    record1 :  0
    0
    date3
    date4
    record5 :     0 
    Result is :
    date1
    date2
    date3
    date4
    date5
    I was told only if date is null in ADATTATS  i should go for ADAT.(that means only then value will be in ADAT)The majority of the time there will be a date in ADATTATS.  If an estimate or manual MR is entered, the date will come from ADAT.
    My test table has all null values in ADATTATS ,i hv values only in ADAT in test table.
    Another question :
    Can we change the data in test tables ?
    Testing process to check the billing run ?what r the steps involved ?

Maybe you are looking for