Another question regarding smil files and NPR

I'm having troube listening to NPR smil files. I've read the previous posts regarding this issue, but seem to be experiencing a different twist. There are no files downloading to play when I click on "listen". When I click the "listen" button a QT safari screen appears and I get a spinning arrow with heading "downloading". However, nothing ever downloads to my desk top. This is very strange as just last weekend I downloaded NPR files and they were saved to my desktop as Real Time files and I was able to play with them with no problem. I've done nothing to QT or RT in the mean time.
I've tried the previous suggestions posted of going to the Get Info section of a previously downloaded smil file and changing the settings to say all smil files should play with RT - restarted my computer - nothing. Help!

Was able to figure this out myself. Had to go into QT preferences and elect to not play smil type files and go in to RT and re-elect to play smil files using RT. Restarted my computer and it works like a charm.

Similar Messages

Waveburner; a few Questions regarding track files and Session Data

After a bit of negotiating, I'm almost ready to burn. Was having problems with file locations and discovered that i had multiple files in different locations. Those have been eliminated and all relative track files are in one place now with the Song Data File as well.
I then re-imported the individual aif tracks only to find that all of my fades and edits are GONE. It appears that I may have to DO THEM ALL OVER AGAIN! Please tell me that there is a work around.
Is it possible to import only the Session Data related to the fades and edits(everything but the actual audio files), so as to avoid all this "do-again" work?
I was also wonder if it is necessary, or perhaps a good idea, to change the File INFO for each of the individual audio track files from "OpenWith" iTunes (default setting) to "Open With": WAVEBURNER ?. (selectable on the aiff files, "Show More Info" window
Currently the aif files are set to "OpenWith" iTunes (default)
One last question please.
Is Waveburner really up to snuff? How many people are using this for Mastering and Burning CD's? I'm about to start inserting some AU Mastering Plug Ins and I'm hoping for the best. Any other suggestions are greatly appreciated.
G5 Dual 2.0/PBook G41.5Ghz/LogicPro7 Live5 Reason3.0 PansncDA7 TascamFW1804 Mac OS X (10.4.7)

You're grammer isn't bad jord, it was I who asked a plethora of questions under one Subject heading.
When i open the project file(.wb3),
The prompt says;
"Please choose a replacement from the list below:"
/Volumes/320GB HD/Users/ahuihou/.Trash/1 Track 01.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/2 Track 02.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/3 Track 03.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/4 Track 04.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/6 Track 06.aiff
As you can see the files are in the trash.
The first problem is that there are no actual files in the trash. Just an icon of a CD Disc which was dragged there to eject it, It is no longer in the disc drive/tray. Perhaps i should put the disc back in the drive and then update/replace the files afterwords. (The CD is scratched.)
The strange thing is that i can still preview the track that's in the trash by selecting More Info and playing it on the little Quicktime player bar. I guess the file is in a cache somewhere?
I've looked everywhere on all drives for the specific files but can not find them anywhere.
In the Replacement prompt there is a place that I can check to "Search in the same folder for subsequent files" button on the "Replacement" prompt.
which "same folder" is it refering to?
The Trash folder where the old files are or the Folder where the actual .wb3 project file is? I do have all of the correctly named song files/regions in the same folder with the project file.
maybe i should just start again. i'm not one to give up easy though and would much prefer to "beat" the computer at the game.

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

Few questions regarding Oracle Scorecard and strategy management.

Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.

bump.

I got a question regarding running iOs and Windows using virtual software.

Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!

That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.

MOVED: question regarding CPU temps and latest bios (1.8)

This topic has been moved to AMD64 nVidia Based board.
question regarding CPU temps and latest bios (1.8)

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

Questions regarding *dump_dest parameters and fast_recovery_area

Hello,
I just installed a fresh new 11.2.0.2 Database on Solaris 10.
Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
With this, questions are popping in my mind regarding some parameters after installation.
First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
background_dump_dest       /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
user_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
total 2
drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
total 3
drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
I want to know how to do it well before reinstalling a fresh database.
Thanks
Bruno
Edited by: blavoie on Oct 31, 2010 6:18 PM
Edited by: blavoie on Oct 31, 2010 6:20 PM

Hi,
I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
oracle@enalab13:~$ echo $ORACLE_SID
ocpdbFast recovery area directories, dates prove that it's my fresh install:
oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
fast_recovery_area/:
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
fast_recovery_area/ocpdb:
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
fast_recovery_area/OCPDB:
total 2
drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
fast_recovery_area/OCPDB/archivelog:
total 1
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
fast_recovery_area/OCPDB/archivelog/2010_11_02:
total 47032
-rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
fast_recovery_area/OCPDB/onlinelog:
total 0Some interresting output asked earlier in post:
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence     4
Next log sequence to archive   6
Current log sequence           6
SQL> show parameter recovery
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      /u01/app/oracle/fast_recovery_area
db_recovery_file_dest_size           big integer 4032M
recovery_parallelism                 integer     0
SQL> show parameter control_files
NAME                                 TYPE        VALUE
control_files                        string      /u01/app/oracle/oradata/ocpdb/control01.ctl,
                                                     /u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
SQL> show parameter instance_name
NAME                                 TYPE        VALUE
instance_name                        string      ocpdb
SQL> show parameter db_name
NAME                                 TYPE        VALUE
db_name                              string      ocpdb
SQL> show parameter log_archive_dest_1
NAME                                 TYPE        VALUE
log_archive_dest_1                   string
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
SQL> show parameter %dump_dest
NAME                                 TYPE        VALUE
background_dump_dest                 string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
user_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
Thanks
Bruno

Question regarding XI/PI and Idoc processing.

Hi,
I'm learning XI/PI and I have a question regarding Idoc processing in PI.
We need to configure communication between our BW system and our PI system using Idocs.
The Idocs are sent from BW to our PI systems and are then sent back to the BW system, there are no third system involved. The idocs are only between PI and BW.
Our BW system is already connected with many other R3 systems by using WE20 / WE21 and RFC's and everything works perfectly.
While I configure this communication between BW and PI it seems that PI is passing the Idoc to the Idoc adapter, converts it to xml and tries to find a receiver for the particular Idoc. I see the error "NO_RECEIVER_CASE_ASYNC" in SXMB_MONI.
Is this a normal behaviour in PI ? Why is PI thinking that the Idoc needs to be sent to another system when it is infact for itself ??
Thanks and regards
Remi

Hi
for error "NO_RECEIVER_CASE_ASYNC" in SXMB_MONI.
This problem may occur due to one of following reasons, so check
1 service is active in message? transaction SICF and activate service sap/xi/engine (right click, activate)
2 Is the port 8001 defined in the services on the smicm under services?
3 Check the roles assign PIDIRUSER
http://help.sap.com/saphelp_nw04/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
role: SAP_XI_ID_SERV_USER attached to it
Also Check Whether PIDIRUSER has following role
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Regards
Abhishek

A few question regarding oracle Vm (and virtualizing Db 11g)

Hi,
I've just started evaluating Oracle vm for our next deployment.
One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?
Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?
And another question regardin oracle vm: in the manual, chapter 4.6.2 says: "Install an operating system. This may be done a number of ways.
■ Install an Oracle VM Server-enabled operating system from CD-ROMs...."
Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?
Thanks
Jernej

Jernej Kase wrote:
One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?I would probably start with the standard EL5 template instead. The Database template is designed to automatically configure and provision the database with ASM and would probably take longer to dismantle.
>
Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?It sounds OK, but ASM does all of that and more. It is also faster (particularly on Oracle VM, as it uses direct access to the disks). ASM also does automatic data levelling and striping. With 11g, I would strongly recommand ASM over LVM for your storage.
Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?There isn't a list -- that's possibly badly worded as well. If you don't want to use one of the paravirtualized Oracle Enterprise Linux templates available on eDelivery, you can use any operating system installation CD in ISO format. Note that installations from an ISO are done as fully virtualized guests (i.e. hardware virtualized) and require Intel VT-x or AMD-s extensions to be present and enabled. Hardware virtualized guests are also not as fast as paravirtualized Linux guests.
Oracle only certifies Database 11g running on Enterprise Linux in paravirtualized mode. The simplest way to deploy this is to use the provided templates.

General question regarding environment files in APPL_TOP

Hi. I will be passing my OCP (hopefully) next month and I am now turning my head to teh Applications side since my job involves a lot of Oracle Financials.
I just did a clean installation of 11.5.10.2 but at the level of seeting environment files, my boss swooped in and did them all. I would love to know which ones need changing, or even which ones do what ...
I am using the Oracle doc Re: Generate the Database Context File
to follow with, but what I see before me in our own (9i, AIX 5.2) set up doesnt always mirror what the doc says.
I need some general information about these env. files. In our <ORA>APPL directory we have the following env. files:
APPSORA.env
DEV.env
DEV_davidcl.env
APPSDEV_davidcl.env
DAVIDCUST.env (I have changed our firm's name to David)
In the doc, it explains that there is a "main applications env file", and a consolidated applications file". <CONTEXT_NAME>.env and APPS<CONTEXT_NAME>.env respectively. Which ones are those in my directory listing?
I have also checked in the .profile of the appcldev and the appdbdev users, and they both point to the same two environment files -
$APPL_TOP/DAVIDCUST.env
and
$APPL_TOP/APPSORA.env
Sorry this is a bit scrambled message - is there any other source out there to explain environment files?
Thanks
DA

Thanks - they are the same! That's why the DEV_davidcl.env has all the parameters that according to the doc APPDDEV_davidcl.env should have.
Thanks - very helpful. The DBA here never has any time to explain this stuff, since I think he's been doing it for so long that he doenst understand why anyone would not know it too. Its very hard working for him sometimes since nothing is explained.
All of my questions are stemming from this clean installation of 11.5.2 that I have done.
I am still wondering about the .profiles of each user we have on the system though. I understand that we had to copy the profiles from TEST to this, our DEV side, then we edited the profiles to match the DEV parameters. Fine.....but the actual .env files themselves - I am looking at them and dont understand at all.
Each .profile and each user are as follows:
appdbdev:
appdbdev@TEST:more .profile
APPL_TOP=/oradbi3/oracle/testappl;export APPL_TOP
. $APPL_TOP/DAVIDCUST.env
. $APPL_TOP/APPSORA.env
appcldev:
appcldev@TEST:more .profile
APPL_TOP=/oracli3/oracle/devappl;export APPL_TOP
. $APPL_TOP/DAVIDCUST.env
. $APPL_TOP/APPSORA.env
So these two, both on the cl node, appear to be pointing to same env files.
Then comes the db node:
oradbdev:
oradbdev@TEST:more .profile
. /oradbi3/oracle/devdb/9.2.0/DEV_daviddb.env
. /oradbi3/oracle/devappl/DAVIDCUST.env
I think I can understand the .env that are pointed to on the cl node, but I dont understand the oradbdev .profile, since its pointing to oradbi3/oracledevdb for one env file, then oradbi3/oracle/devappl for another.
I asked our DBA about this, and he said "dont worry about it". I have to try and run the script to start the application server this morning, but every time I try to su to the db node user I get this:
doralcl:/> su - appdbdev
.profile[2]: /oradbi3/oracle/devappl/DAVIDCUST.env: not found.
Like I mentioned, I pinted this out to our DBA and he told me not to worry.
DA

A few questions regarding SAP EWM and WM

Hello,
I have a few general questions regarding the differences between EWM and WM:
1) What are the benefits of EWM-MFS compared to WM + TRM (especially in terms of SPS)?
2) The Quality Inspection Engine (QIE) can also be used by SAP WM, right?
3) There is RFID-support in EWM, so EWM is able to communicate directly with SAP Auto-ID, right?
But I have heard that SAP PI is necessary in some cases, when and why?
4) Is there something new in EWM regarding goods receipt processing?
I have read that the splitting of inbound delivery items is possible in EWM in case of missing inbound delivery items. Is this really a new feature?
5) EWM can easily be connected to SAP BW for reporting purposes, what about WM?
6) What about scalability if the warehouse grows?
7) Is there any information about the costs of using EWM compared to WM and vice versa?
I appreciate any kind of help.
Thank you.
Dennis

Hi,
1. What does SAP offer as a product for dWM? Is it a u201Cspecialu201D installation of the SAP framework dedicated to WM or is it a standard ECC box where only the WM module is used?
There are two version of DWM. One is Decentralized WM as a part of ECC and another one is EWM as a part of SCM. Both are decentralized.
2. My understanding is that the interfaces between ERP and dWM can support some non-real time operations (like when the main ERP system is down, the dWM can still perform some operations). Considering that the transactional interfaces are based on BAPIs, how does SAP achieve this interfacing in non-real time environments? I am thinking you can complete the different processing unless both systems are up
When it comes to interfaces, DWM needs Deliveries from ERP. That's it, WM can function from there independent of ERP system. But, WM defenitely needs to communicate back PGI and PGR and other posting changes . So, in case ERP is down, even though PGI / PGR is done at WM end, they may not be communicated back to ERP. But WM generates PGI/PGR IDOCs which can always be reprocessed at WM end to resend them to ERP so that Inventory levels are accurate.
Hope that helps
Thanks
Vinod.

Questions regarding xft fonts, and awesome wm

Hi, I just tried ArchLinux yesterday and loving it!
I use JWM, but am very interested in dwm/awesome wm. I do have some questions:
1. On a thread in the forum, it is mentioned that dwm has no Xft support. How useful exactly is Xft? Would it impact on design work involving GIMP/Inkscape/Scribus?
2. Does awesome have Xft support?
3. I installed awesome, but I have no idea on what keys to use. The shortcuts are different from dwm. I tried to look for quick tutorial just to get the basics (dwm has one on their website), but seems like all documentation I found have none of that section and go straight to configuration.
Do I actually have to configure the wm before I can use it at a very basic level?
4. I would like to do some more comparison between wms, trying to find a good balance for me in regards of lightness and functions I need. However, I have no idea on what to use to keep track of cpu/memory usage for all the wms. What's a good way to do this?
Thank you in advance.

Welcome to Arch!
1. The lack of xft support in dwm mostly just means that you won't get anti-aliased fonts in the status bar. Individual applications will still have the same font support they had before you used dwm.
2. Awesome uses pango for font rendering, which is even better than xft.
3. Look at the man page for default key bindings. It's more or less usable out of the box, but you will definitely want to customize it somehow.
4. A good system monitor is htop. Install it from the repos and run it from a terminal.
Last edited by fflarex (2009-02-23 18:44:45)

Little help please regarding deleting files and folders...

My wife has a MBP and has accumulated some old items in her documents folder that she'd like to delete. She has a USB mouse but the "right click" doesn't appear to work. She's running 10.4.11 and can't reveal the files in icon mode to facilitate dragging to trash. Certainly there is a sequence of keystroke commands that will allow these files to be effectively trashed, but our "control/delete", or "apple/delete", or "option/delete" doesn't do the trick after highlighting the subject file. Help please! TIA!

To delete a file or folder, high light it then using the keyboard type Command Delete and that will delete it. If you have multiple files and/or folders the same keyboard commands apply.
Regards,
Roger

Question regarding early termination and handset earpiece volume

Hello,
I purchased iphone a week ago from ATT.
If I terminate my contract after 10 months, do I have to return my iphone to ATT even though I pay the early termination fee?
Another question is this,
when I get a phoe call, the handset earpiece volume is not loud enough to hear in the noisy place.
Is there anyway to fix this problem?
Thank you.

chung1q wrote:
If I terminate my contract after 10 months, do I have to return my iphone to ATT even though I pay the early termination fee?
No, you only have to return it if you cancel within the first 30 days and don't pay the fee.
Is there anyway to fix this problem?
Your volume switches work differently depending on what you are doing. You may get a readout above the "speaker" symbol that appears on the screen telling you what volume is being adjusted.
If you are not using anything, the volume switches adjust the ringer volume.
If you are playing music or video, they adjust the music/video volume.
If your headphones are plugged in, they adjust the headset volume.
If you are actually on a call, they adjust the earpiece volume or speakerphone volume, whichever you are using (without a readout).
If you are on a phone call using bluetooth, they adjust the bluetooth volume.
Dial something like the National Time Signal (303) 499-7111 or your local recdorded weather and adjust the volume during the call.

Another question regarding smil files and NPR

Similar Messages

Maybe you are looking for