Another questions of error -61017

I have posted the questions of error -61017, after thinking more deeply, I think the error of -61017 maybe due to I have fully use the FPGA to RT FIFO. Will such error occurs when the FPGA to RT FIFO is full?

Please attach this to the original Thread.
Thanks

Similar Messages

LabVIEW 2012 Error -61017 sbRIO-9606

I get this error when I using the Open FPGA VI Reference.
The FPGA VI compiles and executes properly but when I try to use it with RT, I get the above error.
Any clues?
Thank you!

I had a similar problem last week which I had to go through NI Support to fix.
My problem was that my bitfile was up to date and would run fine interactively but when I tried to Open FPGA Reference in my VI I got error -61017. If i force a recompile it would then run until I rebooted my PC and it would do the same again.
In my case, the problem was caused by moving from LV2012 to LV2013 and I had an unused FIFO in the project which was never called in the FPGA VI...for some reason the reference to the FIFO was still there in LV2012 but not there in LV2013.
The 'fix' was to create a new project, add the FPGA VI to it and compile it under another project and then link the original Open FPGA reference to the new bitfile (or try a bitfile in a different location or a different bitfile altogether) which then updated the FPGA reference, broke my VI because the FPGA reference no longer had the FIFO (quick fix) and then it ran fine from then on.
Maybe the same will work for you but if not, someone might find this after searching for the same error code.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing. Then another box indicates "Error 7 (Windows error 126). Itunes will not start. Can someone tell me what the problem is and how to fix?

when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

TS4124 Hi, do you know how can I upload inelegible songs from itunes to Icloud. They are songs added from original CDs. Another question would be how can I transfer all the music I have in my Ipod Classic to my Itunes or ICloud as I want to back it up.

Hi, do you know how can I upload inelegible songs from itunes to Icloud. They are songs added from original CDs. Another question would be how can I transfer all the music I have in my Ipod Classic to my Itunes or ICloud as I want to back it up.

Depends on why it's ineligible. If it's under 96 Kpbs, try right-clicking on the file and choosing Create AAC Version. (If you don't see this option, go to iTunes>Preferences, click "Import Settings..." then choose "Import Using: AAC Encoder" and "Setting: iTunes Plus".) Then rescan your library to see if this version will add to iTunes Match. Or, after changing your import setting, just re-import the song to your iTunes library.
If the song is over 200 MB you would have to reduce it's size to make it eligible.

Error 61017 on LV 8.2

I had been running a host VI on our laptop with no problems for 2 days, making no changes. Then, when I tried to run it this morning I get error 61017, even after compiling. The same error comes up after reset of the cRIO and restarting the laptop. Any ideas, thanks
Kevin
UTHSC-Houston

I don't have an answer to your problem, but can tell you of a way to tell whether an FPGA VI needs to be recompiled or not (in case you didn't know about). From the LV Project right-click the FPGA VI and select "Target-Specific Properties...". This will bring up a dialog telling you the information about the last compile and whether a new compile is necessary before running the VI.
If you are confident that you haven't made any changes to the FPGA VI or Project that require a re-compile, you can set the Open FPGA Refence node of your Host VI to point to the bitfile instead of the FPGA VI. That should bypass any error check as to whether the VI needs to be recompiled or not.
Hope it helps.
JMota

Another strange powerpill error - problem with new aria2? [SOLVED]

Looks like I'm getting another odd powerpill error. Is this a function of the new aria2 package that got deployed a day or two ago?
# powerpill -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: The following packages will be downloaded:
[core]
glib2 openssh
[extra]
alacarte at-spi atk brasero bug-buddy cheese clutter clutter-gtk conky
consolekit dasher deskbar-applet devicekit-disks devicekit-power eggdbus
ekiga eog epiphany evince evolution-data-server evolution-exchange
evolution-webcal file-roller gcalctool gconf gconf-editor gdm gedit glibmm
gmime gnome-applets gnome-backgrounds gnome-control-center gnome-desktop
gnome-desktop-sharp gnome-disk-utility gnome-doc-utils gnome-games
gnome-games-extra-data gnome-icon-theme gnome-keyring gnome-mag gnome-media
gnome-menus gnome-netstatus gnome-nettool gnome-panel gnome-power-manager
gnome-python gnome-python-desktop gnome-screensaver gnome-session
gnome-settings-daemon gnome-system-monitor gnome-terminal gnome-themes
gnome-utils gnome-vfs gnome2-user-docs gok gtk-engines gtk-sharp-2 gtk-vnc
gtk2 gtkhtml gtkmm gtksourceview2 gucharmap gvfs hamster-applet kdelibs
libatasmart libbonobo libbonoboui libgdata libgnome libgnomekbd libgnomeui
libgphoto2 libgtop libgweather libsigc++2.0 libsoup libsoup-gnome libunique
libwebkit libwnck libxklavier metacity mousetweaks nautilus opal orca pango
pangomm polkit polkit-gnome poppler poppler-glib ptlib pygobject pygtk
pygtksourceview2 seahorse seahorse-plugins sound-juicer tomboy totem
totem-plparser vinagre vino vte yelp zenity
[community]
perl-xyne-arch
:: Number of Packages: 117
:: Total Download Size: 298.48 MiB
:: Total Installed Size: 1015.32 MiB
:: Proceed with download? [Y/n] y
/usr/bin/aria2c: unrecognized option '--retry-wait=2'
Exception: [OptionParser.cc:149] Failed to parse command-line options.
aria2: Usage: aria2c [OPTIONS] [URL | TORRENT_FILE | METALINK_FILE]...
aria2: Printing options tagged with '#help'.
aria2: See -h option to know other command-line options(#basic, #advanced, #http, #https, #ftp, #metalink, #bittorrent, #cookie, #hook, #file, #xml-rpc, #experimental, #help, #all).
aria2: Options:
aria2: -h, --help[=TAG|KEYWORD] Print usage and exit.
aria2: The help messages are classified with tags. A tag
aria2: starts with "#". For example, type "--help=#http"
aria2: to get the usage for the options tagged with
aria2: "#http". If non-tag word is given, print the usage
aria2: for the options whose name includes that word.
aria2: Possible Values: #basic, #advanced, #http, #https, #ftp, #metalink, #bittorrent, #cookie, #hook, #file, #xml-rpc, #experimental, #help, #all
aria2: Default: #basic
aria2: Tags: #basic,#help
aria2: Refer to man page for more information.
--> All downloads have finished successfully
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (118): glib2-2.22.2-1 pygobject-2.20.0-1 pygtk-2.16.0-1 gnome-menus-2.28.0.1-1 atk-1.28.0-1
pango-1.26.0-1 gtk2-2.18.2-1 eggdbus-0.5-1 polkit-0.94-1 gconf-2.28.0-1
libbonobo-2.24.2-1 gnome-vfs-2.24.2-1 libgnome-2.28.0-1 libbonoboui-2.24.2-1
gnome-keyring-2.28.0-1 libgnomeui-2.24.2-1 gnome-python-2.28.0-1 libsoup-2.28.0-1
libsoup-gnome-2.28.0-1 libgweather-2.28.0-1 evolution-data-server-2.28.0-1
gnome-desktop-2.28.0-1 libwnck-2.28.0-1 gnome-panel-2.28.0-1 alacarte-0.12.4-2
at-spi-1.28.0-1 gmime-2.4.10-1 totem-plparser-2.28.1-1 libunique-1.1.2-1
brasero-2.28.1-2 libgtop-2.28.0-1 bug-buddy-2.28.0-1 gnome-icon-theme-2.28.0-1
cheese-2.28.0.1-1 conky-1.7.2-2 consolekit-0.3.1-1 dasher-4.10.1-2
gnome-python-desktop-2.28.0-1 deskbar-applet-2.28.0-1 devicekit-power-010-1
ptlib-2.6.5-1 opal-3.6.6-1 libsigc++2.0-2.2.4.2-1 ekiga-3.2.6-1 eog-2.28.0-1
libwebkit-1.1.15.1-1 epiphany-2.28.0-1 poppler-0.12.0-1 poppler-glib-0.12.0-1
evince-2.28.0-1 libgphoto2-2.4.6-3 sg3_utils-1.27-2 libatasmart-0.14-1
devicekit-disks-007-1 gnome-disk-utility-2.28.0-1 gvfs-1.4.0-1
evolution-exchange-2.28.0-1 evolution-webcal-2.28.0-1 file-roller-2.28.0-1
gcalctool-5.28.0-1 gconf-editor-2.28.0-1 libxklavier-4.0-1 polkit-gnome-0.94-1
gnome-session-2.28.0-1 gdm-2.28.0-1 gtksourceview2-2.8.1-1 pygtksourceview2-2.8.0-1
gedit-2.28.0-1 glibmm-2.22.1-1 gucharmap-2.28.0-1 libgnomekbd-2.28.0-1
gnome-applets-2.28.0-1 gnome-backgrounds-2.28.0-1 zenity-2.28.0-1 metacity-2.28.0-2
gnome-settings-daemon-2.28.0-1 gnome-control-center-2.28.0-1 gtkhtml-3.28.0-2
vte-0.22.2-1 gnome-desktop-sharp-2.26.0-2 gnome-doc-utils-0.18.0-1 clutter-1.0.4-1
clutter-gtk-0.10.2-1 gnome-games-2.28.0-1 gnome-games-extra-data-2.28.0-1
gnome-mag-0.15.9-1 gnome-media-2.28.1-1 gnome-netstatus-2.28.0-1
gnome-nettool-2.28.0-1 gnome-power-manager-2.28.0-1 gnome-screensaver-2.28.0-1
pangomm-2.26.0-1 gtkmm-2.18.2-1 gnome-system-monitor-2.28.0-1 gnome-terminal-2.28.0-1
gtk-engines-2.18.4-1 gnome-themes-2.28.0-1 gnome-utils-2.28.0-1 yelp-2.28.0-1
gnome2-user-docs-2.28.0-1 gok-2.28.0-1 gtk-sharp-2-2.12.9-1 gtk-vnc-0.3.9-1
hamster-applet-2.28.0-1 kdelibs-4.3.2-4 mousetweaks-2.28.0-1 nautilus-2.28.0-1
openssh-5.3p1-1 orca-2.28.0-1 perl-xyne-arch-0.82-2 seahorse-2.28.0-1
seahorse-plugins-2.28.0-1 sound-juicer-2.28.0-1 tomboy-1.0.0-1 libgdata-0.4.0-1
totem-2.28.1-1 vinagre-2.28.0.1-1 vino-2.28.0-1
Total Download Size: 298.48 MB
Total Installed Size: 1017.04 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
glib2-2.22.2-1-x86_64 2.8M 718.0K/s 00:00:04 [##############################################] 100%
openssh-5.3p1-1-x86_64 849.0K 399.5K/s 00:00:02 [##############################################] 100%
:: Retrieving packages from extra...
pygobject-2.20.0-1-... 551.4K 207.3K/s 00:00:03 [##############################################] 100%
^Cygtk-2.16.0-1-x86_64 894.7K 370.1K/s 00:00:04 [################------------------------------] 35%
Interrupt signal received
Last edited by graysky (2009-10-12 20:55:38)

If you're going to use powerpill you should probably subscribe to the following thread:
http://bbs.archlinux.org/viewtopic.php?id=56583
Your answer is on the very last page, but in summary the problem is that the --retry-wait option is no longer supported in aria2 which you can see in the code you pasted.
/usr/bin/aria2c: unrecognized option '--retry-wait=2'
Xyne has already updated the code so you can either get the code from his site or wait for the mirrors to sync.

Thanks all for the great advice. Another question. If I use Entourage on my desktop Mac to access an email address I use on there, is it possible to be able to access my email on that same email address on my iPad either with or without Entourage?

Thanks all for the great advice. Another question. If I use Entourage on my Mac desktop to access my mail using an email address I have on there, is it possible to access my emails on that same email address on my iPad, either with or without using Entourage. Is there an Entourage app, or something I could use? Thanks...

Simply add the email account to Mail, no need for Entourage.
One word of warning, though, iPads tend to become community property (meaning anyone who uses your iPad can access your email). That is why I have zero email accounts on my iPad.
I use Entourage on my desktop as well, so going back and forth between Entourage and Mail (whether on your iPad or iPhone) is no problem.

Another Question...rotating on two axis

Hi again. Well I have yet another question...how do I set a translation to rotate on two axis? Like I know that I can do:
TransformGroup tg;
Transform3D t3d = new Transform3D();
t3d.setRotation(new AxisAngle4f(1f,0f,0f,(some angle)));
tg.setTransform(t3d);
for one axis (I just put the declarations in to show an example) but if I try to apply two set rotations or two Transform3D's it doesn't work...so how would I rotate on, say, both the x and the y axis? Thanks,
Compaq

in fact the best thing would be to get used to quaternions. I suppose some Java3D tutorials discribe it quite well.
If you really want to use rotation on axis you have two solutions :
create 2 Transform3D and apply the result
Transform3D t3dx = new Transform3D();
t3dx.setRotation(new AxisAngle4f(1f,0f,0f,(xangle)));
Transform3D t3dy = new Transform3D();
t3dy.setRotation(new AxisAngle4f(0f,1f,0f,(yangle)));
t3dx.mul(t3dy);
tg.setTransform(t3dx);
(hum, at least i suppose it would work ;)
or you can do that too :
Transform3D t3dx = new Transform3D();
t3d.setRotation(new AxisAngle4f(1f,yangle/xangle,0f,(xangle)));
tg.setTransform(t3d);
(in this case xangle must be != 0)
I'm not really sure it will work so please tell me if it works. I've tried to help you twice today so you can send me some bucks to the folowing address :
oh, ok mum i won't give our address on the internet ;)
c ya
GnG

Another question - I'm sorry!

I'm sorry to bother you guys with another question. =p Just a quickie- How exactly do I get a movie from a DVD onto my computer after putting it in the drive? This is probably another stupid question, haha. ^_^; But I honestly haven't a clue.
THANK YOU in advance!! =)

It may be a quick question... but there's certainly no quick answer to it.
The topic of DVD ---> iPod has been covered thoroughly in these forums already. There's literally hundreds of topics which answer your question for you.
I would suggest that you search through the forums to find your answer, rather than start a whole new topic with duplicate information.

Another question (master socket)

Sorry for another question, but this is a forum after all .
Tomorrow all being well I should receive my welcome pack and business hub and on Friday I should receive Infinity, however I need something answered before the installation begins on Friday.
When I moved in my master socket, well, it had no faceplate on the bottom half (just a test socket basically) so I got myself one of those ADSLNation faceplate things which fit to the bottom half of the master socket and work as a filter. My question is:
- Should I remove the ADSLNation faceplate, use a standard micro-filter instead and explain to the engineer (if he queries it) that when I moved in there was no faceplate on the lower half of the master socket?
... or ...
- Should I leave it as it is with the ADSLNation faceplate on the front (screws don't properly fit either so I didn't bother with screws for that)?
Just concerned that if I appear to have used the ADSLNation (in other words not official BT faceplate) instead of an official BT one then the engineer might make a fuss or something?
Many thanks.

I see. Thanks for the clarification everyone.
I'll either take it off before Friday morning and use a normal micro-filter, so that it has no opportunity to go missing with the engineer, or if I decide to leave it there I'll make sure the engineer doesn't take it with him (as it doesn't belong to him after all, since I purchased that from ADSLNation and may at some point in the future need it again, e.g. if I moved years later to a location where Infinity isn't currently supported).

Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from

Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from LR or my drive, I keep getting the message; "Disk burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone may know if there's anything I can do. Or could it be that my computer just can't handle it? Help!!! So frustrating!! I have a PC Lenovo computer, I don't know if this makes any difference. Any ideas? Thanks so much for your help!!!

Have you burned Discs with other programs using this computer? Are you certain that you have a drive that will burn discs?

Another question re:daisychaining lacie, canon, g5

I read the post from a few days ago about problems capturing while a lacie is plugged in at the same time that a Canon camcorder is plugged in and I have encountered the same problem (I am using FCE). I also read how someone said they have dealt with it, i.e., capturing to the internal, restarting, then moving the clips to the LaCie. I have done this (prior to reading this, not as a result of reading it), but encountered a problem. I lost everything.
I moved the captured clips to my LaCie--or actually, a copy of the clips was made when I dragged and dropped. I then went back and moved the "original" clips to the trash and emptied the trash. When I went to use the copied clips on the LaCie, they appeared to be there, but all the data was gone. In other words, I couldn't use them in the sequence I had begun. I had to go back and 'capture project' to get them all back. Major bummer.
So here's my question. When "moving" captured clips, render files, etc. from the internal drive to my LaCie, they don't appear to be truly moving, just copying. Is there a way to move the original files so that I'm not having to move anything into the trash? I've been working on an opera on the internal drive and now have run out of space halfway thru rendering (I so knew this was coming!). I've "moved" (copied) all the captured clips and render files to my LaCie and subsequently dragged the "originals" to the trash in an effort to free up space. I am now petrified to empty my trash. I'm scared that my two-hour opera that took six hours to capture and another week to put together will be lost completely. Can anybody help???
Another question: is there another brand of external hard drive that is compatible with my Canon GL2? I'd so love to just be able to capture right to the external...
Thanks!!!
Heather
iMac G5 Mac OS X (10.4.2)

Hi Heather.
I don't know what happened to your clips but it is certainly not normal!
When you drag and drop to your LaCie you are making a perfect byte for byte copy of your originals. They are identical.
There is no way you can "move" your originals to another HD and have nothing left to trash.
What I suggest is do a little test - capture five minutes of video and copy it across. Delete the original files and try a few minutes of editing - a few cuts, several transitions and effects to check that everything is OK.
Ian.

Another question - This time about CoverFlow

Hi again.
Now that I feel better about my previous problem I have another question: I ripped some really old LPs from my personal collection to mp3 format and transferred them to my iPod. Those LPs are really obscure and info about them on the Net is virtually inexistent. I scanned the LP covers (a tedious process since my scanner isn't big enough to hold the whole cover) and embedded the pictures into the audio files. For some time, they appeared OK within CoverFlow, but now they've been replaced by the two sixteenth notes symbol. I've tried synchronizing my iPod with cover art disabled and then enabling it again-resyncing, changing the images format to jpg to bmp and nothing works. I think I'd download a different image file from the Net and use it instead, but again, nothing can be found about these LPs. Is there a solution for this aside from rescanning the covers? (Again, it would be OK for me if I hadn't to join and fix images using PhotoShop since I can't scan the whole cover at once). Thank you again!

You do not say what the image resolution of your scanned artwork is but, I recently read a post stating that too high resolution can cause problems. Try changing the resolution of your final images to something smaller than 500x500. You should be able to do this in PhotoShop without rescanning the covers.

Hi I'm Barb I have another question - thanks to Eric Root was able to install OSX - but had problum when it wanted to set everything up beCause I forget my login info so I put it thru as No Sign In - I got my info and would like to have OS X set itself up

Hi I'm Barb I have another question - thanks to Eric Root was able to install OSX - but had problem when it wanted to set everything up because I forget my login info so I put it thru as No Sign In - now I have my info and would like to have OS X set itself up can I get back to that setup point? and of course how? Thanks again Eric

Hi Eric -As to both questions I must tell you how relieved you made me, I've been on mac's since 1990? and this is truthfully the first time I've received a intelligent understandable response without have to go through 3 or 4 people - You are really Great - hope you won't mind my coming back to you if I need to. Thanks Again - Oh by the way I did what you said and did it manually easier and safer. Barb

Another question about gmail

I just posted a question about adding gmail and it was answered. Now, I have another question, I added the new gmail account. It shows in the mail preferences under accounts. Incoming mail addressed to gmail comes to the Archive Box. But I still can't send mail by gmail because in the drop down menu on the email it only lists my other two accounts. Gmail is not an option. I highlighted gmail in the account list and it showed that as the account in use. But, still there was no gmail option on the email form in the sender box. How do I fix that?

You need to look at and read over these very carefully.
http://support.apple.com/kb/TS3276
The link above is about sending issues. The one below is about setting up or confiquring new e-mail.
http://support.apple.com/kb/HT1277
Good Luck to you and welcome to the Discussions.
Don

Another questions of error -61017

Similar Messages

Maybe you are looking for