Another RAW Query

Hi There.
Another RAW query. I have PS CS4 Extended 11. I have tried to open RAW (NEF) pictures from my NIKON D3100. I get the error message 'Could not complete your request because it is not the right kind of document'. I have tried downloading the latest update. I currently have Camera RAW Version 5.7.0.213. I have also downloaded the DNG converter but I still get the same error. I am using Windows 7 on a laptop.
Please help, otherwise no RAW Photography for me!
Regards Mike.

You need at least ACR 6.3 and you can not get there with CS4. You either have to upgrade to CS6 or CC, or use the latest DNG converter.

Similar Messages

How can I copy datafile (from one Raw device) to another Raw device ???

can anybody tell me how do i copy/move one datafile from one raw device to another raw device.... ?
I am having AIX 5.3 with SAN.
Pls. help me...
regards,
Star Nirav

Hello Hans,
Currently I am using via RMAN... Want to know which one help me....? Is there any size limitation via dd command ? Can I use iocopy instead of dd in AIX ?
man dd

How to Copy RPT of one BEX query to another Bex Query

Hi,
I have a Crystal Report-A1 based on one Bex Query ZABC_1. I also have another Bex Query with same output and source named ZABC_2.
Now i want the to copy A1 to A2 and have A2 referring to ZABC_2.
The only difference between the 2 queries is the selection option paramenters.
Please let me know any way forward on this.
Points will be awared for useful replies.

Hi Rajesh J Salecha,
What I understood is like :
You have two queries and both gives same results but one of the query having a parameter.
You have one report which is using query1. Now you want that report to be copied as Report2 and use Query2 instead of Query1.
If the this is the issue, then you copy Report1 as Report2 and go in Database and change the Data source location to Query2.
Hope this will help you. If my understanding is wrong then give us the work flow.
Thanks,
Sastry

Spatial Query that uses Result of another Spatial Query

Hi all,
I am using the SDO_DIFFERENCE Operator to return the difference between a query window and an intersection geometry. This is fine and i get an object back that is cast to a STRUCT using the SDO API. I want then to use this (returned)object in another SQL query that uses the SDO_RELATE Operator. The problem is that i dont know what type it needs to be so that the SDO_RELATE operator will accept it as a valid argument. Has anyone done this before or seen anything like it? Any help will be very much appreciated.
Keith.

Thanks for your help,
I have done the following steps, but i still dont understand why it doesnt work.
CREATE TABLE val_results (sdo_rowid ROWID, result varchar2(1000));
CALL SDO_GEOM.VALIDATE_LAYER_WITH_CONTEXT('SHAPES','SHAPE','VAL_RESULTS');
SELECT * FROM val_results;
1 null     Rows Processed <3>
2 AAARDDAAEAAAAA+AAA     13348 [Element <1>] [Ring <1>]
3 AAARDDAAEAAAAA+AAB     13367 [Element <1>] [Ring <1>]
SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005)
FROM shapes c;
3     TRUE
2     13348 [Element <1>] [Ring <1>]
1     13367 [Element <1>] [Ring <1>]
If my rectangle and polygon is still invalid, can someone tell me why they are invalid. And how can i make them valid?
Thanks.
UPDATE:
I have solved Polygon issue.
In Spatial Developer's Guide it says:
Simple polygon whose vertices are connected by straight line
segments. You must specify a point for each vertex; and the
last point specified must be exactly the same point as the first
(within the tolerance value), to close the polygon. For
example, for a 4-sided polygon, specify 5 points, with point 5
the same as point 1.
I have added a point to polygon which is same as first point. Now, it can find the point in polygon.
INSERT INTO shapes VALUES (4, 'Polygon', SDO_GEOMETRY(2003, NULL, NULL, SDO_ELEM_INFO_ARRAY(1,1003,1), SDO_ORDINATE_ARRAY(306,193,130,441,489,653,88,183,442,354,306,193)));
But, when i run this query again:
SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005) FROM shapes c;
4     13349 [Element <1>] [Ring <1>][Edge <4>][Edge <1>]
3     TRUE
2     13348 [Element <1>] [Ring <1>]
1     13367 [Element <1>] [Ring <1>]
it doesn't say TRUE like it did for Circle ??
Edited by: WhiteScars on Jan 4, 2010 12:45 AM

Pass the result of a SQL Query as table_name for another SQL Query

Hi All,
How to pass the result of a SQL Query as parameter to another SQL Query
Eg: I am doing the steps below.
1) select distinct table_name as TAB1 from all_tab_cols where table_name like 'T_%' and column_name like '%XYZ'
2) I want to pass the table_name from step 1 above as parameter to another query "select * from TAB1"
Thanks

Naveen B wrote:
Hi All,
How to pass the result of a SQL Query as parameter to another SQL Query
Eg: I am doing the steps below.
1) select distinct table_name as TAB1 from all_tab_cols where table_name like 'T_%' and column_name like '%XYZ'
2) I want to pass the table_name from step 1 above as parameter to another query "select * from TAB1"
ThanksYou should craete PL/SQL code with cursor which will accept a parameter and call that cursor inside the first one
But if the first sql returns only one row, you can do it with simple sql code
select * from (select distinct table_name as TAB1 from all_tab_cols where table_name like 'T_%' and column_name like '%XYZ')- - - - - - - - - - - - - - - - - - - - -
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Using AppleScript for launch a raw-query Spotlight search?

As per usual with my limited scripting skills, I am finding the apparently simple stuff rather difficult to achieve.
My problem with Spotlight is that I want to use the same type of raw query repeatedly, but I want to avoid the tedium of having to:
1) open my saved search
2) choose "Show Criteria" to make the saved raw query visible
3) edit the text field containing the raw query, where the visible stuff is not what I want to edit, so I have to scroll to the right within that tiny field
So my idea would be to design a simple UI with AppleScript that
1) pops up a dialog asking for a phrase to search
2) launches a Spotlight search using the raw query:
kMDItemTextContent=="xxx*"
where "xxx" is the phrase that I am searching for, and opens a Finder window with the results of that search.
My reason for wanting to do this is that, by default, a search for an exact phrase with Spotlight fails to return matches that contain the plural form when the searched phrase is a singular.
See:
http://www.betalogue.com/2010/05/07/spotlight-plural/
http://www.betalogue.com/2010/05/11/spotlight-phrase/
for more information about the background for this.
Would this be relatively easy to do with AppleScript?
Thanks in advance.
Pierre

Hi
Pierre Igot wrote:
Am I correct in assuming that this means that what I wanted could not just be achieved with AppleScript and required a Perl script?
Message was edited by: Pierre Igot
A smart folder is an XML file (PLIST), you can edit it in many ways.
It's possible with other shell commands (sed or awk).
But perl works seamlessly with extended characters (ASCII > 127)
Also it's possible with AppleScript commands (open for access, read, write, close access), or with *property list file* in System events
But it requires more lines of code.
Here's the script :
global a_text
set smartFolder to "/Users/jack/Library/Saved Searches/Recherche dans “Bureau”.savedSearch"
set a_text to text returned of (display dialog "Enter a phrase to search" default answer "")
if a_text contains """ then
set a_text to findAndReplace(""", "\"", a_text)
end if
tell application "System Events"
set TheXML to property list file smartFolder
repeat with i in (get property list items of contents of TheXML)
set t_name to name of i
if t_name is "RawQuery" then
tell i to set value to my replace_text(get value)
else if t_name is "SearchCriteria" then
tell property list item 2 of property list item "displayValues" of property list item 1 of property list item "FXCriteriaSlices" of i to set value to my replace_text(get value)
else if t_name is "RawQueryDict" then
tell property list item "RawQuery" of i to set value to my replace_text(get value)
end if
end repeat
end tell
set smartFolder to ((POSIX file smartFolder) as alias)
tell application "Finder"
activate
open smartFolder
end tell
on replace_text(t)
set x to the offset of "kMDItemTextContent==" in t
set L to length of t
repeat with i from L to 1 by -1
if character i of t = """ then
set y to i
exit repeat
end if
end repeat
return (text 1 thru (x + 20) of t) & a_text & (text y thru -1 of t)
end replace_text
on findAndReplace(tofind, toreplace, t)
set ditd to text item delimiters
set text item delimiters to tofind
set t to text items of t
set text item delimiters to toreplace
set t to t as string
set text item delimiters to ditd
return t
end findAndReplace

Another problem: query in oracle

Hello guys,
I have a problem in a SQL code in a program that uses a Oracle connection.
The code:
public class ConBol {
     public void getDataBol() {
          String sql = "SELECT * FROM DOCUMENT_FISC WHERE NRDOC_FISC = ?";
          try {
               Connection conn = new ConnectionFactory().getConnection();
               PreparedStatement stmt = conn.prepareStatement(sql);
               stmt.setInt(1, 3969);
               ResultSet rs = stmt.executeQuery();
               System.out.println("here -- ");
               while (rs.next()) {
                    System.out.println("---while--- ");
                    System.out.println(rs.getString(1));
               rs.close();
               stmt.close();
               try {
                    conn.close();
               } catch (SQLException ex) {
                    Logger.getLogger(ConBol.class.getName()).log(Level.SEVERE, null, ex);
          } catch (SQLException ex) {
               Logger.getLogger(ConBol.class.getName()).log(Level.SEVERE, null, ex);
}When my SQL is only "Select * from myTable", the resultSet get all the data and the "System.out" inside the "while", works, showing me the data.
When I put a "where" on my SQL, the resultSet returns nothing, and the column that I ask, has items inside and the query should return me at least one row.
I really don't know what more can I do to solve this problem.
The server is Oracle 11g.
I try in Windows 7 and Windows XP SP3.
I try to use 3 diferent oracle drivers: ojdbc6.jar , ojdbc14.jar and class12.jar.
I try Eclipse and Netbeans, PreparedStatement and Statement, table name and column name in uppercase and lowercase, with alias, with other users from DB and no one solve the problem.
The data base connection is ok. When I copy and paste the SQL on the SQLDeveloper, the query works fine and show me results.
The program don't give any errors or exceptions, but doesn't work when I have a "where something".
If I put "where 1=1" he works fine.
Any help??

Artur,
I make the tests that you ask me to do and it works!!!
The value returned from the "select distinct" work when I put him on the original query.
I just can't understand how can this work if the another value that I pass to the query exists in the table too.
How can one value that exists, don't return me nothing?
At least, now I can be sure that the code is alright.
Thank's a lot friend, for you and JSchell. I will make more tests to try understand how this can happen.
Edit: I try to count the rows of that table. In PLSQL Developer, the row count was 5860. In the java code was 4730.
Can be out of memory in the resultSet?
Edited by: Herick on Dec 29, 2009 2:34 AM
Edit2: Forget what I said. I use the "Select count" and the resultSet came with just one result, so can't be memory problem.
Edited by: Herick on Dec 29, 2009 2:39 AM

Can I pass a SAP query to another SAP query???

Hi Friends
In SAP Queries we can edit the existing query and we can save it as a new query. In the same way is there anyway to pass a query to another query? As per my knowledge, I don't think it is possible, I want give confirmation to my manager, before telling this to him, I want to reconfirm it from you experts.
Please guide me.
Regards
Praveen

No Rob,
He is talking about SAP Queries only, but he is not aware of SAP, he is from Dot Net. Thanks for your reply.
Regards
Praveen

Raw Query Help?!

Hello Everyone:)
My memory is failing me right now (grrr...) At one point I used to have a "recently modified" smart folder which used raw queries in order to find the stuff I wanted to but I deleted that folder (its gone) and I can't recall what raw queries I used.
First I remember having kMDItemLastUsedDate >= $time.today(-14) to narrow it down to files opened in the last 14 days (That's good)
BUT I also want to narrow it down to the applications that are used (for example: narrow it down to ".pages" files or "PDF" files because otherwise I'll have EVERYTHING I've opened in the last 14 days in the smart folder)
I hope I made myself clear as to what you wonderful people can help me with. Thank you!
PS: I remember the query being something like kMDItemKind but I don't remember the syntax for the last part (to specify what kind of file it was). Thank you!

DL the PDF at http://developer.apple.com/library/mac/#documentation/Carbon/Conceptual/Spotligh tQuery/Concepts/Introduction.html%23//apple_ref/doc/uid/TP40001843-BBCFBCAG

Updating from another table query

I have tried a merge query and I think I am not doing this right or for what I want to accomplish, it will not work. Here is the problem:
I have a lookup table
create table lkp1(
lkp_id number,
lkp_name varchar2(100));
and have a another table
create table test(
test_id number,
lkp_id number,
lkp_name varchar2(100));
I am trying to pull in the lkp_id value from lkp1 table into the test table. I have the lkp_name field in the test table so that I can reference back to lkp1 so that I can pull in the lkp_id value. How would I go about doing this if the lkp_name field in test table has the value duplicated over many rows. For example 5 records in the test table might have the lkp_name of 'ORACLE', and its lkp_id from lkp1 table is 25. How do I populate the lkp_id in the test table with the value from the lkp1 table, without specfiying in the where clasue ...lkp_name = 'ORACLE'. There has to be a way. I tried the merge query, and WOW...I was really off.
Please help!

scott@ORA92> -- test data:
scott@ORA92> select * from lkp1
2 /
    LKP_ID LKP_NAME
         1 name1
         2 Oracle
2 rows selected.
scott@ORA92> select * from test
2 /
   TEST_ID     LKP_ID LKP_NAME
        10            name1
        20            Oracle
        30            Oracle
3 rows selected.
scott@ORA92> -- update:
scott@ORA92> update test set lkp_id =
2 (select distinct lkp_id from lkp1 where lkp1.lkp_name = test.lkp_name)
3 where exists (select lkp_id from lkp1 where lkp1.lkp_name = test.lkp_name)
4 /
3 rows updated.
scott@ORA92> -- results:
scott@ORA92> select * from test
2 /
   TEST_ID     LKP_ID LKP_NAME
        10          1 name1
        20          2 Oracle
        30          2 Oracle
3 rows selected.

How do I reference columns in a report query from another report query?

In Apex 3.1 it is possible to generate a report on more than one query. I have read that these queries can be correlated, but I cannot find how in the documentation.
I go the Shared Components and create a new Report Query:
select * from dept
Then I click Add Query and I add:
select * from emp
How do I correlate these two queries (I want to join emp.deptno to dept.deptno) and have a nice hierarchicle XML-file.
Is it possible in Apex 3.1?
Dik Dral

Dik,
This type of query can't be build. The two queries are independent, you can't reference values in the first query from the second query. However you can reference page and application items - which won't help you all that much with this scenario though. You could also try combining the two queries into one, and then take care of the proper presentation in your template.
Regards,
Marc

Can we call a bex query from result of another bex query?

we have a requirement wherein client has asked us for bex reports
in a BEX report
multiple queries needs to be executed and the querues are dependent on their parent query
i.e.
result of query 1 works as input for query 2 and result of query 2 works as input for query 3..
is it possible??
kindly help.

Hi,
(If RRI is not exactly what you need)
Eg. for a scenario where we want to display all positions of documents where at least one position in a document fits given cretaria. You can try it using query/prequery construction.
In short:
Create two querries:
In the first query you set the criteria (the output will be a list of document nos that fits that criteria). For peformance reasons keep this query small.
In the second query give restriction on document number (replacement path with the first query as a parameter).
Regards, Leszek

Another Update Query

Could someone help please... Don't understand why this query says "... not properly ended":
UPDATE TBL1
SET TBL1.T1V1 = TMPTBL.TTV1, TBL1.T1V2 = TMPTBL.TTV2,
TBL1.T1V3 = TMPTBL.TTV3, TBL1.T1V4 = TMPTBL.TTV4,
TBL1.T1V5 = TMPTBL.TTV5, TBL1.T1V6 = TMPTBL.TTV6,
TBL1.T1V7 = TMPTBL.TTV7
FROM
(SELECT DISTINCT TBL2.T2V1, TBL2.T2V2, TBL2.T2V3,
TBL2.T2V4, TBL2.T2V5, TBL2.T2V6, TBL2.T2V7, TBL2.T2V8
FROM TBL2
INNER JOIN TBL3 ON
(TBL2.T2V8 = TBL3.T3V1 AND
TBL2.T2V2 = TBL3.T3V2 AND
TBL2.T2V4 = TBL3.T3V3)
WHERE (TBL2.T2V0 = 'OK') AND (TBL2.T2V8 LIKE 'A%')) TMPTBL
INNER JOIN TBL1 ON
(TMPTBL.TTV8 = TBL1.T1V8)
WHERE ((TBL1.T1V2 IS NULL) AND (TBL1.T1V5 IS NULL) AND
(TBL1.T1V6 IS NULL)) AND EXISTS
SELECT *
FROM
(SELECT DISTINCT TBL2.T2V1, TBL2.T2V2, TBL2.T2V3,
TBL2.T2V4, TBL2.T2V5, TBL2.T2V6, TBL2.T2V7, TBL2.T2V8
FROM TBL2
INNER JOIN TBL3 ON
(TBL2.T2V8 = TBL3.T3V1 AND
TBL2.T2V2 = TBL3.T3V2 AND
TBL2.T2V4 = TBL3.T3V3)
WHERE (TBL2.T2V0 = 'OK') AND (TBL2.T2V8 LIKE 'A%')) TMPTBL
I'm trying to update a table from the results of a join query of two other tables.
Thanks in advance
RCulp

Okay. I take it Oracle doesn't support subqueries in a from clause like some other dialects? I get a similar problem when I use the
UPDATE TBL1
SET (T1V1, T1V2...) =
(SELECT T2V1, T2V2...)
method which doesn't allow update of fields not in the subquery. BTW: one of the fields returned in the subquery is not updated so it can't be there.
Suggestions?

Exporting result of query to another input query (Write Cube )?

Hello BI experts,
Is it possible to send a result of a read cube / query to be saved into other write cube / query ?
If yes , how to do ?
thx in advance

Hello srini,
I am tring to update ODS from a query as per your suggestion.
But there is a Error
==========
Error in the definition of the analysis process: See long text
Node: Query 1
The technical field name KYF_0002 for field 4CKMVZCDCO7A6PK7FT0GB7WCV may only appear once per input or output structure
My quries is based on multiprovider and also has cell definition in it. Therefore i m not able to update result of query ods.
what should be done?
Thanks for your earlier siggestion.

Create table by another table query wid contraints

how can we create table by another table but wid all the constraints of that table means
create table emp_test as select * from emp
it will create the replica of emp table but not constraints so how can i creat table along wid constraints

Mushy wrote:
i cant do this i have more than 200 tables to create wid the create table statement so any simple method to create table including constrains of that table otherwise i have to make a lot of changes in this codee etcc etcc
thanks a lot for ur replyYou can automate it. Something to start with:
SET SERVEROUTPUT ON FORMAT WORD_WRAPPED
DECLARE
    v_new_def CLOB;
BEGIN
    FOR v_rec IN (select table_name,dbms_metadata.get_ddl('TABLE',table_name) def from user_tables where table_name in ('EMP','DEPT')) LOOP
      v_new_def := v_rec.def;
      FOR v_list IN (select table_name from user_tables where table_name in ('EMP','DEPT')) LOOP
        v_new_def := replace(
                             v_new_def,
                             '"' || USER || '"."' || v_list.table_name || '"',
                             '"' || USER || '"."' || v_list.table_name || '_TEST"'
      END LOOP;
      v_new_def := replace(
                           v_new_def,
                           '"PK_' || v_rec.table_name || '"',
                           '"PK_' || v_rec.table_name || '_TEST"'
      dbms_output.put_line(v_new_def);
    END LOOP;
END;
CREATE TABLE "SCOTT"."DEPT_TEST"
   (    "DEPTNO" NUMBER(2,0),
        "DNAME" VARCHAR2(14),
        "LOC" VARCHAR2(13),
         CONSTRAINT
"PK_DEPT_TEST" PRIMARY KEY ("DEPTNO")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536
NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE
"USERS" ENABLE
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576
MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
CREATE TABLE "SCOTT"."EMP_TEST"
   (    "EMPNO" NUMBER(4,0),
        "ENAME" VARCHAR2(10),
        "JOB" VARCHAR2(9),
        "MGR" NUMBER(4,0),
        "HIREDATE" DATE,
        "SAL" NUMBER(7,2),
        "COMM" NUMBER(7,2),
        "DEPTNO" NUMBER(2,0),
         CONSTRAINT "PK_EMP_TEST" PRIMARY KEY
("EMPNO")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
         CONSTRAINT
"FK_DEPTNO" FOREIGN KEY ("DEPTNO")
          REFERENCES "SCOTT"."DEPT_TEST" ("DEPTNO") ENABLE
   ) PCTFREE 10 PCTUSED 40 INITRANS 1
MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1
FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
PL/SQL procedure successfully completed.
SQL> SY.

Another RAW Query

Similar Messages

Maybe you are looking for