Another shuffle just QUIT ON ME while running. This is the 2nd one in 2 months???

Today, I was running with my shuffle conected to my shorts and first it start telling the song name (voiceover) every 10 seconds, then it told me the battery was "full"....or whatever it says when you have enough juice....then the music got scratchy and the whole thing quit on me. The green light will not even come on. When i got home, i tried plugging it into my mac and still no green light and not shuffle in my iTunes. I is like it is not even powering up.
My only thought is this and it is far fetched. I recently moved to Austin TX 3 months ago and I run 5 days a week in the morning time. However, it is much warmer here than in CO (where i moved from) and I am guessing maybe my excess sweat has some how "shorted" the connection. Again, this is no different than what or how i have worn my shuffle for years in Colorado...I am so mad and bewildered????
Any help would be great.
Can i send them back to apple for replacement since i bought them at Target? Help!@$#%@$^

Exactly the same situation happened to me yesterday. I live in Florida, I use the Shuffle while running, and I try to keep it away from sweat.
Any advise is welcome.

Similar Messages

An error occurred while running scripts from the package "mzm,stuhjljp.pkg".

I hope someone can help, I have now tried downloading Lion OSx 4 times and I keep getting this message: An error occurred while running scripts from the package "mzm,stuhjljp.pkg".
I go back to the app store and it kindly tells me it's installed. It's not quite simply it is nowhere to be found.
Nice one Apple for moving away from those reliable discs and causing pain, wasted productivity and a **** of a lot of frustration. $29.99 to annnoy the **** out of me, thanks.
Anyone have a solution that may be of assistance.

Mj, I can't offer much help but you may be able to use this method to "find" Lion OS X in the App Store again.
Hold down the "option" key while clicking on the App Store icon. Keep holding down the option key, then click on the "Purchased" tab at the top of the page.
With any luck the button to the right of Lion OS X will now say "install."
I'm having a similar problem reinstalling Lion, so don't be surprised if you try to reinstall and get the same error.
Good luck,
Contender

HT1222 hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package "mzps6175750011235388779.pkg"

hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package “mzps6175750011235388779.pkg”
can you please advise me what should i do to fix this

Some ideas.
https://discussions.apple.com/message/20034600#20034600

Help me to fix the error while running DBMaintain Against the Database Schema in ASE.

Hi All,
I am trying to install sybase mobiliser platform 5.1 SP 03.I am referring the following guide
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01871.0513/pdf/Mobiliser_Platform_Installation_Guide_5.1…
Now I have configured the ASE database server with default settings and now it is running fine.
Now my concerns are as follows:
1) I have executed the database schema (mobr5): 001_MONEY_drop_and_create_user.DDL with the help of linux command
isql -Usa -SASE1 -Phello@123 -i/opt/sybase/db/sql/001_MONEY_drop_and_create_user.DDL -o/opt/sybase/ASE-15_0/install/ASE1.log
How do I check the created database schema and user with default name 'mobr5'?
2) While running DBMaintain Against the Database Schema, I have followed the steps mentioned in the guide and made the following changes in the file dbmaintain.properties.ase
database.driverClassName=com.sybase.jdbc4.jdbc.SybDriver
database.url=jdbc:sybase:Tds:ASE1:5000/mobr5
database.userName=mobr5
database.schemaNames=mobr5
database.password=paybox
#Must be set if the driver is not packaged inside the scriptarchive or is present on the classpath
#e.g. /path/to/driver.jar
#database.driverLocation=/path/to/jconnect.jar
database.driverLocation=/opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase.jar
database.driverLocation=/opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-vanilla.jar
When I execute the script archives ,
java –jar /opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-driverless.jar -c /opt/sybase/db/sql/dbmaintain.properties.ase
java –jar com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-vanilla-driverless.jar -c dbmaintain.properties.ase
I get the following error:
So please help me to resolve the issues.

Hi All,
Issue is resolved and database has been updated successfully..
Error was in database .url field of dbmaintain.properties.ase file.
I have changed the database.url field from database.url=jdbc:sybase:Tds:ASE1:5000/mobr5
to database.url=jdbc:sybase:Tds:<Private IP of Linux instance>:5000/mobr5
Note:- I am installing mobiliser platform on AWS cloud.So I have made use of Private IP address of AWS Linux instance.

I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?

I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?

Which model iMac do you have? http://support.apple.com/kb/HT1758 How to identify iMac models
Which OS is currently installed?
Check out KB Articles: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
If not of the above works and you have AC, call them. Let them deal w/it. Otherwise, take your iMac down to your local AS or an AASP. Diagnostic testing is FREE!
You can also research for a solution on YouTube's "How To" website and iFixit.

Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

Hi! I have problems downloading and installing OS X Yosemite.
While downloading this message pops up:
An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
and in /var/log/install.log i can see:
MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n NSFilePath = preinstall;\n NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
does anyone have an idea about this?
thank you very much

Mucked up installation. If the installer app is still in /Applications, delete it and start over.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

An error occurred while running scripts from the package "ztb343812063996219254.pkg

i tried to upgrade my os lion 10.7.5 to os x yosemite on my macbook pro and in the middele of downloading I'm getting this notice: an error occurred while running scripts from the package "ztb343812063996219254.pkg
help me please…..
i think i have problem with the app store cause sometimes I'm getting more errors like error no 13 or 100
what should i do?

"An error occurred while running scripts from the package "DeveloperTools.pkg"

I'm trying install my xcode 4.2 and check log and this where there is problem
"An error occurred while running scripts from the package “DeveloperTools.pkg”

II found the answer elsewhere. I logged in from a diffent admin acount and the install went fine.

TS1292 I purchased a $25.00. Card, redeemed it on my IPAD, but it shows no money in my account. I went to the store I purchased it at but they to.d me I had to deal with ITUNES. This is the 2nd time it happened. As of now I will not buy another card or

I purchased a ITunes card for the amount of 25.00, after I redeemed it it showed no balance on my account. So I went to the store I purchased it and they told me I would have to contact ITunes, this is the 2nd time it has happened to me, and to tell you the honest truth, I don't think I will buy another card. Can you help me with this

I'm sure is something simple here. Most likely you're looking on the wrong account, or it's a refresh thing.
Check here to see what happened:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

Hello there, AntRambo.
The following Knowledge Base articles may provides some steps to go over for troubleshooting your issue:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
And also the following:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Particularly but not exclusively of note:
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices. Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

The original u201CBP_CONFIRMu201D is running and not the redefine one.

Hi,
In Component CRMCMP_BPIDENT,
I have enhanced the custom controller CRMCMP_BPIDENT/CuCoBuPa
and redefined the method u201CBP_CONFIRMu201D with my logic.
But when I run the IC web client the original u201CBP_CONFIRMu201D is running and not the redefine one.
Why ?
Thanks in advance.

Amit,
We have not yet transported our Enhancement Set through the landscape, but I suspect you will need to maintain the assignment (BSPWDV_EHSET_ASG) in each system for the reason you give.
Your created Enhancement Set (BSPWDV_EHSET_DEF) will still transport through, then you will need to go into table maintenance for BSPWDV_EHSET_ASG once the set has been transported into your QAS system, and then assign it to your QAS clients.
Many thanks,
Andrew Griffin.

I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "LR encountered error when reading its previous cash and needs to quit. LR will fix this problem the next time it loads.' I have loade

I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "Light room encountered error when reading its previous cash and needs to quit. light room will fix this problem the next time it loads.'
I have loaded light room several times and even exited computer for 8 hours. Still get error message

A search of this forum shows lots of threads where this issue of "error reading cache" is solved

TS1424 I keep getting an "err: 100000" while trying to download the 2nd part of an audiobook (all other 6 parts downloaded normally). What do I do?

I keep getting an "err: 100000" while trying to download the 2nd part of an audiobook (all other 6 parts downloaded normally). What do I do?

I'd report the issue to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

I just got it on tuesday and this is the first time I've tried to charge it.

I just bought it on tuesday. This is the first time I've tried to charge it. It says it's not plugged in.

You haven't said how you are trying to charge your iPad. But if you answer above indicates you are using the supplied 10W wall charger and it is not charging, you may have a defective charger. If you are near an Apple Store, go there and get a replacement.

My iPhoto is not working, it quit unexpecly and it shows this message- The application "iPhoto" unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again?

i can't open my iPhoto, it was working very slow and now its not working at all, when i try to open it it shows this message: The application “iPhoto” unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again?
how can i fix this problem?

There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Another shuffle just QUIT ON ME while running. This is the 2nd one in 2 months???

Similar Messages

Maybe you are looking for