Another standard to admin problem.... Help!

For some reason my account is now a standard account and I can't figure out how to change it to an admin. Yes, I tried doing Apple's article; I put the install DVD in and hit restart. Upon restart I pressed and hold the "C" or "Option" key, but my computer just shuts down whenever I do it (At the grey screen with the Apple logo...). Pls help!

Nevermind ^^
It magically worked on the last try instead of shutting itself down randomly. Hmm... perhaps my iMac's problem is randomly shutting down during installations such as Bootcamp and stuff(I gave up trying to find out why it would shut down during windows shut down). Meh, thanks anyways

Similar Messages

  • Camera (focus) problem - help?

    Duplicate post, please see: Camera (focus) problem - help?
    Message was edited by: Admin Moderator

    Warranty is valid only in country of original purchase. You have to return
    the iPhone to the US for evaluation. Either you return it personally or send
    it to a friend/relative/co-worker in the US to take into Apple. Apple will not
    accept international shipments for evaluation nor will Apple ship out of the
    country after repair/replacement.
    Have you tried the standard trouble shooting steps: restart, restore, restore
    as new iPhone?

  • In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section.  After doing so, I received a message that my event is already open with the same identifier as the new one I just creat

    In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section.  After doing so, I received a message that my event is already open with the same identifier as the new one I just created on the new disk.  It says the second document cannot be opened and to move one of these documents out of your Final Cut Events folder.  It also says to avoid this problem, copy events from within Final Cut Pro, but that is what I did in the first place.  What should I do to avoid the double opening conflict?

    What exactly are you doing and what version are you using with OS X 10.8?

  • Standard button image problem

    Hi,
    I've got a problem when I try to set Image to the button from standard components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine, unfortunately I need that component from standard.. any advice?
    thx.

    Hi,
    I've got a problem when I try to set Image to the button from standard
    components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine,
    unfortunately I need that component from standard.. any advice?
    thx.Standard button has problems with images due to a JSF issue. To work around the issue, remove leading / from the buttons image property and re-deploy. This should cause the standard button image to display correctly.
    Hope it helps,
    Lark

  • Itunes and Mac Pro Problem -- Help Please

    Having a really strange problem and could use some help.
    I've got a Mac Pro with my wife's Ipod attached. Updating songs on the Ipod has become very, very slow. Literally, it's taking hours to move over a couple of albums.
    Just out of curiousity, I hooked it up to a Macbook Pro in the house and everything was just fine. Tried reinstalling itunes on the Mac Pro and it didn't do it the trick.
    All machines are intel based. Other peripherals are working fine.
    Any suggestions? Thanks.

    slow iPod report - MacFixit
    iPod Update 2004-07-15 (#4): Slow transfers after update, solutions; Another fix for mounting problems
    Why reformat iPod in Disk Utility
    iPod Discussions
    Mac Pro 2GHz 4GB 10K Raptor 23" Cinema   Mac OS X (10.4.8)   WD RE RAID DW 4.0 APC RS1500 Vista

  • Enhancing standard (single select)search help for Multiple value selection

    Hi,
    Standard search help for Business Partner (in cProjects) allows only single value selection for input fields. I want to make this multiple selection.
    Is there a way to do it.
    I used an OVS and built a similar search but its difficult to get the standard options like saving to personal value list etc in it.
    It would be good if there is a way to modify the standard search help to allow multiple selection. Any ideas??
    Appreciate your help,
    Thanks,
    Sri
    Edited by: Sri on Sep 9, 2010 8:50 PM
    Edited by: Sri on Sep 9, 2010 8:52 PM

    As far as I know you can't make a standard ABAP dictionary search help return multiple entries - where you get this sort of functionality the searches don't use the standard Elementary search help framework (e.g. organisational structure searches)
    Given that the WDA search help relies on these dictionary based searches, I'd think very much that you couldn't enhance it to return multiple. how you could even return multiple entries into a single UI element input field is also confusing to me.
    I'd suggest creating a freely programmed value help, it would certainly take quite some effort to recreate those personal value lists etc, but it could be done - I don't like OVS, but that just me.

  • My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

  • I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

    I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad/iPod into Recovery Mode
    http://support.apple.com/kb/ht4097

  • IPad syncing problem - HELP!

    iPad sync problem - HELP!  I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)"  and yet I seem to have plenty of space on the iPad.  This just started today.  I even tried deleting some things to make even more room, but it didn't help.  Any ideas??? 
    I was thinking of restoring, but I've never done it...  should I? 
    thank you!

    Hello florafromnv,
    Welcome to Apple Support Communities.
    The following article addresses how to resolve the issues related to this message:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/TS1503
    Regards,
    Jeff D.

  • Why isn't my email verify even if I did it so many  times then it says your email is verify for another account can  someone please help me

    I created an apple ID with iTunes gift card
    Then i signed in
    I tried to download a game and it said that
    My email is not verifyed then I to verify it but
    It said that my email is already verifyed for another email
    Can someone please help me with this problem

    Make sure there is no other account using that email. (Try going to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ hitting Reset your password, and then enter the email address.

  • The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly.  Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

    The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly.  Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

    Yes, if you purchased it in an Apple store, they should be able to assist you.  Bring your MBP with you as well as the Drive.
    Ciao.

  • MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    This topic has been moved to Overclockers & Modding Corner.
    KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    Not that I am an expert o/c but here are some thoughts on the matter.
    My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
    This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from. 
    With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
    Hope this helps

  • Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

    Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Call Standard BSP from another Standard BSP

    Hi all,
    I would call a standard BSP (my case ACTIVITY BSP) from another standard BSP (OPPORTUNITY BSP) when change a predefined fields.
    I try to implement the following source code into the method IF_CRM_BSP_MODEL_ACCESS_IL~READ of the extended class, but nothing happens:
        DATA: url TYPE string.
        DATA navigation TYPE REF TO cl_bsp_navigation.
        DATA runtime TYPE REF TO cl_bsp_runtime.
        CALL METHOD cl_bsp_runtime=>get_runtime_instance
          RECEIVING
            runtime = runtime.
        CALL METHOD runtime->create_url
          EXPORTING
            application_name = 'CRMD_BUS2000126'
          RECEIVING
            url              = url.
        CREATE OBJECT navigation
          EXPORTING
            runtime = runtime.
        CALL METHOD navigation->goto_page
          EXPORTING
            url     = url.
    The previous code is correct to call another BSP?
    And where can I implement the code?
    Thank you very much.
    Giulio

    Hi,
      I am sending the code for the layout where you can write code to call a page or controller of a bsp from page.
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <htmlb:content design="design2003">
      <htmlb:page title = "first page ">
        <htmlb:form>
          <htmlb:textView     text          = "Material Details"
                              design        = "EMPHASIZED" />
          <br>
          <br>
          <htmlb:textView     text="Material"  design="STANDARD" ></htmlb:textView>
          <htmlb:dropdownListBox  id="Matnr"  table="<%= it_mara1%>"  nameOfKeyColumn="Matnr"
          nameOfValueColumn="Matnr"></htmlb:dropdownListBox>
          <br>
          <br>
          <htmlb:button       text          = "Press Me"
                              onClick       = "myClickHandler" />
           <br>
           <br>
           <htmlb:link id="link" text="Click Here"  reference="http://iga03019b.in.intelligroup.com:8000/sap/bc/bsp/sap/z_azaz_bsp_app6/display.htm">
           </htmlb:link>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    You write code for what to be displayed in the controller or oninputprocessing of a page of a called bsp.
    Regards,
    Azaz Ali.

Maybe you are looking for

  • SQL   Loader and Error ORA-01847/ORA-01839

    Hi, While using the direct loading in SQL-LOADER when we get the ORA-01847/ORA-01839 all the other records are getting errorred out. It goes fine with the conventional loading. Should I use some parameters or anything to make sure that all the other

  • Sun Java System Application Server  into Netbean 6.1

    Hi , I am new to Java community, I like to lean J2EE so I downloaded jdk-1_5_0_16-windows-i586-p and installed then I installed java-tools-bundle-update5-windows I am trying to do the initial setup and do the sample The Java EE 5 Tutorial See this tu

  • Adding Metadata to JPEG, EPS, PSD, TIFF

    Hi all, I would like to know how if is possible to a read and write metadata (basically Caption and Kewords fields) to a different kind of files (EPS with JPEG compression, TIFF, JPEG, PSD...) WITHOUT opening them in Photoshop. I need to manage all f

  • Strange Battery Malfunction

    Here is my situation... Recently my 3 1/2 year old powerbook G4 17 inch battery went out. When I would plug it in the plug adapter light would turn green then orange immediately. If i press the power button (just on quick press) it would turn green,

  • Request without Monitor Log: APO Request or Terminated Request Generation

    Hi, While loading data to ODS from the sources system there is new error request appearing in the ODS with following description: “Request without Monitor Log: APO Request or Terminated Request Generation” Unable to see the error details as this requ