Another strange behaviour: Horizontal stripes

Hello, since the last update, the display has started to behave strange. When scrolling down in Safari while surfing, various stripes around text and images appear and the only way to get rid of them is scroll the back out out of the screen and in again.
I suspect it's the display but it could also be Safari because it's happening only there.
Any clues?
Thanks for the help.
Message was edited by: Rheex

Jan,
It appears that your production system somehow believes that these are BW 3.5 web templates and / or queries. This results in the 3.5 web template being used, which displays as empty.
Firstly, I would check the settings within the individual iViews in both the production federated portal and the producer portal to ensure that the "Version" is set to "SAP Netweaver BI", not "SAP BW 2x 3x".
Secondly, I am uncertain as to how to configure the federated portal links to the producer portal, though is is possible that incorrect strings are configured to call the iView. The BI7 version should reference TEMPLATE. If it states TEMPLATE_ID then that will cause the BI3.5 template to be invoked - see this help: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Hope that helps,
David

Similar Messages

Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter

Hello there are discussions and questions around this community about network adapter dropping connection while system is running. But I have found unique problem with my network adapter driver.
I have tried to state my problem as clearly as possible. Please ask if any detail is required.
My network status shows no access on following occasions:
1. On alternate system wakeups.
eg:
a. System boots up
Internet accessible
no problem
b. I put system to sleep(first time) and wake it up
No access to internet !!!
When I check in network and sharing center not even adapter shows in disabled status.(See video from the link given below).
c. Without restarting system or without installing network adapter again, I put system to sleep again and wake it up (2nd time).
Internet accessible
d. I put system to sleep for (3rd time) and wakes it up.
No access to internet!!
If I put system to sleep again and wake it up definitly I get network access.
2. If I switch off the modem before windows shutdown completely or in the process of shutdown, next time when I boot system, even though the modem is switched on before booting the system, No internet access tooltip will be shown on network
sysbol.
Another strange behaviour is on no internet access status, I start installing adapter, and it loads required files and prompt me to click "next" and "click" install.
But the thing is before I go to "next" button, I will get network access as shown in this link
http://youtu.be/sPlXVEiYBeo. Ignore virtualbox adapter. Same behaviour was there when there is no vbox adapter. Same was happening in Windows 8 Pro, but not in windows 7, so that there is no H/W problem I think.
Any idea on how to fix this or any alternate solution ?

Hi,
Firstly, access your network adapter official website to get the proper driver applied to your system.
Then going to Control Panel > Device Manager, right click your adapter > Properties. Under the Power Management tab, make sure "Allow the computer to turn off this device to save power" checkbox unchecked.
If it still persists, try to disable "fast startup" as below steps:
1.In Control Panel, open the Power Options item.
2.Click the Choose what the power buttons do link.
3.Clear the Turn on fast startup (recommended) check box.
4.Click Save Settings.
Karen Hu
TechNet Community Support

Small horizontal stripes on the display during turning it off on iPhone 3G

I have used the iPhone 3G for two months now and today I have just noticed a quite strange problem on the display.
If I turn the iPhone on there are no anomalities everything works great but if I turn it in Standby-Mode there are always some black horizontal stripes appearing in the near of the middle of the screen..
They appear and disappear really quickly and they are looking like the barcodes but in the horizontal direction and always on the same place.
Sometimes I can not see them but more often I do.
Everything like Video or other functions of the phone are working really great but does anyone know if this behaviour of the display could be seen as normal because I hardly notice those stripes if the room in which I use the phone is dark...

Read here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue.

Cursor shows strange behaviour in 10.9.5

HI,
I'm using a 15" MBPr late 2013, i7, 16 GB RAM, 1 TB SSD, running on 10.9.5. Lately I registered a very strange behaviour of the cursor when using the built in trackpad. If hovering over one of the symbols in the bar at the upper right corner of the screen and then moving the cursor downward, the menu of the symbol on the right of the cursor pops up (not the one the cursor ist pointing on).
For example: the symbol for WiFi is located left from the one regulating the volume. When hovering over WiFi and moving downwards to activate/deactivate it, the volume-controle pops up ! If I want to use the WiFi, I have to hover over the symbol for bluetooth-connectivity instead....
Any idea whats happening here ?
Help is very much appreciated !
MIchael

OK, found the solution by myself. The reason seemed to be related to the resolution of the display. Changed it to another one (no matter which one), waited for the display to change and the changed the res back to optimal for display.
The cursor now works fine and exactly....
Really weird.

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour on text insert into a HTML pane

Hi all,
I am trying to fix a problem on inserting a span tag into an existing html page (in an EDITABLE JEditorPane).
The behaviour:
Assuming the cells in a table (3 rows, 2 columns) are numbered from 1 to 6, with cell one being the top left most, cell 2 top right, cell 3 middle left, etc.
1. Inserting the text "" in cell 4 causes during any attempt to later type into cell 5 the characters to be appended instead into cell 4, directly after the close span tag.
2. The insertion in the first place behaves strange. If I have the caret positioned for cell 5 so that I can insert there
(via the function void javax.swing.text.html.HTMLEditorKit.insertHTML(HTML Document doc, int offset, String html, int popDepth, int pushDepth, Tag insertTag) )
even though the caret position is visible in cell 5, the insertion seems to take place in cell 4.
I can sort of compensate for this by adding 1 to the offset. However, then when inserting into a line of text, for example, "the quick red fox jumped over the lazy dog"
I insert directly before the 'j' in 'jumped', the insertion looks like this "the quick red fox j..umped over the lazy dog"
So that is no solution.
IMPORTANT! Just to prove it is not the span tag causing the trouble, if this span tag already exists in a cell on 'Load' of the html file, the strange behaviour is not observed.
Something is going wrong here. It is me? Or is it a bug?
Please help!!
Here is a test app, and the test html you can use (place in current directory).
Please test like this:
1. run application (the html should be loaded into the pane)
2. the span tag is programmed to automatically insert at cell 4 (by using the +1 method on the insert)
3. another span tag was already existing in the html file, at cell 8
4. Attempt to type into cell 5
result: the text appears instead at cell 4
5. Type into cell 9
result: the text correctly is entered into cell 9
See the difference!!
Help!
The test java app:
package small.test;
import java.awt.BorderLayout;
import java.awt.Container;
import java.io.File;
import java.io.FileReader;
import java.io.IOException;
import java.io.StringReader;
import javax.swing.JEditorPane;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.SwingUtilities;
import javax.swing.text.JTextComponent;
import javax.swing.text.html.HTML;
import javax.swing.text.html.HTMLDocument;
import javax.swing.text.html.HTMLEditorKit;
import javax.swing.text.html.parser.ParserDelegator;
public class HtmlInsertTest extends JEditorPane
 public HtmlInsertTest()
 public static void main(String args[])
 JFrame frame = new JFrame("Loading/Saving Example");
 Container content = frame.getContentPane();
 frame.setSize(600, 600);
 final HtmlInsertTest editorPane = new HtmlInsertTest();
 editorPane.setEditable(true);
 JScrollPane scrollPane = new JScrollPane(editorPane);
 content.add(scrollPane, BorderLayout.CENTER);
 editorPane.setEditorKit(new HTMLEditorKit());
 JPanel panel = new JPanel();
 content.add(panel, BorderLayout.SOUTH);
 frame.setSize(600, 600);
 doLoadCommand(editorPane);
 editorPane.insertHTML("inserted text", 84);
 frame.setVisible(true);
 public static String getHTML()
 return
 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">"+
 "<HTML>"+ "<HEAD>"+
 " <META HTTP-EQUIV=\"CONTENT-TYPE\" CONTENT=\"text/html; charset=utf-8\">"+
 " <TITLE></TITLE>"+
 "</HEAD>"+
 "<BODY LANG=\"en-AU\" DIR=\"LTR\">"+
 "This is a test xhtml document. "+
 " "+
 " "+
 " "+
 " Here is a table:"+
 " "+
 " "+
 " "+
 " <TABLE WIDTH=100% BORDER=1 BORDERCOLOR=\"#000000\" CELLPADDING=4 CELLSPACING=0>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>"+
 " It has"+
 " </TD>"+
 " <TD WIDTH=50%>"+
 " 2 columns"+
 " </TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>And 4 rows</TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%>existing text</TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " </TABLE>"+
 " "+
 " "+
 " "+
 " "+
 " "+
 " "+
 " We will test the drag and drop"+
 " functionality with this document. "+
 " "+
 " It will be loaded with the hlml editor."+
 " "+
 " "+
 " "+
 " "+
 " </BODY>"+
 " </HTML>";
 public static void doLoadCommand(JTextComponent textComponent)
 StringReader reader = null;
 try
 System.out.println("Loading");
 reader = new StringReader(getHTML());
 // Create empty HTMLDocument to read into
 HTMLEditorKit htmlKit = new HTMLEditorKit();
 HTMLDocument htmlDoc = (HTMLDocument)htmlKit.createDefaultDocument();
 // Create parser (javax.swing.text.html.parser.ParserDelegator)
 HTMLEditorKit.Parser parser = new ParserDelegator();
 // Get parser callback from document
 HTMLEditorKit.ParserCallback callback = htmlDoc.getReader(0);
 // Load it (true means to ignore character set)
 parser.parse(reader, callback, true);
 // Replace document
 textComponent.setDocument(htmlDoc);
 System.out.println("Loaded");
 catch (Exception exception)
 System.out.println("Load oops");
 exception.printStackTrace();
 finally
 if (reader != null)
 reader.close();
 public void insertHTML(String text, int offset)
 SwingUtilities.invokeLater(new insertAction(this, text, offset));
 class insertAction implements Runnable
 String text = "";
 int offset = 0;
 JEditorPane jEditorPane1 = null;
 public insertAction(JEditorPane _jEditorPane1, String _text, int _offset)
 jEditorPane1 = _jEditorPane1;
 text = _text;
 offset = _offset;
 @Override
 public void run()
 HTMLDocument doc = (HTMLDocument)jEditorPane1.getDocument();
 HTMLEditorKit kit = (HTMLEditorKit)jEditorPane1.getEditorKit();
 try
 System.out.println("reading from string reader");
 kit.insertHTML( doc,
 offset,//+1
 text,
 0,//0
 0,//0
 HTML.Tag.SPAN);
 System.out.println(jEditorPane1.getText());
 catch (Exception e)
 System.out.println("error inserting html: " + e);
}Edited by: svaens on Jul 16, 2009 6:34 PM
fix another stuffed up attempt at a SSCCE.

Well, I know nothing about HTML in JEditorPanes. I have never been able to figure out how insertions work.
My comment was a warning to others. Some people (like me) avoid answering posting of this type for reasons given in the JavaRanch link. Others will answer anyway. Other might first check the other site to see if they are wasting there time, but they can only do that if a link was posted with the original question.
The only suggestion I have is to repost the question, (since this posting is now completely off topic) making sure to then respond to this posting stating that a fresh question has been asked so you don't get a discussion going on in two places.

IPhoto: strange behaviour with preview thumbnails

Is there a simple way in iPhoto 8 to rebuild the thumbnail database?
I recently noticed a strange behaviour iPhoto 8 has with previews: In some of my event categories, iPhoto does not display the correct preview thumbnail of the picture, but a preview thumbnail of another event. When I click on the thumbnail, it reloads the appropriate preview and it does not happen again - with that picture. Also, if I double click an event to open it, the small thumbnail of the event's key photo that is to be displayed in the title bar (next to the All Events button) is not always correct.
Thank you for your help!
Stefan

I have similar problems (lately) with iPhoto 6.0.6 -- thumbnails do not equal the images they 'thumbnail' of.
Sometimes when it opens, it (recently) asked me to rebuild the thumbnails, but not always.
Can I force a thumbnail rebuild using the command you gave - Apple-option while opening iPhoto? In iPhoto 6.0.6 this primarily forces a new selection of a library.

Photosmart C4780 Mac OS 10.9 scan clear on preview, but saves black with white horizontal stripes

I'm having difficulty figuring out why my scanner all of the suddens saves all scanned documents (.pdf, .jpeg, .png) as a black document with white horizontal stripes. The preview scan from the utility looks fine.
I recently updated my Mac to OS 10.9.2
I have uninstalled all HP utilities and drivers and reinstalled them with all updates.
Printing works fine, as does copying.
I scan a lot of forms, so this is disconcerting.
Thanks for any help.
PS: I see that this is an issue that seems to have been solved for others, but my printer/scanner is not one of the ones listed. Is there another driver to try?
More info: Here is the error code log:
E [04/May/2014:21:42:15 -0500] Unknown directive BrowseAllow on line 23 of /private/etc/cups/cupsd.conf.

Hi,
This is a known compatibility issue with the HP Scan application, which is not supported on 10.9.
You may scan using Apple's Image Capture or Preview as listed as a workaround in the following document, a Full Feature Software for your printer is not available for the operating system:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c04028214&lc=en&jumpid=reg_r1002_us...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Strange behaviour on reading procfs

Hello,
I have a strange behaviour reading process table from procfs. Some processes have a resident size and image size of 0 (zero). So I wrote a little test program and generated a 32bit binary. It gave me the same result. After I made a 64bit binary and this brought the expected results. Do anyone of you have an idea what i'm making wrong. Below you can find an output example and the code of the program.
Every answer is appreciated
erinda
pfs.s32pid name nlwp %cpu %mem image resident
1 init 1 0.00 0.03 2368 1184
7 svc.startd 13 0.01 0.04 8696 1720
649 snmpd 1 0.00 0.08 0 0
24151 oracle 11 0.00 7.01 0 0
pfs.s64pid name nlwp %cpu %mem image resident
1 init 1 0.00 0.03 2368 1184
7 svc.startd 13 0.01 0.04 8696 1720
649 snmpd 1 0.00 0.08 9352 3440
24151 oracle 11 0.00 7.01 330240 286664
and here the program
int main(int ac, char * av[])
struct dirent * procEntry;
char prcPath[PRARGSZ];
psinfo_t prcInfo;
pid_t pid;
int rtc;
DIR * procDir = opendir("/proc");
if(procDir == NULL)
printf("opendir(/proc) failed\n");
return 1;
printf(" pid name nlwp %%cpu %%mem image resident\n");
printf("----------------------------------------------------------\n");
rewinddir(procDir);
while(procEntry = readdir(procDir))
if(procEntry->d_name[0] == '.' || // skip "." and ".."
procEntry->d_name[0] == '\0') // skip empty name
continue;
pid = atoi(procEntry->d_name);
if(pid == 0 || pid == 2 || pid == 3)
continue;
size_t size = sizeof(psinfo_t);
sprintf (prcPath, "/proc/%s/psinfo", procEntry->d_name);
int pprocfs = open(prcPath, O_RDONLY);
if (pprocfs < 0)
return 2;
else
ssize_t bytesRead = read(pprocfs, &prcInfo, size);
if (bytesRead != size)
return 3;
close (pprocfs);
printf(" %5d %-15s %4d %5.2f %5.2f %8lu %8lu\n",
prcInfo.pr_pid,
prcInfo.pr_fname,
prcInfo.pr_nlwp,
(float)(100.0 * prcInfo.pr_pctcpu / 0x8000),
(float)(100.0 * prcInfo.pr_pctmem / 0x8000),
(ulong_t)prcInfo.pr_size,
(ulong_t)prcInfo.pr_rssize);
}

Hello.
If a 32 bit process reads from /proc different structures are returned as if a 64 bit process reads the same files.
In the OpenSolaris sources this can be seen in http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/fs/proc/prvnops.c#2600 (line 2600).
Unfortunately a 32 bit task cannot get all information about a 64 bit task - at least not in current Solaris version. I think this is a problem to be solved by Sun...
Martin
If anyone from Sun involved in the development of the procfs reads this: My proposal is:
/proc/xxx/psinfo32 and psinfo64 and a symlink psinfo. The symlink's destination depends on the reading processes data model....
(The same should be done with all files (lwpinfo...) in /proc).
Another idea is a special IOCTL that controls if a 32 bit task wants to access the 64 bit structures...

FIM Load Balancing and SPN's - Strange behaviour

I have a FIM setup in a domain
I have mycorp.com and a domain in the same forest contractor.mycorp.com (fictional setup)
I have 2 servers built in the contractors.mycorp.com domain
Id1
Id2
Id1 has the Service and portal on wss3 in SharePoint farm mode, Sp central admin is on this as well
Id2 has the service and is a load balanced SharePoint farm.
I have NLB setup and working the service name is identity.mycorp.com pointing at the IP of the NLB
I have a CNAME identity pointing at identity.mycorp.com
Identity.mycorp.com is used as the name of the Service and the Portal.
In the ApplicationHost.config I have
<system.webServer>
 <security>
 <authentication>
 <windowsAuthentication enabled="true" useKernelMode="true"
useAppPoolCredentials="true" />
 </authentication>
 </security>
</system.webServer>
I have kernel mode enabled, and I have Windows authentication enabled in the IIS console on id1 and id2.
The app pool credentials are a domain account SPService for SharePoint Service, the app pool is set on both id1 and id2 servers. The root domain account mycorp\SPService us used.
In
c:\inetpub\wwwroot\wss\VirtualDirectories
I have set
<resourceManagementClient
requireKerberos="true"
I have registered the alternate URL mappings for SharePoint as
Identity
Identity.myCorp.com
I have registered SPN's for
Setspn –S FIMService/identity.myCorp.com myCorp\FIMService
Setspn –S FIMService/identity myCorp\FIMService
Setspn –S HTTP/identity.myCorp.com myCorp\SPService
Setspn –S HTTP/identity myCorp\SPService
I have configured delegation for both accounts in ADUC for the identity.mycorp.com
So all is well and I installed everything fine.
Now my problem is that if I go to id1 and browse to http://identity/identitymanagement I get redirected , and authenticated with my admin account to
http://id1/IdentityManagement/default.aspx
On id1 if I go to http://identity.myCorp.com/identitymanagement I get prompted for credentials, when I enter myCorp\FIMAdmin and my password I get redirected to the portal at
http://id1/IdentityManagement/default.aspx
If I try and authenticate to any of the previous URL's from other machines in my domain, including the load balanced box id2 I get "HTTP Error 401. The requested resource requires user authentication."
Even if I try and browse to
http://id1/identitymanagement from another machine I am getting 401. Only on
http://id1 am I getting a result, even if there is a prompt.
I am sure my SPN's are fine, there are no duplicate SPN's , I checked with the -x switch
So my load balanced portal and service are not working as I would have thought , I have looked at
http://blogs.msdn.com/b/webtopics/archive/2009/01/19/service-principal-name-spn-checklist-for-kerberos-authentication-with-iis-7-0.aspx
http://social.technet.microsoft.com/Forums/en-US/484faae8-4df6-4b81-8b2d-9d75d5258e4f/fim-portal-http-error-401-the-requested-resource-requires-user-authentication?forum=ilm2
http://social.technet.microsoft.com/wiki/contents/articles/4473.fim-http-error-401-the-requested-resource-requires-user-authentication.aspx
http://setspn.blogspot.ie/2010/06/kerberos-basic-troubleshooting-tip-3.html
The only thing that I can think of is that the machine is in the contractors.myCorp.com domain which makes the machine
unique from where the SPN's are registered, but if that was the case then browsing to the portal from
http://id1 would certainly fail.
Can anyone see anything wrong with my approach ?
Normally I find SharePoint a pain, but this week it seems to be this.
When I ran the fim service install I specified identity.myCorp.com as the name of the server
Rob

In my Load Balanced setup it helped a lot (on some strange behaviours) when I set up Load Balancer to keep session on one server.
Borys Majewski, Identity Management Solutions Architect (Blog: IDArchitect.NET)

Strange behaviour whit custom JTextField and JToolTip

Hello everyone. I hope I'm writing in the right section and sorry if I did not search for this issue but I really don't know which keywords I should use.
I'm using NetBeans 6.1 on WinXP and JDK 1.6.0_07, I have a custom JTextField with regex validation: when you type something that don't mach regex it shows a JToolTip. This JToolTip should disappear when the text typed is finally correct, or when the textfield loses focus (see code below).
import java.awt.Component;
import java.awt.Dimension;
import java.awt.Point;
import javax.swing.JToolTip;
import javax.swing.Popup;
import javax.swing.PopupFactory;
public class MyJTextField extends javax.swing.JTextField implements FormComponent
private static Popup popUpToolTip;
private static PopupFactory popUpFactory = PopupFactory.getSharedInstance();
private boolean isValidated = false;
private String regEx = "a regex";
public MyJTextField()
this.addKeyListener(new java.awt.event.KeyAdapter()
public void keyReleased(java.awt.event.KeyEvent evt)
if(evt.getKeyCode()!=java.awt.event.KeyEvent.VK_ENTER)
validateComponent();
else if(evt.getKeyCode()==java.awt.event.KeyEvent.VK_ENTER)
if(isValidated)
((Component)evt.getSource()).transferFocus();
this.addFocusListener(new java.awt.event.FocusAdapter()
public void focusLost(java.awt.event.FocusEvent evt)
if(popUpToolTip!=null){popUpToolTip.hide();}
public void validateComponent()
if(text.matches(regex))
isValidated = true;
if(popUpToolTip!=null){popUpToolTip.hide();}
else
isValidated = false;
if(popUpToolTip!=null){popUpToolTip.hide();}
String error = "C'è un errore nella validazione di questo campo";
JToolTip toolTip = createToolTip();
toolTip.setTipText(error);
popUpToolTip = null;
popUpToolTip = popUpFactory.getPopup(
this,
toolTip,
getLocationOnScreen().x,
getLocationOnScreen().y - this.getPreferredSize().height -1
popUpToolTip.show();
}(I've cut it a bit, here's only the lines that involve JToolTip use)
I have many of them in a form, and when the first tooltip appears (on the first textfield I type in) it never disappears, while nex textfields work just fine.It seems the first tooltip appearing can't be overwritten or something similar. If I use this same component on any other NetBeans project, everithing works without issues.
I have some other custom components working the same way (JComboBox, JXDatePicker), and they had this "not disappearing tooltip" issue since I changed this
popUpToolTip = popUpFactory.getPopup(this, toolTip, getLocationOnScreen().x, getLocationOnScreen().y - this.getPreferredSize().height -1);
whit this
popUpToolTip = popUpFactory.getPopup(null, toolTip, getLocationOnScreen().x, getLocationOnScreen().y - this.getPreferredSize().height -1);
but if I try it on the JTextField all textfield's tooltips stay stuck there, not only the first one appeared (while other components still works fine).
This thing is really driving me crazy. Someone has an hint (or a link to another thread) which could explain this strange behaviour?
Thanks in advance.

BoBear2681 wrote:
Note that an SSCCE wouldn't require you to post any proprietary code.Hmmm... well, I'll try again to reproduce the issue and post an SSCCE.
BoBear2681 wrote:
That probably indicates that the problem is somewhere other than where you're currently looking.Yes, I suppose so. Maybe it's some interference between all the custom components I created, or maybe something else that apparently doesn't conern at all. If I cannot reproduce it in an SSCCE and I'll figure out what's the cause of this mess I'll post it here for future knowledge.
Many thanks for your advices. :)

Strange behaviour with nested overflow headers

Hi there,
I have a strange behaviour with nested overflow headers. I have a hierarchy with some dynamic tables an several headers for the hierarchy steps. When the table entries lead to an page overflow, I would assume, that all parent headers will be shown. But unfortunatley only the last (the deepest in the hierarchy) defined overflow header will be shown. Here you can see a quick example of it. (http://www.nemonon.de/HeaderProblem.xdp)
Any help would be very welcome.
Thanks and greetings,
Joerg

That will sure work for some requirements and thanks for the ideas. But this would fail for the second table. Perhaps my example xdp only shows the behaviour of the nested overflow headers and it´s structure is reduced to show that. The real situation is a bit different. The parent containers also contain some other content. The Problem is not the table...I've just chosen it to produce some content and another nested header. Just try to uncheck the overflow header of the table. This will lead to, that the next defined header (in this case "HeaderThree" is shown. When you go on by also disabling that header, the next one will be shown...and so on. This shows, that the headers for their own are functional, but they fail in combination.
Greetings,
Joerg

LR 1.3.1 strange behaviour: L key adds keywords and removes pictures from collection

After updating to LR 1.3.1 yesterday I found a very strange behaviour that I cannot explain: While in the Library module and looking at a picture from a collection (in loupe mode) I cycle through the different light modes using the L key. Then suddenly (after several hits of the L key) a keyword is added (not always the same keyword) and at the same time an unknown number of pictures is removed from the collection. The keyword is not added to the picture I was currently viewing, but to another one from the same collection. This has not happened before and I have no idea what is going on. I can restore the collection by relaunching an older catalog but of course this does not solve the problem. Can anybody help?
(PC, Win XP prof SP 2, 4 Gig RAM)

It is possible that instead of hitting the l key, or perhaps within the same sequence of hits your are in fact accidentally hitting the k key.
K is the shortcut for "Add shortcut keyword"
Of course you would have had to set that particular keyword at some point and it does not explain the different keywords being assigned.
Unless the alt key was involved somehow and you were rating the images with 1-9 numbers. That would account for different keywords being assigned and would seem arbitrary.
To check: look at one or two of the images that you may have rated using a number key and then look at the keyword set the keyword came from. Press the alt key and a number from 1-9 will appear next to the keyword. If they match then thats the answer.
If you weren't rating the images this way then.....??
Perhaps there is a fault with the keyboard itself rather than the program.
David

Strange behaviour msi 7236 with e7400

Hello,
Is the msi-7236 supporting the e7XXX Intel c2d family ?
I've just switched from an e6400 to an e7400 and I've noticed some strange behaviours, mainly
the fact that the performances are the same with both processors ( and even a bit reduced with
the e7400 ! ).
Another big problem is in the bios CPU configuration section: instead of 6 options + C1E hidden features
there is only 2 + the C1E hidden features. Consequence is simple: impossible to setup Intel speedstep or
the other common options.
Additionally there is also a problem when displaying the frequency at the boot-time ( it displays 346xx MHz !)
and in cpuz, the coefficient displayed is 6 ( instead of 8 I guess for this entry level cd2 model)
As the latest msi 7236 bios is now 2 years old (v3.7), I guess this is the motherboard which is
responsible for this weird behaviour.
So anyone can help me with theses questions ?

945P Neo3, bios is version 3.7, to be accurate, internal nomenclature is 'MS 7236 revision 2.2'.
With ChristalCPUID I've succeed into putting the coefficient @10.5 so now the performances of the e7400 are as I was expecting, but the bios is still initializing the CPU with the lowest coeff.
Advanced features (64 bits instructions, SSE4 ,speedstep etc) are still not recognized.
I've also noticed that the e7400 is not listed on the 'officially supported CPU list' motherboard webpage.
How can it work partially without system failure ?
Would it be possible that 45nm are supported by this (old) MotherBoard even if it's not clearly specified by MSI ?

Populate List from Database (Very Strange Behaviour)

Dear Fellows,
I have developed a from which has two lists One for Major (say) and Other for Minor (say), thesr minors are based on the value of Major.
Now I have developed this system on Windows XP Professional, Developer/2000 6i and Oracle 8i (release 8.1.7).
Major list is populated from database and it shows all major values now using 'when_list_change' trigger the minor list is populated from the database based on the value of major list. Interestingly enough it is working fine without any problem.
Now I have deployed the software to Windows 2000 Professional/Server (tried on both), Developer/2000 6i and Oracle 8.0.5, but strangly the lists are not working now. First list (major) is still working but the other dependent lists are not working.
Another strange thing is that it populate the second list for one particular value (only at times).
The logic is that I have used a program unit to which i am passing 'list element' and 'query' and call it for each list in the when-list-change trigge.
Now its a very strange behaviour, I don't know what to do?
Your cooperation will be highly appreciated.
regards.

rolrollerx wrote:
Hi,
I have Nokia N8 (a great phone, btw) with Symbian Anna. I wanted to download the maps. But the PC Ovi Suite is just busy forever, without downloading anything (I used Performance Monitor to find out it was doing nothing for hours).
As I have unlimited data plan from my phone, I decided to try updating directly from the phone instead. It successfully downloaded the list of maps, but when I selected one of them
"No Wi-Fi network available. Please configure a WiFi access point in the phone Internet destination settings."
Why should I do that? I have a working connection on that phone (as evidenced by the successful download of the list of maps). So now, I am stuck. How can I download the maps?
Well, the suggestion is there. Use a router.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Another strange behaviour: Horizontal stripes

Similar Messages

Maybe you are looking for