Another voice - Menu changes - terrible - hard on the eyes and difficult on the brain

Upon seeing the new menu on Verizon my first thought was "why does Verizon feel the need to copy Comcast?".  I would think people who have Fios do not want anything that reminds them of Comcast. 
2nd thought on trying to use the new set up - just plain hard on my eyes and more difficult for my brain to focus.
My boyfriend asked "don't they test these things before they go live?".
The recent changes do not make for cohesive enjoyable viewing.  I also do not need suggestions of other tv shows to watch. Thanks but no thanks.
I use to think Fios was superior to all, that if i moved i would only relocate to areas that have Fios.  No so anymore.  More than ever now, willing to give another company a shot.
Very very disapointed at whomever approves these changes at Fios.
Solved!
Go to Solution.

This new guide is horrible!  I cannot believe that anyone can view it without squinting or looking away every few seconds. Hard to read - colors are distracting - mkes my head hurt!

Similar Messages

  • Changing internal hard disc on MBP and moving data into new one

    I have recently taken my MBP into service.
    The mother board is dead.
    My hard drive is ok (thank God!)
    I have taken the drive out and backing it up while my MBP is in service.
    I wish to buy a replacement 500GB drive for the MBP and give this to Apple when they have replaced my motherboard.
    Can I copy all the data from my current 250GB into the new drive?
    Even Apps, library and Snow Leopard system etc, like clone the 250 to the 500?
    Will everything from Snow Leopard system to Apps work?
    If so, how do I do this given that the new 500GB drive will be installed into the MBP?
    My 250GB has in a new external shell with USB port.
    If this is doable, this will save me a lot of time and I can start work again.
    Also I get an extra 250gb of free space from the new 500gb drive which will be my virtual space for Photoshop.
    Cal

    Dear friend,
    There is (or there was) also a solution (I don't know exactly what is your situation)
    wich is to make a complete Time Machine backup of your disk to an external drive,
    and then, after installing your hard drive, to start with Apple Install DVD and choose
    (NOT to install) the "Restore from Time Machine backup" in the Utilities.
    You will *not loose* any byte, any preference, nor anything else. It works very well.
    But perhaps can't you do that. Good luck !
    Kind regards
    Olivier Herrbach

  • I upgraded to ios 5 on my 4 but the voice has changed to a male voice on auto speak... how do i get the female back?

    the voice has changed since i upgraded the software on auto speak text correctiions, to a very dull sounding male
    is there a way i can get the female back?  i know on iPhone 4S i can choose to have say australian english, but on the 4 it doesnt seem to matter what i do... but hate his voice.
    why dont we have a choice?

    Not unless you saved an image of the 4.3.3 system. Otherwise, you cannot downgrade. You can see if you can find a standalone download link for it here.

  • More than 1200 bad blocks do I need to change my Hard Disk

    Hi
    my hard disk on a Macbook pro has more than 1200 bad blocks do I need to change my Hard Disk
    Thanks for your help

    yousseffromlimoges wrote:
     my hard disk on a Macbook pro has more than 1200 bad blocks do I need to change my Hard Disk
    What software and version did you use to determine you had 1200+ bad blocks?
    Was it compatible with Lion?
    Run the scan again and take a screen shot of the results and make sure to save it to a external media and disconnect it, you will need this to perform a warranty call and have the drive replaced.
    After you have backed up your files to a external storage drive and disconnected it.
    Hold Command r upon rebooting and enter the Lion Recovery Partition and run Disk Utility, see if the drive needs repair. I suspect it does. Check the smart status too.
    Follow the
    Restoring OS X 10.7 (new drive, total reformat method)
    https://discussions.apple.com/message/16276201#16276201
    Also make a clone of your OS X Lion Partition on a external drive, this way your prepared if the drive dies, you can option boot off the clone. If you get a new drive you have a copy of Lion Recovery on the USB.
    It's highly unusual for a drive to have 1200+ bad blocks, the Zero Erase Free Space will confirm it as it's going to use up all your spare blocks.
    The drive will likely brick, which you then can option boot off the clone.
    Schedule a Apple warranty/AppleCare call if your under it, or order a new drive online from OtherWorld Computing "kits", iFixit for videos or other Mac places online.
    http://eshop.macsales.com/installvideos/
    You can read my link provided how to format the drive.
    However if your Zero Erase Free Space turns out fine, then I suspect the software you used or perhaps something else is wrong with your OS X not correctly reporting your drives data characteristics correctly.
    You could be spared a costly repair if that's the case.
    Good Luck.

  • When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is changing

    When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is changing the metadata and stop it?

    Thanks Sean,
    I've had a look at the TC settings dialog and tried to keep it as simple as possible. I also had a copy of LR 4 on the hard drive so have trashed that also incase of any conflicts. LR seems to be running ok now but as said it's an intermittent problem.
    I also have a copy of Capture One on the hard drive so am going to uninstall that also in case it is trying to launch.

  • JBO-25014: Another user has changed the row with primary key...

    Hello,
    could you help me please with resolving this error "JBO-25014: Another user has changed the row with primary key..." - I am just getting a row from a view by bind "filter" variable, then I am assigning new values for some of the attributes - and trying to commit ..unsuccessfully..
    View is based on Entity.
    I saw directive for setting Entity's attributes as "update after insert / update" - but this did not help me.
    Thanks in advance.

    Hi
    Please try this solutions:
    One solution is to change the ADF BC locking behavior to optimistic instead of pessimistic. Choose the AM and click the Configuration context menu option. Select the LocalAM entry and go to the Properties. Scroll down to the locking setting and change the existing entry
    If there is a trigger changing values, you need to mark those attributes (the ones that may be changed) as refresh after insert and/or refresh after update in your Entity Object.

  • Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

    Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

    If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
    Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

    The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue.  Is there a cable i can connect to another mac that will let me transfer the file?

    There is another option if the Macbook will start up in Target Disk Mode.
    Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
    http://support.apple.com/kb/ht1661
    Firewire symbol:

  • HT204053 I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.

    I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.
    How do I enable my new device with an existing ID - I do not need to change the password for the millionth time!
    None of the FAQs (or the Community choices below) address new devices, they are all about APPS and iCloud stuff.

    If it is an existing iCloud ID, you should be able to just go to Settings>iCloud and sign in with it.

  • HT204074 I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even  I authorized the machine to my Apple ID, I can not connecto to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed.

    I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even  I authorized the machine to my Apple ID, I can not connect to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed. I still can not connecto to the Store.
    My previous machine has Itunes Installed, and I deauthorized the machine so I unlinked to my Apple ID, if this is correct.
    Anyway, Dropbox is also not connecting....so I do not know how to make it woek. please help!

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

    Hi,
    I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
    To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
    a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         OperationBinding operationBinding = bindings.getOperationBinding("Commit");
        Object result = operationBinding.execute();
       if (!operationBinding.getErrors().isEmpty())
        return null;
    b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
    c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
    Code in Application Module:
      public void refresheftTransactionsforBillingAccountViewObj1View()
        System.out.println("In eftTransactionsforBillingAccountViewObj1");
      findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
    Code in view scope bean
            DCBindingContainer bindings =
           (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
            OperationBinding operation =
            bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
            operation.execute();
    I have searched web, ADF forums and tried methods suggested in there but no sucess.
    Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
    Thanks!
    Shai.

    What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
    Also -
    Shai wrote:
    'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
    which all attributes you set this property for . it should just be for History columns as such.
    Did you also check if this could be your scenario ?
    Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
    OR
    JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
    OR
    Another user has changed the row with primary key -Table changed externally
    Message was edited by: SudiptoDesmukh

  • Hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be which is it had a green colour on it's side.what can i do to fix it and what is the reason for it?

    hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be it was green on it's side and blurred.what can i do to fix it and what is the reason?

    either something got damaged when you installed the hard drive or you need to perform a pram reset (other possibilites could have occured, these are the ones I think)
    PRAM http://support.apple.com/kb/ht1379

  • My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

    My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

    I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
    - Restore from backup via iTunes. This will install a fresh copy of the iOS. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.          
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before.

    I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before?

    Start with B5/6 in the 1st linked article.
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

  • How in the HECK can I change my Hard Drive icon??!??!!

    I've tried searching these discussion forums for how to do this, but the question has always remained unanswered! Does ANYbody know how to use this? I'd buy applecare but I'm a student and can't afford it. Would somebody please figure out how to make it so that you can paste a new icon on top of the standard icon for 10.3.9? It's driving me crazy that after I copy the icon I want to use for my hard drive that I can't paste it on top.
    And I've tried doing a permissions repair in Disk Utility.
    400 MHz PowerPC G4   Mac OS X (10.3.9)  

    That's how other people do it, HVlaar; it's the standard procedure. Works fine for me. Are you logged into an admin account? Have you considered that changing your hard drive icon probably isn't an important thing to do anyway?

Maybe you are looking for