Another volume control problem after installing new software

I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage) 
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels  PIN: C0007093A
Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Similar Messages

  • Problem after installing new software on torch 9800

    Hi, 
    after installing the new software version 6.0 Bundle 3159 my blackberry tells me that:
    uncaughtexceptation:
    Application
    net_rim_bb_nabsync_114(261) is not responding;
    process terminated
    but also there is an e-mail that doesn't work when I wan´t to open it fist of all it doesn't open then suddenly the screen turns white and it tells me something and below it there is a button to reset. If I click on the button the phone restarts

    Friend should do an update again your team blackberry.
    Remember to make a backup with Desktop Manager and the BlackBerry protect
    Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
    Software For BlackBerry® Torch™ 9800 smartphone
    BlackBerry Handheld Software v6.0.0.3170 (Multilanguage) 
    Package Version: 6.0.0.3170
    Consisting of:
    Applications: 6.0.0.756
    Software Platform: 6.6.0.252
    File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
    File size: 171.22MB
    https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
    Regards.
    Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
    Accept as Solution to ** Comments **
    @gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • After installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable

    after installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable what should i do ???

    Usually this is because the activation server is temporarily unavailable. Try again in 20 minutes or so.

  • ITunes.  After installing new software, what does "restore iPod" mean?  Does it mean to restore all games and data to the new software or does it mean to "undo" the software update?

    iTunes.  After backing iPod to computer and installing new software, what does "restore iPod" mean?  Does it mean to restore all games and data to the new software or does it mean to "undo" the software update?

    You can restore your iPod to "New" which will erase every thing and install fresh iOS software or you can restore to a particular backup that you have previously created. In this case, your iPod Apps & data will appear as per the backup. Note that some content is not in a backup and will need to be synced back to the iPad from the iTunes music library or from, for example, the iPhoto photo library.

  • Iphone 5 keep dropping calls, after installing new software

    since instaling new software, my phone keeps dropping calls, with message call failed.....

    Hi Ricardo Jame,
    Here is an article for you that will help you troubleshoot this issue with your cellular data connection:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Problem with installing new software !!!!!!!

    Hello!!
    I got a message that there is new version of ipad software..
    I've wanted to update, and then my problems started.
    First it couldn't install new version, then it said I have to restore software, and now it can not restore the software on my ipad.
    I connect ipad with itunes, it say: resotring ipad firmware... I see on my ipad line around 70% and that is all.
    after one hour it is still 70% restored. I can not do anything.
    I can not turn on ipad (I can only connect with itunes), but it won't restore a software.
    should I leave so, maybe after 8 hours will come to end. or..???
    thanks in advance.

    Try placing the iPad in Recovery mode and then restorinf via iTunes.
    Next would bne to try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Speakers don't work after installing new software

    I have a 2nd gen iPod touch. Before I downloaded the 3rd gen software, the speakers worked perfectly fine. However, basically none of my apps worked anymore and the upgrade was only $5 so I said "Hey. Might as well."
    Unfortunately, I can no longer play any music/sounds using the speakers anymore. Without any headphones plugged in, the volume adjust bar doesn't even show up. The side volume control buttons are unresponsive. I know the thing still has speakers, it just doesn't want to use them! Does anybody know what I am doing wrong?
    thank you!

    I have the same problem... my sound bar works... but no sound... also video starts freezing as well as a few games... restored 8 or 9 times but it still does not work.....

  • Troubles with Ipod after installing new software

    After installing the new software on my Ipod Mini 4GB, it won't charge, or at least, it sais it won't.
    I have a USB power adapter, and I charged my Ipod all night. This morning, I STILL got this
    http://www.sharksdiest.com/stephane/ipod.jpg ...
    I already tried to reset the Ipod several times...I tried to connect it to my PC (Windows XP), but also that didn't work, so I can't install other software.
    Does anybody thinks he/she has a solution? Should I go to the store (I already send them an e-mail several minutes ago). Or is my Ipod dead, and should I buy a new one?
    Thx for your help

    Usually this is because the activation server is temporarily unavailable. Try again in 20 minutes or so.

  • Startup problems after instaling new graphics card drivers

    PC:    HP   p6520 f    with a 400 watt power supply
    video card:    AMD Radeon 6570   (MD1GD3)
    After getting the 400 watt power supply, I was able to uninstall the intergrated graphics card's drivers, but I can't succsesfully startup after installing drivers for the new card without a system restore, which of course gets rid of the new drivers.
    I've tried newer drivers, but those don't work either.
    Any suggestions?

    Hello Sev_07.  I understand you're unable to install your video card drivers.
    Are you receiving an error on boot?  
    Are you experiencing any issues with other pieces of hardware?
    Have you tried running HP Support Assistant and Windows Update to ensure all of the software and drivers are completely up to date?
    It may also be helpful for you to provide your product number so I can look at your computer's specifications.  This document can show you where this is located.
    I hope you have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Is anyone experiencing volume control problems after update to OS 4

    When I adjust the volume via the side buttons, it doesn't change the volume. The volume buttons shows up as I'm adjusting it, but there isn't any real change.
    I go into settings-->sound, and the volume is still in the same position (as if I didn't adjust anything), and if I wanted to hear any real changes, it'd have to be done in here.

    I haven't experienced those problems... My only problem has been with the volume controls. I tried playing music, and wasn't able to control the volume with the side buttons as well. I have to adjust it on the screen, which has become quite a nuisance for me. So basically my side volume buttons are useless as of the update to the new OS.

  • Permissions problems after installing new hard drive

    I backed up my old hard drive with SuperDuper!, then installed a new hard drive. When I tried to install my backup on the new hard drive with Disk Utility, it would work fine and then hang. It wouldn't finish, even overnight. So I installed a clean copy of leopard on the new hard drive, and then used Migration Assistant to move everything over from my backup. Worked great, until I actually tried to use the computer. Tons of permissions issues, mail and address book wouldn't run, Skype won't run even after installing an upgraded version, etc. What's weird, is my main account is an administrator account, but logging on as root and trying to remove admin permissions from my main account, the checkbox is greyed out! I also don't have a UID 501 on the system. I'm 502, and my wife's account is 503. I can't fix permissions from the finder, and in certain cases can't get them changed in terminal logged in as root. I don't know how to get my data from my old hard drive (which is running 10.5.1) to my new hard drive (also 10.5.1) Please help me! Thanks.

    Hey Shawn,
    Have you looked at the permissions with "Get Info"? Are they listed as belonging to "unkown user"?
    First of all, see the Apple doc <href="http://docs.info.apple.com/article.html?artnum=306876">Administator user changed to standard.
    After you clear that up, you'll probably have to remove the "unkown user" and add your user as the owner of all your folders. During that process, finder will probably crash. At that point, try running <a href="http://discussions.apple.com/thread.jspa?messageID=5670342#5670342>this terminal command described in "mlaster's" second posting.
    Good luck!
    CMF

  • Exchange 2007 - Outlook Anywhere problems after installing new SSL cert

    *** Original thread posted on wrong forum ***
    Hi all,
    Exchange 2007 environment (2x CAS, ISA2006). Not much familiar with Exchange.
    Problem: 20-odd machines off the domain use Outlook Anywhere (XP with Outlook 2010). AUthentication pop-up and not able to connect.
    Company has recently changed its name and we have to renewed the SSL cert. Previous SSL cert. was issued to: webmail.oldcompname.co.uk (several SANs on that cert., including internal server names).
    Applied for a new UCC SSL cert issued to: newcompanyname.com (also includes webmail.newcompanyname.com ; autodiscover.newcompanyname.com + old SANs).
    The setting on those machines point the proxy to the following:
    Https://webmail.oldcompname.co.uk (which is fine since it is in the cert and can be accessed)
    Only connect to proxy servers that have this principal name in their cert.: 
    msstd:webmail.oldcompname.co.uk (I believe this is the problem since the new UCC SSL cert. was issued to newcompanyname.com).
    Browsing technet + internet it seems that I need to look into OutlookProvider EXPR.
    When I run Get-OutlookProvider everything is blank (I believe I should be concerned to EXPR only for Outlook Anywhere).
    I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com
    My only concern is whether this might break something else in the Exchange environment, especially as we have 100+ users on smartphones connecting via SSL on webmail.oldcompname.co.uk
    Is it save to run this command? Do I need to re-start IIS? Do I need to look into any settings on ISA2006?
    Comments/help are much appreciated.
    Regards 

    Hi,
    According to the description, I found that we re-new a SSL certificate.
    "I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com"
    Just do it. Then remove the old certificate on ISA server and install a new one.
    Found a similar thread for your reference:
    Renewal of SSL certificate in exchange 2007 with ISA 2006
    http://social.technet.microsoft.com/Forums/exchange/en-US/25770038-8491-470a-92fa-8ae50674b7a6/renewal-of-ssl-certificate-in-exchange-2007-with-isa-2006
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Wifi connection with 4s not working after installing new software ios6

    wifi connection with 4s not working after installing ios 6.

    Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
    Then go to Settings > General > Reset Network Settings  and try connecting again when the phone restarts.

  • Problems with Java 1.5+ after installing new "Software Updates".

    I downloaded the regular 'software updates', now my macbook pro won't open Vuze, instead coming up with the message " Cannot launch "Vuze Installer". No compatible version of Java 1.5  available." Then it won't let me "Open Java Preferences". What do I do???

    This is silly. Just because you don't know Vuze doesn't mean there's no problem with this update. My friends are having the same issue, of course we are looking at possible problem from Vuze's part but we cannot really say this update has 100% nothing to do with Vuze's launch failure, can we?
    P.S. Since Vuze is not banned by law, it's still legal to use it. It's up to people if they want to use it for good or bad.
    dogquake

  • HDD problem after installing new SSD

    i bought a Kingstone SSD 60GB, and procced to a clean installation in my HP DV7-1020us laptop wich i love. All nice and good... i got out the HDD, install SSD in previously used HDD slot, install windows 7 on SSD partition, put the HDD in second hard drive bay that was it.
    The problem is... after couples shuts down of my laptop (still working good), one time when i started, my laptop spent like 10-15 mins trying to start up the windows , ( i could hear my old HDD working hard) and after that i wanted to reach my HDD but i couldnt... i double click on the partition i want to open and my HDD starts working hard hard and in the end it says that i need to format it so i can acces it.  My hdd haves 3 partitions... i runned disk checks and repairs and still doing the same. I finally formated all of it... all of my HDD partitions including the Recovery partition. My HDD works fine until i shut down my laptop for the first time after formating, then another 10-15 mins to start up and shut down the windows. Also if i connect my hdd via USB everything is fine ( if i previously format the HDD and connect it via USB).  But if i move it back into my laptop in my sata slot things goes bad again. Also if i wait 10 mins at start up, get the hdd out and connect it via usb it still runs very ver very slow, and one partition asks me for formating. So i'm thinking that my second sata slot connection does something bad to my hdd. 
    I'm thinking that my second sata slot haves some problems... what should i do? I dont like my HDD working on my USB, it's a laptop, everything has to be integrated.
    Oh and if i move my ssd from first sata slot to my second one, it says  "please insert bootable device...."
    Thank you, if u need more information please ask me

    Hi mykey651,
    Thank you for your query, I will do my utmost to assist you.
    I grasp you have installed a SSD drive as the main drive and the original drive as a secondary. All works well until you reboot and then it is unable to locate the SSD.
    Here is a link to HP Notebook Hard Drives & Solid State Drives Identifying, Preventing, Diagnosing and Recovering from...
    If that has not helped, I suggest you go out to the bios and restore the defaults.  This will reset the system and make it scan for  installed hardware.  This should help it to find the new SSD as the boot drive.
    Here are two more documents that may be of help.
    About Solid State Hard Drives
    How to Install an SSD (Solid State Drive
    Hope this helps and have a great weekend.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for