"Answer" Call Button Not Responding

When I am receiving a call, I want to press "answer", but the answer button just not responding no matter how many times I try to press the green color circle answer button. This is happening quite often though not every single time.

When I am receiving a call, I want to press "answer", but the answer button just not responding no matter how many times I try to press the green color circle answer button. This is happening quite often though not every single time.

Similar Messages

  • Buttons not responding correctly

    Help
    I am trying to get a simulation to work but I have problems
    with buttons not responding to actionscript properly.
    Here is how I have it layed out:
    I have a labels layer with 12 keyframes labeled scn2A,
    scn2B...scn2L
    I have a buttons layer with all of the buttons on it.
    The buttons layer has 12 keyframes.
    One button advance to the next frame, the other advances to
    the next scene.
    Each keyframe has the same buttons but different instance
    names. scn2DwnA_btn, scn2DwnB_btn...scn2DwnK_btn.
    The last keyframe uses a different button with an instance
    name of scn2Ok_btn
    here is the problem, when I test the movie everything works
    fine until the last frame.
    The DOWN button is used to advance each frame and then the OK
    button is used to advance to the next scene
    The down button has no script in the last frame but it is
    advancing to the next scene upon a mouse click.
    I would be glad to email source to anyone who would like to
    help.
    Thanks

    The code is just basic button code:
    scn3Ok_btn.onRelease = function...
    all code for each button is on a frame in an actions layer.
    each frame is a keyframe.
    So frame one actions would reference the instance names for
    the buttons in frame one of the timeline.
    Frame two actions would reference the instance names for the
    buttons in frame two of the timeline.

  • Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

    Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

    You will not belive how I accidently solved this - !!!
    Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
    I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
    so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
    I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
    what a mad techno world we live in! :-)
    Dave

  • After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

    After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

    I suppose that you can demand all you want. It would have to be proven that the iOS update broke this particular function but it could also be said that it was just a matter of time that the broken thing manifested itself. Since the phone is out of warranty, it could also be said that it is your risk to update software. I'm not trying to be argumentative here, but we are not Apple. We are users like you and just try and provide support to other users. What you decide to do from here is your decision. I've given you all I know to do.

  • Ringer icon staying on,volume raise button not responding ,unable to turn phone on/off,phone now dead.!

    Ringer icon staying on,volume raise button not responding ,unable to turn phone on/off,phone now dead.!

    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore from Backup..  Restore as New...
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 15 - 20 Seconds...
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • ITunes Music and Home button not responding

    Itunes Music & Home button not responding all other content OK when music button clicked displays the following "The item you've requested is not currently available in the UK store"

    I haven't read this whole post - in fact I almost stopped reading any of these post. I read all the horrors look over at my own phone (which is working correctly at the moment) and wonder when it is going to go belly up.
    jyoz, Try doing a DFU and setting up as new. I don't believe that "Restore" goes deep enough to clear the bad code.
    Do you also have poor battery life?
    The reason I ask is I am starting to believe there is a piece of code that is corrupt and running at near 100% CPU usage.
    If this is the case it sort of explains button, icons and poor battery life.
    There is one other suggestion that I have read that says delete all email accounts and reset/erase all. Then go to DFU and setup as a new phone. This procedure probably gives you the best chance of clearing out the Bad Code Snippet. Just to defend all this crap that we have to go thru I did get an Apple/at&t support guy tell me that even "Push" on email is/does not always work correctly. Once he realized what he said I could not get him to talk about it anymore - Apple you gotta love-em.
    I know you have been thru hoops trying to fix this but you only have two option take it to a store and don't leave until you get a new one that they have updated to 4.1 for you or try some of the extreme suggestion that I am repeating from other post.
    Best of luck - and please remember sometime there are failure that you at home are just never going to fix - so if you don't feel like another Excedrin headache GO TO THE STORE AND EXCHANGE IT if for no other reason than to preserve you mental health.

  • Buttons not responding? Here is what I did.

    Okay, so your shiney new iPod Nano's buttons stop doing anything and even the cick-wheel gives up on you what do you do? This is what I did:
    1st Action) I checked out the online manual
    1st Result) Not much... all they had on there was the standard, '...Is the hold switch toggeled?..'
    2A) Did a little digging online to see if I'm the only one having this problem.)
    2R) Found out (by looking at this site alone) I'm not.
    3A) Actually 'Restored' my iPod... Not sure if this particular action had anything to do with it working again and I'm interested if this actually has any effect on the process as a whole.
    3R) It did what it was supposed to. Wiped that puppy clean, but the buttons still won't work.
    4A) Realized that most of the 'suggestions' I was receiving called for workng buttons to achieve the maximum effect... 4R) Uh HELLO they don't work that's why I'm here!!!
    --- THE GOOD PART ---
    After giving up all hope I come across this peiece of information that goes on to say that the 'Hold Switch' being toggeled on and off actually re-calibrates the buttons and click-wheel, and that if you are touching the click-wheel (even slightly) it could cause all buttons to not respond. AND (this is the part that noone else ever said) the best way to try and get the buttons to work again is to lay on a flat surface (table, desk, etc.) and then flip the 'Hold Switch.' If that doesn't work leave it lying there 'un-held' and press the 'Select Button' a few times. This is supposeed to re-align, re-calibrate the buttons all the way, not just the way the iPod reads the info they input.
    --- Thats All ---
    If this was helpful in anyway, or if you have questions/concerns/tips how-to not babble, please send me an e-mail at [email protected]
    HP aW205 (POS)   Windows 2000   It's a work in progress...

    er. try reseting it with holding menu and the center button. if this dosent even work try sending it to apple or bringing it to an apple store for an exchange.

  • HT1430 Ringer function button not responding any ideas?

    The ringer button  is not responding to up or down.. I'm missing calls, however settings state it's operational and alarm is still working. I will try to reset and reinstall original phone setting. But what a pain in the behind. Any suggestions to try before I bring my life source and connection to the world back to the apple store?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Zen Micro Buttons not responding help!

    Hey , My zen micro was working fine till today when I turn it on all my "digital" button are not responding , the only working button is the power on/off button, it syncs perfecly but I cant do anyhing with all the other buttons, I tried reinstalling the firmware but it still dosnt work , ant I cant reset it cause the buttons dont work .
    any ideas ?

    did you push ur buttons too hard? or squish it or anything? it's a TOUCH pad, so you shouldnt apply too much pressure on it, a good light tap will do it. Are you still under warrenty? call Creative and check it out.

  • Hard drive not recognized​, Lenovo Care button not responding

    I have a Lenovo 3000 N100 laptop.   Type 0768
    When powered up, it will not boot to the operating system.  I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button.  It will not respond to the Lenovo Care button.  Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens.  Pressing F1 changes the message to "Please Wait...", but again, nothing ever happens. 
    I followed the troubleshooting guide which said to try reseating the hard drive, but nothing changed.
    Is it dead?

    I had the same exact problem as b4blackhad
    "I have a Lenovo 3000 N100 laptop.   Type 0768
     When powered up, it will not boot to the operating system.  I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button.  It will not respond to the Lenovo Care button.  Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens.  Pressing F1 changes the message to "Please Wait...", but again, nothing  happens. 
    Word for Word same problem I faced.
    I turned on my laptop while continuously pressing the  "PrtSc" button upper right corner and it started up as normal!
    I am not all that PC. Smart, very average. I saw solutions saying to press F1 TO F12 tried them all and nothing worked.
     I saw "Remove hard drive" or "Replace Memory" OMG what am I gonna do now!!! Took a chance with "PrtSc" now I'm sooooooooooooo relieved, thanks Lenovo Community for all the tips that put me in the right direction : )

  • Issue with Print Properties button not responding in Adobe Reader 10.1.10

    We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding.  When this happens Adobe Reader will crash if you click on the Print button.  If you go into Devices and Printers and try and access the Printer Properties you are prompted to install the driver for the device.  It does seem to be quite random, it will work fine for days and the suddenly happen.  I've done testing and have been able to get it happen by opening Outlook, Word or Excel but it is completely hit and miss.  Sometimes the issue will happen and other times no matter how many times you open and close the various applications it's fine. 
    Fortunately it only seems to be an issue when accessing Properties, if you just print there are no options which is probably why we don't have more complaints.  Unfortunately this didn't come to light until we'd rolled it out to 2000+ machines across 8 locations.
    So far I've tried the following:
    1. Upgraded to Adobe Reader 11.0.9 and same issue
    2. Created a test print queue using a different print driver (my machine has a different driver again and is using a different print server)
    3. Uninstalled a number of applications that have caused us issues with Office 2010 due to dodgy addins (Workshare and HP Filesite)
    4. Rolled back to 9.4.4 and seems OK.  Problem here is that they receive PDFs in formats not compatible with older than X.
    System is Windows 7 Enterprise SP1 32bit, Office Professional 2010, printing is to Ricoh Equitrac (Follow You)
    Anyone have a fix for this or come across this before.  I'm going to try testing with a Postscript driver to see if that helps, which is the last item on Adobe's troubleshooting list.

    Select a PDF file, CMD+I, check the Open With section, and ensure that AR is selected. If not, then select it and click on the Change All button. Alternatively, select Preview, which is my default PDF reader.

  • Add call button not present when in active call

    Hi all,
    I have a MacBook Pro (the latest one with Yosemite 10.10.2). I dont have an iPhone so no integration has been done. I was watching Modern Family - "Connection Lost" episode and I saw Claire adding another call when she was in a Facetime video call.
    But I dont have a green color "Add Call" button on the top right in my device. I searched online and found info similar to what she did like "End current call and answer" or "Accept call" options when another call comes in. But I cant find these in mine.
    Can someone help me out with this?

    Salim,
    In APEX 4.0 we moved the server-site add-row functionality to a client-site implementation, i.e. instead of having the page be reloaded every time you add a row, this is now done on the client without reload. Tabular forms that were created prior to 4.0, but then upgraded to 4.0 or later, keep the original server-site add row function, unless they are manually upgraded.
    Not sure why your tabular form might have stopped working, but if you could install your app on apex.oracle.com, I'd be happy to take a look. In general though, I would recommend manually updating your old tabular forms to use the client based add row feature. To do this, just edit the add-row button, and change the button action from "Submit Page" to "Redirect to URL" and as the URL Target, enter "javascript:addRow();". That's all. You could also delete the add row page procress, and the MRU process that was associated with the add row button, because they are no longer needed nor used.
    Regards,
    Marc

  • IPod touch home button not responding well even after replacement

    Replaced the home button of my 4th gen iPod touch 2 times but no go, I even tried to restore but it still doesn't work. Please any help will be appreciated.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
      - If still not successful that usually indicates a hardware problem. Maybe you damaged something when you repaired thw Home button.

  • Vimeo play button not responding

    Hi,
    None of my vimeo video's seem to be working off my website.
    They used to work fine but ever since updating to Firefox 18.0, the play buttons have stopped responding.
    You can view the issue at the below link:
    http://www.glengranttasting.com/en-us/personaltasting.aspx#How%20To%20Run%20A%20Whisky%20Tasting
    You will need to login with client code 1234

    Hi,
    I updated my flash to the latest version - closed the browser, re-opened, tried again - but no luck. The play button does not respond. (nothing crashes though)
    I then navigated to Help --> Restart Firefox with addons disabled, and then chose the "safe mode" option although the problem remains.
    I should also mention this is happening on all the PC's and Macs within the office so I don't think it is a PC specific problem.
    Please let me know what else I could try. We are all on Firefox 18.0.2 currently. Thanks!

  • IPhone 5 issue with music playback- buttons not responding

    When playing music on iPhone 5
    - The play/skip button on my headphones does not work when pressed. If I want to pause a song, or tap twice to skip ahead, it does nothing. The volume buttons on the headphones work, but the center button does not. It DID work previously, but recently just stopped. I tried the same headphones on my iPod, and they work perfectly
    - When the screen is locked, if I double tap the home button on the phone to bring up the playback controls, it does not play when I press Play, nor does it skip forward or back. None of the buttons respond.
    It seems to be an iOS6 issue with the device not responding to the commands. Anyone know of a fix, or do we have to wait for a patch?

    I found it!!! General, Passcode Lock, and make sure that under "Allow Access When Locked" catagory Reply with Message is ON

Maybe you are looking for