Answer for connect IMac via monitor for Mac Mini

hi I have a problem with an iMac late 2009 21.5 I want to connect to a new Mac Mini to use as a monitor with the Thunderbolt cable, the problem is that on the Apple support site does not say anything about 21.5 , since it is an important issue I would ask you the answers that are true as soon as possible, thank you.

Because as this says:
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
Your model iMac is not supported
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
This app works pretty good with a wired ethernet/network connection
ScreenRecycler

Similar Messages

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

Can I connect my PS3 to my mac mini via HDMI ?

Hello, I would like to know if I can connect my PS3 to my mac mini via HDMI ?
I don't have a TV anymore so I really need to know if I can use my mac mini as one.

Maybe this:
http://eshop.macsales.com/item/Elgato/10025010/
But you need OSX 10.7 or later
and if you have Thrunderbolt connection on your Mini then this maybe:
http://eshop.macsales.com/item/Blackmagic%20Design/BINTSTBEXT/
You YOu my be able to Google and find another videi-in adopter for your Mini

Just made the pc to Mac jump. Can I connect my iPad to my Mac Mini via Bluetooth ...my current keyboard isn't connecting so I can't even get passed the password screen.

Someone please help me connect my two devices together so that I don't have to purchase yet another item. Is there an app or something that would allow me to connect my Mac Mini to my iPad 2 wirelessly. I can't get passed the password screen because the wireless Keyboard will no longer connect to my Mac ...helllllppp .... I use it for both my iPad and my Mac mini....does that matter?

If your iPad is close enough to your keyboard and Mini
and if the iPad is merely in standby and not off, the
connection to the iPad is still active. Therefore, the
keyboard will not connect to the Mini.
If the iPad is far enough away to break the Bluetooth
connection or you unpair from the iPad or you turn the
iPad off, then the keyboard should connect just fine with the Mini.
Most Bluetooth HID's (Human Interface Device) can only service
one host at a time. This is by design.

3D Vision via bootcamp on Mac mini (continued)

Hi
Before I read this archived thread,
3D Vision via bootcamp on Mac mini
https://discussions.apple.com/thread/2545736?start=0&tstart=0
I downloaded the latest NVIDIA driver 285.62 for my Mac mini server
(2010,GeForce 320M graphic chip)
for testing hdmi 1.4a frame-packing 3D output under windows7 x64 Boot Camp.
First time,I tried the NVIDIA driver with “recommended install” option,
then it output black screen, I can’t do anything,
so I entered the safe mode,
recover to the origin driver come with Boot Camp 4.01.
I find some suggestion from someone’s experience by Google,
second time, I tried the “Custom install-whole new install”
(or something like this, I did it under international version),
it passed the part where first time fail,
It seems OK then installation completed and reboot.
After reboot,
I can’t enter the boot camp partition by pressing “option”during restart,
The list of choosing HDs or recovery HD option not shown at all,
it just boot into OSX,
I can still see boot camp partition under “Finder”,
but boot camp is gone under Startup Disk control panel.
After repair procedure of Disk Utility,
the boot loader still not shown
& boot camp still gone under StartupDisk control panel.
The driver seems damaged the boot partition table.
I think I need to re-create the Boot Camp partition
and re-install windows 7 again!
Above is my foolish experience.
The question is:
Is there anything I can try to recover my boot loader?
What’s the version of driver successfully support 1920x1080 24p 3D output?
Is the newest NVIDIA driver 285.62 available for mac mini
by modded.inf method mentioned from the archived discussion?
Thank you~

After updating NVidia driver newer than 267.76,
I got black screen after Windows Logo shown during reboot.
After countless annoying tests,
I installed the newest NVidia 285.79 driver without problem finally.
My original prefered display configuration:
link the primary monitor with HDMI port
I already followed the GeForce Driver Installation Guide, step by step,
http://forums.nvidia.com/index.php?showtopic=169555
but there's still black screen after reboot.
THEN, I TRIED TO USE mini-DISPLAY PORT INSTEAD AND REBOOT AGAIN,
video signal was connected to my DELL 2707W(only DVI port)
by MiniDP to HDMI adapter/HDMI-DVI cable.
The display is NORMAL NOW !!
Root Cause assumption:
Maybe the driver newer than 267.76 always regard miniDP as primary signal output port,
even if you set the HDMI port as primary.
I think this is a serious bug, but no solution after mote than 30 driver updating.
The following configuration worked on my Mac mini 2010 system:
mini─miniDP to HDMI adapter─
HDMI cable to HDMI splitter─┬HDMI-DVI cable─Dell 2707
                                              └HDMI cable─ 3D projector
but I found that the configuration can't play 3D video...
So I changed the configuration to:
Mac─miniDP to HDMI adapter─HDMI-DVI cable─Dell 2707
      └HDMI cable─ 3D projector
For your reference.

I need help to take decision to choose between iMac Late 13 and Mac Mini Late 12

Hey guys,
I have currently got iMac 27 3.2 GHz mid 2010 and since I am a photographer it unfortunately dosn't meet my requirments at all! It has recently become too slow and that is why I have taken my decision to purchase a new desktop to improve!
I was intensely awaiting new Mac Mini Late 2013 at Apple 22 Oct event yet no new Mac Mini came up for upcoming year! Now I am very skeptical to choose between to options; iMac Late 2013 and Mac Mini Late 2012! Since having high performance is really essential for me, I am going to tune up my device with 2 Samsung 840 PRO SSD and 16GB RAM to take advantage of the best possible performance.
Since I can easily utilise my iMac 2010 27" as display for Mac Mini, please instruct me which on I should buy or I have to be more patient for next Mac Mini!
Thanks in advance!

I am not sure how you are planning to "easily utilise my iMac 2010 27" as display for Mac Mini" I am concerned that might not work out nearly as well as you might think. I have seen that attempted by others and the results were pretty clunky and could easily wipe out any anticipated speed gains. Be sure and talk to someone who uses an iMac as a display for another computer before you spend any money.
That said, if I were in your shoes I would either go with a current top end iMac or a maxed out, top end Mac mini and a 27" Thunderbolt monitor. You will end up spending about the same either way. You can save a few hundred dollars buying factory refurbished machines from the online Apple Store or Smalldog.com but you take your choice of what is available and don't expect it to be there tomorrow.

3D Vision via bootcamp on Mac mini

Hi,
sorry for my english in advance
I have problems to get 3D-Vision to work on my system:
*Mac mini (June 2010, Alu)
*Bootcamp, Windows 7, 64-bit
*Acer H5360 projector (via HDMI to Mac mini)
*nVidia 3D Vision Kit
*the projector is set to "nVidia 3D Vision" mode
*the projector displays 120Hz
*graphics card in the new Mac mini is the GF 320M
*since the 320M uses an older bootcamp driver (April 2010) i can only use the following 3D Vision drivers from your archive:
NVIDIA 3D Vision v197.13
NVIDIA 3D Vision v197.41
NVIDIA 3D Vision v197.45
*only with one of these drivers installed, i get the "stereoscopic 3D" tab in the nVidia Control Panel
*if i check the "enable stereoscopic 3D" box the 3D Vision wizard pops up:
*the wizard detects the USB-IR-Receiver; it glows green and strong green when displaying the test picture
*the wizard detects the projector as "Acer Projector (0701)"
*everything seems to be ok until now...
*when i turn the glasses on, it glows green - but no shuttering happens, nothing
The 3D Vision glasses won't synchronize or even start to shutter.
Any suggestions? Thanks!

Hi again,
Just tried to download the 259.22 driver and found that the .inf for that version doesn't exist!
Did you just run the standard setup or did you get it working some other way? At the moment, I can install and I get a solid green light on the transmitter, but my glasses don't flash!
Also, I can't seem to set my monitor to 120Hz in the resolution control panel, although the Nvidia control panel detects it as a 120Hz Samsung.
I am using windows 7 32bit, so I guess that may be giving me problems, just trying to figure out exactly what drivers you ended up getting working.
Thanks again,
James

Can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

Investigate the Air Display App to see if it will do the job for you.

2 monitors on Mac mini

Can I use two separate monitors w Mac mini.

Yes, according to the tech specs here: http://www.apple.com/uk/macmini/specs.html it says:
Video Support
Works with almost any display or HDTV.
Thunderbolt port with support for up to 2560x1600 resolution
HDMI port with support for up to 1920x1200 resolution
DVI output using HDMI to DVI Adapter (included)
Support for dual display and video mirroring

Can I connect multiple displays using a mac mini

Can I connect 2 displays using the mac mini? If so, are there any accessories that I need? Are there certain monitors or connections that I should use?

Hello,
Assuming this is a 2012 Mini...
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html
If you need more...
http://eshop.macsales.com/item/NewerTech/VIDU3HDMIDV/
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

I can't use my Philips monitor with Mac mini

I can't use my Philips monitor with Mac mini, I am using a HDMI to VGA cable to connect them. But no signal on my Philips monitor.
My Mac mini is in a good condition, it can connect with my HDTV, the BENQ monitor at my office, but I can't make it connect with my Philips monitor.
I dun know what happen.
Please help!
Thanks!

The two are incompatible, HDMI is a digital signal and VGA is an analog signal. You need a monitor with a HDMI port or a DVI-I port, these are both digital signals. DVI-I gives the best output.

Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

Are you following these instructions?
http://support.apple.com/kb/ht4796
Have yo tired by connecting both to same network vice direct ethernet connection?
There is no direct USB connection

How do I transfer my pictures from my iMac to my new Mac Mini?

How do I transfer my pictures from my iMac to my new Mac Mini?

Are they in an iPhoto Library? If so:
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.

New 21" iMac as monitor for old Mac Mini?

At present my computer is an old PPC eMac with OS X 10.4.11. I want to buy an up-to-date 21" iMac. (I can't afford either the cost or the space for a 27" one.) But I have a mass of software and of files (a host of articles, etc., in that old warhorse, AppleWorks, for instance, and the scores of my musical compositions in an old version of Finale) which, for reasons it would be tedious to go into here, I cannot update so that they would work in the iMac.
If I buy the iMac, I want, for reasons of space, to get rid of my present eMac. But I have the offer of an old PPC Mac Mini with the same OS as my present eMac, to which I could transfer the contents of my present eMac hard disk. If I were to do that, I would want to use the new iMac as a monitor for the Mini. On the face of it, this cannot be achieved with the 21" iMac (only with the 27" iMac).
Is there any software or other adaptor-device that would permit this? I have looked at the EyeTV website, and it looks to me as if that is not what I would need. I should be grateful for any suggestions.

Help! As time rolls on, I get more and more ignorant, not more and more clued up! What is meant in this context by 'Sharing'? I thought I could completely separate the two operations:
1. Forget all about the new iMac. Connect the eMac to the Mini and copy everything at present on the eMac to the Mini. Then abandon the eMac — put it into the garden shed or sell it; forget it ever existed. The Mini is now my computer, with all my software and files on it.
2. Pretend that I never had an eMac. Hook up the Mini to the new iMac via an adapter and hope that everything that is and everything that happens on the Mini will show up on the iMac's screen.
Is that not right? I want to get the eMac off my desk because it takes up too much room, and I want to have an iMac there instead.
Sorry to be so obtuse!

27" iMac as monitor for 8-core Mac Pro with Dual DVI card... what cables?

I have a Mac Pro 3 GHz 8-core Intel Xeon processor with the NVIDIA GeForce 8800 GT card with two DVI ports for output. One goes nicely to an external JVC monitor, but I would like to get the 27" iMac as a monitor for the Mac Pro. Has anyone heard of, or done this? What cables and connectors would be required?
Cheers everyone.

Actually that is only one solution. The converter is not a cable, but a black box. So you need the two cables I mentioned to make the whole process work;
Mac pro -> DVI to DVI cable -> DVI to m-DP converter -> m-DP to m-DP cable ->iMac
This article mentions the three that have come to market.
http://lowendmac.com/ed/bashur/09db/dvi-to-mini-displayport.html
The first two are expensive and very expensive. The third does not appear to support content protection schemes, so a lot of new digital video sources would not make it to the iMac's display.

Answer for connect IMac via monitor for Mac Mini

Similar Messages

Maybe you are looking for