Answer me and I WILL Give you Cookies

Hi,
We want to deploy an Outbound application based on Callmanager (4.0), we have one Publisher and one Subscriber. 150IP-Phones. the outbound application will have 3 calls for one agent.
What i want to know :
Do our CCM have enough capacity to handle this new application or should we better consider adding a new subscriber?
JayD will give u 5 if you answer good ;)

One subscriber is enough, since all the database and applications is handled by the publisher.
HTH
//Jorge

Similar Messages

There is am add-on that lets you stop over a word and it will give you the opitions of looking uo futher info but I can't find it.

I have an account but it's not accepting my pass word so I had to re-register. That's not my problem though. I don't have a real problem I love Fire Fox but my system crashed and I'm starting all over again. There is an add-on that let's you stop over a word on any page and it will give you the option of looking up more info on that subject ( I think from Wikipedia, but not sure?). It will give you a little box like a comic strip person talking and then you can go to the box. You can then click on the box to get more info. I can't find this anywhere, can anyone help? Thank you.

What you want is APTURE HIGHLIGHTS but unfortunately it is buggy as I found out: [[https://support.mozilla.com/en-US/questions/786091|see thread here ]]

Please answar the 4 simple questions, i will give you full points

HI
Gurus
My qeustions are
1. SAP System standard Asset upload transaction code?
2. My system date is 21.09.07. But in SAP it showing 22.09.07. where i can change date settings in SAP. i want equal as system date.
3. what is the difference between Busines Area, Business place
4. what is validation and substitutions.
I will give you full points.
Thank you
Anil

hi anil,
1> Asset Upload
AS91
2.
For the date change, u have to change in the Ideas if u are using the Test server, in the remote server login place.
3. Business area
Your financial Statement will be genereted through business area. Business area is and independent unit which you don't assign it to a particular company code.
Business area is defined in accounts but for reporting purpose u can use it for mm as plant is assigned to it also in sd as so is assigned to it. As far as fi is concern fsv is not very clear from business area .This is all about standard reports
By making abap development u can use business area in fi with highest accuracy. For eg. by abap reports assign ur user to specific business area u will get perfect reports. thus u can use the business area with abap development for getting business area wise reports
Business area is across company codes in a company. There is a customization to activate the business area for the company code. When you activate the same , the business area is the required field in the postings.
Business place is indicates the address. At the time of generating any tax certificates business place is required. for an example generating remittance challan at that time u have to specify the business place.
4.
With the validations and substitutions software, you can validate and/or substitute data at the time of entry - in the FI-SL System and other SAP Systems.
You do not need to change the standard system to customize your validations and substitutions. For each installation, you can define exactly which validations and substitutions are necessary to ensure the integrity of your data.
Validations
In the SAP R/3 System, almost all input values are validated by a program or against tables or master files. Since some types of validations cannot be standardized, you can use FI-SL's validations program to create validations for your system.
With validations, you can check values and combinations of values as they are being entered in the R/3 environment. Validation rules are stored in the Rule Manager; as data is being entered, the Integration Manager validates the data against the validation rules stored in the Rule Manager. Because validation occurs before data is posted, only valid information enters the FI-SL System.
http://help.sap.com/saphelp_45b/helpdata/en/5b/d2221443c611d182b30000e829fbfe/content.htm
Assign me the points....
Ranjit

"Your membership will give you access to everything you see below", but doesnt include "everything"?

Hi
I see from the current current cs customers special offer and the non-discounted monthly/annual version of Creative Cloud that on sign-up, it states "Your membership will give you access to everything you see below" - and lists some icons, but this list doesn't contain the whole set of applications available as per : http://www.adobe.com/products/creativecloud/buying-guide.html
Sorry, if I'm missing something here - I'd like to learn Premier, but it's not listed in the list of applications, as per sign-up page/s.
Kind regards...

I see, and if I simply sign up to a paid subscription, and don't download none of the applications at all - then I can leave it at that, and only download when I have my new PC? I'm actually in the middle of sorting this out, so I want to get this subscription task out of the way, neither do I want to download any of the apps onto my current system (an over heating 2002 laptop) because it doesn't meet none or any of the tech specs - I understand your point on deactivating.
Thanks again Ken

Can someone take the eyes of one photo and move it to the other? . we took family photos and his eyes are all squinting except in 1 photo and my wife wants those eyes on the a different picture. please email me at Dunworth.m Gmail and i will send you the

Can someone take the eyes of one photo and move it to the other? . we took family photos and his eyes are all squinting except in 1 photo and my wife wants those eyes on the a different picture. please email me at Dunworth.m Gmail and i will send you the photos. i can pay pal you like 5 bucks apon completion

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

Hi yours, and it will be sent to O iphone 5s Mobicom Co.? I want Mobicom LLC coming by? apple company iphone 5s faster sent to do Mobicom LLC. When Mobicom LLC phone 5s in the next, and it will send you in the gym did Mobicom LLC ready to send. :))

Hi yours, and it will be sent to O iphone 5s Mobicom Co.?
I want Mobicom LLC coming by? apple company iphone 5s faster sent to do Mobicom LLC. When Mobicom LLC phone 5s in the next, and it will send you in the gym did Mobicom LLC ready to send. :))

What the **** are you on about?
Do you have a proper question to ask? If so ask it in a proper and understandable way.
What you have typed here is just plain gibberish!!

I download songs directly to my iTouch due to a computer crash. I am still running an old iOS system. Just notice yesterday I cannot download albums any longer just songs to my iPod? I go to ITunes store. Open a music file to download and it will give

I download songs directly to my iTouch due to a computercrash. I am still running an old iOS system. Just notice yesterdayI cannot download albums any longer just songs to my iPod? I go to ITunesstore. Open a music file to download and it will give me the opportunityto buy every song but the album and songs that go with the album only. Thebutton is not accessible for an album purchases. Any assistance would behelpful.

No one has had this issue? I go to Itunes store. Open a music file to download and it will gives me the opprotunity to buy every song but the album and songs that go with the album only. HELP

I am sorry nhylo this your answer I hope it will help you

MAC OS
iMac
There are several versions of the iMac computer. The first two versions (referred to as revision A and revision B) were colored Bondi Blue. The next version (referred to as revision C) was introduced in January 1999 and came in five different colors.
Revision A and B iMac computers support IrDA, but not IRTalk. Revision C iMac computers do not support infrared communication of any type.
PowerBook G3 Series (Lombard and Wallstreet)
PowerBook G3 Series computers are IrDA compliant.
PowerBook G3(Pismo or Firewire)
The PowerBook (FireWire) supports IrDA.
PowerBook G4 (Titanium) and PowerBook G4 (Gigabit Ethernet)
The PowerBook G4 and PowerBook G4 (Gigabit Ethernet) support IrDA.
BLUETOOTH
Bluetooth is a short range radio link meant to replace the necessity of cables to connect portable and/or fixed electronic devices. The Bluetooth protocol uses a combination of packet and circuit switching to transmit data through variable hop frequency. Connectivity across a network is provided according to time slot division. It provides point-to-point or point-to-multipoint connection, creating links for between 2-8 devices (including the initiating Master/host and its Slave/s) to form a piconet. Multiple piconets that are linked together form a scatternet. A Master in one piconet can be a Slave in another, and vice versa, to form an inter-connected network. Dial-Up Networking, Fax, Headset, LAN Access, and SIM (Subscriber Identity Module) Access functionality all use serial port communication profiles and virtually emulate RS232 (or similar) serial cable port protocols.Ê A Bluetooth management application is necessary in each device to facilitate the serial port emulation. Radio Frequency Communications (RFCOMM) is used to transport user data, modem control signals and configuration commands.
When using a cellular device equipped for Bluetooth communications to transmit data over a cellular network, the Bluetooth link must be established as an initial protocol layer and the cellular network link is negotiated in a second protocol sequence through the cellular device. For example, when attempting to connect a Pocket PC device to the GPRS data network using a cellular phone as a negotiator via a Bluetooth link. The connection is initiated and controlled by the Pocket PC device, but dependent on the SIM functionality available through the cellular phone to negotiate and establish the connection to the cellular network. In this capacity, known as a SIM Access Profile, the cellular phone functions as a Server (or ÒaccepterÓ) while the Pocket PC device acts as a Client (or ÒinitiatorÓ). A Client may have access to only one Server with a SIM at any given time of active connection. Designation of a Client versus Server role is independent of the deviceÕs discover/discoverable status.
To ensure secure communication between the Client and Server devices, several conditions must be met. The Client and Server must be successfully Bonded (otherwise known as Paired) before setting up a SIM Access Profile or configuring the settings of a GPRS/GSM network connection. The SIM bearer (cellular phone) must be properly enabled to initiate authentication. The link between the Client and Server will be encrypted using the Bluetooth baseband and will be at a minimum of 64 bits. Each incident of authentication will be identified with a unique Passkey between the devices that must be in mutual agreement at the time of connection.
Bluetooth transceivers operate in the 2.4 GHz ISM (Industrial Scientific Medical) band. In a majority of the countries in the world this band includes 2.400-2.4835 GHz. Please note that products that implement a reduced frequency band will not work with those that implement the full frequency band. These products that are reduced in frequency (perhaps distributed in different countries), are generally intended for use in a single market. As such, devices developed and/or purchased in Europe and Asia (for example) may not be compatible for use with devices from the United States.
For more general information about Bluetooth development and technology, go to www.bluetooth.com, the official Bluetooth website. Select the link to Bluetooth technology & you to find links to Using Bluetooth technology, Products, and How it works. In the Using Bluetooth technology section, there is a link to view information about connecting a Mobile Phone with a Personal Computer. Here you can view links that include all currently supported and available devices that are applicable to your needs. This will be useful to verify the compatibility of your devices. You can find specific information about the technical details and requirements of modem data transmission using cellular technology with Bluetooth by proceeding to the Developer Information section and viewing the SIM Access Profile and v.1.1 Profiles documentation.
For more info about using Bluetooth technology with Mac OS X and Apple products, go to www.apple.com/bluetooth.
GENERAL DIAGNOSTICS WITH BLUETOOTH
* Make sure that your Bluetooth devices are compatible.
* Your operating system should be current on all applicable software, driver, and firmware updates.
* Verify that the Bluetooth functionality in both devices is turned ÒOnÓ.
* Verify that the devices are currently bonded/ paired. This can often be difficult to assess with the Nokia 6310i. The phone may not show the devices as ÒActiveÓ, but the Bluetooth Manager will display that the devices are paired/bonded. Often the phone will display a Disconnected message. Disregard this message and continue with the instructions in the setup guide.
* Ensure that the Bluetooth Dialup Modem is selected in the Connections (for Pocket PC devices), System Preferences/ Network (in Mac OS X), or Dial-Up Networking properties (in Microsoft Windows OS).
* It may be necessary to attempt to connect multiple times to establish a GSM/GPRS connection. Do not be discouraged if you receive a connection error or receive a Disconnected message on your cellular phone. Due to interference or early product development, it may take several attempts to push the connection through all layers of the Bluetooth service and protocol stack. It is also possible, as is seen with the Nokia 6310i, for a Disconnect message to be given while transfer protocol layers of communication are still recognized and active. In this case, a temporary minor error (Òdata not availableÓ or Òcard not accessibleÓ) is the cause as the Client device attempts to initialize and access the SIM for data packet transfer.
* Verify that you are not in the presence of equipment that may be interfering on the same (or possibly overlapping) radio frequency as your Bluetooth communication. This includes medical equipment, wireless 802.11 connectivity devices, other Bluetooth enabled cellular phones, airport communications, amongst other factors.
* It may be necessary on some devices to alternate in the bonding/pairing process between setting the phone in Discover versus Discoverable mode, as is sometimes the case with the Sony Ericsson T68i.
* Verify that your devices are fully charged.
* Verify that you have GSM/GPRS coverage available at your location and that your wireless account is properly provisioned for data transmission with a modem over the network.
* Check that your connection is using the correct Dialing Location properties and profile. For a GPRS connection, this should follow the instructions to include the letter G in each of the three dialing location fields of the Dialing Patterns specifications as well as verification that the phone number to be dialed is *99# and that the Area Code and Country Code fields are not included in your connection.
Alternative methods of Pairing/Bonding for the Nokia 6310i and iPAQ 3800/3900 series device with Pocket PC 2002 Operating System
If you are experiencing problems due to interference, or if your signal strength is not very strong, modifying the serial port connection may allow you to connect to the GPRS network.
* Open the Bluetooth Manager application on your Pocket PC device.
* Verify that the Bluetooth on your handset is currently On. (You may want to check the power level on your devices.)
* If your Nokia 6310i is not seen as an available device, tap on Search and proceed to locate it and Save it to a group. Otherwise, tap on the Nokia 6310i icon.
* Tap on Actions.
* Select Set as Bluetooth Dialup Modem.
* Tap Actions again.
* Select Connect to COM 1.
* Press Accept on the phone to connect with the Pocket PC device.
* Enter a unique Passcode onto your handset.
* You will have 10 seconds to enter the same Passcode/PIN code onto your Pocket PC device.
* Your phone will notify you that you are connected. You can verify this by scrolling through the Bluetooth menu on your handset and selecting View active device.
* You will have 3 minutes to proceed before your Bluetooth session will time out.
* Proceed to connect using the usual methods outlined in the setup guide.
* You will be notified that the Serial style= style=Port style=connection was terminated . Tap OK and continue anyway. It may take several attempts to get the Bluetooth stack to respond.
* Press Accept to connect to the phone once more.
* The phone will now notify you that a GPRS connection is in progress.
The following method may also be useful if the bonding appears to be unstable and multiple attempts to connect through the Connection Settings fail:
* Open the Bluetooth Manager application on your Pocket PC device.
* On the phone, scroll to select Bluetooth from the main menu, then select Bluetooth and select Off.
* Turn your phone off, then on again to fully reset its Bluetooth protocol stack.
* On the Pocket PC device you should see the Nokia 6310i listed. Tap to select it.
* Tap on Actions.
* Select Remove bond with this device.
* Tap on Actions again.
* Select Remove this device.
* Tap Yes when asked if you want to remove it from all groups.
* Close all open windows on your Pocket PC device and tap on the Bluetooth icon on the lower left corner of your screen.
* Select Turn radio off.
* Soft reset your device according to manufacturerÕs instructions.
* Tap on the Bluetooth icon on the lower right corner of your screen again and select Turn radio on.
* Turn the phone back on, scroll to Bluetooth from the main menu, then select Bluetooth and select On.
* Open the Bluetooth Manager application.
* If you do not see your device listed, tap on Search.
* Tick the box to select your phone, choose a group and select Save.
* Tap OK.
* Tap on the Nokia 6310i icon.
* Tap on Actions.
* Select Create bond with this device.
* Enter a unique PIN code.
* Press Accept on the phone when prompted to Pair with the Pocket PC device.
* Enter the Passcode/PIN code. You will have 10 seconds to complete this task. (If you receive a Disconnected message on the phone, continue anyway.)
* Proceed to set up your connection as usual through your Connection Settings.
* If you are not connected the first time, tap Connect to try again immediately after you receive the Disconnected message on the phone. It may take several attempts to get the Bluetooth stack to respond.
* Press Accept on the phone to accept the connection.
* The phone will indicate that a GPRS connection is in progress.
The processes for troubleshooting Bluetooth in a Windows environment are very similar to those of Pocket PC devices.
* In the Bluetooth Manager application, proceed to click on the Nokia 6310i and select Unpair device, then proceed to turn the Bluetooth radio Off on the computer and on your phone. Reset both devices, then try again. This should clear any temporary problems in the Bluetooth service and protocol stacks.
* It may be necessary to attempt to establish your GSM/GPRRS connection multiple times before you will actually be able to transmit data over the cellular network.
* Verify adequate power level on each device.
* Resolve any issues that may exist with your cellular account or wireless coverage in your location.
* Other wireless electronic devices that operate in (or near) the Industrial, Scientific, and Medical bandwidth may provide significant interference. These include other cellular phones, 802.11 devices, medical equipment, airport communications, amongst other factors.
* You must select secure encryption to be used when creating the bond with your devices in the Bluetooth Manager.
USEFUL AT COMMANDS
When GPRS doesn't appear to be working, or you just want to check that all is well, hopefully the following will prove useful:
Check the phone
Verify that GPRS is currently available in your location and that your cellular account is properly enabled for data transmission over the network using your device as a modem.
If all appears well on the phone, head to HyperTerminal or your equivalent Terminal application and try some of the following style=to further query the status of your ability to communicate with the network:
at+cgatt?
If a value of '1' is returned, then we have GPRS attached. If the value is '0', then GPRS is currently deactivated (i.e. the service is either down or the user is not currently provisioned).
at+cgatt=? will return the supported values for the command
at+cgatt=1 will attempt to attach to the GPRS network
at+cgdcont?
This will allow you to check that the Access Point Name (APN) has been set correctly.
A typical response will look something like this:
+CGDCONT:1,"IP","proxy"
If the APN is set incorrectly for the AT&T Wireless GPRS service, enter the following:
at+cgdcont=1,"IP","proxy"
at+cops?
This will return the identity of the network operator.
at+cgreg?
This will return the network registration status.Ê One of the following values should be returned:
0 - not registered, not searching
1 - registered, home network
2 - not registered, searching
3 - registration denied by network
4 - unknown
Ê
Top
Ê

You welcome

HT5787 what happens when someone sell second iphone and does not give you the correct password

what happens when someone sell second iphone and does not give you

If you are talking about activation lock you are out of luck. Without that information you cannot activate the device and have just lost your money. Unless you can find the person and get your money back.

How do I use Edge Animate to make a clickable image which can be used in Author, and which will redirect you to a different page in your ebook?

If anyone has experience with Edge Animate, I know that I can make an image clickable, and I can insert a url to define where it will go once clicked. But I want to make a widget to use in iBooks Author, that can take the reader to a certain page of the book. Is this possible?
It all seems very complicated. Make one thing in Edge Animate, then somehow have that reference something in Author, which will finally work in an ebook. I have no clue where to begin.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

How to make a java program that will give you the list of files in the dir

How can you make a program in java that will list all the files in a directory with out useing the File,FileWriter,FileReader,InputStreamReader,FileInputStream,RandomAccessFile etc. classes

What is with these instructors? So far today I have
seen
Do something 100 times, but don't use a loop
Format numbers, but don't use NumberFormat
and now this.
What are these people trying to teach?
Java??? I don't think so.Perhaps it is because these instructors are learning Java at the same time as their students. They are only one chapter ahead of the students. :(

Is there a code checker that will give you the correct code?

I have a website that I started using a bought template, I deleted all of the content except the navigation buttons. The problem now is that there are ALOT of broken links and coding errors. Is there a site that will show me what the correct code should be?
www.cfaai.com
Heidi

Hello Heidi,
I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
For this reason, to manage, for example, several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and
http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server.
Good luck
Hans-Günter

What application to use to clean a macbook pro? I heard that some will give you viruses?

I am trying to clean my MacBook Pro since I only have 114.6 GB left in HD. I tried installing that robo icon that cleans your mac but was told it could give me viruses. I am super confused. Can someone help me just clean it without giving me the run around?? Thank you

"Only" 114 GB left? That is plenty.
Whatever you do, do not download or install any product claiming to magically "clean up" or "speed up" or "optimize" your Mac. Without exception, they will do the opposite. If you already did, you found the problem. Fix it.
If you installed MacKeeper, get rid of it now. It is junk that will cause only misery. Follow the instructions to delete it with care.
Do not install such junk on a Mac. OS X already includes all the utilities it needs for you to delete unnecessary files.
General Mac maintenance: Tips to keep your Mac in top form
That is all the maintenance a Mac requires. Really.
If you have been accustomed to using Windows, this will come as a shock to you. Get over it.

I will give you $350 to take my Yoga 10HD+ away from me

The hardware looked great on paper, but the software is full of bugs, and customer dis-service has no process by which to hear what these bugs are and process them. The moderators here bury each complaint under old threads, making sure that nobody sees it except in the tiny window between when it first goes up and when it gets buried or removed. (I fully expect this to happen to ths post).
I may finally overcome my distaste for Apple and go get an ipad. At least Apple treats their customers with respect, instead of blowing them off after they've gotten their money.

Send it back like I did - took 15% hit on restocking fee but that's better than living with a glitchy tablet. Don't get me wrong - the hardware is OK - the software sucks. Instability, lags, scrolling performance problems etc all little things quickly add up to make for a unpleasant experience. May be Lenovo will step up their game and do a lot better next time. (Also, leave Moto alone!!)

Is there any way to do a manual session restore if Firefox doesn't open your previous session - and doesn't give you that option?

I've got Firefox configured correctly and it always opens my last session. However, sometimes when the computer crashes and a second Firefox window is open (this time it was either a pop-up window or the Firefox update window), Firefox only recognizes that window as the "last session," and it loses the most recent multi-tab session. (Hmm, maybe what I need is "re-open recent sessionS" or "last multi-tab session" ?!)
Anyway ... is there any way I can retrieve yesterday's open tabs without picking through my history and finding them one-by-one?

The presence of a sessionstore file with a number (sessionstore-1.js) indicates that at one time there has been a problem with accessing sessionstore.js and that Firefox wasn't able to rename sessionstore-1.js to sessionstore.js
You can see by the file date of sessionstore-1.js when that has happened and if it an old file then you can remove it or you can try to copy that file to sessionstore.js to see which session it brings back.
Make a backup copy of all sessionstore.* files elsewhere to be sure that you do not lose a session before doing that.

Answer me and I WILL Give you Cookies

Similar Messages

Maybe you are looking for