Answer to web sites not publishing (?)

My web site refused to publish on upgrading to ilife 09. I read the blogs carefully. I followed the instructions posted by 'jravin' under the 'why did I upgrade?'
DO NOT just 'publish' and expect your site to go from red to blue.
Go to *'file - publish site changes'*.
Brilliant and only 15 minutes of aggravation instead of days.
Thank you 'jravin'. Whoever you are you are a genius.

Thanks. However, I had decided to do a reset using the reset button on the settings page which, as I understand it, returns the iPad to its factory settings and this seems to have completely cured the problem.

Similar Messages

  • Gallery web site not found

    I published a 35 photo web gallery I thought successfully, but when I go to the url listed at the top of the photo event folder, I get a web site not found error. The photos did upload to the iDisk in the "sites" folder, but it would apppear no web page was created.. there is a web gallery icon to the right of the photo album name that was uploaded.. I have upgraded my iPhoto with the latest ver via software update.. any thoughts??

    Welcome to the Apple Discussions. Try making some minor change to the gallery and republish. See if that will jump start the online gallery. If that doesn't work, mount the iDisk, go to the Web/Sites folder and delete the contents of the _gallery folder (assuming you only have one gallery). Then republish again.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Some web sites not working in FF but they are OK in Safari.

    A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
    Thanks,
    MJT

    Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Please reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
    OR
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    See if this helps solve the issues you had and please report back to us!
    thank you

  • I have already download mozila but some web site not open

    some web site not open on my handset

    are you getting any error?
    could you provide the website names?

  • Flash player download web site not working

    After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
    http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

    Hi eidnolb,
    My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
    Date: Wed, 14 Apr 2010 10:01:33 -0600
    Subject: Flash Player flash player download web site not working
    Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
    With that information, I'll be able to give you instructions and the links you need.
    Thanks,
    eidnolb
    >

  • Iweb site not publishing

    I modified my web site and I am trying to publish it but it will not publish any change. I am not using mobile me but ftp publishing

    Publish your site to a local folder and launch this in the browser by double clicking the index.html file to see if the changes are present in this version. If they are then your problem is with FTP.
    Always empty your browser cache after updating and before visiting your published site.

  • Why is my web site not pulling up in fire fox???????????????????

    My weebly, what i used to design my web site / domain's, www.idckotao.com are not popping up in fire fox.. In fact the help stuff is useless as I do not have a fire fox button it now goes into this stupid fekking full screen mode after the last dumb ass update.
    I am wondering of this is just my computer my web site is not showing up on or every one's who uses fire fox.

    You can switch Firefox's full screen mode off using:
    * F11 function key
    * slide mouse pointer to the top of the window > right-click > Exit Full-Screen Mode
    If the full screen is generated by a plugin such as Flash, press the Esc key to return to normal.
    If all else fails, press Ctrl+n to open a new window, which should be a normal window.
    Now, about your site. I can see it on Windows 7, and the top buttons work and some of the home page buttons work.
    Hopefully the steps suggested by cor-el will help you. You also may need to delete your cookies for the site (either for your domain or for the editor domain, if it's different). Save any pending work first.
    While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.

  • Personal web site not showing up.

    Problem:
    neither web sites appear when using 192.168.2.149 ip addresses.
    blah, blah . . . so, after setting the Personal Web Sharing tab, the bottom tells me that I can access the computer web site via http://192.168.149 and my personal web page via http://192.168.2.149/~calbruin.
    When opening the links, nothing shows up but the error saying that server is not found.
    When I type 127.0.0.1, that gives the generic computer web page (found in Library/Webserver/Documents) alerting me that Apache is installed.
    Question is, why does not the 192.168... address work and why not the personal Sites Folder accessible via 192.168....?

    The only change was turning off and then turning on the Personal Web Sharing.
    Most likely needs this...
    Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Trash this file...
    /Library/Preferences/com.apple.sharing.firewall.plist
    reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Set up Sharing again.
    Message was edited by: BDAqua

  • Gasbuddy web site not working properly with firefox, but working fine with explorer

    I've noticed when I load the web site gasbuddy.com, it is not working properly. It does load, just not performing like it should. When I try using gasbuddy.com on explorer 9, it works fine. I've already tried working in safe mode and that didn't solve the problem with gasbudy.com. Any suggestions as to how to fix the problem? I did do some prior investigating, and I'm very cautious about removing my cookies. It seems when I do that procedure, I lose too much info on certain web sites----weather.com, weatherunderground, etc. Just not sure how to remove cookies to solve a problem with out causing other problems? Thank you.

    I'm glad we were able to figure it out. Many sites are designed with stretchy columns that work with either full zoom or text-only zoom, but definitely not all of them.

  • How to view HR photo from a web-site NOT using ArchiveLink NOR ContentRep.

    Hello,
    We have a web site where ALL our employees' photos are maintained.
    It is accessible via HTTP with one of the parameters is the ID number of the employee.
    Is it possible to customize the PA in such a way that it will display the photo in the SAPgui by accessing the photo using a URL ?
    For example the following URL:
    http://<server_name>:<server_port>/hr_photo/EMPLOYEE_ID.jpg
    Please, help.
    Thanks and kind regards,
    Gil Halevy

    I know what you are asking for but sadly, it is NOT possible without customization. I have had 2 past clients with this issue....typically they had the employee photos on some common intranet server in some folder and simply referenced them by "(username).jpg" through some kind of custom employee directory app/web page. Since ESS services, many MSS services, HRAS services, etc. via the portal and then also SAPGui transactions rely on the ArchiveLink config for photos as standard, we had to load all the photos into ArchiveLink and do it the "right" way. It actually is VERY easy to do. The added benefit that the clients like too is that you can have SEVERAL photos (such as photos over time) for a single employee (since there is no longer the dependence on the naming of the image file such as (employee#).gif or (userid).jpg. Sooooo....sorry I don't have the answer you wanted, but hopefully my answer helped.

  • WEB SITE NOT OPENING

    I have uploaded a web site using Cyberduck.
    I opens perfectly using Firefox but will not open in any other browser saying "forbidden - you do not have permission to access".
    Can anybody enlighten me as to why this happens?

    What's the URL of your site so we can examine it first hand?
    OT

  • Work web site not Safari compatible

    On my macbook I use FireFox, since my work's web site does work with Safari. What can I do with my iPhone? Can I load Firefox? Please help.

    Nope. Sort of sad the site won't work with Safari. Guess they did not adhere to web standards of have bad coding.

  • Quicktime web site not work

    Help!!
    I loaded my new web site at godaddy. It has several quicktime audio files. They play fine on a PC but on a mac when you click on the link you just get source code?? They used to play fine when I had the site on .mac.
    Any thoughts. The site is www.eugeniagarrity.com Click on music links.
    Rick G

    Any idea why they would be being uploadd as text?Not an expert in this area, but assume this is done automatically by "PC" oriented servers (which don't expect Mac users whose system/software tends to be "more standardized/literal minded") in order to save the files in a binary/binhex format.
    Also other folks have told me they can play the music file but they get a dialogue box when they click on it and chose quicktime and it plays.How the files are recognized/handledl depends on the system/browser being used. For instance, you indicate there is no problem playing the files on a PC. On a Mac, Safari opens the file as "text" while FireFox will initially (i.e., no preference previously stored) ask whether the file should be opened in QT (or other "open with" application) or saved to hard drive.
    One more thing I noticed. If you right click on the link and select download, it will download the actual music file and you can open and play it.Once again, this is system/browser dependent. Some systems/browsers download the file with the "mp4" extension and others with the ".mp4.txt" double extension. Of course, if the latter happens all you have to do is rename the file by deleting the final ".txt" and the file plays correctly.

  • Uploading web site not made by iweb

    My son created a web site in school using HTML code. It has about 6 pages of text and music, plus 2 Quicktime movies. I uploaded it to my iDisc, but I don't know how to publish it to my dotmac account for others to view. Is there a way of doing this? Would I use iWeb somehow? Thanks in advance!
    iBook G4   Mac OS X (10.4.8)  

    Hmmm, I did exactly as you said, varkgirl and jabberwock. The Portfolio folder has 45 items in it-HTML pages, .mov files, .gif files, etc. I uploaded the entire folder to the SITES folder on my iDisk. I can see all the files when I check the iDisk on dotmac. Then I clicked on HOMEPAGE,scrolled down the left side to ADVANCED. The theme is External HTML. But only the HTML files show up and they don't link to the original files, so I get an error code. I also get a 404 error code when I try homepage.mac.com/username/foldername/pagename.html, substituting my info, of course. Does it sound like I'm doing everything correctly? Thanks for your time and help!
    iBook G4 Mac OS X (10.4.8)

  • Mac pro web sites not being able to access

    having problems at accessing web sites since installing lion for example i tried to access ebay and wouldn't load waited & waited & waited gave up in the end and had to use my old toshiba laptop this worked fine so nothing wrong with modem or router   wife iPad accessed okay please can anyone offer any help
    Before installing lion access was okay to all sites
    Thanks
    Dennis

    You are right!!I had to disconnect from the default  router, then "force" the connection to the unit even though it was not connected to internet and then I could access the unite manager. This allowed me to set up a different APN and I can now connect to the Bahamas Telephone Co Network through my unlocked aircard! This is a savior because I could find any aircard or dongle anywhere for sale in Grand Bahama.Thanks so much for the help! Cheers,  

Maybe you are looking for

  • Move Mailbox from Exchange 2007 to 2013 creates additional Contacts and Junk E-mail folders in Outlook Clients

    I have moved a handful of mailboxes from my Exchange 2007 server to my new Exchange 2013 server.  When the users logon to Outlook, usually Outlook 2007 Pro, they have a new default Contacts folder and Junk Email folder that are empty.  I have to copy

  • Print a report to a printer (server-side printing) Error

    <p>Hi ran into some hiccups following a sample from crxi_r2_jrc_desktop_samples</p><p>JRCPrintReport</p><p>I am attempting to send a report for printing on a Thick Client Application.</p><p>This is the error.</p><p align="left">- All configurations c

  • Link button on Grid

    Hi everybody:    Just I'd like to know if I can have a link button in a grid object, such as it exists in the matrix object, an how i can get it.    Thanks in formward   Regards.   Misael Reséndiz.

  • Dell U2413 monitor thunderbolt connection problem

    I am trying to connect a Dell U2413 monitor to my mac computer. I have two macs, an early 2011 macbook pro and a mid 2011 iMac both computers are running Maverics software.I am trying to connect with a Thunderbolt cable from the computer to the mini

  • Oracle 9i Dataguard some questions.

    Hi, I have some doubts regarding the Data guard redo log transfers from Primary to Stand by. 1. In Oracle9i is it really the archived redo logs that are transferred to the standby database or the online redo logs? 2. Is automatic fail over to standby