Answering calls from car no longer works with iOS 8 update

After updating the firmware to iOS8 my iPhone no longer answers calls from my car bluetooth audio. I get the call alert but the car answer button is disabled.. I am using standard bluetooth communication and not the A2DP technology.
Is anyone facing a similar issue?
I am using iPhone 5s

I know that I had to delete the entry in the car's Bluetooth setup (for Steve's iPhone - replaced and iPhone 5 with 6) and then go through the setup again to get it to work. Perhaps that would solve your issue?

Similar Messages

TS2755 Messages no longer works with iOS 6.

Messages no longer works with iOS 6. Done all the checks, everything that's recommended. Zilch

Had the same problem after updating to ios 6 could not send-recieve text messages at all. Did a restore on iphone same problem, changed setting same problem. called at&t they said they is a problem the ios 6 that changes setting at att take techline 15 minutes and imessage and text messages working ok

Active Sync certificates no longer work with iOs 4.3

Existing Active Sync certificates no longer work with iOs 4.3. Can I fix this?

My results differ from yours.
With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

Ipod out no longer works with iOS 6.1

As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
Now, all I get is a constant "Reading" indicator and can't get past this point.
Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
Thanks

Try this.
Go to Settings>General>Date and Time>Set Automatically>Off.
Set the date one year ahead. Try to get email.
If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

Menu bar no longer working with IE update

With the recent update in IE my main menu bar is no longer working, the "hover" function is not working and looks like the links are broken, but the links do work if you actually click on them. From my vista machine it is OK but from my XP machine it does not show as being a link. The submenu's however do still work, here is the code, the first line is from the main menu and doesn't work, the 2nd line is a submenu and does work.
Here is the site www.conundrumadventures.com
From the main menu this is the code for "Adventures":
<td id="002" class="link4" onclick="location.href='Teambuilding-Exercises-Adventures.php'"; onmouseover="changeC('002','link4h');" onmouseout="changeC('002','link4');" >Adventures</td>
        </tr>
        <tr>
From within the adventures page here is the code for the submenu for "Conundrum Metro":
          <td id="303" class="Sublink4" onclick="location.href='Outdoor-Team-Building.php'"; onmouseover="subchangeC('303','Sublink4h');" onmouseout="subchangeC('303','Sublink4');" >Conundrum Metro</td>
        </tr>
Any ideas how to fix the main menu bar?
Thanks
Lynn

I recommend doing away with your mouseover/mouseout links and convert to using Cascading Style Sheets.
Here is a link to CSS tutorials: http://www.adobe.com/devnet/dreamweaver/css.html
You don't say whether you are using Dreamweaver CS4 or an earlier version, but even if you are using that earlier version, you can type the code in yourself. Look especially at the tutorial chain "Designing with CSS", as there is a module that talks about a menu bar and how to make the links.
Best wishes,
Beth

AirPrint no longer works with ios 5?

I can no longer print from my print app print n share. I used this app to
Print my "drivers log book" app. Tech support from print n share said
Apple took away the feature to print through all print apps that send wifi
Straight to the printer. Why would apple do this?

It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers. Here's a fix that works on my imac, but should also work on even a windows pc.
My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
Install ubuntu 11.10 in a virtualbox vm. Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware. Make sure the imac's usb printers are setup with sharing. On ubuntu, select System Settings > Printers and add your imac's shared printers to the list. Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it. Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
references:
http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

IPad 2 hdmi connector no longer works with iOS 7.3

Hi any one else had this issue? I have always connected my iPad 2 to my tv via a apple made hdmi connector, used mainly for fils on netflix eat. Since firmware updated to 7.3 this no longer works. Is this anther apple issue? My wife has an iPad 3, pre lightening and the "official" adapter has never works just get a message that states the attached accessory is not supported.... Any ideas anyone???

I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror. Running ios 5 the mirroring worked perfectly for sound and video. Don't remember if I tried while running 5.1. Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV. When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected. I have sound and video working fine except for the colors. The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync. I have changed the hdmi to a new one, but it didn't help. I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV. Leads me to believe it's an issue with the TV OUT function of the ipad. I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

HT1454 iphone 4, composite cable no longer works with ios6 update

I have the iphone 4, and I used an apple composite cable to watch youtube, videos, etc on my TV through an AV input. But when I upgraded from IOS 4 to IOS 6, it no longer works. Says something along the lines of "accessory not supported" or close to that. The iphone used to go into a display mode, where nothing shows on the phone's screen, and everything shows on the TV. But now it doesn't even do anything but give me an error message. Any ideas?
In sum, it worked before, but updated, and now no longer works.

It was the cable connector seating.
It looked fully attached, but on removal and FIRM attachment it worked.
If the AV iPod connector is not fully seated you get this error. The old iPod connector used a locking connection with a positive click, the AV cable uses a lockless connector that differs from the newer lockless iPhone connector. I suspect the AV cable connector was a transitional design that may have more connectivity issues.
Message was edited by: jfaughnan

Bluetooth in Subaru still not working with ios update

Bluetooth is still not working in my Subaru with my iphone 6. I've updated the iOS to 8.1, done most of the suggested tips I've read on line and my phone will still not find my car's (or my plantronic headset). Bluetooth does work with my jawbone speaker, but that's it. I'm looking for any new suggestions. Thanks

I just sold my Motorola RF-850 that was hooked up to my GTO today because it wasn't working with my IPhone.
I can't believe you paid for the Holden one.
Anyway good luck.
AcePilot

Playing Slowmotion video over airplay does not work with ios update!!!!!

after upgrading last ios , airplay to shoot slowmotion video does not work.
I was expecting it to be fixed with recent update, but still not working!!!
I use it for education at my clinic - which is essential, and how come apple does not fix it at all?
or apple should give downgrade option at least.
FIx it, fix it, fix it!
Main purpose of puchasing ipad air2 was to airplay slowmotion video to big screen and i am quite disappointed with my purchsing ipad air 2.

As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

Quicken download from Citibank no longer works with Firefox 4.0

I used to be able to download transactions to Quicken using Firefox 3.x with no problems, but now it doesn't work when trying to do the same thing using Firefox 4.0. There are two symptoms of the problem:
1) Clicking on Account Activity -> Download Statements from the initial page does nothing.
2) After clicking on "See All Account Activity" from the main account page, then clicking on "Download Your Statement", then choosing a date range and "Quicken" format, nothing happens, except that the page refreshes as if you hadn't clicked any date range or format.
If I set it up to use IE Tab 2, then it works OK, except that I then have to log in twice -- once on the main page, then again when it switches to IE Tab 2.
I would prefer not to use IE Tab 2 (or IE) to do this download, because I have more control over the download if it gets done via the Firefox engine.
I don't know whether FireFox 4.0 or Citibank is at fault here; I was able to use Firefox 4.0 to download a statement from a different credit card company yesterday with no problems.

n Firefox make sure you have at least two (2) tabs open - (Ctrl+T opens a new tab)
In the address bar of one tab, type "about:config" - minus the quotes, of course
You'll see a warning. Click "I'll be careful, I promise" and continue to the configuration page.
There's a search bar at the top. Type "js" - again, minus the quotes.
In the results you'll see pdfjsviewer.disabled with a vaule of false. Click it once, then right click it and choose Toggle to make the value "True".
Close that tab.
Click Tools>Options and go to the Applications tab
Locate Adobe Acrobat Document (or Portable Document File (PDF)) in the list and click the drop-down to select "Use Adobe Reader (in Firefox)". (Mine doesn't have that because I also have Acrobat Pro installed)
Click OK.
Click Tools>Addons to see that the Acrobat plugin is installed
Close and restart Firefox. PDFs should now open in a browser window with the Reader plugin.
Note: This doesn't work for me since the update to 23 and I should have the choice of Reader or Acrobat plugins. Firefox is trying desperatelt to FORCE users to use their crappy PDFJSViewer, which doesn't handle multimedis or forms PDFs.
As to the NPAPI and security risks, that's blown WAY out of proprotion. There are antivirus companies trying to sell their products to Mac users (who will NEVER need them) and they use this "urban legend" to bolster their case.

"Import GPS from iPhone" no longer working with iPhone 4 & 4S

Hi-
Since upgrading to the Iphone 4, the Import GPS from Iphone function has ceased to work. The phone appears on the import screen, and photos can be imported sucesfully (and the GPS data is embedded correctly on the photo), but when you go to the places window and go to the import gps from iphone function, the window opens like it's trying to bring up the photos but nothing appears.
This bug continues with the 4S. This function worked fine with my Iphone 3.
Has anyone found a work around for this? I'm surprised this bug has yet to be fixed.
Thanks
Matt

I have the same problem the screen is show something like this:
And never stops and show any photo.
In other way i want to use it to create an slideshow that scroll the map showing the photos, it is possible?
An update soon to fix this problem...
Thanks...

Apple Lightning to SD Card Reader no longer working with iOS 8.0.2

I just tried to copy photos from my wedding to my iPhone 5 and iPad Mini w/Retina(both with iOS8.0.2), and I get the message "This device is not supported". I find this odd, as it is the official Apple branded SD card reader.
Does anyone have any ideas as to why this would all of a sudden not be working? I had no issues prior to updating to 8.0.2.
If it is just this version of iOS, I do hope that it is fixed in 8.1.

The lightning to SD card reader has NEVER been supported on the iPhone only on iPads
Compatibility
Questions about compatibility?
Call
0800 048 0408 or Chat now
iPad models
iPad with Retina displayiPad miniiPad mini with Retina displayiPad Air
To sort the iPad suggest you restore the device especially if you did the update ovrer the air

Windows magnifier no longer working with latest update

Hi Team
'''Accessability Issue'''
Since I have had an update from your site, I have lost the focus on the windows magnifyer only when I use Firefox. It works on IE and every other app that I have.
I have gone into the magnifyer settings and made sure everything is set up right and it is all fine.
Even typing this question the focus seems to be at least 2 lines below where it should be.
Can you help please?
Regards
Robbie

For Chrome, please see this FAQ for reporting issues and a possible workaround to try:
How do I report a bug against Flash Player for Google Chrome?
For IE, we're dealing with a different issue. When troubleshooting problems with Internet Explorer, we recommend you first review the steps outlined in these two FAQs:
Enabling Flash Player in Internet Explorer - http://forums.adobe.com/thread/885448
ActiveX Filtering in Internet Explorer - http://forums.adobe.com/thread/867968

Bluetooth no longer works with iOS 7

Hi everyone, my Bluetooth simply will not work on my iPhone 4 of my iPad 2. It turns on and searches however they don't even discover each other. I have tried to pair it with my car which it des see however I keep getting an error when I try to pair them. I don't even get to the password stage. Any one know a fix for this? Thanks

There are some other discussions on loss of lock screen and control center music controls.
https://discussions.apple.com/message/23063432#23063432
https://discussions.apple.com/message/23042786#23042786
https://discussions.apple.com/message/23071045#23071045
I believe it is the same issue, which would indicate that it is an issue with the phone, nothing to do with the car/stereo/speakers/etc.
When I lose Bluetooth control I also lose lock screen (and control center) controls. Other controls work, but no play, pause, skip forward/back, and of course no song resume on reconnection. A hard phone reset or power cycle fixes it every time, I never have to mess with the car. However, the issue re-occurs about every 2-4 days and I have to reset the phone again to get control back. Does everyone else lose lock screen control at the same time as BT?
It may be a hardware issue. I have a 4S. What phone models are exibiting the BT issue?

Answering calls from car no longer works with iOS 8 update

Similar Messages

Maybe you are looking for