Answers PDF Export (26000 rows, perhaps 200 pages)

When create an small PDF everything works fine.
When I try to create a very bis PDF I receive the message
in german
Adobe Acrobat:
i: Die Datei ist beschädigt und kann nicht repariert werden
The PDF-Document will be not displayed. How can I get such a big PDF?
Regards,
Stefan Hess

Excel has the limit of accomodating 65k rows,i don't think we can change excel limit. when it comes to OBIEE report you can change the instance config file(OracleBI Data/web/config to accomodate any number of rows as per your convenience.
Thanks

Similar Messages

  • Dynamic Tables in PDF - repeating Header row in all pages

    Hi ,
          I have created a dynamic table in PDF, When I add rows, the table is spanning to next page, and I should get the header row in all pages. But, I am getting the header row only for the 2nd page(In Header row properties, I have choosed the header row to be displayed in all pages). I need the Header row to be displayed in all pages.
        To see the previous thread, Click [here|Dynamic Table -  same data repeating in all rows;.
    Thanks and Regards,
    Prabhakar.

    Hi Prabhakar,
    Try out with following step
    Header Row -> Binding -> Select the check box
    Repeat Row for each Data item (Min Count 1)
    Please let me know if this is working or not.
    Cheers
    Satya

  • Answers PDF Export

    I create answers and all of them work fine.
    But: When I create an PDF the defined Subtotals are not displayed.
    Can somebody show me the to see all Totals und Subtotals?
    Regards;
    Stefan Hess

    Hi Venkat,
    i discovered the following:
    1. I loss Subtotals, but not in any answers report.
    2. I loss subtotals only in reports in which the measures are not on the right border.
    3. When I move theses measures to the right border it works :-)
    4. Reports in which the measures from the beginning on the right border works good.
    Have you ever discovered this?
    Regards,
    Stefan
    P.S: GO URL I will check.

  • SSRS 2008 R2 - Column Headers of a tablix visible while scrolling - Then the column headers not visible on 2nd page onwards for PDF EXPORT. it's vice versa. Hence it is possible to provide both at same time ?

    Hi,
    I am using SSRS 2008 R2.
    I have two TABLIX in a report.  One is TABLIX with row/clumn grouping. 2nd one is flat view.
    Here each tablix is dispaly it's data on single page for each.
    My Requirement on First TABLIX is:
         1. I have to make column headers visible on scrolling down
         2. Export to PDF - column headers must be visible on all the pdf pages  for same tablix data.
    But ... either one is achieved at my end.
    so ... any suggestions please to achieve both at same time.
    thank you in advance.
    best regards,
    venkat.

    Hi G.V.Naidu,
    According to your description, the first tablix is matrix to use display data.
    In SSRS, if we want to fix matrix header visible while scrolling and repeat header columns on each page, we can select the corresponding option to enable this function. Please refer to the steps below:
    1. Right click tablix, and select Tablix Properties.
    2. Select “Keep header visible while scrolling” and “Repeat header rows on each page” to enable these function.
    If we are use table to display data, please refer to the article about Repeat Header / Keep Header Visible in Tables.
    http://blogs.msdn.com/b/robertbruckner/archive/2008/10/13/repeat-header-and-visible-fixed-header-table.aspx
    If there are any misunderstanding, please feel free to let me know.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Huge (14K pages) PDF Export to Excel gives "Save As Failed To Process" Message

    Using version 11.0.7.79, running Windows
    I have a massive (33.7MB, 13,900 page) PDF that I am trying to convert to HTML or Excel. When I try to export the file to either of these formats the export process will run for a number of minutes and then bomb out with the "Save As Failed To Process" message. I figured that the issue was with the file size, so I extracted a much smaller subset (200 pages) without a problem.
    Since it appears that file size is the problem, does anyone have a suggestion on how to approach the exporting of this huge file? What causes this error message? Any way to get around it (maybe online conversion of the file)?
    I could manually break it up into smaller files, but I'm hoping that there is 1) an easy way to segment the larger files into smaller files via a 3rd party solution (if needed) or 2) another way to export the huge PDF in one fell swoop. On point 1, I don't know if there is a solution that will automatically segment larger PDF's into 500 page segments per PDF file.
    For context, I am brand new to Acrobat Pro, so there could be a practical solution that I am not aware of yet. Thanks in advance for any help you can offer!

    Yea, this approach is not going to work. Even when I break these down into 1,000 page, 2MB files I get the same "Save As Failed To Process" error message. What causes this message? Not enough memory? How can I resolve it?
    It just doesn't make sense that I can't export basic data to Excel when the actual excel content for 1,000 pages will probably be less that 2MB once it is in Excel. I saved a sample 10 pages and it was 18KB. 100 sample pages was 123KB. I would expect Acrobat to be able to convert these files when I break them down into 1,000 page increments.
    Are there any settings within Acrobat that I should be looking at adjusting? It just seems ridiculous that it is this hard to get Acrobat to do a very basic export for what seems to be a reasonable sized file.

  • How to create 200 individual pdfs instead of 1 pdf with 200 pages? (Page breaks?)

    Hi,
    Is there a way to create multiple reports using SQL Reporting Services (2008 R2) using one dataset, instead of one long report.
    For example, running a batch of customer statements or bills etc.
    At the moment, our report runs well but creates one pdf with 200 pages, instead of 200 individual pdfs with each page being for a different customer.
    I was thinking there might be a page break setting to create separate outputs but haven't been able to find anything.
    Any advice appreciated
    Thanks!
    Lea

    Hi Lea,
    If we want to export the report to the multiple PDF files based on each page, I suggest you can use data-driven subscription which provides a way to use dynamic subscription data that is retrieved from an external data source at run time. For more detail
    information about data-driven subscription, please refer to the following document:
    http://msdn.microsoft.com/en-us/library/ms159150(v=sql.110).aspx
    Besides, we can also use the SQL Server Reporting Services web services to render reports to specify folders. For more details, please see the similar thread:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ecef8799-a0a5-42dd-97f8-bc269a7daa87/ssrs-multiple-pdf-files-for-a-single-report-agent-commision
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • PDF Export with fixed column widths ignores page break on Analysis item

    Hi experts,
    we use the column width modification to define fixed column width in a analysis item. On the same Web template we want to export the whole template including the analysis item to PDF format. First of all everything worked properly, but the fixed widths have not been applied to the PDF. According to [SAP Support Note 1336188|https://service.sap.com/sap/support/notes/1336188] and additional explainations from [SDN Thread 1558536|Column Width Modification not working in Print Version; we solved the problem.
    Unfortunately another problem arises. Our Analysis item delivers a big number of rows which extent multiple pages. By applying the export fix width parameter all page breaks are ignored, meaning that the analysis item is never shown completely in the PDF. We tried all parameter options of the Export Function without success. It seems that the EXPORT_FIX_WIDTH is just working for analysis items, which fit on one single page by length.
    Any ideas how to solve this?
    FYI, our XHTML code (Version SAP BW 7.0 SP 19):
    <bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_1">
    <bi:DATA_PROVIDER_REF value="DP_1" />
    <bi:MODIFICATION type="CHOICE" value="MOD_SINGLE_MODULE" >
      <bi:MOD_SINGLE_MODULE type="COMPOSITE" index="1" >
      <bi:ACTIVE value="X" />
      <bi:MOD_SELECT type="CHOICE" value="MOD_GENERIC_MODULE" >
      <bi:MOD_GENERIC_MODULE type="COMPOSITE" >
      <bi:MOD_REFERENCE value="com.sap.ip.bi.rig.ColumnWidth" />
      <bi:MOD_PARAMETER_LIST type="ORDEREDLIST" >
        <bi:MOD_PARAMETER type="COMPOSITE" index="1" >
          <bi:MOD_PARAM_NAME value="COLUMN_DEFAULT" />
          <bi:MOD_PARAM_VALUE type="CHOICE" value="INTEGER" >
            <bi:INTEGER value="50" />
          </bi:MOD_PARAM_VALUE>
        </bi:MOD_PARAMETER>
        <bi:MOD_PARAMETER type="COMPOSITE" index="2" >
          <bi:MOD_PARAM_NAME value="EXPORT_FIX_WIDTH" />
          <bi:MOD_PARAM_VALUE type="CHOICE" value="BOOLEAN" >
            <bi:BOOLEAN value="X" />
          </bi:MOD_PARAM_VALUE>
        </bi:MOD_PARAMETER>
      </bi:MOD_PARAMETER_LIST>
      </bi:MOD_GENERIC_MODULE>
      </bi:MOD_SELECT>
      </bi:MOD_SINGLE_MODULE>
    </bi:MODIFICATION>
    </bi:ANALYSIS_ITEM>
    Any help and comments will be appreciated. Thank you!
    Best regards,
    Sebastian

    Thank you!
    Unfortunately I didn't find any work around.
    Thanks,
    Federico

  • Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close

    I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
    When I drop folder with indesign files on top of this script:
    1. opens first page
    2. turns specific layer on
    3. prints using preset
    4. exports using preset
    5. close without saving
    6. next page
    Anyone who can give me solution or idea how this should work is greatly appreciated.
    on open sourceFolders
    repeat with sourceFolder in sourceFolders
    tell application "Finder"
    try
    -- If you would like to include subfolders, you say - every file of entire contents of folder…
    set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
    on error -- work around bug if there is only one file
    set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
    end try
    end tell
    if idFiles is not {} then
    tell application "Adobe InDesign CS4"
    set user interaction level to never interact
    repeat with i from 1 to count of idFiles
    open item i of idFiles
    tell document 1
    try
    set visible of layer "ImagesTag_Layer" to true
    end try
    set myPreset to "letter size" -- name of print style to use
    with timeout of 700 seconds
    print using myPreset without print dialog
    end timeout
    set myPreset1 to "pdf preset name" -- name of pdf export style to use
    set myName to the name -- name includes .indd should remove at some point          
    with timeout of 700 seconds
    export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
    end timeout
    close without saving
    end tell
    end repeat
    set user interaction level to interact with all
    end tell
    end if
    return 10 -- try again in 10 seconds
    end repeat
    end open

    (Disclaimer: me not an AS guy!)
    First thing I noticed is the interaction level is set off. If you comment out this line
    set user interaction level to never interact
    you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
    A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
    set myPreset to "letter size" -- name of print style to use
    set myPreset1 to "pdf preset name" -- name of pdf export style to use 
    Do these actually exist in your CS4, with the same (non)capitalization and spaces?

  • PDF export problem in Pages/Keynote/Preview

    I am having some problems with PDF exports (and "Print as PDF")  from Pages (as well as Keynote and Preview).  Here is my situation:
    I am creating a PDF of a barchart+legend from the program Mathematica.  I suspect the way the exported PDF is formatted is that the chart and legend are two blocks within the PDF.  This PDF opens perfectly in Preview and Adobe Reader, and imports perfectly into Pages and Keynote.  However, when the Pages/Keynote document is exported to PDF or printed to PDF, the resulting file opens fine in Preview but not in either the Mac or Windows version of Adobe Reader (part or all of the image fails to appear with a generic "An error exists on this page, please contact the author of this document to correct this problem" error message).  This also happens with the PDF is exported/printed as PDF from Preview itself - the resulting file opens fine in Preview but not with Acrobat.
    Any suggestions?  While I could reconstruct the barcharts individually in Pages itself, for the sorts of documents I'm working on I could easily have dozens of PDFs to import for a single project, and it's much easier to export the files from Mathematica as the analysis is done than rebuild each one from scratch.

    As far as I know, there is no provision for such settings in these programs.
    Developer documentation for ICC colour management in Firefox 2, Firefox 3 and Firefox 3.5, see below. Firefox 3 has ICC colour management disabled by default. Firefox 3.5 has ICC colour management for images within which there is embedded an ICC source colour space profile. It is possible to set Firefox to colour manage the application windows as well as images with embedded ICC profiles. The developer documentation discusses how to do this in what sounds suspiciously like a command line / terminal tool, and also how to point Firefox 3.5 to the display profile. This in turn sounds suspiciously like Firefox 3.5 is unable to talk to the system level service and ask for the display profile automatically.
    Camino and Opera ... I'll pass. I suspect it's more of the same mess.
    /hh
    Reference:
    https://developer.mozilla.org/En/ICCcolor_correction_inFirefox

  • Export for PDF and items disapear from the page...

    Hello Big Masters,
    please give me a solution to the fact that:
    I lose some items (a text box and a graphic) at the export from Indesign to PDF.
    -The file is 6 pages long. Simple. Some text and small pictures.
    -The missing items are close to the right bottom of the page. It is allways on the same page. In my case on the last page.
    -The missing item is exactly the same like some others. (it is like an object I could put on master page, but I wanted only to COPY/ PASTE IN PLACE)
    -I tried countless solutions, but no one passed successfully. I tried to ungroup/regroup (it is an object made of letters and outlined letters), I tried to outline all of the object, I tried recopy the object, I tried to put the page in a different order (thinking that the bug always came on the last page), I closed down indesign, I tried different PDF quality options, I tried renaming and overwriting, I checked all the layers (they are all printable). NOTHING worked.
    I start worring about the quality of Indesign, that I thought being the perfect software for multipage layouts, but I experienced this bug that wasted me 2 hours. In the researches for solutions I also found out that more problems are ahead in big ePubs or when you bring old big files, with Masterpages, it seems that is a real mess what comes out.
    Do you experience these troubles with Bermuda-effect in Indesign (dissapearing items surprisingly unexpected...)???

    The answer for you is YES.
    But Still didn't get the bug solved.
    The first pic as you see, is from ID before I export to PDF
    and the last image is the crazy pdf file, I am getting.
    If the adobe guys need my file for investigation, I can send it to them somehow.
    But then again, I got a compromise solution by putting the "missing" object on a separate masterpage.

  • Hyperlink failure on last pages of PDF (exported from InDesignCS)

    Per Bill@VT from the Acrobat Forum, I'm posting my Acrobat/InDesign question here as well. I thank you in advance for any possible assistance:
    Hello. I have a 211-page catalog I've created in InDesign CS in which I have created hundreds of Hyperlinks (for Export to a PDF for CD distribution). I exported the file to Adobe PDF using general, automatic, medium compression settings (150 ppi) -- the CD's main purpose is for viewing. All the links work great on every page of the PDF except on the last two pages, 210 and 211 (there is nothing different on these pages than any other). The links on page 211 all jump to page 210; links on 210 go nowhere. Even the links set on the master pages don't work; the URL links on page 211 also go to page 210.
    I wondered about it being a capacity issue in Acrobat 7. The InDesign file is 190MB; the exported PDF file is 42.3MB. If capacity is the issue, any suggestions that might help? In some cases, the names of the Hyperlinks throughout the document are long (parts of sentences); would that be causing a problem?
    Has anyone ever encountered this issue?
    Any assistance is most greatly appreciated.
    Operating System: MS Windows 2000
    InDesign CS
    Acrobat 7 Pro
    Here is Bill@VT's response:
    Bill@VT - 5:31am Jun 5, 08 PST (#1 of 2)
    I think the export feature in InDesign is a feature of that product and not Acrobat. Thus you will need to ask in that forum. There are folks here that may know because they also have InDesign. The long link names and potential problems suggests that you have an option in the export incorrectly selected and you are actually not using links. Acrobat will try to interpret things it sees as links as such (like WORD and other products) but may not get them right if they are strange links. In such a case you have 2 options: 1. Be sure you have the proper feature selected for exporting the links (so they are included) or 2. Fix the links so they satisfy proper URL formatting. For instance, spaces are not standard in links, even if MS products like to use them.

    I think the export feature in InDesign is a feature of that product and not Acrobat. Thus you will need to ask in that forum. There are folks here that may know because they also have InDesign. The long link names and potential problems suggests that you have an option in the export incorrectly selected and you are actually not using links. Acrobat will try to interpret things it sees as links as such (like WORD and other products) but may not get them right if they are strange links. In such a case you have 2 options: 1. Be sure you have the proper feature selected for exporting the links (so they are included) or 2. Fix the links so they satisfy proper URL formatting. For instance, spaces are not standard in links, even if MS products like to use them.

  • PDF Table action block is repeating first row in each page.

    Hi All,
    There is a strange problem in PDF Table action block. I am paasing one xml variable in the pdf table action block. But when it creates the final pdf  - I can see the very first row of the xml is getting repeated as first row of each page along with the header.
    Is there any solution - not to reapeat the first row of the xml in each page ?
    Thanks in advance for your response.
    Soumen

    Hi Michael,
    Installation of PDF Action is done based on this link-
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1109054
    MII Version - 12.0.7 Build(20)
    version 1.4.5. of
    the third-party iText.jar and iTextAsian.jar, from
    http://www.lowagie.com/iText/download.html
    Thanks,
    Soumen

  • Export an image of a PAGE from a pdf (vector)

    i have a set of architectural drawings in pdf format and one of the pages had the logo cut off. i am trying to edit this in a IMAGE FILE format in photoshop (i need to add some border and fix the logo) but this set of drawings is in a five page pdf.
    the drawings will be posted to the web and they are specifically requesting IMAGE FILES.
    is there a way to export ONE PAGE from this five page pdf or to do something other than take a screenshot on my mac? i am assuming that some kind of export to raster image will have a much higher resolution than taking a screenshot.
    TIA

    Sure. For exmaple, in Acrobat 9 you can select: File > Export Image > JPEG|JPEG2000|PNG|TIFF
    In Acrobat 11: File > Save As Other > Image > JPEG|JPEG2000|PNG|TIFF
    When the Save As dialog appears, there is a Settings button that allows you to soecify various options such as resolution, compression, and color settings, depending on what format you want. Since you just want to do a simgle page, you might want to extract that page (Document > Extract Pages [A9] or Tools > pages Extract [A11]) first to a new PDF and then convert to image.

  • When exporting UTF-8 encoded HTML page to PDF, Foreign characters won't display correctly.

    I'm not sure if this is a PDF issue or a PHP issue, I have tried asking this in several forums with no working result, and I hope this is the right place to post this question... if not please let me know of another forum.
    here's my PHP code.
    $test_label = 'の契約';
    $result = html_entity_decode($test_label, ENT_QUOTES, 'UTF-8')
    PDF_show_xy($pdf, $result.": ".$order_date , SECTION_START_X+TEXT_LEFT_PADDING, 750+((SECTION_TITLE_BOX_HEIGHT-5)/2));
    the UTF-8 encryption is correct, because the web browser displays all the characters correctly.
    Problem:
    Problem occurs when I try to export the HTML into PDF.
    All I'm getting in my pdf export is a bunch of gibberish. Is there a PDF add-on/plug-in that I'm suppose to install? or is my encoding function called incorrectly wrong.

    oh, sorry if I was unclear.
    I use PHP's PDF functions to create PDF files that looks like my html page.
    here are the functions
    http://us2.php.net/manual/en/ref.pdf.php
    anyway my question is, if there is a setting or a addon/plug-in/third party program that I have to download for Adobe Reader to display foreign language?
    and if anyone knows PHP, am I using the correct decoding function?
    If I'm on the wrong forum, can anyone direct me to the correct one?
    I can't seem to find any resources on exporting HTML pages with foreign characters to PDF using php.

  • Pdf export in pages (email as pdf) do not keep font style !!!

    I wrote a simple page in Pages with tables and i used Times News Roman police and also used a Bold style for some sentence.
    I was really surprised that the pdf export completely replace font police a no more visible difference between normal and bold style !
    please help ! this is really not usable.
    Thanks

    I just made a very simple one page Pages document (blank) with Times New Roman with both regular and bold text. I emailed the Pages document as a PDF to myself. The Pages document (PDF) displayed the text as both regular and bold Times New.
    Did you view the Pages pdf on the ipad or your decktop computer? Try making another Pages document and see if your still having this problem.

Maybe you are looking for