Ant for the build.xml file

when we give the ant command then what the background task perform?..
how ant start parsing the build.xml file ?

Go to ant.jakarta.org. They have numerous tutorials. Do some research first. If you run into an actual problem, then post what it is.
- Saish

Similar Messages

About the build.xml file in EJB's

Hi,
I want to know where is the DTD for the build.xml file in the EJB examples.
Any help in this matter is highly appreciated.

http://jakarta.apache.org/ant/
"satish" <[email protected]> wrote in message
news:[email protected]..
>
Hi,
I want to know where is the DTD for the build.xml file in the EJBexamples.
>
Any help in this matter is highly appreciated.

Antenna - problem reading in a property value from the build.xml file

Hi
I have declared a property in build.xml file of my project like
<property name="debug" value="true" />I want to read the value of this property in my source code like
//#if debug == "true"
//#endifAbove method doesnt work. I tried using method below but it didnt work as well
//#if ${debug} == "true"
//#endifCan anyone please help me how can i read this value?
Thank you

you can get your key bytes with byte [] keyBytes = mykey.getEncoded();
and then write your byte array in a file.
to get back your key :
SecretKey myKey = new SecretKeySpec(keyBytes,"TripleDES");

Better format for the AppDefinition XML file

Hello,
We are using CVS as our source control and are having some problems with the merge process on a AppDefinition file. Is there a way to achieve a better-readable format (i.e. shorter lines, better element indentation, perhaps even attributes indentation) for that file?
Best regards,
Igor Gorbunov

Steven,
I'd like to propose an enhancement request that JAG perform the formatting as do other XML wizards in JDeveloper. It is important for situations such as ours where we have a single application definition with over 60 groups. The unformatted app definition XML file is over 4700 lines and it takes JDeveloper over 12 minutes and 40 seconds to reformat it. With multiple developers and frequent commits, this is a bit ponderous.
We've found that all files other than the app definition merge gracefully or allow easy resolution of merge conflicts. The recent JHS blog entry about version control helped us validate our approach, by the way.
If JAG were to perform the formatting, it would also be easier to fix nuances in the app definition editor such as when you change a bound item to an unbound item, the attributename property of the item is sometimes retained and we need to edit the XML file to remove it. (oops, sorry, that should probably be a different entry in this forum)
Peter Koletzke

Validating against schema file for the output XML file

Hi,
I am using XSLT for mapping. The output message is generated according to the mappings but it is not validate aganist schema of target . I am using xsd file from external defination section as target. Can any body help me in this regard.
Thanks,
Mallikarjun.M

hi,
if you talk about the schema of a target message type
than validation only works if you use graphical
message mapping
not with: xslt,java, abap
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

How to create a build.xml file ??

Hi there,
I am learning j2ee at the moment. I have been throught the tutorial and got everything working (finally). however, now that I have started writing my own code, I am stuck with writing the build.xml file (as this is not covered in the tutorial, it is just provided). Does anyone know a good link that will give me step by step instructions on how to create my own build.xml file for my application.
thanks

You need to learn ant. Go here:
http://jakarta.apache.org/ant/
I also recommend "Java Development with Ant" by Hatcher and Loughran, just published.

Add an extra line in the output xml file

Dear All
My scenarios is idoc to xml file.For the resultant xml file i have to append a line <?Test Line?> after
<?xml version="1.0" encoding="UTF-8" ?> while passing it to legacy system ?
How generate such a xml file in xi?
Any help would be appreciated
Thanks and regards
uday

Dear All
my requirement is to generate an xml file which looks similar to
<?xml version="1.0" encoding="UTF-8"?>
<?TestLine?>
<test_mt>
<field1>123</field1>
<field2>234</field2>
</test_mt>
how to add <?TestLine?> tag?
Hi shabrasish and rajashekar
i am new to java and xslt mapping can you guide me or give me links which are similar to my requirement how to proceed with this kind of mapping
thanks
uday

Where is the web.xml file in Tomcat 5.5

hi folks,
i made a small appl in Tomcat 5.5 named "Name". I made a WEB-INF folder inside the Name folder (which obv is inside the webapps folder), which inside had the classes and lib folder. After running the application where do i look for the web.xml file controlling my appl?
thanx in advance..

well, the web.xml file must be done for you. Its specific to your project, you wont find in on other folders of tomcat.

Converting build.cmd to Ant build.xml file

Can anyone help me convert the attached build command file (windows) to a
          build.xml file for Ant?
          Thanks,
          Matt
          [build.txt]


Hi Kevin,
You can get lots of help from the following links
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap xi - where to find information.pdf
Following is the link for 'how to guides', A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
you can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn
To understand the architecture of XI, Please go through this link,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
XI is all about configuration of Adapters, to learn more please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.
For help on this scenario go through this blog it is in two parts thus i am providing both links below:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Re: new to netweaver
Re: how use XSLT maping in XI
Re: IDOC - XI - FILE scenario
Regards
Vishnu

Help -- Who has experience with ant and build.xml files ?

Hi,
I think my build.xml file is missing setting a classpath I need, but I have never played around with a build.xml file. Could someone help ?
Thank you.
Grazia

A lot of people here use ant. But not all of us can read your mind, and those of us that can are sadistic bastards that like to force people to provide details of their problems just for the hell of it.
So please do the following:
* Go through an ant tutorial or other introductory docs, doing an example or two if present.
* Set up your build.xml according to what you've learned.
* If it still doesn't work, post the relevant portions of it (hopefully you'll have a small, representative sample that reproduces the problem), along with your relevant directory and file structure, the command you're running, and what error messages you're getting.

[svn:bz-3.x] 15191: Minor update to the build. xml and only make files write protected with chmod.

Revision: 15191
Revision: 15191
Author:   [email protected]
Date:     2010-04-01 07:06:21 -0700 (Thu, 01 Apr 2010)
Log Message:
Minor update to the build.xml and only make files write protected with chmod.
Modified Paths:
    blazeds/branches/3.x/modules/sdk/build.xml

DyNamic I agree that is sounds like you may be facing a network configuration issue. Please let your network people know that you need access to the following servers and ports to download Adobe applications through the Adobe Application Manager:
ccmdls.adobe.com:443
ims-na1.adobelogin.com:443
na1r.services.adobe.com:443
prod-rel-ffc-ccm.oobesaas.adobe.com:443
lm.licenses.adobe.com:443
In addition for updates to download properly you will also need access to the following servers:
http://www.adobe.com/:80
htttp:///swupmf.adobe.com/:80
http://swupdl.adobe.com/:80
http://crl.adobe.com/:80

Possible elements in the instanceconfig.xml file for presentation services

g'day
Has anyone here come across a list of all the possible elements that can be put in the configuration file for a presentation service, instanceconfig.xml ?
I have found next to nothing in the documentations, about what can be configured there.
What I am specifically after is: How can I change the default listening port for the Presentation Service? The default port is 9710 and I want to move to another port.
Also, how can I move the JavaHost from the default port 9810? I can change the file OracleBI/web/javahost/config/config.xml to reflect the change. Once the JavaHost has been restarted it starts up on the expected port, but the Presentation Service still tries to communicate over RPC to port 9810. How do I configure the presentation service to search for the JavaHost on a non-default port?
I have boiled it down to my original question: What are the possible values I can configure in the instanceconfig.xml file?
Any comments here would be great.
Cheers, 
Borkur

So, I had a little breakthrough here.
I found in the OBIEE deployment guide, page 142:
To change the Presentation Services listener port
1 Open the instanceconfig.xml file for editing.
2 Locate the <WebConfig> element.
3 Within the <WebConfig> tags, create the element <RPC> and assign it the RPC Listener Port
value for the BI Presentation Services instance, as shown in the following example.
<WebConfig>
<ServerInstance>
<RPC>
<Listener port="9715" />
</RPC>
</ServerInstance>
</WebConfig>
NOTE: In the preceding example, the RPC Listener port for the BI Presentation Services instance
has been changed to port 9715 from the default of 9710.
4 Save changes to the file.
This almost works. The RPC element has been deprecated, as was reported in the sawserver.out.log:
The configuration entry 'RPC/Listener' is deprecated. Please refer to the admin guide for more information.
What I then did was to just remove the RPC elements and leaving the Listener element straight under there ServerInstance element. This seems to have solved the problem.
I still have to figure out how to let the Presentation Service know that I have moved the JavaHost to antoher port ...
Cheers,
Borkur

Where can I find the config.xml file for my Edge project?

Or is that a nonsensical question?
Basically, I am producing a very simple iPad app using Edge and PhoneGap Build. It's all good to go apart from the orientation - I want to be able to lock it to portrait. On researching, it appears that I need to specify the web build/app as portrait in the config.xml file - so where would I find this?
Thanks!

I am not familiar with the phonegap process but I suspect the file you should be attempting to modify is called manifest.xml.
Example, see someone else's solution posted here. jQuery Mobile lock orientation - Stack Overflow
hth
Darrell

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

Usually that error can be cleared up by renaming the personal config folder. Turn on your OS's hidden files and then go to...
C: > Users > your username > AppData > Roaming > Dreamweaver (version) > your language > configuration
Rename the configuration folder configuration-old and start DW up. That should create an entirely new configuration folder and correct the menu.xml file.

Ant for the build.xml file

Similar Messages

Maybe you are looking for