Antenna AIR-ANT2430V-R only for 1252 series??

Hi,
does any of you know why this antenna model (AIR-ANT2430V-R) can only be used for  1252 series???
what would be the problem if I use it with 1262 LAP  ??
regards,

The antenna was specifically developed for the 1252 APs because at the time the only 802.11n AP cisco offered was the 1252. They now have the 1260 series and the 3500 series APs. The thing to be aware of with antennas is: 1. do they have the right connectors and 2. are the tuned to the right frequency. I agree with Leolaohoo that you can use these antennas on any of the Cisco 802.11n APs.

Similar Messages

  • Enable three antennas or just two , AIR-ANT2430V-R 2.4 gHZ.

    Hi,
    I have configured an antenna AIR-ANT2430V-R 2.4 gHZ for LAP 1262N-A-k9 using WLC-2106.
    The devices that are going to associate are hand helds that just support standard b,g; so I would like
    to know if It would have any advantage if I enable all the antennas (three) taking into account that the device just
    support standard b,g but not n.
    what about if I enable just antenna A(tx,rx), and C (rx).
    regards

    If you are to enable 2 antennas, enable A and B.
    You get advantage of having all antennas if you active the clientlink (a.k.a beamforming) feature. This uses the 2 antennas transmitting simulatenously to give a signal boost to b/g clients.
    Nicolas

  • MarkerText - position and visible for one serie (not for all of them)

    Hello,
    can I position the MarkerText in a graph in this way that is centered horizontally inside the serie?
    I know I can use the element markerTextPlace to place the MarkerText in relation to the marker, but that is not waht I want. With this solution I get the MarkerText only on the bar or around the bar, but what I want is that the MarkerText will be shown on the center of the area (of the serie - horizontally) .
    I also want to make the MarketText visible only for specific series (one serie) but not for all series. Waht I can do is show the Markertext or not but it affects all the MarkerText of all the Series.
    Any help?
    Codruta

    What version of OS X and Mail are you running?

  • External Antenna for N Series 1252

    Hello All,
    Can someone please let me know which externally mounted antenna is the correct part to use with a AIR-AP1252 N-Series, (6dBm gain or more, its to cover a playing field)
    I've been scouring the Cisco web site for days to find a definative answer and am getting confused.
    Ideally it needs to cover both radio bands but if it only does 2.4Ghz, I'll settle for that as my life is ticking away.
    Any idea on the wall mounts too.
    All help appreciated
    Regards Tony

    Keep in mind that you can use any 2.4GHz antenna on the 1252. Some antennas have three cables for convenience, but in reality there are three individual antennas inside the casing. You can attain the same effect by purchasing three of the same kind of antenna and connecting them to the 1252.
    The AIR-ANT2506 is a good outdoor antenna and would be fine for use with clients as long as it's installed close to the ground. Omnidirectional antennas are quite deceptive in how they work - they actually form a donut-type coverage that gets "squashed" as gain is increased. A 5.2dBm isn't too bad, but if you install it too high then the signal will go right over the heads of the users. I guess I mention all that to say that you shouldn't install it on a 20-foot pole on top of a roof. :)
    To take full advantage of 802.11n, you'll need three antennas. Otherwise, one or two would suffice fine if you're in an 802.11g environment.

  • Antenna for 3700 series

    Hi all, 
    I have done a lot of research regarding the best antennas for the warehouse but would like to hear your views on what I have chosen. 
    We are deploying in the warehouse and the ceiling is 10m high. We will be installing the 3700e and am eyeing the low profile omnidirectional antenna AIR-ANT2535SDW-R. 
    Well, one is because I read this: Choice of antenna as recommended by Cisco for the warehouse is that when configuring coverage for aisles, try to use directional (Patch) antennas on the wall and shoot down the aisles; or use low-gain Omni-directional antennas on the ceiling (such as dipoles) or units with integrated antennas because high gain omni-directional antennas tend to have more nulls.
    And also there was a thread where Scott mentioned that he almost always goes for the omnidirectional. The guy there was deploying in a warehouse that is 12 m high. 
    Yes, I know that survey is best option. and no, I do not have an antenna or a 3700 to test. So basically, am looking for ideal figures. If the AP is to be mounted 10 m high, will this antenna handle it or otherwise? If not, what antenna is best?
    Oh yer, also saw this from CCNP guide...
    Antennas should not be too high (20 feet = 6m or higher ), otherwise, the client signal is seen as weak even below the antenna, and there is no clear difference in the client signal when close or far from the AP.
    How confusing! Please assist me. 

    Hey Scott,
    Thank you for taking your time to reply. 
    1) What is the safe distance for the small profile omnis? Like up to 6 m up ?
    2) Read an earlier comment where you mentioned that best to use patches if you have a height of about 50" due to the signal bouncing back. Does that comment refer to only ceiling mounted patches or also wall mounted ones? If it refers to ceiling mounted ones, then doesnt that mean that we should not prefer it in this case?
    3) I am looking for a ceiling mounted option to cover from 12 m high...Due to cost, what would be your second option? The antenna you in the link is good but it basically radiates omni directional, meaning that the signal is also radiated above the ceiling, where I do not need it...
    4) Do you think the 2524 ones would be able to radiate from that high up?

  • HT4060 Hi, I have bought iPad air, and got apple 12w USB Power Adapter with pin flat plug. It is a problem for me. I live in Switzerland and the electric outlet is suitable only for round pin plug.

    Hi, I have bought iPad air, and got apple 12w USB Power Adapter with pin flat plug. It is a problem for me. I live in Switzerland and the electric outlet is suitable only for round pin plug.  I do appreciate for your support.

    Plug adapter
    http://img.diytrade.com/cdimg/975531/17878192/0/1293436146/Universal_socket_to_S witzerland_Plug_adapter.jpg

  • Drilling template for Aironet Antenna (AIR-ANT5160NP-R)

    Hi folks,
    due to a customer project I need a drilling template for the Aironet Antenna AIR-ANT5160NP-R. The customer will construct an specific mounting adapter to mount the antenna on the wall.
    I hope you can help me.
    Kind regards,
    Stefan

    Hello, thanks for the comments.
    On the Ceiling Panel 3 meters above the floor.
    First AP coverage Area:
    The coverages area is a rectangle 9 x 24 meters, with no more than 10 concurent users per area.
    Second AP coverage Area:
    The coverages area is a square 10 x 10 meters, with no more than 10 concurent users per area.
    Best Regards

  • Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

  • HT204291 When am watching live news on air play it shows only for  one minute 30 seconds I need some help?

    When am watching live news on air play it only shows for one minute 30 seconds ,, I need some help?

    First of all, Hunt--thanks for responding!
    "First, where are you playing the MPEG-2, that you see that jitter?"
    On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
    "Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
    Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
    I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
    Thanks,
    Doug

  • My Mac air keeps on loosing wifi and when I want to switch it on! It says wifi hardware not installed.  After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.

    My Mac air keeps on loosing wifi and when I want to switch it on it says "wifi hardware not installed"  After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.  This is really frustrating.

    I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
    ... This is happening almost most of the time keeping my phone down most of the times.

  • Is the Midnight Blue Smart Case ONLY for iPad Air 2 ?

    Hi,
    Is the Apple iPad Air Midnight Blue Smart Case ONLY for iPad Air 2nd generation ?
    There is no mention on the box and as this is a gift I received, the sticker on the back which identify the model + price was removed.
    I wanted to know whether if the midnight blue color was only for iPad Air 2 or existed also for iPad Air 1 ?
    Best regards,
    FXR

    The Midnight Blue is a new color, specifically for the iPad Air 2
    http://store.apple.com/us/product/MGTT2ZM/A/ipad-air-2-smart-case-midnight-blue?
    Compatibility is stated for iPad Air 2 only

  • Hi I live in Sweden and want to buy an iPad air 64g wifi from us because it's much cheaper but I can't put in my address to Sweden it's only for us is it something you can help me with

    Hi I live in Sweden and want to buy an iPad air 64g wifi from us because it's much cheaper but I can't put in my address to Sweden it's only for us is it something you can help me with

    Apple in the US will not ship from the US to any other country.

  • 1250 w/AIR-ANT2430V-R Which cable is antenna A - B - C or does it matter

    Hello,
    Please help I have read every doc on this AP and this antenna. there are three jacks on the radio labeled a - b and c. There are three cables on the antenna. which cable corresponds to the correct radio antenna label. Or does it not matter. Looking at the radiation patterns on the antenna I tend to think that it makes a difference. Thanks the info.
    Jason

    The main thing to consider would be that the center cable should be connected to the center jack. The others should not matter as they are the outbound antennae and in mimo the center antenna is the critical unit for phase differentiation. The phase shift mechanisim in the unit will take into effect the other 2 antennae and their position.

  • Aironet 1250 and AIR-ANT2430V-R

    Hello,
    I've just installed a Aironet 1250 and AIR-ANT2430V-R antenna.
    I could do with some pointers on configuring the 2.4Ghz radio interface.
    Role: Access Point
    Goal: Blanket office coverage
    Channel width: 20Mhz or 40+ ?
    External Antenna Configuration: Enable
    Gain: ??db
    Currently I'm seeing speeds between 1Mbps and 144Mbps, with sporadic coverage.
    I was expecting £900+ equipment to be better than the £10 D-link POE WAP currently installed! =]
    Thank you in advance
    K

    Do you have the rp-tnc connectors fastened tightly?
    How are you measuring the bitrate?
    Also, have you tried using a tool such as iperf to measure actual throughput and not bitrate?
    If you are running 802.11n rates on the 2.4 spectrum and plan to deploy more APs on the network, you will want to stay away from channel bonding.
    We do not run 802.11n on the 2.4 side, only the 5Ghz side.

  • How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only?

    How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only, which have a different user with a separate Apple ID?

    You have quite muddied up the waters, I'm afraid. Assuming you now have a single GUID partition formatted Mac OS Extended, Journaled, you should try reinstalling Lion:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for

  • Hard drive vibration on the new iPod

    I can feel the hard drive working when I am holding my new iPod (5th generation, 60 gig). Is this normal? Is there a problem with the hard drive?

  • G4 airport problem.

    I have recently been given an old 533 digital audio G4. Running OS9.2 and with 1.25gig in it. I was then given an airport card, which i know works. I've fitted the airport card but cannot get online. Help!! I'm a bit of a novice!! Do i need to upgrad

  • Making Document attachement as manditary

    Dear all, When we create an oppurtunity,we need to upload some documents.Can we make the document upload as manditory? Thanks and regards, Avinash

  • Subtype of IT0008 is used for what?

    Hi Experts, It suddenly came to me such a question: In what situation should we use subtype of IT0008? Cauze in most cases I just use default subtype 0 -- "Basic contract". How about the others like "Increase basic contract"?? If I create 2 records o

  • Camera Raw Default Tone Curve Function / Coordinates

    Hi, I would like to know where I can find the function / coordinates for the Lightroom / ACR default tone curve that is applied to any image. I think it's the red one in that image, or it's very very close: I want to generate a lookup table to match