Antennas for 1260 APs

Hi,
I was wondering what anntenna options do I have for the 1260 APs. Will any Cisco 2.4/5.8 capable antennas fit the bill? Meaning, is it only the AP that provides the "N" ability? Or, are there only certain 2.4/5.8 antennas that go with the 1260s to provide the "N" speeds. Our current antennas are AIR-ANTM4050V-R. Also, How many antennas will I need per 1260 AP for optimum performance?
Thanks, Pat.

Hi Pat,
you'd find all the antennas specially for the 802.11n AP in this document....
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf
Right from the document...
"Although most existing Cisco antennas can be used, Cisco has developed antennas
specifically designed for use with 802.11n access points to optimize performance."
If you plan to use both frequency bands you'll need 6 antennas per AP.
Kind regards,
Ron

Similar Messages

I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. Can someone resolve this problem.

I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.

Contact App Store support. They're the folks who can help with Account issues.
Regards
TD

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

HT4623 i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind. i paid for some aps and they will not open wit

i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind. i paid for some aps and they will not open with my cu

You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

Why must I provide payment details for FREE aps?

Why must I provide payment details for Free Aps?

To prove you are in the country whose app store you are trying
to use. Not all apps are available in all countries, and some
countries have no AppStore. Also some apps have in-app
purchases and information is necessary to make those purchases.
Purchase an iTunes card and redeem it in your account -
that will allow you to download free apps without credit
info. Check to see if available in your country.

I need an antenna for 4150l mifi hotspot

Can anyone recommend a decent antenna for the 4150l jet pack? Please don't recommend the Verizon Wireless Signal booster. I need an antenna which will improve my 4G signal. This is the only broadband option available where I live and the 4G signal is weak.
Thanks,
Mickey

Look into Wilson Antenna's. They have a Cellular Signal Booster. I live in the country and it works great for me. Here is there website address: www.WilsonElectronics.com You can get all the info there. Hope this helps.
kalou1960

Third Party Antenna for Cisco AP

Hi all,
Does anyone have experience using third party antenna for cisco aironet 1532E ? Can wimax sector antenna be supported on cisco aironet 1532E ? This Wimax antenna works in frequency 2.3 GHz - 2.7 GHz and dual polarization. Brand and type of wimax antenna is PCTEL SP2327-15XP90.
Thanks

Yes, WiMAX is the Third Party Antenna, it will not be supported by Cisco 1532E
For further information on WiMAX Antenna :
http://www.wimo.com/wimax-antennas_e.html

Is there an add on antenna for the iphone 4

Is there an add on antenna for the iphone 4? Having trouble with connection from my home.

Pretty sure no iPhone ever had antenne connector

Can I buy an FM antenna for my Zen V

The station I want to come in, is accessible with any radio...but not with my Mp3 player.
Can I buy some sort of antenna for this unit ?

The earphone cord is the FM antenna.
You could try another set of earphones- I've found that I get better reception on fringe stations when I use a set of earphones that have a longer cord.

Antenna for 3700 series

Hi all,
I have done a lot of research regarding the best antennas for the warehouse but would like to hear your views on what I have chosen.
We are deploying in the warehouse and the ceiling is 10m high. We will be installing the 3700e and am eyeing the low profile omnidirectional antenna AIR-ANT2535SDW-R.
Well, one is because I read this: Choice of antenna as recommended by Cisco for the warehouse is that when configuring coverage for aisles, try to use directional (Patch) antennas on the wall and shoot down the aisles; or use low-gain Omni-directional antennas on the ceiling (such as dipoles) or units with integrated antennas because high gain omni-directional antennas tend to have more nulls.
And also there was a thread where Scott mentioned that he almost always goes for the omnidirectional. The guy there was deploying in a warehouse that is 12 m high.
Yes, I know that survey is best option. and no, I do not have an antenna or a 3700 to test. So basically, am looking for ideal figures. If the AP is to be mounted 10 m high, will this antenna handle it or otherwise? If not, what antenna is best?
Oh yer, also saw this from CCNP guide...
Antennas should not be too high (20 feet = 6m or higher ), otherwise, the client signal is seen as weak even below the antenna, and there is no clear difference in the client signal when close or far from the AP.
How confusing! Please assist me.

Hey Scott,
Thank you for taking your time to reply.
1) What is the safe distance for the small profile omnis? Like up to 6 m up ?
2) Read an earlier comment where you mentioned that best to use patches if you have a height of about 50" due to the signal bouncing back. Does that comment refer to only ceiling mounted patches or also wall mounted ones? If it refers to ceiling mounted ones, then doesnt that mean that we should not prefer it in this case?
3) I am looking for a ceiling mounted option to cover from 12 m high...Due to cost, what would be your second option? The antenna you in the link is good but it basically radiates omni directional, meaning that the signal is also radiated above the ceiling, where I do not need it...
4) Do you think the 2524 ones would be able to radiate from that high up?

Bought a Winegard indoor HDTV antenna for streaming over-the-air TV. Will my Apple TV work

FlatWave Mini
FlatWave
I Am considering cutting my cable service and have bought a Winegard indoor HDTV wall mount antenna for streaming over-the air tv? I would appreciate an advice you might give me on this project. Will my Apple TV work with this setup? Thanks so much.

appetv is a media box not a OTA related product in any way
it use the LAN network to play shared media from your computer
and if it has an Internet connection it offer a range of Internet streaming services
read more
http://www.apple.com/appletv/

Wireless Antenna for Mac Pro G5

Hello
Looking for a wireless antenna for a mac pro that i have, any ideas on where you can buy one and how successful they are?
Many thanks
Dan

Hi Dennis3737,
Welcome to the HP Forums.
I see that you are having an issue with connecting the printer to your Mac over wireless. Just so you are aware, the printer is not supported on the operating system you are using, however I have found a post on the HP Forums that will assist you with getting connected.
Please click on the following link that is provided by JERENDS.
I hope this is helpful. If you have any other questions, please feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Is there any antenna for airport express?

I think i´m having problemas with the signal of my airport express and all the readings i made always refer antennas for airport extreme base station.
My question is, if there is any antenna for airport express that don´t needs an extreme base station.
Thanks
Ricardo
Pentium IV Windows XP Pro

Two quick things to check using AirPort Utility on both devices:
On your "main" base station
Open AirPort Utility - click Manual Setup
Click the Wireless tab/label located just below the row of icons
There must be a check mark next to "Allow this network to be extended"
Click Update to save your changes.
If you don't see this option, you likely have an older AirPort Extreme that does not support the "extend" feature. Please clarify on the version that you have
On your AirPort Express
Open AirPort Utility - click Manual Setup
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Name = Same name as your main network
Check mark next to "Allow wireless clients"
Wireless Security = Same setting as your main router
Wireless Password = Same password as your main network
Confirm Password
Click Update to save settings
If you do not see the "Extend a wireless network setting", you may have an older AirPort Express, or if you are sure that you have a newer 802.11n model, try holding down the option key while you click on the selection box to see if the "Extend" setting will appear.
Assuming no major obstructions between the main router and area that needs more wireless coverage, a good starting location for the Express would be a point that is approximately half the distance between the main router and the area that needs more coverage.
As I said, this feature works very well if major obstructions do not come into play.

Do I need an antenna for Power Mac G5 Wifi?

From the last 30 minutes I've spent surfing the interent about this subject I have learned that I need an AirPort Extreme Card.
Do I need the wifi antenna also? I think I read that without it the wifi is pretty weak but my router is just across the hall.
Also, let me know if there ANY other options to get wifi please!

You need an antenna for all G5 towers from 2003 to early 2005 models.
The T shaped antenna is easily found on the web.
2 hacks are listed in my post here:
https://discussions.apple.com/message/18677374#18677374

1310 with integrated antenna for 100M client conneciton

I would like to use as a AP to connect from my laptop which 100M away. Is it possible to use aironet 1310 with integrated antenna for this approach? Any experience?

Yes, You can use the 1310 device and configure it as a AP and connect it to your Wireless laptop. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge is a flexible platform with the capability of access point, bridge, and workgroup bridge functionality.

Antennas for 1260 APs

Similar Messages

Maybe you are looking for