AntiVir Guard responsible for audio drop outs?!

Hi,
after an intensive testing session with my Dell Inspiron 9300, Zyxel Prestige and AE 6.1.1 - 6.3 with WPA I went back to unsecure WEP and AE 6.2.
Everything works again without dropping AE due WPA authorization problems. But I still got audio drop outs.
A half an hour ago I turned off the AntiVir Guard. Since that Airtunes seems to run fine. Interesting.
Probably I will do a WPA session again to figure out if AntiVir was the main reason. But first I let run iTunes a few hours to get sure.
president

Hmmm ... AirTunes runs better now, but I still have some drop outs. Could also be channel related?!
At the end I come to the conclusion: Apple should work on that.
I'll give up and will live with some drop outs till then.
president at screaming level

Similar Messages

  • TURNING OFF ANTIVIR SEEMS TO SOLVE AUDIO DROP OUTS!!!

    To all XP Pro users: try to turn off your AntiVir or a similar 3rd party service and figure out if your audio drop outs are gone.
    In my case it is. VICTORY!!!
    president

    Victory too early. Still some drop outs but very rare. Probably I have another 3rd party service which affects AirPort Express? Don't know, I'll give up and live with this piece of sh*t.
    president at agressive screaming wild level

  • Airtunes audio drop out solution that worked for me! :)

    setup is DSL modem, AEBS main base station (software v5.6), AE (software v6.2), AE is in WDS mode as a remote base station. I am running OSX 10.4.3, and all software (itunes, etc) is updated current as of 6Nov2005.
    using airport admin utility, i set both base stations to "g only" and still had audio drop outs. Then I left both of them on g only and set both of them on channel 5, (was on channel 10 before.) no airtunes drop outs!!
    I have been audio drop-out free for a few days now and am cautiously optimistic- enough to post my solution. hope it works for you, too!

    Thanks Bryan! Glad to hear you found a solution that works for you. Your suggestions are also among the many solutions previously posted in the mother of all discussions on this topic found at:
    Muhannad Al-Khurafi, "Audio Drop while using airtunes", 10:38pm Jul 21, 2004 CDT

  • Audio drops out for a ½ second about every minute

    Hi There,
    I’m wondering if anyone else is experiencing this problem. I have a 3 G with 3.0. When listening to Bluetooth audio through the SYNC system of my Ford Focus, the audio drops out for a ½ second about every minute. It does this persistently.
    Any fixes?

    My 3GS seems to have an occasional dropout using A2DP with my Kenwood head unit, but I don't think it ever happened with my 3G (both running OS 3.0). It seems like some kind of a latency issue between the iphone and the head unit.

  • Audio drops out for a second at the start of the song

    I have an 8gb Black Nano 3g. My first time syncing I added songs, video, and photos.
    The problem I am having is after selecting a song through cover flow the song will start playing and around the 17 second mark in the song the audio drops for a second then it comes back on and continues playing. At first I thought it was the song file, but it was happening to multiple songs. I also verified the tracks on my computer were fine.
    I updated the firmware and Restored the iPod software.
    Since my iPod had all of my media wiped out I added back only music and tested it. It worked perfectly, no more audio drops. I listened to it all day just fine. Last night I added some new video clips and photos. Audio drop out problem has now returned.
    After work I am going to remove the video files and test it again.
    Has anyone else noticed this issue?

    Yes I have the same problem, actually I'm guessing everyone has the same issue but everyone hasn't realized yet. Problem occurs just after the the backlight turns off.
    After many hours of troubleshooting, I realized the cause is syncing photos.
    Tried resetting iPod & and restoring many times, tried different computers (with different new test iTunes/iPhoto libraries), problem occurs with both iLife 2006 & iLife 2008.
    Took back to Apple Ginza store in Tokyo for testing and a different iPod nano 8GB 3G has the same issue. Staff believed it was a firmware issue and filed a report. A few days later 1.0.1 firmware was released but still didn't fix the issue.
    I have yet to file a bug report with Apple myself.
    My screen also seems to be rotated about 1mm.
    Andrew.
    "I have from an early age abjured the use of meat, and the time will come when men will look upon the murder of animals as they now look upon the murder of men."
    -- Leonardo da Vinci

  • Audio drops out for about 2 seconds after about 2 hours

    Hey folks....I've been renting HD movies, and I've noticed a bit of a pattern. Three times now, at some point just after about two hours the audio drops out for about two seconds. It's not exactly the same time - on one movie it was at 2:02:26 and another it was at 2:04:18. It's only two seconds, so it's really of no consequence. Just now it was during the closing credits (the music). Before, it was that scene in Batman where the two ferries are stalled on the river.
    Of course, I would rewind to make sure. I use the optical out.
    Anyone else notice this?

    Do a hard reset. Hold the power and home buttons simultaneously until the Apple logo appears.

  • HELP! Audio Drops Out When Trying to Capture Canon XL2 Footage

    Please help me out here. I'm a freelance camera operator w/ a Canon XL2 and several times now I've gotten calls from the editors saying they're having problems logging my footage, mainly the audio drops out quite a bit, and I'm not talking bout one second for every 2 or 3 minutes. No. It's like every 10 seconds the audio drops in and out.
    What's the deal? Two times the guy was using a Panasonic DVX-100A to capture, another time it was a SONY DSR mini-DV deck. With each incident I had to go over with my XL2 and use it as the capture device, which is a pain.
    The program they're using is FCP HD or 5. But I think even when they just play the tape in their Sony or Pany cameras, the audio may still suck.
    Help me out here, I can't be the only one with this problem.
    Thanks.
    -R

    Well Robert Swanson, I hope my post wasn't taken offensively, it certainly wasn't meant as such. The only Canon camcorder I owned was the GL1. After switching to Sony's I can honestly say it would take something significant to go back. And, I was merely relating my experiences in trying to capture from other Canon camcorders so that I know where you are coming from. However, I am interested in the HVX being the "noisest" camera on the market. I am seriously considering this camera and would be interested in a review that points this out. I would be using the hard drive recorder instead of P2 cards.
    Mike

  • Audio drop-out in FCPX with 1920x1080 & 2048x1240p @ 24p (codec Apple ProRes 4444 (Linear PCM))24p

    Hi all...
    I'm new to this forum.
    Is there an audio issue (drop-outs) with FCPX (ver 10.1.2) for 1920x1080 24p, 1080p HD & 2048x1240 24p (2k) - note: films in FCPX are in codec Apple ProRes 4444, Linear PCM?
    Very recently I've been working on a show reel and I have imported a file (short film) to snip out a section to add to the show reel. 
    I set the project to the film's settings i.e.. "set based on first video clip"...(1920x1080 24p, 1080p HD).  When I play the film in FCPX the audio "hic-cups"..."dips to silence"..."drops-out" briefly (up to 0.5 secs in duration) and very frequently all the way through (approx 15 mins long film)...note: audio set is at stereo 48kHz. The audio monitors on the right hand side also show the dip taking place (if it's a long enough drop-out).
    I also have a version of the film in 2048x1240 24p at 2k, again Stereo 48kHz...and this does the same audio "drop-out" all the way through.  I'm unsure what other formats will create this problem i.e. higher or lower aspect ratios than those above.
    Is this a software and/or OS issue?  Or a hardware issue?  Or both!?
    About This iMac details:
    iMac 27 inch: OS X ver 10.9.4
    Processor: 3.5 GHz Intel Core i7
    Memory: 32 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GTX 780M 4096 MB
    Fusion Drive 3.12 TB
    Final Cut Pro X was bought & installed with this iMac back in Feb 2014
    FCPX version: 10.1.2
    Note also:  I used Compressor (ver 4.1.2) to convert the files (movies) above to Apple ProRes 422 HQ, Linear PCM and the issue disappeared - the audio and visuals played with no problems.  All films play with no issue when opened in QT player.  They are also fine when exporting from FCPX.  The issue only occurs (as far as I can tell) within FCPX when editing or playing the audio there.
    Has anyone encountered this problem?
    Kind Regards,
    Hakan

    Hi Luis,
    Thank you for that.
    Seems like you have a point about the "hardware" issue.  I'm unsure (new to it all) at what data rate my (er...wonderful) fusion drive provides FCPX for smooth playback - or where I can find that info on the iMac.  Playing back movies in the 422 HQ codec seems to have no issues (when I converted the movie from 4444 HQ). 
    But playing the full 4444 HQ, the picture is smooth, but the audio has these drop-outs - even with "best performance" option ticked. Interesting that the audio suffers, not the picture in FCPX - so not sure what's going on there. I also read - perhaps - that to play a smooth ProRes 4444 HQ movie in FCPX the data rate should be min of 500 Mbs (based upon About Apple ProRes) for HD movies and up (i.e. 2k).  ProRes 422 HQ needs a data rate of 220 Mbs - so that is my upper-limit to smooth video&audio playback with the current system I have, I guess.
    Does anyone recommend a fast USB3 or Thunderbolt drive (500Mbs+) where I am able to run 4444HQ movies with no issues to picture or sound (away from the fusion drive)?
    KR
    H.

  • Audio drops out when following video to external monitor

    When I play a sequence to an external monitor, the audio drops out for 2 to 3 seconds after changes on the video track, and then pops back in with no interuption in video output. It doesn't happen at every cut, but it's consistent in the places it does. I thought it might be caused by the size the project has become. So I exported the sequence as a quicktime file, closed the lage project, opened a new one and exported the new file and played it and it happened again, even though there were no edits. It doesn't occur at all when I turn off external video, and play it on the computer. I connected a new firewire from the computer to my DV deck, restarted the computer, but it keeps happening.
    Is it that the dramatic change in color, light and compostion crowding out the audios ability to follow the video through the wire?
    I'm completely stumped. The next step will be to open the computer and try to blow any excess dust out. I do this periodically anyway, and my last time was two months ago, so I'd be surprised if it works.
    Maybe the G4 with 2G processing power can no longer handle the program, but it shows no sign of stuggle in any other way.
    My clients are starting to grow restless.

    Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
    I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
    Thanks again,
    jesterhead

  • Video & Audio Drop Outs on Macbook Pro

    I have a MacBook Pro with Version 10.7.3, 6 months old. Just recently when I play video, regardless of whether it's in iTunes, iMovie, or embedded in Keynote the video sticks, audio drops out for 1 -2 seconds or the shot freezes. What causes this and how is it fixed.

    I apologize for the audio drop outs. I have sent you a private message to get account information from you so we can reprogram your boxes.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Is itunes 8 fixed (audio drop out)?

    itunes plays fine for a number of tracks and then the audio drops out completely at the beginning of a new song despite the interface appearing to be playing as normal.
    This was the major pain - even though it only took a pause and restart to get the audio back - it happened so frequently. I should point out that this may be related to my airport Express network, but it went silent on both my external speakers and my computer.
    I found a number of posts outlining the same problem but no solutions that worked apart from one great one (sorry, can't find it now) which confirmed it was a problem with itunes 8. True enough, after exhausting every other avenue, i have reverted to itunes 7 and the problem has disappeared.
    The problem is that I have lost many other upgraded features so can anyone advise me as soon as this issue is resolved in a more up-to-date version of itunes so I can upgrade without the problem returning.

    Unfortunately, this is a known problem which Apple seems to be brushing under the carpet. Communication problems using Airtunes has been affecting a lot of users here. Try following the procedure outlines in the sticky of this forum entitled ' Solutions for AirTunes Issues in iTunes 8', and hope for the best. If that doesn't work, I guess you're in the same boat as the rest of us, and will have to wait till Apple sorts out this problem.

  • IDVD '08 Slideshow Audio Drop Out

    Hi
    I've recently upgraded to IDVD '08 & produced a slideshow of 301 pictures with music. I get a moments audio drop out at each 100th picture. I know this to be a problem when the disc is played on a DVD player, but not on a computer. I had hoped that by upgrading to IDVD '08 the problem would have been eliminated. Can anyone advise if there is a way of solving this issue, other than producing separate slideshows of 99 picture & less.
    Any help would be much appreciated.

    The behavior you described above is actually normal for iDvd for anything over 99 images per slideshow. Not much you can do about it short of creating multiple slideshows as you mentioned above. That or making your slideshow as one long QT movie but you may notice a quality loss.
    Or you can try a few other apps like:
    http://www.boinx.com/fotomagico/overview/
    http://www.lqgraphics.com/software/phototomovie.php
    Roxio Toast has a slideshow option as well. You might want to look into this.
    DVDSP might give you slightly better results but then again it's much more money and takes weeks/months to learn as opposed to a few hours / days.

  • Audio Drop Out

    No matter how many minutes of audio or photos (believe me I tried from 2 minutes to 25 minutes of audio and 10-150 photos) that I use in DVD 6, the audio drops out for 3 seconds, always about 1 minute before the finale. Is anyone having the same problem.
    I tried magic slideshow, all combinations and still...audio drops out.
    When I used the 99 photo limit with the fit to audio minutes, nothing like this happened.
    If there is a fix, please let me know.
    Thank You all

    Welcome to discussions, Bob:)
    What is the source of the audio where the drop-out occurs? Purchased iTunes?
    If so, burn the audio to an audio CD and import from that.
    Also, how much free space do you have on the iBook?
    Sue

  • IOS 5.1 audio drop outs - bring back my music!

    I was in the car listening to iTunes via Bluetooth and later via an iPhone dock connector to stereo cable.  On both occasions iTunes also dropped all audio the first time another app made any noise.  For example, I'm listening to music and then my GPS app tells me the next turn, as soon as she finishes talking the music audio drops out. The next time she tells me to turn I hear my music playing in the background, but it drops as soon as she stops speaking again.  If I turn off Bluetooth, then force a connection back to my stereo the music works until another sound happens, even the beep of a new email will cause the audio to be lost.
    As I sit here and type this I could hear the clatter of the keys, until a moment ago when I received an email (and got the email sound), now the keyboard is silent.
    I just got another email (c'mon people, it's 6am on a Saturday!) and the keyboard sounds are now back.
    My wake up alarm just sounded and my keyboard audio is gone again.
    Didn't notice this until the iOS 5.1 update.  It definitely did not occur previously, as I used my iPhone for music driving cross country the week prior to the update.
    Thanks,
    Sean

    Where's the backup of your laptop from before it crashed?
    http://support.apple.com/kb/HT2519

  • Optical audio drops out intermittently

    Hi
    Weird problem has been occurring for the past couple of weeks. Optical audio drops out intermittently, for about 1.5 seconds. Playback isn't affected. Analogue audio is fine. MBP is connected to a Bose V20 sound system.
    Any thoughts?
    -tim

    Bad cable?

Maybe you are looking for

  • Can you upgrade the processor in a Presario CQ62-210us

    I just bought a compaq presario cq62-210us, and I didn't realize that it had a single core celeron 900 processor, so what I was wondering is if it is possible to upgrade to a dual core processor. I know that it is hard to upgrade the processor on lap

  • IPod video not charging & not working

    My iPod was used moderately between November 2006 and June 2007. Always in Belgium with charging and synchronising correctly (always on the same computer). In July, the iPod was taken to the US and was used there + was charged on a local computer. Re

  • IPhone 4 16GB black.

    It's locked on Spain, I'm from Romania. Here is my IMEI : 012961006097330. The guarantee and contract expired some time ago. Can I have it now neverlocked?

  • Kodak printers and Yosemite

    I reported the problem of my Kodak printer not working after updating to Yosemite and have been following the chat, trying out the suggested fixes to no avail. I finally had a call back from Kodak and they are aware of the issue which has affected pe

  • Query tunning steps

    Hi All Please can one provide me steps for query tunning