Antivirus on A6000 not working

After factory reset of Lenovo A6000, in Antivirus settings "Virus database auto update" feature disabled and can't be enabled and ask for premium features for which Rs. 49 for 30 days is demanded. Antivirus shows that the "Virus database expired". When trying to update virus database manually a message appeared that "The Virus database is outdated. Purchase latest license for one time payment of Rs.20". I have accepted this offer and Rs. 20 has been deducted from my Airtel account balance, But again after some days same message showing and virus database isn't updating. Anyone can guide me.
Thanks
R.P.Sharma

Disable Antivirus Service(Two Services)
Download this antivirus from play store
https://play.google.com/store/apps/details?id=com.avast.android.mobilesecurity

Similar Messages

  • My antivirus software dosen't work with firefox, How do I get a previous version?

    After installing the new Firefox update. It says that my antivirus scanner will not work. How do I get my previous version so I can use my program?

    Firefox didn't say that. Firefox only disables Firefox add-ons that aren't compatible with the new version of Firefox. It doesn't do anything with the actual AV program.
    Check with your AV vendor for an update for Firefox 6 compatibility.

  • Antivirus program not working

    Hey there....yesterday my laptop started giving alerts stating my computer was at risk of hackers and malice spyware. Long story short, after frenzy mode, I contacted Webroot and after quite a few tries, they were able to get into
    my computer and do a scan. They came back telling me that my registry cleaner had 57,000 errors on it and that it had to be cleaned immediately, as well as troubleshooted for spyware and antivirus problems as their program was not working, even though every
    scan I did said all was ok. She stated that scss.exe was a terrible malice spyware that was making my cpu work at 100%. She also stated Citrix was malice adware, which I knoe for a fact it is not. I did not give them 299.99 to clean it up. I
    instead trobleshooted a few things. I now have my cpu running at a low 0-4% and up as high as 70% for a moment or two. In order for her to be able to take control of the computer, we had to go as far as doing a system restore after many failed attempts
    were made. Internet explorer as well as folders and files were not accessible for awhile. How serious is all of this and do I have a good choice with Webroot? 

    Since you have not provided specific details as yet, such as the edition of Windows, the specific alerts and where they stemmed from, the installed security software, etc., strongly
    suggest that you create a bootable rescue CD to clean the system with -
    Kaspersky Rescue Disk 10
    How to create a BitDefender Rescue CD
    MowGreen
    Windows Expert IT Pro - Consumer Security
    *-343-* FDNY
    NEVER FORGOTTEN

  • MCPR.exe is not working, how can I delete McAfee Antivirus?

    Hello - I am lost. I need to delete the McAfee Software completely. I need to install a different antivirus for business reasons. I removed the software in the programm list. But the new Antivirus was not working probably. So I deinstalled the new antivirus and I downloaded MCPR.exe but if I try to install as Admin nothing happens. What can I do? Many thanks for help!! 

    Download AppRemover then run it, it will uninstall any security app on your PC completely and get rid of all its registry entries to avoid future conflicts when installing a new Antivirus
    Additionally, if you had already uninstalled the previous security solution, it has an option to simply clean out any left overs
    This is a must have app I say! It saves you from formatting your computer just to install a new antivirus without any conflicts
    ASUS G750JX-CV050H | i7-4700HQ @ 2.40 GHz. | 32 GB DDR3 1600 MHz. Hynix RAM | 256 GB LiteOn LCM-256M3S SSD + 1 TB Seagate Momentus ST1000LM024 5400 RPM HDD | GeForce GTX 770M 3 GB GDDR5 RAM | 17.3" Full HD 3D Glossy Screen

  • SIM 1 slot not working on A6000 plus

    Hi, The SIM 1 slot on my Lenovo A6000 plus is not working. I tried changing the sim positions, but somehow it does not show any network for the sim card placed in slot 1. Please advise what needs to be done. I have tried reboot and replacing sim slots for two providers that I use, but does not help. Chetan

    Thanks. When I checked, Firmware is on 150515 version. I am not sure about how factory reset is done? Can you suggest the steps to same as I am a bit skeptical doing it. Chetan

  • A6000 plus wifi not working.

    I bought my 6000 plus a month back but suddenly its wifi and data pack stopped working.Initially data pack too didnt worked but two days later after removing and replacing the sim it worked but wifi is not working.It shows connected but nothing happens.

    I just just the 6+ and was having the same issues. VERY frustrating. Did a network reset and that didn't work unlike other suggestions. Finally reset my home router to WPA2 (AES) from WEP and so far so good. I had no idea what all that meant when I read this information on another thread, but I googled it on Wikihow and had to share that it is working for me. Good luck!

  • HP LASERJET M1136 MULTIFUNCTION PRINTER-----SCANNER NOT WORKING

    I HAVE RECENLTY PURCHASED HP LASERJET 1136 MFP. PRINTER IS WORKING FINE, BUT SCANNER IS NOT WORKING. HOWEVER PHOTOCOYING ACTION IS PERFECT. I GUESS THERE IS SOME ISSUE WITH THE DRIVER THING. CAN ANYONE PLEASE ASSIST ME FOR THIS???
    I HAVE PREVIOUSLY OWNED DESKJET SERIES, IN WHICH SCANNING AND PRINTING BOTH WERE WORKING FINE. 
    THANKS IN ADVANCE.

    Hi virendrapawar11, 
    Thank you for providing that information.
    Are you signed is a the Administrator of that computer?
    WIA drivers are part of Windows Operating System.
    Run this Microsoft Fit It Tool to see if it will resolve this issue.
    Diagnose and repair Windows File and Folder Problems automatically.
    I have provided this document, just to make sure these are the same ones you had checked.
    This document is to Check the Windows Image Acquisition (WIA) services.
    Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
    Disregard the title.
    Go to Solution three: Check the Windows Image Acquisition (WIA) services.
    Temporarily turn of the Antivirus Software and try scanning again.
    If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
    Back up the registry first.
    How to back up and restore the registry in Windows.
    Restore Default Startup Type for Windows Image Acquisition (WIA).
    Once the WIA is working properly agian on the computer, most likely you will have to uninstall and reinstall the printer software.
    Please let me know the results.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • IPhone 4 Remote App Not working

    Hello,
    Sorry for posting another 'not working' thread, but having searched the forum I cannot find my answer.
    I am not very technical, but I have iTunes and an iPhone 4.
    I have the remote app and the app has worked perfectly up until recently.
    I have upgraded iTunes to 10 and also my antivirus.
    Now I know alot of these things could be caused by the firewall, but I have allowed iTunes to be let through the firewall and I have switched off the firewall in the past to ensure it was not this.
    When I switch on the computer and open iTunes then go to the remote app it works. It is when the iPhone 'sleeps' that the library wont re connect, OR if i have been using iTunes and then try and start the remote that it will not work.
    Any ideas at all as it is so frustrating. I am not technically minded, so switching router channels etc and proxy settings/DHCP etc dont really make sense to me.
    I have tried rebooting everything including the router, but believe it is something simple as it was working prior to iTunes 10.
    I am running a PC on Vista
    Thanks
    Steve

    no I use both ipad2 iphone4 with remote app and have no issues with ios
    try removing the setup and start over

  • USB mouse does not work

    hi All
    I bought a new HP laptop few days ago,when I installed Win7 pro on it after a few minutes, the usb mouse stopped working. Its light still lights up ,but the cursor does not react. The drivers of the device are installed and working properly. the mouse will
    not work until I click "scan for hardware changes"in Device Management . but when I restart the computer, it happend again . but win7 home edition seems does not have this problem. please help.  thanks  

    Hi,
    I suggest updating the latest BIOS and chipset from HP site, then reinstalling USB controllers to check the result. If any USB hub is used, please bypass it.
    http://blogs.technet.com/b/asiasupp/archive/2010/11/23/error-message-one-of-the-usb-device-attached-to-this-computer-has-malfunctioned-and-windows-does-not-recognise-it.aspx
    Also, please perform
    clean boot, disable your antivirus and firewall
    temporarily to avoid any blocking. If the issue persists in clean boot, test the issue in Safe Mode and Device Clean boot.
    Device Clean Boot
    1. Go to Device Manager
    2. Expand "Sound, video and game controllers".
    3. Right Click on Audio device and choose disable.
    4. Please use the same method to disable other dubious hardware such as: internal modem, and CD-R drive. Please note some devices such as video adapter are not available
    to be disabled.
    5. After that, restart the computer and then test the issue. If it does not occur, you can enable the device one by one to narrow down this issue.
    After you found the device that causing the problem, you can resolve by installing last driver or replacing the device.
    Best Regards,
    Niki
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • After doing a widows update itunes will not work at all

    after doing a widows update itunes will not work at all

    hiya!
    I get the itunes has encounterd a problem and needs to close, sorry for the inconvenience error, no specific error number. I do not have QT installed,
    not having QT installed is what will be causing your itunes error message at the moment. let's try a careful standalone QT 7.1 install.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
    love, b

  • Issue with spamassassin, now mail not working

    Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least .
    There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.conf last night thinking it might be the problem , though no virtual domain exist. This was one of the issue on the default Amavisd config. The other one is adding the symbolic link which I already done.
    Computer froze while adding the parameter "@local_domains_maps = (1)", so I manually turn off the Power Mac, then mail stopped altogether. The mails are filing up but the clients couldn't send or receive since this incidence .
    FF is the maincf. and amavis.conf
    All help are greatly appreciated.
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root#
    _______________________Amavisd.cof_________________________
    use strict;
    # Configuration file for amavisd-new
    # This software is licensed under the GNU General Public License (GPL).
    # See comments at the start of amavisd-new for the whole license text.
    #Sections:
    # Section I - Essential daemon and MTA settings
    # Section II - MTA specific
    # Section III - Logging
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # Section VI - Resource limits
    # Section VII - External programs, virus scanners, SpamAssassin
    # Section VIII - Debugging
    #GENERAL NOTES:
    # This file is a normal Perl code, interpreted by Perl itself.
    # - make sure this file (or directory where it resides) is NOT WRITABLE
    # by mere mortals, otherwise it represents a severe security risk!
    # - for values which are interpreted as booleans, it is recommended
    # to use 1 for true, and 0 or undef or '' for false.
    # THIS IS DIFFERENT FROM OLDER AMAVIS VERSIONS where "no" also meant false,
    # now it means true, like any nonempty string does!
    # - Perl syntax applies. Most notably: strings in "" may include variables
    # (which start with $ or @); to include characters @ and $ in double
    # quoted strings, precede them by a backslash; in single-quoted strings
    # the $ and @ lose their special meaning, so it is usually easier to use
    # single quoted strings. Still, in both cases a backslash need to be doubled
    # - variables with names starting with a '@' are lists, the values assigned
    # to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
    # note the comma-separation and parenthesis. If strings in the list
    # do not contain spaces nor variables, a Perl operator qw() may be used
    # as a shorthand to split its argument on whitespace and produce a list
    # of strings, e.g. qw( one@foo example.com three ); Note that the argument
    # to qw is quoted implicitly and no variable interpretation is done within
    # (no '$' variable evaluations). The #-initiated comments can not be used
    # within the string. In other words, $ and # lose their special meaning
    # withing a qw argument, just like within '...' strings.
    # - all e-mail addresses in this file and as used internally by the daemon
    # are in their raw (rfc2821-unquoted and nonbracketed) form, i.e.
    # Bob "Funny" [email protected], not: "Bob \"Funny\" Dude"@example.com
    # and not <"@example.com>; also: '' and not ''.
    # Section I - Essential daemon and MTA settings
    # $MYHOME serves as a quick default for some other configuration settings.
    # More refined control is available with each individual setting further down.
    # $MYHOME is not used directly by the program. No trailing slash!
    #$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
    # : $mydomain serves as a quick default for some other configuration settings.
    # : More refined control is available with each individual setting further down.
    # : $mydomain is never used directly by the program.
    $mydomain = 'cpplaw.com'; aol.com'; # (no useful default)
    # Set the user and group to which the daemon will change if started as root
    # (otherwise just keep the UID unchanged, and these settings have no effect):
    $daemon_user = 'clamav'; # (no default; customary: vscan or amavis)
    $daemon_group = 'clamav'; # (no default; customary: vscan or amavis)
    # Runtime working directory (cwd), and a place where
    # temporary directories for unpacking mail are created.
    # (no trailing slash, may be a scratch file system)
    $TEMPBASE = $MYHOME; # (must be set if other config vars use is)
    #$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
    # $helpers_home sets environment variable HOME, and is passed as option
    # 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
    # on a normal persistent file system, not a scratch or temporary file system
    #$helpers_home = $MYHOME; # (defaults to $MYHOME)
    #$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
    #$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid")
    #$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock")
    # set environment variables if you want (no defaults):
    $ENV{TMPDIR} = $TEMPBASE; # wise, but usually not necessary
    # MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
    # both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
    # POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
    # (set host and port number as required; host can be specified
    # as IP address or DNS name (A or CNAME, but MX is ignored)
    #$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
    #$notify_method = $forward_method; # where to submit notifications
    # NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
    # uncomment the approprate settings below if using other setups!
    # SENDMAIL MILTER, using amavis-milter.c helper program:
    #$forward_method = undef; # no explicit forwarding, sendmail does it by itself
    # milter; option -odd is needed to avoid deadlocks
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
    # just a thought: can we use use -Am instead of -odd ?
    # SENDMAIL (old non-milter setup, as relay):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
    #$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
    # EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # prefer to collect mail for forwarding as BSMTP files?
    #$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
    #$notify_method = $forward_method;
    # Net::Server pre-forking settings
    # You may want $max_servers to match the width of your MTA pipe
    # feeding amavisd, e.g. with Postfix the 'Max procs' field in the
    # master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
    $max_servers = 2; # number of pre-forked children (default 2)
    $max_requests = 10; # retire a child after that many accepts (default 10)
    $child_timeout=5*60; # abort child if it does not complete each task in n sec
    # (default: 8*60 seconds)
    # Check also the settings of @av_scanners at the end if you want to use
    # virus scanners. If not, you may want to delete the whole long assignment
    # to the variable @av_scanners, which will also remove the virus checking
    # code (e.g. if you only want to do spam scanning).
    # Here is a QUICK WAY to completely DISABLE some sections of code
    # that WE DO NOT WANT (it won't even be compiled-in).
    # For more refined controls leave the following two lines commented out,
    # and see further down what these two lookup lists really mean.
    #@bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
    #@bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
    # Any setting can be changed with a new assignment, so make sure
    # you do not unintentionally override these settings further down!
    # Lookup list of local domains (see README.lookups for syntax details)
    # NOTE:
    # For backwards compatibility the variable names @local_domains (old) and
    # @local_domains_acl (new) are synonyms. For consistency with other lookups
    # the name @local_domains_acl is now preferred. It also makes it more
    # obviously distinct from the new %local_domains hash lookup table.
    # local_domains* lookup tables are used in deciding whether a recipient
    # is local or not, or in other words, if the message is outgoing or not.
    # This affects inserting spam-related headers for local recipients,
    # limiting recipient virus notifications (if enabled) to local recipients,
    # in deciding if address extension may be appended, and in SQL lookups
    # for non-fqdn addresses. Set it up correctly if you need features
    # that rely on this setting (or just leave empty otherwise).
    # With Postfix (2.0) a quick reminder on what local domains normally are:
    # a union of domains spacified in: $mydestination, $virtual_alias_domains,
    # $virtual_mailbox_domains, and $relay_domains.
    @local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # @local_domains_acl = qw(); # default is empty, no recipient treated as local
    # @local_domains_acl = qw( .example.com );
    # @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
    # @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
    # or alternatively(A), using a Perl hash lookup table, which may be assigned
    # directly, or read from a file, one domain per line; comments and empty lines
    # are ignored, a dot before a domain name implies its subdomains:
    #read_hash(\%local_domains, '/var/amavis/local_domains');
    #or alternatively(B), using a list of regular expressions:
    # $local_domains_re = new_RE( qr'[@.]example\.com$'i );
    # see README.lookups for syntax and semantics
    # Section II - MTA specific (defaults should be ok)
    # if $relayhost_is_client is true, IP address in $notify_method and
    # $forward_method is dynamically overridden with SMTP client peer address
    # if available, which makes possible for several hosts to share one daemon
    #$relayhost_is_client = 1; # (defaults to false)
    #$insert_received_line = 1; # behave like MTA: insert 'Received:' header
    # (does not apply to sendmail/milter)
    # (default is true)
    # AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
    # (used with amavis helper clients like amavis-milter.c and amavis.c,
    # NOT needed for Postfix and Exim)
    $unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
    #$unix_socketname = undef; # disable listening on a unix socket
    # (default is undef, i.e. disabled)
    # (usual setting is $MYHOME/amavisd.sock)
    # Do we receive quoted or raw addresses from the helper program?
    # (does not apply to SMTP; defaults to true)
    #$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
    #$gets_addr_in_quoted_form = 0; # Bob "Funny" [email protected]
    # SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
    # (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
    $inet_socket_port = 10024; # accept SMTP on this local TCP port
    # (default is undef, i.e. disabled)
    # multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
    # SMTP SERVER (INPUT) access control
    # - do not allow free access to the amavisd SMTP port !!!
    # when MTA is at the same host, use the following (one or the other or both):
    #$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
    # (default is '127.0.0.1')
    @inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
    # (default is qw( 127.0.0.1 ) )
    # when MTA (one or more) is on a different host, use the following:
    #@inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
    #$inet_socket_bind = undef; # bind to all IP interfaces
    # Example1:
    # @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
    # permit only SMTP access from loopback and rfc1918 private address space
    # Example2:
    # @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
    # 127.0.0.1 10/8 172.16/12 192.168/16 );
    # matches loopback and rfc1918 private address space except host 192.168.1.12
    # and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
    # Example3:
    # @inet_acl = qw( 127/8
    # !172.16.3.0 !172.16.3.127 172.16.3.0/25
    # !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
    # matches loopback and both halves of the 172.16.3/24 C-class,
    # split into two subnets, except all four broadcast addresses
    # for these subnets
    # See README.lookups for details on specifying access control lists.
    # Section III - Logging
    # true (e.g. 1) => syslog; false (e.g. 0) => logging to file
    $DO_SYSLOG = 0; # (defaults to false)
    #$SYSLOG_LEVEL = 'user.info'; # (defaults to 'mail.info')
    # Log file (if not using syslog)
    $LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
    #NOTE: levels are not strictly observed and are somewhat arbitrary
    # 0: startup/exit/failure messages, viruses detected
    # 1: args passed from client, some more interesting messages
    # 2: virus scanner output, timing
    # 3: server, client
    # 4: decompose parts
    # 5: more debug details
    $log_level = 4; # (defaults to 0)
    # Customizeable template for the most interesting log file entry (e.g. with
    # $log_level=0) (take care to properly quote Perl special characters like '\')
    # For a list of available macros see README.customize .
    # only log infected messages (useful with log level 0):
    # $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
    # [? %#V |[? %#F ||, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]#
    # |, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]';
    # log both infected and noninfected messages (default):
    $log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
    <%o> -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Select notifications text encoding when Unicode-aware Perl is converting
    # text from internal character representation to external encoding (charset
    # in MIME terminology)
    # to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
    #$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # to be used in notification body text: its encoding and Content-type.charset
    #$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # Default template texts for notifications may be overruled by directly
    # assigning new text to template variables, or by reading template text
    # from files. A second argument may be specified in a call to read_text(),
    # specifying character encoding layer to be used when reading from the
    # external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
    # Text will be converted to internal character representation by Perl 5.8.0
    # or later; second argument is ignored otherwise. See PerlIO::encoding,
    # Encode::PerlIO and perluniintro man pages.
    # $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
    # $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
    # $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
    # $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
    # $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
    # $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
    # If notification template files are collectively available in some directory,
    # use read_l10n_templates which calls read_text for each known template.
    # read_l10n_templates('/etc/amavis/en_US');
    # Here is an overall picture (sequence of events) of how pieces fit together
    # (only virus controls are shown, spam controls work the same way):
    # bypass_virus_checks set for all recipients? ==> PASS
    # no viruses? ==> PASS
    # log virus if $log_templ is nonempty
    # quarantine if $virus_quarantine_to is nonempty
    # notify admin if $virus_admin (lookup) nonempty
    # notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
    # add address extensions for local recipients (when enabled)
    # send (non-)delivery notifications
    # to sender if DSN needed (BOUNCE) or ($warnvirussender and D_PASS)
    # virus_lovers or final_destiny==D_PASS ==> PASS
    # DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
    # Equivalent flow diagram applies for spam checks.
    # If a virus is detected, spam checking is skipped entirely.
    # The following symbolic constants can be used in *destiny settings:
    # D_PASS mail will pass to recipients, regardless of bad contents;
    # D_DISCARD mail will not be delivered to its recipients, sender will NOT be
    # notified. Effectively we lose mail (but will be quarantined
    # unless disabled). Not a decent thing to do for a mailer.
    # D_BOUNCE mail will not be delivered to its recipients, a non-delivery
    # notification (bounce) will be sent to the sender by amavisd-new;
    # Exception: bounce (DSN) will not be sent if a virus name matches
    # $viruses_that_fake_sender_re, or to messages from mailing lists
    # (Precedence: bulk|list|junk);
    # D_REJECT mail will not be delivered to its recipients, sender should
    # preferably get a reject, e.g. SMTP permanent reject response
    # (e.g. with milter), or non-delivery notification from MTA
    # (e.g. Postfix). If this is not possible (e.g. different recipients
    # have different tolerances to bad mail contents and not using LMTP)
    # amavisd-new sends a bounce by itself (same as D_BOUNCE).
    # Notes:
    # D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
    # for informing the sender about non-delivery, and how informative
    # the notification can be (amavisd-new knows more than MTA);
    # With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
    # notification, colloquially called 'bounce') - depending on MTA;
    # Best suited for sendmail milter, especially for spam.
    # With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
    # reason for mail non-delivery, but unable to reject the original
    # SMTP session). Best suited to reporting viruses, and for Postfix
    # and other dual-MTA setups, which can't reject original client SMTP
    # session, as the mail has already been enqueued.
    $final_virus_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_spam_destiny = D_PASS; # (defaults to D_REJECT)
    $final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
    # Alternatives to consider for spam:
    # - use D_PASS if clients will do filtering based on inserted mail headers;
    # - use D_DISCARD, if kill_level is set safely high;
    # - use D_BOUNCE instead of D_REJECT if not using milter;
    # There are no sensible alternatives to D_BOUNCE for viruses, but consider:
    # - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
    # - use D_REJECT instead of D_BOUNCE if using milter and under heavy
    # virus storm;
    # Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
    # to D_BOUNCE.
    # The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
    # and D_PASS made settings $warnvirussender and $warnspamsender only still
    # useful with D_PASS.
    # The following $warn*sender settings are ONLY used when mail is
    # actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
    # Bounces or rejects produce non-delivery status notification anyway.
    # Notify virus sender?
    #$warnvirussender = 1; # (defaults to false (undef))
    # Notify spam sender?
    #$warnspamsender = 1; # (defaults to false (undef))
    # Notify sender of banned files?
    #$warnbannedsender = 1; # (defaults to false (undef))
    # Notify sender of syntactically invalid header containing non-ASCII characters?
    #$warnbadhsender = 1; # (defaults to false (undef))
    # Notify virus (or banned files) RECIPIENT?
    # (not very useful, but some policies demand it)
    #$warnvirusrecip = 1; # (defaults to false (undef))
    #$warnbannedrecip = 1; # (defaults to false (undef))
    # Notify also non-local virus/banned recipients if $warn*recip is true?
    # (including those not matching local_domains*)
    #$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
    # Treat envelope sender address as unreliable and don't send sender
    # notification / bounces if name(s) of detected virus(es) match the list.
    # Note that virus names are supplied by external virus scanner(s) and are
    # not standardized, so virus names may need to be adjusted.
    # See README.lookups for syntax.
    $viruses_that_fake_sender_re = new_RE(
    qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i );
    # where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
    # - the administrator address may be a simple fixed e-mail address (a scalar),
    # or may depend on the SENDER address (e.g. its domain), in which case
    # a ref to a hash table can be specified (specify lower-cased keys,
    # dot is a catchall, see README.lookups).
    # Empty or undef lookup disables virus admin notifications.
    $virus_admin = '[email protected]';
    # $virus_admin = undef; # do not send virus admin notifications (default)
    # $virus_admin = {'not.example.com' => '', '.' => '[email protected]'};
    # $virus_admin = '[email protected]';
    # equivalent to $virus_admin, but for spam admin notifications:
    #$spam_admin = '[email protected]';# $spam_admin = undef; # do not send spam admin notifications (default)
    # $spam_admin = {'not.example.com' => '', '.' => '[email protected]'};
    #advanced example, using a hash lookup table:
    # - $virus_admin = {
    # '[email protected]' => '[email protected]',
    # '.sub1.example.com' => '[email protected]',
    # '.sub2.example.com' => '', # don't send admin notifications
    # 'a.sub3.example.com' => '[email protected]',
    # '.sub3.example.com' => '[email protected]',
    # '.example.com' => '[email protected]', # catchall for our virus senders
    # '.' => '[email protected]', # catchall for the rest
    # whom notification reports are sent from (ENVELOPE SENDER);
    # may be a null reverse path, or a fully qualified address:
    # (admin and recip sender addresses default to $mailfrom
    # for compatibility, which in turn defaults to undef (empty) )
    # If using strings in double quotes, don't forget to quote @, i.e. \@
    $mailfrom_notify_admin = "virusalert\@$mydomain";
    $mailfrom_notify_recip = "virusalert\@$mydomain";
    $mailfrom_notify_spamadmin = "spam.police\@$mydomain";
    # 'From' HEADER FIELD for sender and admin notifications.
    # This should be a replyable address, see rfc1894. Not to be confused
    # with $mailfrom_notify_sender, which is the envelope address and
    # should be empty (null reverse path) according to rfc2821.
    # $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
    # $hdrfrom_notify_sender = 'amavisd-new <[email protected]>';
    # (defaults to: "amavisd-new <postmaster\@$myhostname>")
    # $hdrfrom_notify_admin = $mailfrom_notify_admin;
    # (defaults to: $mailfrom_notify_admin)
    # $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
    # (defaults to: $mailfrom_notify_spamadmin)
    # whom quarantined messages appear to be sent from (envelope sender)
    $mailfrom_to_quarantine = undef; # original sender if undef, or set explicitly
    # (default is undef)
    # Location to put infected mail into: (applies to 'local:' quarantine method)
    # empty for not quarantining, may be a file (mailbox),
    # or a directory (no trailing slash)
    # (the default value is undef, meaning no quarantine)
    $QUARANTINEDIR = '/var/virusmails';
    #$virus_quarantine_method = "local:virus-%i-%n"; # default
    #$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
    #use the new 'bsmtp:' method as an alternative to the default 'local:'
    #$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
    #$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
    # When using the 'local:' quarantine method (default), the following applies:
    # A finer control of quarantining is available through variable
    # $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
    # or a ref to a hash lookup table, or a regexp lookup table object,
    # which makes possible to set up per-recipient quarantine addresses.
    # The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
    # per-recipient lookup result from the hash table %$virus_quarantine_to)
    # is/are interpreted as follows:
    # VARIANT 1:
    # empty or undef disables quarantine;
    # VARIANT 2:
    # a string NOT containg an '@';
    # amavisd will behave as a local delivery agent (LDA) and will quarantine
    # viruses to local files according to hash %local_delivery_aliases (pseudo
    # aliases map) - see subroutine mail_to_local_mailbox() for details.
    # Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
    # Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
    # * if $QUARANTINEDIR is a directory, each quarantined virus will go
    # to a separate file in the $QUARANTINEDIR directory (traditional
    # amavis style, similar to maildir mailbox format);
    # * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
    # mailbox. All quarantined messages will be appended to this file.
    # Amavisd child process must obtain an exclusive lock on the file during
    # delivery, so this may be less efficient than using individual files
    # or forwarding to MTA, and it may not work across NFS or other non-local
    # file systems (but may be handy for pickup of quarantined files via IMAP
    # for example);
    # VARIANT 3:
    # any email address (must contain '@').
    # The e-mail messages to be quarantined will be handed to MTA
    # for delivery to the specified address. If a recipient address local to MTA
    # is desired, you may leave the domain part empty, e.g. 'infected@', but the
    # '@' character must nevertheless be included to distinguish it from variant 2.
    # This method enables more refined delivery control made available by MTA
    # (e.g. its aliases file, other local delivery agents, dealing with
    # privileges and file locking when delivering to user's mailbox, nonlocal
    # delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
    # will not be handed back to amavisd for checking, as this will cause a loop
    # (hopefully broken at some stage)! If this can be assured, notifications
    # will benefit too from not being unecessarily virus-scanned.
    # By default this is safe to do with Postfix and Exim v4 and dual-sendmail
    # setup, but probably not safe with sendmail milter interface without
    # precaution.
    # (the default value is undef, meaning no quarantine)
    #$virus_quarantine_to = '[email protected]'; # traditional local quarantine
    #$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
    #$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
    #$virus_quarantine_to = '[email protected]'; # similar
    #$virus_quarantine_to = undef; # no quarantine
    #$virus_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^user@example\.com$'i => 'infected@'],
    # [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
    # [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
    # [qr/.*/ => 'virus-quarantine'] );
    # similar for spam
    # (the default value is undef, meaning no quarantine)
    #$spam_quarantine_to = '[email protected]';
    #$spam_quarantine_to = "spam-quarantine\@$mydomain";
    #$spam_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
    # [qr/.*/ => 'spam-quarantine'] );
    # In addition to per-recip quarantine, a by-sender lookup is possible. It is
    # similar to $spam_quarantine_to, but the lookup key is the sender address:
    #$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
    # Add X-Virus-Scanned header field to mail?
    $X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
    # Leave empty to add no header field # (default: undef)
    $X_HEADER_LINE = "by amavisd-new at $mydomain";
    $remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
    #$remove_existing_x_scanned_headers= 1; # remove existing headers
    # (defaults to false)
    $remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
    #$remove_existing_spam_headers = 1; # remove existing spam headers if
    # spam scanning is enabled (default)
    # set $bypass_decode_parts to true if you only do spam scanning, or if you
    # have a good virus scanner that can deal with compression and recursively
    # unpacking archives by itself, and save amavisd the trouble.
    # Disabling decoding also causes banned_files checking to only see
    # MIME names and MIME content types, not the content classification types
    # as provided by the file(1) utility.
    # It is a double-edged sword, make sure you know what you are doing!
    #$bypass_decode_parts = 1; # (defaults to false)
    # don't trust this file type or corresponding unpacker for this file type,
    # keep both the original and the unpacked file
    # (lookup key is what file(1) utility returned):
    $keep_decoded_original_re = new_RE(
    qr'^(ASCII|text|uuencoded|xxencoded|binhex)'i,
    # Checking for banned MIME types and names. If any mail part matches,
    # the whole mail is rejected, much like the way viruses are handled.
    # A list in object $banned_filename_re can be defined to provide a list
    # of Perl regular expressions to be matched against each part's:
    # * Content-Type value (both declared and effective mime-type),
    # including the possible security risk content types
    # message/partial and message/external-body, as specified by rfc2046;
    # * declared (recommended) file names as specified by MIME subfields
    # Content-Disposition.filename and Content-Type.name, both in their
    # raw (encoded) form and in rfc2047-decoded form if applicable;
    # * file content type as guessed by 'file(1)' utility, both the raw result
    # from file(1), as well as short type name, classified into names such as
    # .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe, ..., which is always
    # beginning with a dot - see subroutine determine_file_types().
    # This step is done only if $bypass_decode_parts is not true.
    # * leave $banned_filename_re undefined to disable these checks
    # (giving an empty list to new_RE() will also always return false)
    $banned_filename_re = new_RE(
    qr'\.[a-zA-Z][a-zA-Z0-9]{0,3}\.(vbs|pif|scr|bat|com|exe|dll)$'i, # double extension
    # qr'.\.(exe|vbs|pif|scr|bat|com)$'i, # banned extension - basic
    # qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
    # jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
    # vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
    # qr'^\.(exe|zip|lha|tnef)$'i, # banned file(1) types
    # qr'^application/x-msdownload$'i, # banned MIME types
    # qr'^message/partial$'i, qr'^message/external-body$'i, # rfc2046
    # See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
    # and http://www.cknow.com/vtutor/vtextensions.htm
    # A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
    # as well as any file name which happens to end with .exe. If only matching
    # a file name is desired, but not the short name, a pattern qr'.\.exe$'i
    # or similar may be used, which requires that at least one character preceeds
    # the '.exe', and so it will never match short file types, which always start
    # with a dot.
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
    # (these should be considered policy options, they do not disable checks,
    # see bypas*checks for that!)
    # Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
    # envelope e-mail address (or domain only) to the hash %virus_lovers, or to
    # the access list @virus_lovers_acl - see README.lookups and examples.
    # Make sure the appropriate form (e.g. external/internal) of address
    # is used in case of virtual domains, or when mapping external to internal
    # addresses, etc. - this is MTA-specific.
    # Notifications would still be generated however (see the overall
    # picture above), and infected mail (if passed) gets additional header:
    # X-AMaViS-Alert: INFECTED, message contains virus: ...
    # (header not inserted with milter interface!)
    # NOTE (milter interface only): in case of multiple recipients,
    # it is only possible to drop or accept the message in its entirety - for all
    # recipients. If all of them are virus lovers, we'll accept mail, but if
    # at least one recipient is not a virus lover, we'll discard the message.
    # %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
    # lookup tables:
    # (this is mainly a time-saving option, unlike virus_lovers* !)
    # Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
    # access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
    # are used to skip entirely the decoding, unpacking and virus checking,
    # but only if ALL recipients match the lookup.
    # %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
    # do NOT GUARANTEE the message will NOT be checked for viruses - this may
    # still happen when there is more than one recipient for a message, and
    # not all of them match these lookup tables. To guarantee virus delivery,
    # a recipient must also match %virus_lovers/@virus_lovers_acl lookups
    # (but see milter limitations above),
    # NOTE: it would not be clever to base virus checks on SENDER address,
    # since there are no guarantees that it is genuine. Many viruses
    # and spam messages fake sender address. To achieve selective filtering
    # based on the source of the mail (e.g. IP address, MTA port number, ...),
    # use mechanisms provided by MTA if available.
    # Similar to lookup tables controlling virus checking, there exist
    # spam scanning, banned names/types, and headers_checks control counterparts:
    # %spam_lovers, @spam_lovers_acl, $spam_lovers_re
    # %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
    # %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
    # and:
    # %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
    # %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
    # %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
    # See README.lookups for details about the syntax.
    # The following example disables spam checking altogether,
    # since it matches any recipient e-mail address (any address
    # is a subdomain of the top-level root DNS domain):
    # @bypass_spam_checks_acl = qw( . );
    # @bypass_header_checks_acl = qw( [email protected] );
    # @bad_header_lovers_acl = qw( [email protected] );
    # See README.lookups for further detail, and examples below.
    # $virus_lovers{lc("postmaster\@$mydomain")} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
    # $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
    # $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
    # $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
    #or:
    # @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
    # $bypass_virus_checks{lc('[email protected]')} = 1;
    # @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
    # @virus_lovers_acl = qw( [email protected] );
    # $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
    # $spam_lovers{lc("postmaster\@$mydomain")} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # @spam_lovers_acl = qw( !.example.com );
    # $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
    # don't run spam check for these RECIPIENT domains:
    # @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
    # or the other way around (bypass check for all BUT these):
    # @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
    # a practical application: don't check outgoing mail for spam:
    # @bypass_spam_checks_acl = ( "!.$mydomain", "." );
    # (a downside of which is that such mail will not count as ham in SA bayes db)
    # Where to find SQL server(s) and database to support SQL lookups?
    # A list of triples: (dsn,user,passw). (dsn = data source name)
    # Specify more than one for multiple (backup) SQL servers.
    # See 'man DBI', 'man DBD::mysql', 'DBD::Pg', ... for details.
    # @lookup_sql_dsn =
    # ( ['DBI:mysql:mail:host1', 'some-username1', 'some-password1'],
    # ['DBI:mysql:mail:host2', 'some-username2', 'some-password2'] );
    # ('mail' in the example is the database name, choose what you like)
    # With PostgreSQL the dsn (first element of the triple) may look like:
    # 'DBI:Pg:host=host1;dbname=mail'
    # The SQL select clause to fetch per-recipient policy settings.
    # The %k will be replaced by a comma-separated list of query addresses
    # (e.g. full address, domain only, catchall). Use ORDER, if there
    # is a chance that multiple records will match - the first match wins.
    # If field names are not unique (e.g. 'id'), the later field overwrites the
    # earlier in a hash returned by lookup, which is why we use '*,users.id'.
    # No need to uncomment the following assignment if the default is ok.
    # $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
    # ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
    # ' ORDER BY users.priority DESC';
    # The SQL select clause to check sender in per-recipient whitelist/blacklist
    # The first SELECT argument '?' will be users.id from recipient SQL lookup,
    # the %k will be sender addresses (e.g. full address, domain only, catchall).
    # The default value is:
    # $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
    # ' WHERE (rid=?) AND (sid=mailaddr.id) AND (mailaddr.email IN (%k))'.
    # ' ORDER BY mailaddr.priority DESC';
    # To disable SQL white/black list, set to undef (otherwise comment-out
    # the following statement, leaving it at the default value):
    $sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
    # If you decide to pass viruses (or spam) to certain recipients using the
    # above lookup tables or using $final_virus_destiny=1, you can set
    # the variable $addr_extension_virus ($addr_extension_spam) to some
    # string, and the recipient address will have this string appended
    # as an address extension to the local-part of the address. This extension
    # can be used by final local delivery agent to place such mail in different
    # folders. Leave these two variables undefined or empty strings to prevent
    # appending address extensions. Setting has no effect on recipient which will
    # not be receiving viruses/spam. Recipients who do not match lookup tables
    # local_domains* are not affected.
    # LDAs usually default to stripping away address extension if no special
    # handling is specified, so having this option enabled normally does no harm,
    # provided the $recipients_delimiter matches the setting on the final
    # MTA's LDA.
    # $addr_extension_virus = 'virus'; # (default is undef, same as empty)
    # $addr_extension_spam = 'spam'; # (default is undef, same as empty)
    # $addr_extension_banned = 'banned'; # (default is undef, same as empty)
    # Delimiter between local part of the recipient address and address extension
    # (which can optionally be added, see variables $addr_extension_virus and
    # $addr_extension_spam). E.g. recipient address <[email protected]> gets changed
    # to <[email protected]>.
    # Delimiter should match equivalent (final) MTA delimiter setting.
    # (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
    # Setting it to an empty string or to undef disables this feature
    # regardless of $addr_extension_virus and $addr_extension_spam settings.
    $recipient_delimiter = '+'; # (default is '+')
    # true: replace extension; false: append extension
    # $replace_existing_extension = 1; # (default is false)
    # Affects matching of localpart of e-mail addresses (left of '@')
    # in lookups: true = case sensitive, false = case insensitive
    $localpart_is_case_sensitive = 0; # (default is false)
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
    # WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
    # senders even if the message is recognized as spam. Effectively, for the
    # specified senders, message RECIPIENTS temporarily become 'spam_lovers', with
    # further processing being the same as otherwise specified for spam lovers.
    # It does not turn off inserting spam-related headers, if they are enabled.
    # BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
    # Effectively, for messages from blacklisted senders, spam level
    # is artificially pushed high, and the normal spam processing applies,
    # resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
    # reactions to spam, including possible rejection. If the message nevertheless
    # still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
    # in the 'X-Spam-Status' header field, but the reported spam value and
    # set of tests in this report header field (if available from SpamAssassin,
    # which may have not been called) is not adjusted.
    # A sender may be both white- and blacklisted at the same time,
    # settings are independent. For example, being both white- and blacklisted,
    # message is delivered to recipients, but is tagged as spam.
    # If ALL recipients of the message either white- or blacklist the sender,
    # spam scanning (calling the SpamAssassin) is bypassed, saving on time.
    # The following variables (lookup tables) are available, with the semantics
    # and syntax as specified in README.lookups:
    # %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
    # %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
    # SOME EXAMPLES:
    #ACL:
    # @whitelist_sender_acl = qw( .example.com );
    # @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # NOTE: This is not a reliable way of turning off spam checks for
    # locally-originating mail, as sender address can easily be faked.
    # To reliably avoid spam-scanning outgoing mail,
    # use @bypass_spam_checks_acl .
    #RE:
    # $whitelist_sender_re = new_RE(
    # qr'^postmaster@.*\bexample\.com$'i,
    # qr'^owner-[^@]*@'i, qr'-request@'i,
    # qr'\.example\.com$'i );
    $blacklist_sender_re = new_RE(
    qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
    qr'^(investments|lose_weight_today|market.alert|money2you|MyGreenCard)@'i,
    qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
    qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
    qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
    qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
    #HASH lookup variant:
    # NOTE: Perl operator qw splits its argument string by whitespace
    # and produces a list. This means that addresses can not contain
    # whitespace, and there is no provision for comments within the string.
    # You can use the normal Perl list syntax if you have special requirements,
    # e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
    # addresses from a file.
    # a hash lookup table can be read from a file,
    # one address per line, comments and empty lines are permitted:
    # read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
    # ... or set directly:
    # $whitelist_sender{''} = 1; # don't spam-check MTA bounces
    map { $whitelist_sender{lc($_)}=1 } (qw(
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    returns.groups.yahoo.com
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
    # The same semantics as for global white/blacklisting applies, but this
    # time each recipient (or its domain, or subdomain, ...) can be given
    # an individual lookup table for matching senders. The per-recipient lookups
    # override the global lookups, which serve as a fallback default.
    # Specify a two-level lookup table: the key for the outer table is recipient,
    # and the result should be an inner lookup table (hash or ACL or RE),
    # where the key used will be the sender.
    #$per_recip_blacklist_sender_lookup_tables = {
    # '[email protected]'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
    # '[email protected]'=>[qw( [email protected],org .d2.example,org )],
    #$per_recip_whitelist_sender_lookup_tables = {
    # '[email protected]' => [qw( [email protected] .other.example.org )],
    # '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
    # '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
    # 'abuse@' => { 'postmaster@'=>1,
    # '[email protected]'=>1, '[email protected]'=>1 },
    # Section VI - Resource limits
    # Sanity limit to the number of allowed recipients per SMTP transaction
    # $smtpd_recipient_limit = 1000; # (default is 1000)
    # Resource limitations to protect against mail bombs (e.g. 42.zip)
    # Maximum recursion level for extraction/decoding (0 or undef disables limit)
    $MAXLEVELS = 14; # (default is undef, no limit)
    # Maximum number of extracted files (0 or undef disables the limit)
    $MAXFILES = 1500; # (default is undef, no limit)
    # For the cumulative total of all decoded mail parts we set max storage size
    # to defend against mail bombs. Even though parts may be deleted (replaced
    # by decoded text) during decoding, the size they occupied is _not_ returned
    # to the quota pool.
    # Parameters to storage quota formula for unpacking/decoding/decompressing
    # Formula:
    # quota = max($MIN_EXPANSION_QUOTA,
    # $mail_size*$MIN_EXPANSION_FACTOR,
    # min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
    # In plain words (later condition overrules previous ones):
    # allow MAX_EXPANSION_FACTOR times initial mail size,
    # but not more than MAX_EXPANSION_QUOTA,
    # but not less than MIN_EXPANSION_FACTOR times initial mail size,
    # but never less than MIN_EXPANSION_QUOTA
    $MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
    $MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
    $MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
    $MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
    # Section VII - External programs, virus scanners
    # Specify a path string, which is a colon-separated string of directories
    # (no trailing slashes!) to be assigned to the environment variable PATH
    # and to serve for locating external programs below.
    # NOTE: if $daemon_chroot_dir is nonempty, the directories will be
    # relative to the chroot directory specified;
    $path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
    # Specify one string or a search list of strings (first match wins).
    # The string (or: each string in a list) may be an absolute path,
    # or just a program name, to be located via $path;
    # Empty string or undef (=default) disables the use of that external program.
    # Optionally command arguments may be specified - only the first substring
    # up to the whitespace is used for file searching.
    $file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
    $gzip = 'gzip';
    $bzip2 = 'bzip2';
    $lzop = 'lzop';
    $uncompress = ['uncompress', 'gzip -d', 'zcat'];
    $unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
    $arc = ['nomarch', 'arc'];
    $unarj = ['arj', 'unarj']; # both can extract, same options
    $unrar = ['rar', 'unrar']; # both can extract, same options
    $zoo = 'zoo';
    $lha = 'lha';
    $cpio = 'cpio';
    # SpamAssassin settings
    # $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
    # of the option local_tests_only. See Mail::SpamAssassin man page.
    # If set to 1, no tests that require internet access will be performed.
    $sa_local_tests_only = 1; # (default: false)
    #$sa_auto_whitelist = 1; # turn on AWL (default: false)
    $sa_mail_body_size_limit = 64*1024; # don't waste time on SA if mail is larger
    # (less than 1% of spam is > 64k)
    # default: undef, no limitations
    # default values, can be overridden by more specific lookups, e.g. SQL
    $sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
    $sa_tag2_level_deflt = 3.0; # add 'spam detected' headers at that level
    $sa_kill_level_deflt = 22.0;
    #$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
    # at or above that level: bounce/reject/drop,
    # quarantine, and adding mail address extension
    # The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
    # may also be hashrefs to hash lookup tables, to make static per-recipient
    # settings possible without having to resort to SQL or LDAP lookups.
    # a quick reference:
    # tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
    # tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
    # kill_level controls 'evasive actions' (reject, quarantine, extensions);
    # it only makes sense to maintain the relationship:
    # tag_level <= tag2_level <= kill_level
    # string to prepend to Subject header field when message exceeds tag2 level
    $sa_spam_subject_tag = '*** JUNK MAIL ***'; # (defaults to undef, disables)
    # (only seen when spam is not to be rejected
    # and recipient is in local_domains*)
    $sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
    # Example: modify Subject for all local recipients except [email protected]
    #$sa_spam_modifies_subj = [qw( [email protected] . )];
    # @av_scanners is a list of n-tuples, where fields semantics is:
    # 1. av scanner plain name, to be used in log and reports;
    # 2. scanner program name; this string will be submitted to subroutine
    # find_external_programs(), which will try to find the full program
    # path name; if program is not found, this scanner is disabled.
    # Besides a simple string (full program path name or just the basename
    # to be looked for in PATH), this may be an array ref of alternative
    # program names or full paths - the first match in the list will be used;
    # As a special case for more complex scanners, this field may be
    # a subroutine reference, and the whole n-tuple is passed to it as args.
    # 3. command arguments to be given to the scanner program;
    # a substring {} will be replaced by the directory name to be scanned,
    # i.e. "$tempdir/parts"
    # 4. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating NO VIRUSES found;
    # 5. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating VIRUSES WERE FOUND;
    # Note: the virus match prevails over a 'not found' match, so it is safe
    # even if 4. matches for viruses too;
    # 6. a regexp (to be matched against scanner output), returning a list
    # of virus names found.
    # 7. and 8.: (optional) subroutines to be executed before and after scanner
    # (e.g. to set environment or current directory);
    # see examples for these at KasperskyLab AVP and Sophos sweep.
    # NOTES:
    # - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
    # whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
    # (which can be handy if all you want to do is spam scanning);
    # - the order matters: although _all_ available entries from the list are
    # always tried regardless of their verdict, scanners are run in the order
    # specified: the report from the first one detecting a virus will be used
    # (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
    # - it doesn't hurt to keep an unused command line scanner entry in the list
    # if the program can not be found; the path search is only performed once
    # during the program startup;
    # CORROLARY: to disable a scanner that _does_ exist on your system,
    # comment out its entry or use undef or '' as its program name/path
    # (second parameter). An example where this is almost a must: disable
    # Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
    # (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
    # program happens to have a name matching one of the entries ('sweep'
    # again comes to mind);
    # - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
    # for interfacing (where the second parameter starts with \&).
    # Keeping such entry and not having a corresponding virus scanner daemon
    # causes an unnecessary connection attempt (which eventually times out,
    # but it wastes precious time). For this reason the daemonized entries
    # are commented in the distribution - just remove the '#' where needed.
    @av_scanners = (
    # ### http://www.vanja.com/tools/sophie/
    # ['Sophie',
    # \&ask_daemon, ["{}/\n", '/var/run/sophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
    # ['Sophos SAVI', \&sophos_savi ],
    # ### http://clamav.elektrapro.com/
    # ['Clam Antivirus-clamd',
    # \&ask_daemon, ["CONTSCAN {}\n", '/var/amavis/clamd'],
    # qr/\bOK$/, qr/\bFOUND$/,
    # qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
    # # NOTE: run clamd under the same user as amavisd,
    # # match the socket name in clamav.conf to the socket name in this entry
    # ### http://www.openantivirus.org/
    # ['OpenAntiVirus ScannerDaemon (OAV)',
    # \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
    # qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
    # ### http://www.vanja.com/tools/trophie/
    # ['Trophie',
    # \&ask_daemon, ["{}/\n", '/var/run/trophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.f-prot.com/
    # ['FRISK F-Prot Daemon',
    # \&ask_daemon,
    # ["GET {}/*?-dumb%20-archive HTTP/1.0\r\n\r\n",
    # ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
    # '127.0.0.1:10203','127.0.0.1:10204'] ],
    # qr/(?i)<summary[^>]*>clean<\/summary>/,
    # qr/(?i)<summary[^>]*>infected<\/summary>/,
    # qr/(?i)<name>(.+)<\/name>/ ],
    ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp','kavscanner'],
    "-* -P -B -Y -O- {}", [0,3,8], [2,4], # any use for -A -K ?
    qr/infected: (.+)/,
    sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
    sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
    ['KasperskyLab AVPDaemonClient',
    [ '/opt/AVP/kavdaemon', 'kavdaemon',
    '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
    '/opt/AVP/AvpTeamDream', 'AvpTeamDream',
    '/opt/AVP/avpdc', 'avpdc' ],
    '{}', [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/ ],
    # change the startup-script in /etc/init.d/kavd to:
    # DPARMS="-I0 -Y -* /var/amavis"
    # adjusting /var/amavis above to match your $TEMPBASE.
    # NOTE: cd /opt/AVP/DaemonClients; configure; cd Sample; make
    # cp AvpDaemonClient /opt/AVP/
    ### http://www.hbedv.com/ or http://www.centralcommand.com/
    ['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
    ['antivir','vexira'],
    '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
    qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
    (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
    # NOTE: remove the -z if you only have a demo version
    ### http://www.commandsoftware.com/
    ['Command AntiVirus for Linux', 'csav',
    '-all -archive -packed {}', [50], [51,52,53],
    qr/Infection: (.+)/ ],
    ### http://www.symantec.com/
    ['Symantec CarrierScan via Symantec CommandLineScanner',
    ['cscmdline','savsecls'],
    '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
    qr/Files Infected: 0/, qr/^Infected: /,
    qr/Info:\s+(.+)/ ],
    ### http://drweb.imshop.de/
    ['DrWeb Antivirus for Linux/FreeBSD/Solaris', 'drweb',
    '-al -ar -fm -go -ha -ml -ot -sd -up {}',
    [0], [1], sub {('no-name')} ],
    ### http://www.f-secure.com/products/anti-virus/
    ['F-Secure Antivirus', 'fsav',
    '--dumb --archive {}', [0], [3,8],
    qr/(?:infection|Infected): (.+)/ ],
    ['CAI InoculateIT', 'inocucmd',
    '-sec -nex {}', [0], [100],
    qr/was infected by virus (.+)/ ],
    ['MkS_Vir for Linux (beta)', ['mks32','mks'],
    '-s {}/*', [0], [1,2],
    qr/--[ \t]*(.+)/ ],
    ['MkS_Vir daemon',
    'mksscan', '-s -q {}', [0], [1..7],
    qr/^... (\S+)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32', 'nod32',
    '-all -subdir+ {}', [0], [1,2],
    qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32 - Client/Server Version', 'nod32cli',
    '-a -r -d recurse --heur standard {}', [0], [10,11],
    qr/^\S+\s+infected:\s+(.+)/ ],
    ### http://www.norman.com/products_nvc.shtml
    ['Norman Virus Control v5 / Linux', 'nvccmd',
    '-c -l:0 -s -u {}', [0], [1],
    qr/(?i).* virus in .* -> \'(.+)\'/ ],
    ### http://www.pandasoftware.com/
    ['Panda Antivirus for Linux', ['pavcl','pavc'],
    '-aut -aex -heu -cmp -nor -nso -eng {}',
    qr/Number of files infected\.*: 0(?!\d)/,
    qr/Number of files infected\.*: 0*[1-9]/,
    qr/Found virus :\s*(\S+)/ ],
    # Check your RAV license terms before fiddling with the following two lines!
    # ['GeCAD RAV AntiVirus 8', 'ravav',
    # '--all --archive --mail {}', [1], [2,3,4,

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • Ctrl Alt Del and Task manager not working

    Hi, Ive been having a problem getting task manager to run at all. On a fresh reboot, if I use the ctrl alt del function the according screen will come up like normal, and I will click on task manager. It bring me back to my desktop and nothing pops up.
    Its not running in my task bar or anything. Then if I try to use the ctrl alt del function again, nothing happens. Ive tried running task manager straight from the start menu, but then I get an error saying that the version of that file is not compatible with
    the version of windows I am running, which is 64 bit W7. It just started happening on my system a few days ago and I have changed nothing the past few days. I have tried to do a system restore, but to my idiocy, I did not know I needed to manually create restore
    points. So I can only restore to yesterday which would fix nothing. I have run antivirus and anti spyware programs and they have shown no problems and my hard drive only has a 1% disk fragmentation. Is there a way to uninstall and re download a 64 bit compatible
    version of the windows 7 task manager? Or is there a separate reason why it is not working? Thankyou

    Also try it By Registry Editor :
    Start --> Run --> regedit --> ok
    Then 
    Hive: HKEY_CURRENT_USER 
    Key: Software\Microsoft\Windows\CurrentVersion\Policies\System 
    Name: DisableTaskMgr 
    Type: REG_DWORD
    Value: 0=Disablethis key, that is Don't Disable, Enable TaskManager
    Regards,
    MCP | MCTS | MCITP
    The first fix did not work, I tried doing the second one but there is no system folder in
    Software\Microsoft\Windows\CurrentVersion\Policies\ 
    The only one its showing is an explorer folder.

  • Tbird will not send. unnown error. works in safe mode. turned off firewall and still does not work. works fine on desktop but not laptop

    cannot send on laptop. desktop, with same settings, works fine. getting unknown error on send. please help. here is the setup from the help function.
    thanks,
    tim
    WARNING:
    This contains sensitive information which shouldn't be forwarded or published without permission.
    Application Basics
    Name: Thunderbird
    Version: 31.4.0
    User Agent: Mozilla/5.0 (Windows NT 5.1; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
    Profile Folder: C:\Documents and Settings\Tim\Application Data\Thunderbird\Profiles\dhtmqpol.default
    (Local drive)
    Application Build ID: 20150109111741
    Enabled Plugins: about:plugins
    Build Configuration: about:buildconfig
    Memory Use: about:memory
    Mail and News Accounts
    account1:
    INCOMING: account1, Tim Corey, (imap) imap.gmail.com:993, SSL, passwordCleartext
    OUTGOING: smtp.gmail.com:465, SSL, passwordCleartext, true
    account2:
    INCOMING: account2, Local Folders, (none) Local Folders, plain, passwordCleartext
    Crash Reports
    Extensions
    Important Modified Preferences
    Name: Value
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size_cached_value: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    extensions.lastAppVersion: 31.4.0
    gfx.blacklist.direct2d: 3
    gfx.blacklist.layers.direct3d10: 3
    gfx.blacklist.layers.direct3d10-1: 3
    gfx.blacklist.layers.direct3d9: 3
    gfx.blacklist.layers.opengl: 3
    gfx.blacklist.stagefright: 3
    gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
    gfx.blacklist.webgl.angle: 3
    gfx.blacklist.webgl.msaa: 3
    gfx.blacklist.webgl.opengl: 3
    mail.openMessageBehavior.version: 1
    mailnews.database.global.datastore.id: 7bba5461-432a-473f-a4e4-9a009dfee73
    mailnews.database.global.indexer.enabled: false
    network.cookie.cookieBehavior: 2
    network.cookie.prefsMigrated: true
    places.database.lastMaintenance: 1375374210
    places.history.expiration.transient_current_max_pages: 78086
    plugin.importedState: true
    privacy.donottrackheader.enabled: true
    Graphics
    Adapter Description: Mobile Intel(R) 945 Express Chipset Family
    Vendor ID: 0x8086
    Device ID: 0x27ae
    Adapter RAM: Unknown
    Adapter Drivers: igxprd32
    Driver Version: 6.14.10.4926
    Driver Date: 2-15-2008
    WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    GPU Accelerated Windows: 0. Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    AzureCanvasBackend: skia
    AzureSkiaAccelerated: 0
    AzureFallbackCanvasBackend: cairo
    AzureContentBackend: cairo
    JavaScript
    Incremental GC: 1
    Accessibility
    Activated: 0
    Prevent Accessibility: 0
    Library Versions
    Expected minimum version
    Version in use
    NSPR
    4.10.6
    4.10.6
    NSS
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS Util
    3.16.2.3
    3.16.2.3
    NSS SSL
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS S/MIME
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC

    Thanks for the reply. here is the behavior for all steps:
    1. use oper. system safe mode: it works, I can send email
    2. no oper. sys. safe mode, t'bird safe mode: cannot send mail
    3. no oper. sys safe mode, no t'bird safe mode, all addons disabled: cannot send mail.
    It only works when i use oper. sys. safe mode.
    Addons for t'bird were enabled in this test.
    (Not using T'bird safe mode either in this test.)
    Use BitDefender antivirus, which does not have a setting to turn on/off email scanning. Should I contact BD support? (it seems to point to BD as causing the problem. Interesting that I don't have this problem on 2 other desktops, only the laptop. And in the past, T'bird worked on the laptop. I have tried uninstall and reinstall, but mozilla is SAVING all my account and other info, so I cannot do a clean install. it seems to me that if I could do a clean install, it might work. Any idea how to remove all the data and uninstall?
    thanks,
    tim

  • Connect is not working on Hyper-V Manager on Windows 8.1 ( vmconnect does not work )

    Hi all,
    I have been running Windows 8.1 and in Hyper-V Manager, i can see 2 VM ( 1 Linux-Ubuntu , 1 Win 7 ) for couple of months.
    Few days ago as usual i wanted to connect one of them while they were running but it did not work. I tried actions below already:
    - Checked the event logs and they were saying vmconnect is crashing
    Faulting application name: VmConnect.exe, version: 6.3.9600.16384, time stamp: 0x5215cae5
    Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
    Exception code: 0xe0434352
    Fault offset: 0x0000000000008b9c
    Faulting process id: 0x6c0
    Faulting application start time: 0x01d02e59f75297d7
    Faulting application path: C:\WINDOWS\system32\VmConnect.exe
    Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
    Report Id: 351cf3fd-9a4d-11e4-beaf-7446a0bad879
    Faulting package full name:
    Faulting package-relative application ID:
    =================================
    Application: VmConnect.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ArgumentException
    Stack:
       at Microsoft.Virtualization.Client.Interop.IMsRdpClientNonScriptable3.set_NegotiateSecurityLayer(Boolean)
       at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl.SetSecureModeOn()
       at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl.CreateRdpClient(Boolean)
       at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl..ctor(Microsoft.Virtualization.Client.InteractiveSession.RdpConnectionInfo)
       at Microsoft.Virtualization.Client.InteractiveSession.InteractiveSessionForm..ctor(Microsoft.Virtualization.Client.InteractiveSession.RdpConnectionInfo)
       at Microsoft.Virtualization.Client.InteractiveSession.VmisApplicationContext.TryParseCommandLine(System.String[])
       at Microsoft.Virtualization.Client.InteractiveSession.Program.Main(System.String[])
    =================================
    - Stop antivirus Avira, remove Hyper-V, restart add Hyper-V again, restart
    - reboot, shutdown computer
    - add new VM, delete existing one
    -add/delete/modify virtual swtich and add/delete/modify virtual switch accordingly the connected VM
    - restart Hyper-V Management services from services.msc
    I dont know what is going on... When i open Hyper-V Manager i can start/stop VMs and i can see from preview that they are running.

    Hi all,
    A
    After few months, problem occurred again and i could not install the windows from the scratch over and over again.
    I started searching problem online and eventually i found the FIX.
    Looks like Registry Entries are getting screwed up somehow.
    My "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProvider" was looking exactly as below:
    ", schannel.dll"
    And i made it as below:
    "msapsspc.dll,
    schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
    The solution for the other person in the link ( cannot share link since site does not allow me to ) as a source was only missing "credssp.dll" whereas i was missing everything except "schannel.dll". Strange...
    ============================
    Adding credssp.dll to the list of SecurityProviders in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders
    fixed it for me. 
    My full registry entry now reads "msapsspc.dll,
    schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
    ============================

  • Adobe Flash Player does not work in Internet Explorer 10 on Microsoft Windows 8

    I understand that Google Chrome and IE10 have their own automatic update system, however, any site requiring me to use adobe flash player to view videos does not work no matter what I try. I have:
    Used the desktop version of IE versus that Start version and both provide me with the same message.
    Tried uninstalling and then reinstalling but I receive an error message stating that Flash player is already installed and I know that it is not because I have unistalled it. I received this message: Installer encountered an error: 0x80248000
    I even used Ccleaner to hopefully remove any files that were left behind.
    I have gone to Tools, then compatibility settings, unchecked automatic update list from Microsoft. there are no websites on that list t remove.
    I have double-checked that the flash player add-on is enabled.
    I have also checked security settings and enabled Scripting for Java
    I have also made sure that I disabled ActiveXFiltering.
    Basically, I have tried to use Adobe's websites to figure out the issue at the following link: http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html#main-pars_header _1
            None of the tips fixed my issue.
    I have Windows 8, recently upgraded from Windows 7. I have a 64-bit machine, when I tried, just in case I was wrong, to install 32-bit, I receive an error. I would greatly appreciate any help anyone may provide. Is there a customer service number by any chance for software we have not paid for but instead it comes with our computers? I really need to be able to use discussions and watch Teachertube, youtube, and other videos to complete grad schools assignments.
    Please help me!
    I

    It sounds like you might have additional software on your system that is interfering with Flash Player.  You mentioned that this is happening for both Chrome and Internet Explorer, correct?  I've got a similar system (Win 8 upgraded from 7, 64bit) and I've never had any problems.
    I'd recommend trying to temporarily disable any security, antivirus, firewall software that you have running.  You might also want to try starting in Safe Mode with Networking enabled (http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode) to see if Flash works once all utilities and services have been disabled.
    Finally, do either of these links play video back?
    HTML5     video     
    Non-HTML5 video
    Thanks,
    Chris

Maybe you are looking for