Antivirus to protect mac running osx and windows

I am looking for a all around anti-virus to run on my mac that will protect both osx and windows 7 running through Parallels 8

ClamWin and Microsoft Security Essentials for Windows
ClamXav for OS X, will also scan the virtual machine OS's files too.
ClamWin has found things MSE and ClamXav hasn't, good thing is Clam versions are run as you need it basically.
With your virtual machine Windows, make snapshots and only update those, keep the files and exported bookmarks on a external USB, this way you can keep the machine in a more pristine state.
Stuff can jump on Windows (and OS X too) merly connecting to the Internet when the vm starts up.
So scan, restore to snapshot, update when it's available, scan again and revert again because there is so much stuff NOT being caught.

Similar Messages

New dual core for running osx and windows-need autocad!

considering a new desktop. I own a powerbook g4
Machine Model: PowerBook5,6
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.1f3
and use mostly for Adobe Creative suite and Powercadd 7.
I then own a Dell Inspiron with Windows XP to run Autocad.(which I dislike PC)I would rather use a mac and wonder if the new dual core is something I should consider or is it not worth the pain?

You have to use the crossgrade/update 7.2 for Logic Pro to work on an Intel Mac.
It is now available and people have ordered it but I don't think anyone has received their upgrades as yet.
It has been pointed out both by Apple and in numerous other places that Logic Pro will not run under Rosetta so unless you have 7.2 it aint gonna be working......
If you DO have 7.2 already, then please tell us more.....

I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

Hello Fiona,
Congratulations on your new iPhone! You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected. Use the steps in the following article:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Thank you for using Apple Support Communities.
Best,
Sheila M.

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

Can login to Xmarks on Mac, 10.6.4, no problem, but running parallels and windows XP and Firefox on that, I can't login to Xmarks since it won't accept my password, and I'm asking who to contact to fix this problem with Xmarks?

If the question had been asked before, I would have read the answer. Can you make this support any more useless?
I'm trying to run Firefox on a Mac with Parallels and Windows XP. I can use Firefox, that's fine, what I can't do is sync my bookmarks. They are all synced on both macs, and my old PC, a really slow Dell L110, thus trying to use Parellels. Is there any way to contact someone who can look at why my log in to Xmarks won't work on Parallels? Or if there is a support page somewhere where one can actually get some answers, please let me know. Thanks, Rob Rand

Same issue - however firefox will open but I can not click on only of my tool bar shortcuts - the writing on the google age is greyed out so I can not click on anything. Still no resolution? I have deleted the folders and re-installed - it will open and then locks and it will not work????

TS1362 I have a Mac Pro tower, am running osx and iTunes will not work.. It basically just stopped working after having run faultlessly for...years... I can see all the songs, playlists etc, but the progress bar will not progress..it's 'stuck'. Suggestion

I have a Mac Pro tower am running OSX and iTunes will not work. It has always worked flawlessly. I can see all my iTunes content- my playlists, my songs et cetera, But I cannot play anything. The progress bar is 'stuck'...any suggestions?

Thanks. I have been using iTunes since its inception and have never had a problem...I'm using the latest version. The progress bar is the bar that moves when you're playing a song..it just won't start when I double click on a song,..have tried quitting, rebooting etc but nothing works. Apple are useless-they have told me twice they've tried to call me 'momentarily', but I've been waiting by the phone, and they definitely have not tried to call...

HT4818 I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, it wants me to delete it. If I create it in either Windows or Mac OS X afterwards, I can no longer dual boot.

I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?

I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac.

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

It's a 3rd party app. You really should contact Adobe Support and/or post in the Adobe Forums
Mac OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Partition Table Looks Different Between OSX and Windows 7

Hey all,
I recently replaced the hard drive on my 2007 iMac, going from the 320GB drive to a 1 TB drive. It actually worked! The previous drive was failing in very odd ways, though booting into the Windows side (more on dual boot later) always seemed to work, and S.M.A.R.T. always reported that the physical drive seemed OK.
The previous drive (320 GB) had around 200GB devoted to OSX and 100GB partitioned off for a working Windows 7 installation (custom installed x64 Win7 Ultimate). I had the Windows system image backed up to my NAS, and had a Windows system bootable disc to restore that image.
After replacing the drive (and almost crying that I had actually done it right), I first restored OSX from a Time Machine backup, and let it take the full 1TB of space as Journalled HFS+. Then, I used Disk Utility to shrink OSX down to 500GB, and created a second partition (formatted to NTFS) with the remaining 500GB.
Now, restoring a Windows system image is an odd thing, as it tries to do a lot of partition work as opposed to simply restoring the Windows install to a partition. I tried Macrium Reflect first (made a backup in that, too), and it looked like it was going to let me restore to the second partition. It completed the restore...and the entire hard drive was hosed. Partitions had been moved, renamed, resized, and nothing was bootable. I had to use Recovery from an external USB thumb drive to go back to the single, full-drive install of OSX.
Then I tried again. Made the second NTFS partition and used the basic Windows System Restore disk to restore from the standard system image I had on the NAS. I was not expecting this to work. But it did. Windows started showing up in Startup Manager when "option" was pressed on bootup, and both OSX and Windows booted properly and ran fine. This is where I (finally) get to the supreme oddities:
OSX Disk Utility still reports two 500GB partitions, one for OSX and one for Windows.
In OSX the Windows partition shows as having NO DATA on it. Not sure what would happen if I tried to write a file to it when mounted, but there is no data on it when viewed from OSX (I was always able to see the Windows files when I mounted that partition on the previous drive).
The Windows partition does not show up as a valid bootable system in System Prefs --> Startup Disk (naturally, I suppose, since OSX doesn't think there is anything there).
From the WINDOWS side, Windows still sees the old partition table: 200GB for the "unknown" HFS partition, and then the rest of the space can be devoted to Windows (started as 100GB, but I was ablt to expand it to use the remaining ~750GB!). Windows thinks it can have 750GB of space even though I know its partition is only 500GB in size!
Windows cannot see the OSX HFS partition data using HFSExplorer. It CAN see the HFS partition on the attached backup drive (the drive I use for Time Machine).
GParted (a partition program on a Linux bootabld CD-ROM) shows the same partitions as OSX Disk Utility (2x500GB), and also thinks the Windows NTFS partition is empty (all space reports as "unused").
Did I mention both OSX and Windows work fine???
There are, of course, two other partitions on the drive: the first partition is the 200MB one I always see (EFI/GUID portion?), and then between the HFS and NTFS partitions is the 600MB recovery partition (which also shows at option-pressed boot time). OSX, GParted, and Windows see all four partitions, and in the same order. It is just that Windows sees the wrong sizes, and OSX cannot see any data in the Windows partition.
Surely this is all going to break spectacularly at some point, isn't it? What if I ever did write a file to the Windows side from OSX, or what if OSX starts taking more space than the 200GB Windows thinks is the max for that partition? What if I try to make Windows use more than 500GB because it thinks it has almost 800GB to use? What if I defrag the Windows drive?
I had no idea a partition table could look this goofy and yet still have everything be bootable and workable. Is there something I can do to get everything in sync? Basically, I am assuming I need to get Windows to do some low-level kung fu in Disk Manager in order to properly get everything lined up with the "right" partitions as reported by both GParted and OSX Disk Utility. But how do I do that?
By the way, any ideas that totally nuke the drive and start from scratch are completely fine (if it seems like they are doing something different enough that I'd give it a try). I have good backups of both OSX and Windows and have restored them about a half dozen times already as I dealt with the previous failing hard drive and with trying to get dual-boot working again. Not to mention, this iMac is now my secondary machine to the new Mac Mini I got a couple weeks back when I wasn't sure how much more life I was going to get from this 6+ year old iMac.
Thanks for listening to me ramble about this very odd issue, and a huge THANK YOU in advance to anyone who has ideas to help.
Thanks,
sutekh138

Update:
I am pretty sure the issue is a simple GPT/MBR discrepancy.
I installed rEFIt and used it's partitioning tool (gptsync built in) upon bootup. It was able to show the GPT table and the MBR table, but it thinks the second partition of the drive (the Mac OSX bootable partition) is "extended" in the MBR table and says "will not touch this disk."
However, it does look like an MBR sync should be straightforward, as there four partitions in the GPT table and four in the MBR (and MBR allows a max of four, AFAIK). I just need gptsync to relax some rules. I found a link to a supposedly newer version of gptsync compiled for OSX, so I will try that later.
First, I will try Partition Wizard, a free tool I found for the Windows side. It has a "Repair MBR" option that I would have tried last night if I weren't running a new Windows Image Backup in case all of this goes haywire. *smile* The PW tool also has an option to change the MBR over to GPT entirely. That might work, but then I am not sure Windows 7 will boot (from what I read, x64 Win7 running on EFI-enabled hardware should work, but who knows).
Anyway, I will try the following things, in order, until something works, when I get home tonight:
From Windows, run Partition Wizard and try "Repair MBR".
From OSX, download recent gptsync and try to run it.
From Windows, use Partition Wizard to do a full MBR --> GPT conversion.
Nuke the Windows partition in OSX Disk Utility, expand the HFS partition to take up the whole drive, and then add a Windows-bootable partition via Boot Camp-ish command line commands (diskutil). Because if nothing else works, I have to assume I just created the partitions wrong in the first place such that a Windows restore miraculously works, but the partition weirdness is just a timebomb waiting to happen.
Finally, if none of the above work, I'll just get things back to the way they now work and wait for the timebomb to (possibly never) go off. *smile*
I'll update this thread if I get something figured out, in case anyone else stumbles upon it...
Thanks,
sutekh138

Webcam for OSX and Windows

Hi, I would like to buy a webcam that can work on OSX and Windows XP as I have two computers but only want to buy one webcam. Can anybody recommend a webcam that works on both operating systems?
Thanks.
6400 (7.5), G4 PB (10.3.x), MM (10.4.x), 15GB pod, and then some! Mac OS X (10.3.9)

I recently bought an Ezonics 1Contact Pro which works with both systems.

Can't seem to sync my iphone 4 running ios 7 with itunes 10.6 running on a mac running osx 10.5.8 What can I do to fix this?

can't seem to sync my iphone 4 running ios 7 with itunes 10.6 running on a mac running osx 10.5.8 What can I do to fix this? Is there an itunes update? or How can I return to the previous ios?

To sync an iOS 7 device you need to be running iTunes 11.1.1; iTunes 10.6 is way too old and won't work. You need to install iTunes 11.1.1, but to do that you need to be running at least Mac OS X 10.6.8.
So you need to do the following:
1. Upgrade your Mac to at least OS X 10.6.8 (later preferably, but 10.6.8 at the miniumum).
a. Check first to see if your model Mac can be upgraded, check that it has enough RAM and so forth (2GB at the least, more if possible).
b. If you can't upgrade your Mac, or don't want to, then you will have to buy a new Mac with the latest version of OS X (currently 10.8.5, soon to become 10.9) and iTunes 11.1.1
2. Install iTunes 11.1.1 on your newly upgraded Mac.
3. Sync your iOS 7 iPhone with iTunes.

Mac running slow and fan running at high speed

MacPro1,1, osx 10.7.5, 8gb ram
My mac is running slow and fan running at high speed & very loud. On MRI diagnostic it passes everything except this error "CPU Proximity: Can't Read ". I did low level configuration and still having issue with unit.

See Below.
Mac running slow and fan running at high speed

Data Doubler - Format for both OSX and Windows 7 to read/write?

Hello! I have a Mid-2012 MacBook Pro 13" and I've ordered the OWC Data Doubler with a 1.5TB HDD to put into the optical bay. I have a couple of questions.
1. What format should I use for the HDD to allow both my OSX and Windows 7 sides read and write to it? I have a Bootcamp partition, but if it's possible I'd like for both OSX and W7 to be able to read and write to this drive. That way, when I'm in OSX I can view iTunes and media, but if I'm in W7 I can still have the same access. That way, I don't have to worry about "Oh, I downloaded this on the windows side ... I have to figure out how to get it over to the mac side" (or vice versa). Essentially allowing the 1.5TB HDD to be a "go between" for the two.
2. This is a minor question, but will the eject button do something to the HDD if it gets pressed when the optical drive is out and the HDD/Data Doubler is in? I don't plan on pressing it, but I was wondering if I need to dig into terminal (or somewhere else) to "disable" the button or maybe just reassign it so that instead of ejecting it does some other function?
I have heard of "MacDrives" for Windows, but I haven't used it. If this is a better option (to put the HDD into Mac OS Extended Journaled and use an application to allow W7 to read/write) that's fine.
I am putting in the 1.5TB HDD. The end goal, if possible, is to allow the Windows 7 side to read/write to it. As long as it's not a "hacked together" method, I do not mind what way it's done.
Any thoughts? I appreciate it!

Use Winclone for the Windows partition and CCC for the OSX partition.

I have just installed PSE11 on my Mac, running OSX 10.8.3, but it won't recognise my Cannon EOS600D?

I have just installed PSE11 on my Mac, running OSX 10.8.3, but it won't recognise my Cannon EOS600D?

If you hit the delete key you will be asked to confirm you want to delete the photo(s) from the catalog.
To delete an item right-click (or hold two fingers on the track pad) on the green album icon under the thumbnail and choose remove from album.
You can also select a batch of thumbnails in an album and click on a green icon to remove them all from the album.
If you cant see the green album icons, move the zoom slider slightly to the right to make the thumbnails bigger.
Try again from the Organizer with your 600D. After launching the Organizer app press Cmd+G for the downloader. Connect your camera and try refresh from the top pull down menu or try browsing for your device.
If it is still not working copy your files from the storage card to a folder in Pictures. Then use the menu:
File >> Get Photos & Videos >> From Files & Folders

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.

Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark

Antivirus to protect mac running osx and windows

Similar Messages

Maybe you are looking for