Anwering invitations to attend meetings is not possible. Error says Icloud cannot find the page, whenever I try to aceept a meeting by responding the email notification...Any ideas?.

I am using Icloud and previous mobile me. Now I cannot respond to meeting invitations coming in to my email. I get an error saying (when clicking accept) "Icloud cannot find the page". I have also problems with making meeting invitations in my calender when adding attendees and sending to their email. They never get the invitation. Any ideas?

Simple...
http://www.apple.com/uk/support/mac/app-store/contact/

Similar Messages

  • "Logon Not Possible (Error in License Check)" at DR Site

    Hi,
    I am doing DR ( Disaster Recovery ) Site. I used Tivoli Storage Manager ( TSM ) to take FS Backup & DB Backup.
    On the DR site I restore the same backup successfully and the resultant is I am able to run my SAP server.
    When I try to connect through SAP Logon. it gives me first screen.
    Problem none of the user is permitted to enter except sap*. for other user following message come.
    "Logon Not Possible (Error in License Check)".
    i know how to apply new license but in requesting permanent license the SAPnet is not asking hardware key.
    Best Regards,
    Syed Saifuddin
    Software Architect ( JEE 5 )
    SAP BASIS Administrator

    Hi Syed,
    Please check the SAP Note
    Note 94998 - Requesting license keys and deleting systems.
    Also check the sapms<sid> port.
    Thanks,
    Prabhat

  • Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?

    Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?? Thanks, Jörg

    Hi Jorg ,
    Are you trying to reduce the file size with the "Reduced size PDF" in the save as other option.
    Give it a try if you haven't done it prior.
    Open that PDF>File>Save as Other>Reduced size PDF.
    If possible ,please share the snapshot of the error message with us so that we can have a look in order to assist you further.
    Regards
    Sukrit Dhingra

  • Server0 getting down and logon not possible ( error in license check)

    Hi Guys,
    I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
    dev_w0 log says
    M Wed Sep 01 14:42:14 2010
    M  *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
    M  *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c  1314]
    M  *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
    SAP ECC 6.0 release 700
    DB: MaxDB
    OS: Win2k3 server
    Please help.
    Regards
    Mridul Gupta

    License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
    [Thr 2168] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_25-x64
    [Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID123322550]
    -> node name          : server0
    -> node type          : server
    -> node execute       : no
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_25-x64
    I think the node execute sud be yes, I just wanted to know how I can enable this.
    Regards,
    Mridul Gupta

  • Logon not possible (error in license key)

    dear sir
    I had a temporary license which got expired yesterday. but i received the permanent license today
    and i wanted to install it on the solution manager server, but when i 'am trying to log in ,it throws
    an error at the bottom that " logon not possible (error in license key ) "
    pl given a solution
    thanks
    john

    Logon using SAP* in client 000.
    Probably you need to maintain profile parameter login/no_automatic_user_sapstar = 0 and restart the system before you are able to logon with user SAP*

  • Navigation Not Possible error

    Hi All,
    We are getting navigation not possible error while creating Travel Expenses.
    Recently our system was upgraded from EHP5 to EHP6.
    We have copied standard launchpad and we have assigned that custom launchpad role to the user.
    We have debugged the method NAVIGATE_TO_OBJECT in class CL_FITV_NAVIGATION and came to know that in the code launchpad value "ESS" is hardcoded.
    Please let us know how to proceed further to get our custom Launchpad Parameter into that method?
    Regards,
    Ravi

    Hi,
    Yes this shouldnt be hardcoded, this should be either an application parameter or defined in customizing as it is done in many other standard functionnalities... but for FITV it is not the case...
    I think that you only have 3 options here :
    - Create an OSS message.
    - Modify CL_FITV_NAVIGATION...
    - Just edit ESS/MENU directly using transaction LPD_CUST
    Regards

  • CIF queues - Lock not possible error in application log

    hi,
    Below is the application error log from SLG1
    Looks when R3 is sent CIF queue, could not be processed at APO, due to lock not possible. It looks, the object is already locked.
    This happens only certain hours only. We searched in batch jobs etc across landscape, but no luck.
    We are currently checking, if this could be due to some issues with LiveCache processing.
    Any input would be helpful.
    SLG1 - Application log errror:
    Source system: sapapp80 user: R3CIFRFC transaction: function module: /SAPAPO/CIF_CLAF_INB
    Access block: data from system CLAF updated again
    Lock not possible for charc at FM claf_inb:000000000100020361G21C02244Z
    Object is locked at present
    Thanks,
    RajkS

    Hi Raj,
    Pls check the table CIF_IMOD details in R3 System,if 2 IM running with the same object we use to get these kind of
    locking issue.
    also check the workprocesses details during those time. whether you have enough space to process the reqd the
    t-data.
    Regards
    DPS

  • I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?

    I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?
    This is highly important. I know the number from which the voicemail arrived, but have not been able to figure out how to retrieve it. I accidentally had the voicemail in the Deleted Messages folder, and then Cleared this folder. If there is any possible way I might be able to retrieve this message, even if there is a cost associated with it, please help me.
    Thank you.

    I think you maybe able to restore from backup if that voicemail was included in the backup. http://support.apple.com/kb/HT1766

  • Posting of retirement/transfer not possible (error in the asset)

    Dear All,
    I have been trying to retire 3 assets by ABAVN. After I try to simulate the posting, it says:
    Posting of retirement/transfer not possible (error in the asset)
    Message No.465
    Diagnosis
    An inconsistency was found for the asset 10 during the last recalculate values.
    Posting was rejected,
    Choose the function recalculate values in the master data maintanance transaction, and remove any inconsistencies.
    My question is that what is the asset 10..is it the depreciation area? C's I haven't input 10 assets...only 3.
    What is the recalculate values for asset master data maintanance? Is it the depreciation or other input to the asset master?
    Thank you.
    Emma

    Hi,
    I checked AFAR and found it would re-valuate 2 assets in 1999 and 2000 for depreciation area 10 (which is the tax depreciation). In 1999, the assets are retired partially. I am checking on the values AFAR calculated and find what happened that made it necessary to re-valuate the assets.
    Thank you.
    Emma

  • Posting of retirement/transfer not possible (error in the asset) Mes: AA465

    Dear Experts,
    while doing ABUMN, i am getting the following error
    Posting of retirement/transfer not possible (error in the asset)
    Message no. AA465
    Diagnosis
    An  inconsistency was found for the asset 01  during the last recalculate values.
    System Response
    Posting is rejected.
    Procedure
    Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
    Regards,
    Venkat

    Thanks ravi,
    I run the AFAR but nothing is visible in test run.
    I am defined the cut off key(5%) and assigned in to the dep key.
    we run the depreciation for the last 5 months. some of the assets fully depreciated before lagacy data upload. in AW01N those assets showing the error message. Now that asset(fully depreciated asset) is transfer to another business area. then it showing that:
    Posting is rejected.
    Procedure
    Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
    Run the depreciation in AFAR means. in which period i can run.
    Thanks
    Venkat

  • Sap license error--error is "login not possible (error in license check)u0094

    Hi,
    I we are not able to login in our IDES r/3 system, it is showing “login not possible (error in license check)”, only sap*  is able to login . I have already applied sap license that will
    Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light.  I tried to del old one but system says through sap* not possible, only sys admin will do…..what I can do now..

    Hi,
    When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this  message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
    THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
    So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
    Select the expired license in menu goto EDIT->Delet license(shift+f2)
    kiran kumar.v

  • When i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account?

    when i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account? if i change my ID on the ipad deos it change it on my computer aswel?

    Hi
    I would try this since Apple TV is built to allow multiple Apple Ids
    On you Apple TV
    General > Settings >Itunes Store > Add New Account (put yours in here)
    Then Switch account to your Apple Id
    Cheers

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Itunes will not open; it says it cannot be read because it was created by a newer version.  What do I do

    itunes will not open; it says it cannot read because it was created by a newer version.  HELP!

    Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • While trying to access my local network I get the message..."The page could not be opened because server cannot be found."  This, after updating to Yosemite and paying (again) for the server app.

    while trying to access my local network I get the message..."The page could not be opened because server cannot be found."  This, after updating to Yosemite and paying (again) for the server app.

    It's absolutley scandalous that a company with Apple's resources can let this happen.  They should have staggered the release by region rather than opening the flood gates.  The upgrade itself took me about 10 attempts to download it, and then I thought I was home free.  That was until it rebooted and won't activate.  It's over 2 hours now.
    Scandalous!

Maybe you are looking for