Any 3gs user with ios5 update have trouble with wifi?

After updating to ios5, the wifi reception is weak. I get only a couple pf bars even in the same room as the router. And once I setp out of the room, I get no signal. The GPS cannot lock on my position.

I have the smae problem, my old 2G phone and iTouch both have great signal throughout the house but my 3GS does not. And It was not the case before upgrade to iso5. Also I use my maps a lot and never had any trouble getting lock on signal before ios5 upgrade. Now it will not lock on my position. I use the maps feature exclusively for getting around and checking travel time and traffic. Is there any soultion?

Similar Messages

Yet Another iPod Touch user with WIFI problem

I have Linksys WRT54GS wifi router setup at home. I use four notebooks, one mac mini and one mobile phone (Nokia N80) without any problem on my wifi network.
The only problem is with my brand new iPod Touch 16GB (firmware: 1.1.2 3B48b - no jailbreak). It always shows an error "Unable to join the network 'MY-SSID-NAME'". I have tried to change SSID, change security settings (WPA, WEP, no security, ...) - but nothing helped. All other devices (notebooks, macmini and phone) always worked like a charm.
iPod worked only once - the first time I used it (after buying). Since then it does not. I have tried all resets, Restore in iTunes, ...
I think it might be a bug in firmware. Please help someone.
BTW: How (an where) can I report a bug to Apple ?

Just like many others, I bought Ipod Touch in Christmas and felt frustrated about surfing the net. I have read many posts in the forum. And I have tried many methods suggested by others to try to figure out the problems. Finally I have solved the problem and I want to share some ideas with others.
Steps of Checking:
(1) Check whether you have a wireless network at home or at work. Check whether the network is security protected or not. If it is, better ask the admininistrator (at home, the admin should be the one who bought the wireless router.) for password.
(2) Check the latest firmware upgrade for the wireless router (in my case, I use Linksys WRT54G. After I upgraded the firmware, my ipod touch could get the necessary IP from the router.)
(3) For the wireless router, better broadcast the SSID for the first time so that the IPod Touch can find it easily. I use WPA2-Personal Encryption AES (though many buddies here point out that WEP, WPA or even no security is also okay). I even set the MAC filtering and the Ipod Touch still works fine!(though you need to input the MAC address of your Ipod Touch to the MAC filtering table in the admin page of your router. the MAC address of Ipod Touch can be found in the Ipod Touch general information. There is a string like XX:XX:XX:XX:XX:XX
(4) To mininimize the interference from neighbouring wireless networks, better try the connection near the wireless router.
(5) If you have tried for several times and failed to connect, you may reset the router by powering off for 15 seconds and reset the network configuration of the Ipod.
I have used Compag IPAQ before and I must say that for those tiny toys with Wifi capability, the connection is not that stable. However, I find that using the Ipod Touch to watch Youtube video is very good and the speed is excellent!
The steps suggested above are not exclusive. There are too many factors which influence the performance of Wifi. Hope you will succeed and enjoy the Ipod Touch in the New Year 2008!

My Airport base station has a status message that says "This AirPort base station doesn't have any DNS server addresses and might have trouble connecting to the internet." What does this mean and how can I fix it?

My internet is still working, but it's very intermittent. This happened after I updated the firmware a few days ago.

Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network

Adobe Photoshop 2014.2.1 There was an error installing this update. Please quit and try again later. Error Code: U44M1I210.....any help for this, my updates have not updated for 208 days!

error when installing PS update? for 208 days! Help!

http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

Time Capsule blinks yellow,when I go to airport utility to set up, it Says This apple wi-fi bse station doesn't have any DNS server addresses and might have trouble connecting to internet. My internet works, but I can't back up anything. What do I do??

Worked fine for about a couple of weeks after my son -law installed the time capsule. I can access the Internet both from my wife's I phone and from my desktop. I think that I need to get the DNS server numbers and put them in the two blanks; but where do I get them? Thanks, Jim

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

I HAVE TROUBLE CONECTING WIFI FOR IPAD 4G

I HAVE NO TROUBLE CONNECTING AT HOME . BUT WHEN I AM ON TRVELING IN SOME HOTELS LIKE IBIS I HAVE SERIOS TROUBLE IN CONNECTING IT REGISTERS AND THE CLOCK KEEP GOING ON, NOTHING HAPPENS ANY BODY HAS SOLUTION FOR THIS TROUBLE PLEASE LET MEKNOW

Don't use all CAPS when posting. It's considered shouting and many helpers won't answer. Plus it's hard to read.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My iphone 3gs is struggling to update apps over my wifi! it will download apps and browsing is finetc just updating :S

anyone got any ideas???

Now it's Wednesday (2 days since I originally posted) & my iPhone appears to have finally restored all my apps, but it still says it's restoring from iCloud backup. If all my apps are restored, what else could it be restoring? IS it actually restoring anything at this point, or is it still in 'glitch' mode??? I've tried turning it off & back on & it continues to say that it's restoring.

I can't see any mac´s with Wifi but with ethernet works fine

I have a net with a 10 apple macpro and 3 macbook pro, all with OSX 10.7.4, all macpro are conected with cable in the ethernet port, and works fine all bonjour services, like ichat, shared files and folders, etc. But all my macbook is conected at the same lan but with a wifi and all dont see anything, bonjour is not working.
Recently mi ISP change my router. but the firewall is disabled.
Please Help!!!

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

You do not have access to any End User Layer tables

Hello Guru's!
I'm having an issue with connecting/using EULs on Disco 10g - I have already installed 10g Admin and configured 2 EULs and also imported the sample data - they are all owned by DISCO user -
When I connect to http://discoserver:7778/discoverer/viewer, I get a connection screen - no connections are listed, so I click create connection - I give it a name, put in disco as my user, put my password in, put db_connect_string into the appropriate field, where db_connect_string is my actual connect string - and it gives me this error:
Error
Authentication Failed.
(You do not have access to any End User Layer tables)
I have access to these, as I'm the EUL owner - I've also tried this tho with other users that I have granted access to in the admin too (I've even granted access to these EULs to public - still no luck) - should I be using the db user and password or are there other places in 10g that I set up disco users?
If I should be using the db user and pass, why won't it see my EULs?

Hopefully CupJr got his answer as it's been over 2 years!
However, if you're having the same problem ...
1. is this an Apps EUL and you're connecting as a database user (ie: the owner of the EUL)?
2. have you set the gateway connection info correctly (again if an Apps EUL)? - found at: Tools -> Options -> Connection.
Russ

TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

Iphone 3gs with ios5 update. bluetooth connection with car problem.

I updated my iphone 3GS to IOS5. After the update, the bluetooth (handsfree) connection to my car (Lexus RX350) does not work anymore. I can connect any other cell phone bluetooth to my car. Only iphone after the IOS5 update is failing. Any suggestions (I reset many times)?

Some people havent had one problem when updating to iOS4, others have been over run with problems. I myself have lost virtually all sound from my loud speaker so calls, txt messages and ipod are virtually unheard now..
Went to my local Genius bar in Liverpool today, complete waste of time, the guy restored it like I hadnt already done that a 100 times, then said oh yeah it is qeit not heard of that one before, to get a new one will cost you £139!!
Yeah right mate, not payin that as its not my fault! did ask him if he ever looks on the Apple forum about faults people are having, and I got a blank look. Told him a thread with tens of thousands people all having the same problem with low sound from the speakers and calls being ended in mid conversation since updating to OS4 seems a bit strange then... another blank look!
Ive lost all faith with apple as a company now and will not be upgrading to a iPhone 4 anytime soon or any apple product, no one seems interested in helping but quick enough to take your money, thats my opinion anyway..
Gaz

Have 18g of other on 3gs after ios5 update. what is this and how do you get rid of it?

have 18g of other on 3gs after ios5 update. what is this and how do you get rid of it?

\Based on other forum users' posts, it seems like all you need to do is Restore the phone from your latest backup, and that should "refresh" your phone's appraisal of its data storage.

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

ı have bought second hand ipad. 17 apps which were downloaded by previous user with his or her apple id. I need to update them but when I try, ı can't update them with my own apple id. Device ask me to update with the id and password of previous user.

ı have bought second hand ipad. 17 apps which were downloaded by previous user with his or her apple id are waiting to be updated. I need to update them but when I try, ı can't update them with my own apple id. Device ask me to update with the id and password of previous user. I tried I forgot but this didn't work. So how can ı have my device forget the previous ID and use my own to update exsisting apps.
<Email Edited by Host>

Restore the device to factory settings with iTunes.
Then launch the App Store app on the iPad and sign in with your Apple iD and password:
OT

After a rescent update on my ipad 3 Ican no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?

After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?

What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address?

Any 3gs user with ios5 update have trouble with wifi?

Similar Messages

Maybe you are looking for