Any 4S cases work with universal dock?
I'm finally upgrading to the iPhone 4S. I'd really like to find a case and/or universal dock adapter combination so I can continue to use my univ. dock for charging.
I'd prefer to avoid having to remove or otherwise adjust the case to make it work. Dock stub extenders aren't ideal either.
I have an Agent18 case for my 3GS which came with a dock adapter and works great. Have not been able to find a comparable unit for the 4S.
Any recommendations??
Thanks for your ideas.
Any case that's a slider case. I would suggest the InCase Slider.
Similar Messages
-
Hey, I'm looknig for a case that will work with the dock. Are there any out there? I really like using the dock to sync my phone and I'm not happy loosing that feature in order to use a case.
I'm already aware that the iSee case will not work with the dock http://www.contourcase.com/isee/iseeiphone/ . What about the other cases out there?This looks like it might do the trick:
http://www.senacases.com/Brands/Apple-iPhone-Cases/SENA-DOCKABLE-CASE-FOR-iPHONE
- TL -
My ipod touch is no longer working with universal dock since downloading the new OS
I have the Apple Universal Dock. It had been working fine with my ipod touch. I just downloaded the new OS and now my ipod touch will not work with the Universal Dock.
Any ideas?Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy -
IPhone doesn't work with Universal Dock remote?
Hello,
I received an Apple Universal Dock with remote for Christmas, and I'm pretty sure I remember it and the remote working just fine with my iPhone when I first set it up. Today, I tried using it again, and found that I can't use the Universal Dock's remote for anything other than controlling the volume, and even though I can raise or lower the volume with the remote, the volume change is not reflected on my iPhone's screen - the iPhone's ipod volume indicator doesn't move.
The Universal Dock and remote work just fine with my wife's second generation nano, and the iPhone works without any problems when docked into a Logitech mm50 speaker system - the mm50's remote is able to jump forward and backwards through songs, pause, play, etc. The problem seems limited to the combination of my iPhone and the Universal Dock and remote.
Is this normal? According to the Universal Dock's package and documentation, it is compatible with the iPhone and doesn't mention anything about the remote having limited capabilities when used with the iPhone.
If this isn't normal, does anyone have any suggestions on how to fix this?
thanks in advance and best regards,
tomi just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?
-
IPod 3rd gen not working with universal dock
My old iPod 3rd gen (15GB, touch wheel, dock connector) worked great with the old dock, until the latter started scratching noises when outputting audio to my stereo. Still charges the iPod though.
So, I tried old iPod with the universal dock I got for my Touch and found the following problems:
1. iPod is not being charged through new dock plugged to wall adapter
2. touch wheel menu control is not working as long as iPod sits in universal dock plugged to the wall adapter - the sound of clicks is all I get, but no control of menu or any other function. In order to select playlist or use any other function through touch wheel or any of 4 buttons I need to unplug power from the dock (it is not charging anyway)
3. remote is not working at all
Otherwise playback is OK.
Any ideas what may be the culprit here? Apple states that Universal dock is compatible with 3rd generation of iPod and up.Hello Andrew,
What a coincidence as I too have had to find a new dock for my 3rd gen ipod. This week I purchased an Apple AV Connection kit - but found that it would not charge the ipod or respond to the remote. I also bought and tried a Belkin AC adapter with cable to power up the ipod but it too would not charge the ipod.
To see if these units were working I connected them to a friend's brand new ipod classic and both the Belkin and Apple AV Connection Kit worked fine - so there is something different about the 3rd gen ipod.
I'm not sure if this helps you - but at least you know it's not just your ipod that is not working with the new dock.
Nick M. -
Airclick work with universal dock?
Hi, Would the griffin airclick remote control work with apple's universal dock?
KimmiNo. The receiver fits into the dock connector on the iPod.
-
Remote doesn't work with Universal Docking Station
Hi
I have an iPod nano 3rd gen. Whilst in the dock the remote doesn't work at all until I select some music manually using the nano controls. Then I get a response. This is the second docking station from Apple.
Surely it has been designed to work with the remote as soon as it has been docked to enable scrolling through the menus? There are archived discussions from years ago about the same problem and no solutions! It appears that this product is known to be defective by Apple yet they do nothing and when you call them they act as if the problem doesn't exist. They appear to be selling products that don't work and then do nothing about it.i just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?
-
Cases that will work with Accessory Docks for Bionic
I am looking for a case that will protect my Bionic and also work with the car and home docks. Does anyone know what cases will work and still protect the phone well? I really want the otterbox commuter series, but I doubt that will work with the docks.
Any help is appreciatedIf motorola follow the pattern they did with the Droid X and X2 you may nor see a case that will work with the dock because the dock wasnt made to accept a case while using it... I know its crazy but universal docks from Walmart or Best Buy is the only way to make this possible.
-
Smart case work with dock?
Any one know if the new iPad Smart Case will work with the dock?
I don't believe it will because the dock was designed for the iPad space only. I think you have to take off the case to put it on the dock.
-
IPod with Universal Dock and Logitech Harmony 880 Remote
Is anyone successfully using their iPod with Universal Dock and the Logitech Harmony 880 remote? Does it need to be trained or does can you use the logitech software to program the remote?
Is anyone successfully using their iPod with
Universal Dock and the Logitech Harmony 880 remote?
Does it need to be trained or does can you use the
logitech software to program the remote?
You can program the 880 to work with the Universal Dock with just the logitech software. Just add a Digital Music Server and when asked what Model it is enter "iPod Universal Dock". That's it. For some reason Logitech tech support says it can't be done but me and and a couple of friends have done it without any issues. -
Does this iPad 2 case work with the new iPad?
Would this iPad 2 case work with the new iPad, or any other similar cases that do?
http://www.amazon.co.uk/gp/product/B00545KFFQ/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=1036 12307&pf_rd_s=lpo-top-stripe&pf_rd_t=201&pf_rd_i=B0050NG1PU&pf_rd_m=A3P5ROKL5A1O LE&pf_rd_r=1DFKVP1TXB9TEN4YGM61
Thanks for the help.If it's made of rigid material (which I think is the case), then, most probably it won't. I certainly wouldn't pay 30 pounds for it just to find out it doesn't work.
As sagarpachorkar has stated, iPad 2 cases made of non-rigid materials, generally, have a much better chance of fitting the iPad 3 too. -
Iphone 4S won't work with bose dock
Iphone 4S won't work with Bose Dock Speaker
I have this same problem newly purchased iPhone 4s will plug into my Bose Dock. It will still charge and connect as if to play music but no sound will come out
-
Will any wireless printer work with my iPad
will any wireless printer work with my iPad
http://www.apple.com/ipad/features/airprint.html
these will work with airprint
others might work with 3th party apps and apps from the
printer makers -
Does any cd-rom work with my mac?
Does any cd-rom work with my Mac?
Most do work. You don't have to buy Apple's superdrive.
-
Hi,
I plan to order the 5G iPod and Universal Dock tonight. I will want to be able to play photo slideshows (both photos and sound), and videos, through my TV. To do this, I plan to place the iPod in the Universal Dock, then connect the Dock to the TV by a S-Video cable. As I have read that this method gives a clearer/better signal compared to using the Apple iPod AV cable.
Is this all I will need? Will both video and audio work/transmit to the TV via the S-Video cable? I'm assuming I won't need my laptop there either, as from what I understand, that set-up would be completely stand-alone...?
If a S-Video cable is all I need, can anyone recommend any manufacturers? I can not find an Apple S-Video cable on their online Store. There is a Belkin one though.
Could I get away with buying a bog standard S-Video cable from a local store, for say a few pounds?
Thanks in advance.Oh, drat! So you can either use just the iPod AV cable, which transmits both video and audio, from the iPod's headphone port to the TV, or...
... you can use the AV cable and an S-Video cable (in which case you also need the Dock with you)? With this second option, does the S-Video connection override the AV's capabilties to transmit video - so the AV cable is purely being used to transmit the audio??
Sorry to sound dumb, I have no experience with connecting an iPod to a TV.
Basically, what I want to know, is what I require to connect my 5G iPod up to my TV, to view photo slideshows and videos (both video and audio) - in the best/highest quality format possible. As I said above, I will be purchasing a Universal Dock.
Thanks for your help and quick reply.
Maybe you are looking for
-
I had songs on my PC and my shuffle and my PC crashed. They were unable to restore my iTunes library when my computer was fixed. The songs still remain on my Shuffle, but now it is being replaced with another Shuffle. Q: How do I get my music from my
-
In Ap invoice grid is showing no value when send for approval
Dear Experts, There are 3-4 purchase invoice send for approval when it is open by approving authority the detail grid i.e. where the item details are shown is blank only gross total and net total in footer is showing value and header values. This all
-
XE Client not able to access XE Server database
I have installed Oracle Database 10g Express Edition (Western European) OracleXE.exe on one Windows XP machine and Oracle Database 10g Express Client OracleXEClient.exe on onother. I have followed the instructions to set the Server to accept remote a
-
Project Nightmare 3 years into it...
So my Boss, old Boss no longer, left 2 years ago started a projected I suggested to go VoIP Phone. I gave the cost, savings, down time etc.. if done right.He goes and get 2 companies, one to redo all of our firewalls and access points (From a Site Su
-
Anyone successfull w/ continuing TM backups to another network?
Ok my situation: I have a Mac 10.6.8 server and a external HD connected to server and shared as a Time Machine destination. My 10.8.5 iMac connects to this HD w/ and is backing up is backing up to this TM drive I would now like to disconnect that ex