Any 5.1 Soundcard with Front Panel working under Win 7 64?

Since i'm finally fed up with my X-Fi Platinum not working in Win7 64 i would like to buy something else.
Sadly Creative seems to be the only firm producing soundcards that can have a simultanious stereo output via the front panel while having he 5.1 setup connected at the back.
So as much as i would like to stick it to Creative. But do they have anything with a frontpanel like the Titanium but working under Win7 64?

Originally Posted by icke
Since i'm finally fed up with my X-Fi Platinum not working in Win7 64 i would like to buy something else.
Sadly Creative seems to be the only firm producing soundcards that can have a simultanious stereo output via the front panel while having he 5.1 setup connected at the back.
So as much as i would like to stick it to Creative. But do they have anything with a frontpanel like the Titanium but working under Win7 64?
Hi,
What driver version are you using now? The one that's on the install CD that's included with the soundcard or the latest driver that's available via Creative Labs download service? Provide more info, otherwise no-one can help you. Anyway, the X-fi Platinum (including the Platinum drive bay) should work in Windows 7 x86 and x64.
Try downloading and installing Daniel_K unofficial driver packs for the X-fi and see which one works the best for you.
Daniel_K unofficial driver pack SB X-Fi Series Support Pack 2.5 (10/25/2011)
Daniel_K unofficial driver pack SB X-Fi Series AuzenUAA Pack 1.8 (10/25/2011)
Daniel_K unofficial driver pack SB X-Fi Series AuzenWDM Pack 1.8 (10/25/201​1)
Uninstall the old X-fi drivers first and then use "Driver Sweeper" in Windows Safe mode to wipe X-fi drivers that are still left in the Windows OS. Make sure you create a restore point in Windows 7 first, so you can roll-back if something goes wrong.
Good luck!

Similar Messages

  • Audigy 2 ZS Newbie Question? Is my front panel working rig

    WHOA! I'm new with this card but not posting..don't know what happened with that blank post..(The cat stepped on the "Enter" key...Yea..thats it..thats the ticket)
    Anyway, I just hooked up my card and installed my front panel and I have a couple of dumb questions:
    . Should the front panel be lit's What is the led abouve the MIDI for? Does it just light when MIDI is pluged in?
    2. I have almost no volume at the headphone jack. I have heard others say that it mutes their speakers when they plug into the HP jack, Mine does not.
    3. Wait, is that an LED or the pick up for the remote? Hmmm..just thought of that?
    The remote does work, albeit poorly. The firewire on the front panel works, I can't test much else. I guess my main question is: Does the front panel light up? It just looks like that there is no power getting to it..
    I want pretty lights!! :-)
    Thanks for help
    Phil

    oh man thanks a lot! i knew about that option too, but i completely forgot about it!! lol
    and let this be a reminder to anyone else dumb enough to forget about that little option!
    thanks again

  • Help with front panel audio on K9N board.

    Okay, I admit I'm a bit of a moron with front panel audio but I just can't figure out how to configure this board with my case.  Here are the pins:
    Case:
    Mic In
    Mic Bias
    SpeakOut L
    Return L
    SpeakOut R
    Return R
    Ground
    Motherboard:
    PIN    SIGNAL                  DESCRIPTION    
    1    PORT 1L                  Analog Port 1 -Left channel    
    2    GND                  Ground    
    3    PORT 1R                  Analog Port 1 -Right channel    
    4    PRESENCE#     Active low signal -signals BIOS that a High Definition Audio dongle is connected to the analog header. PRESENCE# = 0 when a High Definition Audio dongle is connected.    
    5    PORT 2R                  Analog Port 2 -Right channel    
    6    SENSE1_RETIRN     Jack detection return from frontpanel JACK1    
    7    SENSE_SEND     Jack detectionsenselinefrom the High Definition Audio CODEC jack detection resistor network    
    8    KEY                  ConnectorKey    
    9    PORT 2L                  Analog Port 2 -Left channel    
    10    SENSE2_RETIRN     Jack detection return from frontpanel JACK2    
    I haven't been able to make any sense of the two, so if anyone here can help, I would appreciate it very much.

    Quote from: crazy on 09-June-06, 15:51:46
    You may tell us more information about your mainboard, please give us the detailed name of your mainboard. :D  Then there will be more users could give some suggestions.
    Sorry, there aren't that many K9N boards out there, but mine is the K9N Platinum MS7250 Version 1.0.  It's the AM2 non-SLI nVidia nForce 570 Chipset model.
    Thanks for any help.

  • Building dll with front panel

    Hi all,
    do you know, can i build with LV Builder dll that will run with Front Panel open when i call it from some another VI?
    I tried build it, but not succesfully.
    The prolem was that if i select in VI properties "Show FP when loaded", dll runs with FP open, but property "Show FP when called" doesn't give same results. Dll runs, but in background.

    Nadav,
    Did you see this recent post about LabVIEW calling LabVIEW DLLs?

  • UTorrent works under Wine

    Hey all, just wanted to let people know that uTorrent is working under Wine.
    This may already be common knowledge, but I tried it earlier and I couldn't get any transfers going. Make sure you have port-forwarding set correctly if necessary. I just successfully finished downloading a torrent, so now I can officially abandon Azureus which has gotten too bloated imho. Anyone looking for a good bittorrent client in Linux can give uTorrent a shot.
    By the way, one of the nice things you can do is automatically stop seeding once you're upload ratio is 1, something I quite like.
    I'm adding this little script for anyone that's interested. It lets you pass
    torrents to uTorrent from Firefox.
    #!/bin/bash
    read torrent << HERE
    $(echo "$1" | sed 's///\\/g')
    HERE
    wine /Path/to/uTorrent.exe "$torrent"
    If you're wondering about the part before the call to wine, it's necessary because uTorrent (being a windows program) expects back slashes in the path to the .torrent file instead of forward slashes. That bit of code replaces "/" with "" in the path to the torrent passed to the script by Firefox.
    To use the script:
    1. copy the code to a text editor and modify it with the path to your copy of uTorrent.
    2. save it as "utorrent.sh," and make it executable: chmod +x utorrent.sh.
    3. In Firefox, the next time you click a torrent link, select "Open with" in the "What should Firefox do with this file?" box that pops up. Click on the drop down list and choose "Other" and find utorrent.sh. If you want you can also select "Do this automatically for files like this from now on."
    4. After you hit OK uTorrent will open (if it's not already) and will be ready to download the torrent.

    Tech-Man wrote:Azureus is still better even though it's bloatware, as the UPnP works fine, whereas the UPnP in uTorrent doesnt work under wine.
    I use fixed ports.
    Tech-Man wrote:
    and before anyone says use fixed ports, thats just one way to get traffic shaped by your ISP hence I use UPnP.
    TM
    uTorrent supports protocol encryption, so they can't see that the packets are torrent stuff.

  • Trouble with front panel adapto

    Hi, I have a Sound Blaster Audigy (SB0090) and my front panel were connected to the motherboard because of the on-board sound card. I disconnected it from the mobo and reconnected it right in the sound card (it's the male connector from this picture: http://www.frontx.com/cpx57p2.gif). Ok, now that it's plugged in, my sound works perfect except that when I connect my headphones in the front panel, the sound keeps going to the speakers and not the headphones.
    I'd like some help with this issue. Thanks.

    KingAlex,
    There has been a lot of discussion about connecting SoundBlaster cards to the front case. A search of the forums for e.g., "front panel headphones" will bring up a long list of messages. This thread will get you started. I don't recommend any of the hacks because if done improperly, they might damage your card. The simplest and safest method is to plug into the rear LineOut/Headphone jack and route this inside the case to the front panel through an unused open card slot. Use a stereo Y-splitter if you also want to connect speakers.

  • Problem with front panel USB connector

    Motherboard: MS-6750
    I have a problem with my front panel USB connector JUSB2 not working.
    I have checked the connection to be sure that it is oriented correctly.
    I also made sure that it was enabled in the BIOS.
    Still no luck.  There is not any voltage on this either.
    I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
    Any ideas on what this is and how I might trouble shoot the USB connector?

    Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard  and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps  Dok

  • HP Pavillion HPE-510f, Windows 7, 64 bit with front panel A/V RCA inputs

    When i connect devices thru the AV inputs on the front panel, I cannot find an application that recognizes the device. For example, JVC Camcorder so i can playback or just playing music thru these inputs.  Is there  a driver that needs installling?

    Hi Hodgewaco,
    As indicated in the title, the front A/V RCA and s-video are input ports.  To use those ports with your videocam you are going to need a capture program.  ROXIO has commercial programs that should work with those input ports but check with ROXIO Sales.  Usually ROXIO has a 30 trial period so if you are not satisfied the your can get a refund.  Be sure to inform ROXIO about the exact model of camera that you are using, the output connection type and the format of the video stream.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Is The Front Panel Worki

    I haven't installed the new driver yet for my SB X-Fi Platinum. I need the Aux inputs on the front panel for my WX5 Wind Controller. Are they acti've with the new driver or do I need to wait for some other software?

    the main reason i bought my Audigy2 Platinum was so i could plug my shure sm57 into the /4inch mic jack for recording guitar i even use it for voice chat, sure beats a cheap 0 dollar mic, and i use the rca jacks for recording from tapes, records or plugging a keyboard in, if i cant do that it doesnt matter what sound card i have. From what i've read and heard about the X-Fi, it works for some and not for others. the front panel connectors i use on a daily basis. hopefully by tomorrow ill have the audigy drivers to test out.

  • Audigy SE: Possibility to connect with front panel audio in/

    I have a case which has an audio in and out jack on the frontcase. Is it possible to connect these with an connector on the Audigy SE?

    Quote from: msiAMD6400 on 25-December-07, 21:57:43
    My "disable front panel detection" is unchecked.
    It is not clear to me if you were able to check (enable) the box. The setting you need is "disable front panel detection" checked; that means the motherboard delivers the output to front panel, irrespective of there is a headphone connected or not.
    If you are unable to check that box, i am not sure where is the problem. If you can, i expect you see a pop up window asking you what you have connected to the front panel, by default it should be an audio output option like headphone. Make sure, as I mentioned already, that you can see inside the audio software window the status of all the audio input/output sockets in different colours. The 2 icons representing the frontpanel should be highlighted and you should be able to designate what output/input you want from each of them. If this doesn't happen there is no point in connecting the audio out cable to the header (unless you have the appropriate MSI frontpanel cable which provides jack detection)
    If you have successfully disabled the detection, you just need 3 wires to get output (things work when they are simple). Forget about the looping; you don't need them if jack detection is disabled.
    I suggest you connect the 3 wires to the pins as shown in the manual.
    Note the pin configuration diagram for the "JAUD1" header. I think the common/ground wire from your headphone socket should be  to pin 2, Right out to pin 5 and left out to pin 9.
    Let us know of your results.
    Siby

  • Problems with front panel audio input on hp media center pc

    I can't get the audio input phono jacks on the pc front panel to work. Am trying to transfer audio casstettes to my pc. Cassette player works fine.
    This question was solved.
    View Solution.

    Please provide the model number or product number of your system to support you further...
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Lenovo Fingerprint Software stopped working under Win 8.1

    Just upgraded to Win 8.1 (64-bit) and to the latest drivers for W700 (2753-WBB). 
    Major trouble with the Thinkvantage Fingerprint Software.
    The Lenovo Fingerprint Software version 3.3.2.50 for Win 7 (64-bit) was fine under Win 8.0
    but it doesn't work any more under Win 8.1
    http://support.lenovo.com/en_US/downloads/default.page?
    The Thinkvantage Fingerprint Software isn't compatible with W700 and W700ds.
    Thinkvantage Fingerprint Software Version 5.9.9.7282 for Windows 8 (64-bit) or 7 (64-bit)
    supports only the ThinkPad W510, W520, W701, W530 systems
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029769
    Thinkvantage Fingerprint Software Version 6.0.0.8102 for Windows 8.1 (64-bit or 32-bit)
    supports only the ThinkPad W510, W520, W701, W530 systems
    http://support.lenovo.com/en_US/detail.page?DocID=DS036923
    The management of complex passwords becomes difficult without Fingerprint.
    Any ideas?? Thank you.

    Hi Katiedonut,
    I’m writing to just check in to see if the suggestions were helpful. If you need further help,
    please feel free to reply this post directly so we will be notified to follow it up.
    If you have any feedback on our support, please click here.
    Best Regards,
    Anna
    TechNet Community Support

  • Cannot get Extensions with iFrames to work under Windows

    Currently we are unable to add an iFrame to the main HTML panel without the Windows version of Adobe InDesign closing the extension automatically.  This works correctly on the MAC.

    Hi!
    I would suggest the following:
    Insert your Snow Leopard disk, when you are in Windows 7. Install the Bootcamp 3.0 drivers.
    Then restart your computer into Windows 7 and apply the Bootcamp 3.1 update.
    Then, you can try again running Starcraft 2 beta. However, you can not be sure that this beta version
    will be running.
    With regards,
    Dagd

  • Cannot get Adobe Extension Builder Extensions with iFrames to work under Windows

    Currently we are unable to add an iFrame to the main HTML panel without the Windows version of Adobe InDesign closing the extension automatically.  This works correctly on the MAC.

    Okay, for anyone that is also having this problem I believe I figured out the problem. Adobe files are saved under .xpi extensions which is just another type of .zip file. If you do not have winzip installed you cannot install flash player. I now have mine working. Good luck!
    www.winzip.com

  • Firefox 17.0.1 Crashes with "Script is busy or has stopped to work" under Win 8 Pro 64bit - no problem under Win Vista Ultimate 64 bit.

    Firefox hangs and takes a few minutes to run again :( until next hangout :(((( Reinstalling didn't help.
    My plugins:
    Adobe Acrobat
    Adobe PDF Plug-In For Firefox and Netscape 11.0.0 11.0.0.379 Aktuální
    VLC Web Plugin
    VLC media player Web Plugin 2.0.2 2.0.2.0 Aktuální
    Shockwave Flash
    Shockwave Flash 11.5 r502 11.5.502.135 Aktuální
    Java Deployment Toolkit 7.0.100.18
    NPRuntime Script Plug-in Library for Java(TM) Deploy 1.7.0.10 Aktuální
    Java(TM) Platform SE 7 U10
    Next Generation Java Plug-in 10.10.2 for Mozilla browsers 1.7.0.10 Aktuální
    Microsoft Office 2010
    The plug-in allows you to open and edit files using Microsoft Office applications Neznámý modul
    NVIDIA 3D VISION
    NVIDIA 3D Vision Streaming plugin for Mozilla browsers Neznámý modul Vyhledat
    NVIDIA 3D Vision
    NVIDIA 3D Vision plugin for Mozilla browsers Neznámý modul Vyhledat
    iTunes Application Detector
    iTunes Detector Plug-in Neznámý modul Vyhledat
    Pando Web Plugin
    Pando Web Plugin Neznámý modul Vyhledat
    Google Update
    Google Update
    Any idea?
    Thank you.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Disclaimer in Sharepoint 2010

    I'm trying to set up a pop up window with a URL to a document each time my Sharepoint site is loaded. I read that it can be done by adding a content editor web part with a following code to a page: <script src="/_layouts/sp.core.js" type="text/javasc

  • ISE url-redirect CWA to Gig1

    Hello, say I want to have five ISE 1.3 nodes behind load balancer, I want only only G0 behind LB, and G1 interfaces will be dedicated for certain things. Specifically I want to use G1 interface for Redirected Web Portal access (could be CWA, device r

  • Need to remove a virus

    I got a virus on my mac book pro, my wife says she open her e-mail and then the computer went nuts haha. It show the desk top with a virus box and it say that I need to install this program to remove them or cancel. Ether one I click on it starts to

  • Spry image gallery

    Hi there, just a question, I created a spry image gallery successfully with thumbnails on the left and the bigger image and details on the right, my problem is its created it with all the thumbs going down vertically after looking everywhere i havent

  • Edge Animate doesn't respond to trigger, auto-plays to the end while previewing in the browser.

    I've this strange problem with EA. I was working on a project which was doing pretty well. You may see it over here. This afternoon I wanted to make some progress, opened the file, clicked preview in browser. What I saw was the auto-play of animation