Any 802.11u data to analyze?

hi,
i have a question for you, so can anybody help me.
does anyone have any "802.11u" network data to analyze, I need them for my seminar
i'm using wireshark

I posted a 802.11u capture I received from Omnipeek when I was down there last week. Its on my blog ...
http://www.my80211.com/home/2012/9/20/wildpackets-gestalt-it-wfd3-wildpackets.html
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Similar Messages

  • Airpcap and WireShark support for 802.11k, 802.11r, 802.11u?

    Folks,
    I have a need to troubleshoot/test 802.11k, 802.11u, and 802.11r messaging.
    Does anyone know if AirPcap Nx + Wireshark will capture and properly decode these 802.11 amendments:
    802.11k
    802.11r
    802.11u
    I have looked in Wireshark forums and seen references to all of the above amendments but I can't find anything conclusive to indicate the level of support for these headers/fields/messages.
    Thanks for any insight.
    Joey

    George,
    I don't know yet. However, to begin testing devices I'll need a tool that can decode the protocols so I can see who supports what.
    Based on my research for evidence sake,
    Wireshark 1.7.0 dev branch appears to:
    Support 802.11u fully
    Support 802.11r fully
    Support 802.11k partially
    The 802.11k information elements I can't find or are not supported for 802.11k are:
    7.3.2.42 Measurement Pilot Transmission Information
    7.3.2.43 BSS Available Admission Capacity
    7.3.2.44 BSS AC Access Delay supported
    7.3.2.45 RRM Enabled Capabilities 
    7.3.2.46 Multiple BSSID 
    -Joey

  • How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes?  I need step by step instructions for first-time sync with ipad mini.  Thanks.

    How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes?  I need step by step instructions for first-time sync with ipad mini.  Thanks.

    If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
    First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
    Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
    That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
    http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

  • My phone won't switch on or do anything at all i woke up thismorning and it is broken, the battery was charged fully. how can i get it back on without losing any of my data?

    Hi,
    I have had my phone about A year and I have never had a problem with it before, but i woke up thismorning and opened my text's put it back in my pocket, half an hour later it was completely broken the screen was black and it will not switch on or do anything at all (I have not dropped it or had it near water).
    Is there a way i could get it to work again without losing any of my data i have been away with work and have not backdated for 2 weeks and i really dont want to lose it all.
    Any help to get it working would be fantastic.
    Thank you
    Samantha

    Thank you so much
    Kiss Kiss Kiss Kiss
    Life saver
    Best wishes and Many thanks
    Samantha

  • My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

    My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
    Thanks !!
    Alain

    Could that read " . . . could not access . . ."?  If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
    If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

  • Is there any table in data dictionary has all clients and their email ids?

    Is there any table in data dictionary has all clients and their email ids?

    Hello,
    KNVK-ADRNP_2
    use this to pass to the bapi BAPI_BUPA_ADDRESS_GETDETAIL. this is function module & will return the address details in diff itabs..
    You can also try the Table ADR6 field SMTP_ADDR where ADDRNUMBER = KNVK-ADRNP_2.
    *************Reward points,if found useful

  • Cannot read any form posted data

    I create a web server :
    import java.io.BufferedReader;
    import java.io.InputStream;
    import java.io.InputStreamReader;
    import java.net.ServerSocket;
    import java.net.Socket;
    public class TestWeb extends Thread {
        Socket soc;
        ServerSocket server;
        InputStream is;
        BufferedReader br;
        public void run() {
            try {
                while (true) {
                    soc = server.accept();
                    if (soc!=null)
                    is = soc.getInputStream();
                    br = new BufferedReader(new InputStreamReader(is));
                    String line = "";
                    while (line!=null) {
                        line = br.readLine();
                        if (line==null) continue;
                        System.out.println(line);
            } catch (Exception ex) {
                System.out.println(ex.toString());
        public TestWeb() {
            try {
                server = new ServerSocket(80);
            } catch (Exception ex) {
                System.out.println(ex.toString());
        public static void main(String[] arg) {
            try {
                new TestWeb().start();
                System.in.read();
            } catch (Exception ex) {
                System.out.println(ex.toString());
    }It can read the header when someone connect to this server
    However, it cannot read any form posted data.
    Does anybody have any idea?
    The following is the html source that i use in a browser to connect to the test server
    <HTML><BODY>
      <CENTER><H1><FONT COLOR=BLUE><B>Test</B></FONT></H1></CENTER>
      <HR>
      <FORM METHOD="POST" ACTION="http://127.0.0.1">
        <INPUT TYPE=TEXT VALUE="abcde">
        <SELECT>
          <OPTION VALUE="1">1</OPTION>
          <OPTION VALUE="2">2</OPTION>
        </SELECT>
        <INPUT TYPE=SUBMIT>
      </FORM>
    </BODY></HTML>

    I would expect the form data posted to be received. For example, the user chooses the option value and the text input value.
    This test is hang just after receiving the header information and no parameters collected.

  • Airport Express, Front Row, and Leopard - any expected fix date?

    I've found a bunch of articles that discuss the problem of Front Row under Leopard not working with remote speakers via Airport Express. This worked well for everyone under Tiger.
    I haven't found any projected fix dates from Apple ... any insight into this? Or is it common for Apple to leave these types of feature drops out there with no fix dates or realistic workarounds? I will say I have had very few problems with Apple gear, and I am a fan, but this problem impacts the major reason I put this multi-airport setup in place ...

    If you search in this area you will find many threads on that topic.

  • Should cancelled mailbox moves result in any moved mail data removed from target server?

    I was moving mailboxes from 1 DB to another. 3 out of 120 were left running for 12 hours; they were the biggest ones and it was very slow to process the items. There were also reports of slowness on the server so I had no choice but to cancel the moves.
    My question is should cancelled mailbox moves result in any moved mail data being removed from the target database? It doesn't appear that my disk as increased in space again so I'm wondering if it's there as whitespace maybe? There is an event logged to say
    the mailbox has been deleted from the target.
    Would appreciate if someone can clear this up and possibly explain exactly what occurs during this type of scenario.
    Thanks.

    Hi,
    Thank you for your kindly remind.
    In Exchange 2000, 2003 and 2007 mailboxes become unavailable during movement, when a mailbox move takes place, the mailbox isn't actually moved, it's just copied to the destination location. Once that copy has finished, AD is updated to point to the new location
    and the old mailbox is deleted from the source EDB file.
    The most different between Exchange 2010 and legacy version in move mailbox is that allows end-users to be online in their email accounts. On completing the move users just needs to reopen their Outlook clients.
    Mailbox Move Requests are a new feature set of Exchange 2010 and requires running a series of Cmdlets to perform asynchronous online mailbox moves with the help of a service agent called Mailbox Replication Service (MRS). MRS is available on all Exchange 2010
    Client Access Servers.
    Best Regards,
    Allen Wang

  • Difference between "Type Any" and "Type Data"

    <<Moderator message: don't post the same question in more than one forum - duplicates deleted>>
    Hello Everybody,
    Could anyone please tell me the difference between below two declarations:
    Field-symbols: <lv_first>      type any,
                          <lv_second> type data.
    Edited by: Matt on Nov 6, 2008 1:34 PM

    I will tell you where you can find the details;
    1) Goto Tcode ABAPHELP ,enter "TYPE DATA" in the keyword and press ok,
    2) In the Appearing list double click on the data, built-in generic type under sub-node ABAP Environment.
    If you cannot end up finding this, please close the thread and go home :).
    Regards
    Karthik D

  • Can any one tell data match ticket with example  SD& MM

    hi
    this is jagadeesh
    can any one tell data match ticket with example in SD& MM

    Dear,
    Please refer below mention link.
    http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
    Regards,
    Mahesh Wagh

  • IPod Classic is stuck on a restarting loop, how do I fix it without erasing any of the data?

    My iPod Classic(160G) is stuck in a restarting loop and I don't know how to fix it.
    It will turn on so I can see the Apple logo, then it will shut off and do it all over again untill the battery is drained.
    It charges without problems; my laptop won't recognize that there is an iPod plugged in so iTunes doesn't work.
    I would love to be able to fix the problem without erasing any data because I have lots of songs that I no longer have on any computer anymore.
    I would appreciate some help, as long as it won't erase any of the data, thanks.

    I let my 8 year old listen to the IPod that my eldest son gave to me. My 8 year old also likes to take pictures with the IPod. Anyways, she unknowingly put a password on it and tried too many times to unlock it, now it's disabled. How do I enable it without erasing any of the music or pictures?!

  • Data Base Analyzing

    Dear Gurus!!!
    I'm analyzing the growh of the data base, but I have any questions:
    1. The field "Lin Delta", ¿Are record of the table?
    2.  The Total Size (KB) of the DB is = Tabla + primary Key + Indexes?
    3. For What The total size  of the Db is diferent with total sum of the table in the space statistic.
    best regards

    Hi Luis,
    Table indexes are indicated seperately in DB sizing, when u check them in DB02,
    also the following link has info on DB space statistics...
    http://help.sap.com/saphelp_nw04s/helpdata/en/6b/cbb93aa0c3c172e10000000a114084/frameset.htm
    hope it helps...
    Br,
    Sri
    Award points for helpful answers

  • Is AIR-PWRINJ4 compatible to any 802.3af standard device?

    Hi all,
    today i have a special request to supportforum.
    i'd like to know if AIR-PWRINJ4 supports any "non Cisco" 802.af device.
    Is there any data sheet available for AIR-PWRINJ4?
    Thanks for let me know.
    Dieter

    Hello.
    Following this topic, I'd like to ask for help :-)
    I have a CP-6921 and the switch where the phone is connected there is no PoE.
    I've requested a Power Injector (CP-PWR-CUBE3) to sales team, but the delivery time is too far.
    Meanwhile this, I'm wondering, can I attach the phone in a AIR-PWRINJ4= ?
    I have one (spare).
    It's 802.3af compliant, but in the part there is a label which contain:
    OUTPUT: 56V ---- 0.55A
    So, I got this doubt, is there any risk of damage the phone?
    Any help will be welcome.
    Thank you in advance.
    Best

  • Is there any 802.11n wireless bridge or some bridge throughput close to 100M?

    Hi All,
    I'm looking for some enterprise wireless bridge. Is there any cisco 802.11n wireless bridge on the market? or some bridge close to 100Mbps throughput? Thanks.
    Lou

    Hi;
    I'm investigating the exact same thing. After seeing the caveat in the 1250 install guide that said "Don't use it as a bridge!"  (http://www.cisco.com/en/US/docs/wireless/access_point/1250/installation/guide/125h_c1.html) , I called the Cisco WiFi sales engineer assigned to our region, the brilliant and lovely Ms. K.
    She clarified some items for me.
    802.11n relies on several things for increased speed, two of which are multiple spacial data streams (currently two) and the 40MHz increased channel width. When you do point-point, apparently there is just not as much multipoint benefit. She said we would be lucky to see more than 50 Mbps real throughput on a bridge using 1252s at 100m range. BTW, she said that even though the install guide says the 1252s could not be used in bridge mode, she thought it would work; perhaps the 2007 guide is outdated.
    So, we are going to get some antennas and test this. Will try to report back on the results.
    Regarding Exalt, she did confirm that at present Cisco is re-branding and selling them as OEM and support would be direct through Exalt, not TAC. She would not speculate on looming acqusitions, but did jokingly observe that in the past, all the companies that Cisco absorbed went through an OEM re-sell phase ;p
    http://www.exaltcom.com/sublanding.aspx?id=1512
    Steve

Maybe you are looking for