Any additional ways to edit files saved as HTML?

I own Acrobat 9 Pro. It's megacool and today I got to looking at some of the extra features and realized I probably don't have to go out and find a PDF-to-HTML converter. I say "probably" because I just ran a test saving a text-only PDF file as HTML from Acrobat. I've been doing Web design for years, and when I opened up the resulting file in my HTML editor there were problems. Although id does include CSS -- a must-have -- there were still a large number of style settings that needed to be eliminated and all handled by a single CSS selector. I tried doing a search-and-replace in Dreamweaver, which normallly works very quickly even over an entire site, and it started grinding away like my antivirus software does during a deep scan of my hard drives. I did look at the output options in Acrobat, but there was nothing there that indicated I could gain more control over the nature of HTML it generates. Any tips?

The major options you have would be related to HTML 3 versus HTML 4. I doubt that you get much in terms of style sheets since that is not a major part of the HTML 4 standard as I recall. What you do get in styles is likely highly dependent on the tagging. Tagging is the same process that helps in conversion to WORD. Without the tagging, you will most likely lose much of what appears to be formatting. Another option would be to save as a DOC file and then use the DOC to HTML that is part of WORD. However, WORD does not generate very nice HTML and that might be a poor way to go.
I used to get reasonable results with HTML 3 export in AA5, but that did not have style sheets at all.
Have you tried checking out the manual for the options? There are some in the preferences as I recall (I would look at AA9, but on the wrong machine now).

Similar Messages

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Is there a way to edit files?

Is there a way to edit files in iTunes? What I would like to do, in one or two cases, is keep half a file.
For example, I have one file which consists of an interview followed by a song, I'd like to discard the interview but keep the song.

That's helpful, thanks. Is there a way of getting rid of the unwanted portion, so as to save memory?

I can't transfer music and other files from library to my iphone 4 by dragging it.can anyone help me?is there any other way to transfer files into iphone?

i can't transfer music and other files from library to my iphone 4 by dragging it.can anyone help me?is there any other way to transfer files into iphone?

If you want to drag and drop ( don;t know why you would do this), you will have to check manually manage music.
Why not just sync?
iPhone User Guide (For iOS 5.0 Software)

Any easy way to remove files copied to second drive on import that were later deleted from catalog?

If I do an import from my memory card, choose my external hard drive as a second location for the import, and then go into my catalog and delete the bad photos, is there any quick way to also remove those files from the backup on the external hard drive? I've got a ton of wasted space on my external HD due to things that I've deleted and don't know of any simple way to get rid of them short of formatting the drive and doing another export, which takes a long time and isn't something I want to do all that often. Thanks for your help.

I'm afraid there is no easy way to do that. The problem is that in using the "make second copy" option as your prime image backup, you're not using the function in quite the way the developers intended. Their purpose was to provide a method to take an immediate extra copy of the contents of the memory card, thus allowing you you reuse that memory card before your "regular" backup routine has been run. So yes, they have assumed that you would have a separate backup procedure for your image files, which allows for two things:
1. That separate backup process could use an incremental backup utility, which means after the very first run all subsequent runs would backup only new or changed files....and you could also set it to delete from the backup any files you cull from the Lightroom library. Thus your backup wouldn't take up any more space than your originals.
2. Once you've run the backup utility (after first cull so the duds never even get backed up?), the "second copy" can be deleted at your leisure.

I want to print file labels but the avery ap doesn't support their own file labels. Any other way to print file labels from ipad?

I want to print file labels but the avery ap doesn't support file labels, is there ant way to print file label from an ipad?

You cannot save to Dropbox from Pages natively, but there is a workaround that allows you to use the Copy to WebDAV to get things to Dropbox:
http://techinch.com/2011/02/02/integrate-dropbox-with-pages-keynote-and-numbers- on-ipad/
As to the "Send to iTunes" command "not playing ball", if you'll post specifics, perhaps someone can help you sort that out. It should be pretty straightforward.
Regards.

Is there a way to edit the saved StartCfg.cfg file on a Linksys SRW switch?

I have a SRW248G4 switch that I want to edit the StartCfg.cfg file to use as a template for several new switches. The content of the startcfg.cfg file looks to be binary or mostly binary. Is there a way to get the switch to save and load the file in text format similar to the Cisco switches?
An alternate option is to create a templete config on one of the new switches with all the standard settings, save it, upload that template config to the other new switches and change the things that are different/unique from the web interface. This is possible but will take a lot longer.
Thanks,
Kerry Melcher, CCNP

You cannot edit the library file itself, but you could perhaps edit the XLM file and then import that, basically following the procedure you use when the library file has been damaged:
http://support.apple.com/kb/HT1451
You'll need to be very careful about editing the XML, though, as it's really easy to completely mess up your library if you edit the wrong thing. Make absolutely sure you have backup copies of the original iTunes library file and XML file, so you can put them back just in case something does go wrong.
Hope this helps.

Any Good Way To Edit Wordpress In Dreamweaver?

Hey guys,
Firstly here's my site:
http://buyproactolplus.net/
What I want is to be able to edit everything easily in Dreamweaver CS4.I want to take the text from the wordpress editor and copy it into Dreamweaver but I need to see a preview when I make changes without going back and forth.
Is there any way that I can somehow get the previews working accurately instead of just having a blank site when I copy from the editor?
Awaiting response hope there is a workaround. Thanks in advance!
Dean

I forgot to mention that if you want to Preview a dynamic site locally, you must install a Local Testing Server on your PC.
Get one of the following servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP environment in Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Is there any Graphical way to zip files?

Hello fellas,
I've installed Unrar to unzip files (zip, rar, etc). Now I need to zip them and need something easy to deal with. Type commands to every simple task like this is a waste of time. So, is there any way to do it?
Thanks already

https://wiki.archlinux.org/index.php/Li … sion_Tools

Edited file saved as .tiff and I need. jpg

I edited a picture in Lightroom and now the file is a .tiff file. I need it to be a .jpg file. Is there a way to change it? How can I avoid this happening again? Thank you

Thank you for your reply. I corrected the lighting in the picture first in Lightroom, then chose to edit the picture in Photoshop CS2. Then I went to File, Save as in Photoshop and saw the file was a .tiff file and did not have the option to save it as a .jpg file. When I tried to put the photo into elements to create a slide show the picture was not the right format. All of the pictures were .jpg files when I uploaded them into lightroom. Somehow, the few that I chose to edit first in lightroom and then in photoshop ended up being .tiff files. After spending about 2 hrs trying to figure this out I went back to lightroom and chose "Export" and then was able to save as a .jpg. Would still like to know why the picture became a .tiff file?

Best way to edit styles after importing html file?

Windows XP RoboHelp 8 (FrameMaker 9) Dreamweaver
I have been given a large html document of API Functions that I have imported into RH. Most of the information is in tables that don't have an id. I want to change the table formatting, but don't want to do it manually to each instance. I tried making a table style and applying it to the tables, but it didn't bring over all the formatting.
I do not know much html or css, but I'm wondering if that would be the only way to change the table formatting?
As far as I can tell, the tables are not identified with any type of tag in the html.
I messed around in DW with the css editor and created table properties, but don't know how to apply it to the existing tables in the html.
At a loss...
Missy

Borders and shading are controlled in the <table> tag (select the table in the RH Design view and click the HTML tab -- the entire table will be selected in the HTML tab. Scroll to the top of the highlighted text and the <table> tag is the first tag displayed in the selected content). You can do a global Find and Replace on the <table> tag to make them all consistent.
HTH

Any easier way to edit palettes?... answered myself : )

Is there any way to copy and paste palette colors? I know you can save a default palette once you program your new colors in and the new menus you create will take on that palette, but if you've already made your menus before you commit to a color scheme (which is not uncommon) its really cumbersome to have to go to every menu to put the same colors in over and over again. Anyone got a shortcut?
HAH... stupid me... It's late. The restore default palette button works great for this
powermac g4 933

..

How can i visit and edit files on windows partition as i operate leopard?

And vice-versa, just to complement the question. Originally, i can access to the Windows partition and edit some files smoothly, and vice-versa. But since i upgraded my Mac OS from tiger to leopard and reinstalled the window, i can't access to Mac partition while i use windows nor can i edit files in windows partition while i operate leopard I know the Macdrive can partly fix my problem , but i'm wondering if there are any additional ways of fixing the problem. i guess the problem is caused by the different set of format of each partition, what do u guys think?

To access your Mac hard drive from Windows, you would want to check out MacDrive 7, which is really good.
http://www.mediafour.com
Under NTSF, you will be able to read your Windows drive from your Mac drive. However, if you want to write to it, you will need the following software from Paragon.
http://www.paragon-software.com/home/ntfs-mac/

Convenient way to edit libraries

Hello everyone!
Is there any convenient way to edit symbol, swatch or graphic style libraries? The way I do now is quite time-consuming: I open a library I need to edit, create a new symbol, select other symbols of the opened library (so that they appeared withing the generic "Symbols" tab alongside with the new symbol), then press "Save Symbol Lybrary", select the library I've already opened and replace it with the new one (with a new symbol added).
I would prefer just to open a user defined library, drag and drop a new symbol to it and save changes to the library. Is the latter method out there and I just don't know about it? If so, would appreciate a trick to activate that method. Thank you in advance.

Glad you posted as I entirely agree. Updating symbol libraries is time consuming, when it really should be one drag & drop. Makes better sense to save a .file on your desktop and edit and close that as needed.
The save symbol library command saves to a .ai file, which is great but the problem is that it comes up with a lock icon on the bottom right. You can overcome the lock icon, by editing the .ai file directly. You have to drill down to that file location, and after all that you need to close and reopen the floating palette.
So no sadly I believe there is not a better way, unless there is a script or plug in I have not heard about.

My disk0s2 cannot be repaired. Is there a way to recover files on my computer?

My computer had a spinning wheel yesterday that would not go away, so I forced a shutdown (had done it before with no problems). However, now my computer goes straight to the diagnostic tool, and when I try to repair disk0s2, it cannot be repaired. I didn't have Time Machine automatically running, and my most recent backup is too old and I don't want to lose all of our pictures. I'm desperate here - is there any other way to recover files off of this disk?
My MacBook pro is only 2 years old so this came as a surprise. I've scheduled an appointment at the Apple Store but I'm seeing if there is anything I can do to help now...
-Drew

Try using a data recovery product such as the ones listed here. Don't write anything else to the drive until the files are recovered or you choose not to recover them.
(108843)

Any additional ways to edit files saved as HTML?

Similar Messages

Maybe you are looking for