Any Australian memory experts?

I want upgrade my Mac mini memory to 1 Gb, but I don't know what brand of memory will work.
All the Mac shops are charging rip-off prices for memory.
I know that I need the 2700 type of memory, but I read on a Web page that some brands are not compatible with it.
I need a list of memory brands currently available in Australia that will work with the Mac mini!
Please help!

Just ensure that whichever source you buy the RAM from offers a no-quibble exchange warranty should the memory not function as it should. There seems little obvious consistency in which brands work and which don't, and it's not unheard of for RAM that works well to become problematic after a MacOS update.

Similar Messages

Why these features aren't avaiable on iphone?Internal radio,Bluetooth(work with any mobile),Memory slot,Better internal memory( 512 MB),Fast processor,21Mbps HSDPA,Big display(feel da real experience of IOS)Will the next iphone resolve these issues ?

Why these features aren't avaiable on iphone yet ?Internal radio, Bluetooth(work with any mobile), Memory slot, Better internal memory(>512 MB), Fast processor, 21Mbps HSDPA, Big display (feel the real experience of IOS) Will the next iphone resolve these issues ?

For the same reason my car hasn't got in-dash satnav, leather upholstery or a six litre engine. Because that's how the manufacturer chose to make it. If you are unhappy with the specs, don't buy one.
There is no information regarding any new iPhone.

My macbook won't copying anything to any external hard disk drivers same time can copying to any flash memory

my macbook won't copying anything to any external hard disk drivers same time can copying to any flash memory
my macbook with ratina display the newest virsion

my macbook won't copying anything to any external hard disk drivers same time can copying to any flash memory
my macbook with ratina display the newest virsion

Screen Freez (memory expert needed) P6N SLI platinum

on my pc when i install the first two ddr2 800 and one ddr21066 everything is fine but when i install the fourth ddr21066 the system either freezes at boot up or while doing something. can any expert in memory tell me which setting in bios i have to adjust so i do not get this freeze up (mouse andkeyboard) , your comment will be much appreciated.(this is definitely a memory related issue)
MSI P6N SLI Platinum
Q6600
MSI 256 graphic card ATI HD 2400
2 GB crucial DDr2800 CL6 and two DDR2 1066 CL5
mastercoll 500Watts
window xpsp2

im with Jack and MSI doesnt support 1066MHz on the P6N SLi Plat.
Read here:
http://global.msi.com.tw/index.php?func=prodmbspec&maincat_no=1&cat2_no=&cat3_no=&prod_no=1140#menu
Fifth line from top, 800MHz is max.
And yes i know it says so on the box, that 1066 is supported, but it isnt.
But if you think you'll have a faster computer, well it isnt noticeable, that is if you have any gain, cause usually those high MHz DIMM's are on higher latencies then lower MHz DIMM's. If you gain anything its a few nanoseconds we are talking about here.
For instance 1066MHz 5-5-5-18, is as fast as 800MHz 4-4-4-15
Also DDR2 1066MHz is usually overvolted 800MHz memory and thus will have a shorter and sometimes more unstable lifespan.
Furthermore if you use 4 sticks-o-ram on this board, your limited to 667MHz, otherwise your memorycontroller would be overflooded with too much data.

HP Pavilion g6-2330dx. "No Boot Device. Insert boot disk and press any key" Memory test failed

Hi. So I am trying to help a friend with her laptop. It's a HP Pavilion g6-2330dx.
Product #: D1C01UA#ABA
Serial #: [Personal Information Removed]
Windows 8
ADATA 4GB RAM
Toshiba 640GB HDD from the looks of it.
The laptop is unable to boot into Windows, so I suspect the hard drive. But I ran the hard drive test and it passed all the tests. The SMART test and both the short and long test. I ran the tests multiple times and it passed each time. I tried reseating the hard drive and still no go. I also removed the HDD and connected it to my desktop PC to see if it detects and it did. Ran the Windows 7 own HDD test and it passed.
Currently, there doesnt seem to be any operating system at all on the HDD. When I check, there is a C: drive of ~90GB partition that is ~90GB free, but inside there are Windows files/folders. There is also a D: drive Recovery partition that says ~26GB with only ~2GB free, but when I go inside there's only ~350MB worth of data.
So then I ran the memory test (in BIOS) and it failed immediately. I reseated the RAM module. I tried the other slot. It still failed. So is it safe to say the memory is the cause of this problem?
Pressing the F11 key that is supposed to take me to the System Recovery only leads me back to the black screen with "No Boot Device. Insert boot disk and press any key"
I even tried to install Windows 7 to see if it'll work. I was able to get the laptop to boot/read off the Windows 7. But when I click to install, it asks for a boot device driver or something like that.
My friend doesn't have the recovery disk either. I guess she lost it.
Anyway, is it as simple as replacing the memory or could it actually be the HDD (even though it passes)?
EDIT: This is what the System Log in BIOS says
0021           Time: 10/13/2014
03F0           Time: 10/13/2014
03F0           Time: 10/13/2014
The date was the first time I ran the tests. I havent received those numbers (error codes?) since.
EDIT: Just for kicks, I ran Memtest 2.11 just now (forgot I had the disc) and it immediately went red with thousands of errors, hah.

Hi bghs,
Welcome to the HP Forums!
It is a fantastic place to find answers and information.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you were unable to boot into Windows, and you suspected the hard drive and tested it, but it passed both short and long test. With that being said and the fact that it also passed leads me to believe the hard drive is fine.
You tested the memory and it failed. You tried reseating and swapping slots but they still failed the test.
I would test each card individual with the memtest to determine if it is just one or both cards that have an issue.
When you installed it in another computer, you did see the recovery partition. Once the memory issue is resolved, if you are still unable to boot into Windows, I suggest you do a recovery with the minimized image.   Here is a link to Performing an HP System Recovery (Windows 8) to assist you with that process.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Will I make my 2009 Mac desktop any more memory efficient by running current files, (not applications such as Indesign, Photoshop), from a portable solid-state drive? Is it worth the trouble? Thanks

I have a slightly old Mac desktop and it is starting to slow down a lot now that I am using Adobe CS6 software. It is my final year of a 5 year architecture course and I can't afford to buy a new Mac.
Some of my fellow students are having similar problems with laptops and are running applications and files from portable drives - they wiped their entire Macbooks clean. I don't want to wipe my computer and start again as I may lose some of my oldest software which I have lost CDs for. Will it make any difference to run just my active files, or even move my most memory intensive software programs, to an external drive?
My desktop has maximum RAM installed.
Any advice much appreciated.

1. OWC or Crucial are recommended sources for memory. You can usually find a 5% off and free shipping code for Crucial on retailmenot.com. On crucial just key in your system information in their memory selector.
2. Your system likely supports SATA II speeds, so the SSD OWC pointed to would work. I installed one in our 2010 mac mini and it's working well. I originally installed their 6G drive however it ran at SATA I speeds. Turns out the 3G which is specd for SATA II is what was needed and works fine.
3. The OWC package they recommended includes a case to put your existing hard drive in. That helps to be able to transfer your data back to the SSD then you can use it as a backup drive or as an external storage device.

Any website builder / experts here?

I have exhausted the limited "experience and experts" on the Adobe Muse Forum so I thought I would see if there is a broader base of general web build knowledge here.
I have some basic questions about metadata and meta tags and page titles that are generic to all Web "design'. builds
If anyone is keen to engage...stand up and identify your self.
Question 1:
Site Pages are standard named : Home , About, Gallery, Show Reels, Contact ....and they form the Page Link Menu Bar. ( Changing these automatically changes the Menu Bar Content)
How does one achieve ... "mycompanyname - Home" , "mycompanyname - About" , "mycompanyname - Gallery", etc..... when some one bookmarks the page from the website.
No value to me or them if they bookmark a page that only says "Home".

No. I could have, but I just took the three parts of the frame they gave me and filled them all black.
It was your suggestion to eliminate the arrows. I left the two pieces on the sides to help me center the videos, and if I was going to add more videos, I might do this to make it obvious. Note that I added a red stroke of one pixel. You have to look closely.
If I wanted to, I could have simply taken out the border and replaced it with a Photoshop image where the single pixel width lines were to be exactly covered by the 1280X780 embedded video. Now that I think about it, a simple black box with guides that are to be covered exactly by the video makes a lot of sense. Hmmm... I think I will try that before finishing this post.
OK, I did it.
So, now the image looks like this. In Photoshop, I blew it up to around 400% to that I could place the red lines at exactly 31 pixels in from the edge. So they would be exactly covered. And then all of a sudden I realized that while the HTML said 1280X750, it was actually getting placed in at 1280X754, and I have no idea why that is.
So, back to Photoshop to bring the red markers in from the edge. I have to say this has been frustrating. I first tried using math to place the markers, then I gave up and just moved them around as needed to get it right. But even though the left and right side are even, when I use them as markers in Muse, the lower right protrudes farther than the top right, which makes absolutely no sense at all. However, it looks pretty decent if I just cover the markers. But it might be one or two pixels off from video to video. Quite annoying.
Anyway, check out the site now. It is now just a simple black box with guides to help place the video. Which means, it could be any image. Like theater curtains, or whatever.I thought I could just place it behind the lightbox, but that didn't work out because it kept becoming part of the lightbox.
So I created a new master page and put it there. You might have to mess with it a bit, but here is the PSD file. I exported it to JPG but if you are going to change it, you need the original.
http://www.stevengotz.com/files/Border-for-Muse.psd
Just to keep things neat, I created a copy of the page. You will find it here: lightbox-test-2
Testing shows the red markers when the videos change, so you will want to create a second master, one without the red markers. It is easy enough to change the master, add new videos, and then change the master back.

Error on startup, Any of you experts want to help?

Hey guys,
Ive had itunes on my computer for a few monthes now and its been working fine, but yesterday i decided to upgrade to the latest version. Now, Im getting an error when I start iTunes that says itunes has encountered a problem and needs to close. Ive tried everything: uninstalling, installing older versions.... So I finally decided to call Apple. Well first off i have to say that i run Windows XP pro 64x Edition. So the Apple guys says that its not supported and he cant help me.
So, I know my version isnt supported, but it worked perfectly before. Does anyone have any suggestions on what to do next? Im thinking i may just do a system restore to before i updated, because this is rediculus.
Thanks for ANY help!
-Zach

hi Zach!
So I finally decided to call Apple. Well first off i have to say that i run Windows XP pro 64x Edition.
gaah. in that case, the most likely cause of your issue is actually a QuickTime Player incompatibility with Windows Update KB908531 on x64 (and apparently some 32-bit versions of Server 2003). if that's the case, it will be the broken quicktime that is taking out the itunes on start-up.
for some information on the current state of play with troubleshooting the problem, see the following thread:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=2416229
love, b

Can I add any more memory to my Macbook or am I maxed out?

Can I add more memory, or is 4 gigs my max?
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.53 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP51.007E.B06
SMC Version (system):          1.33f8
Hardware UUID:          C253F167-B468-5719-9F8C-0A70144AD421
Sudden Motion Sensor:
State:          Enabled
Memory Slots:
ECC:          Disabled
BANK 0/DIMM0:
Size:          2 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x80CE
Part Number:          0x4D34373142353637334448312D4346382020
Serial Number:          0x4806C72C
BANK 0/DIMM1:
Size:          2 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x80CE
Part Number:          0x4D34373142353637334448312D4346382020
Serial Number:          0x4806C776

You can use this Link to check which RAM is suitable for your Mac... and how much you can Install...
http://eshop.macsales.com/shop/apple/memory/
It is Important to get the Correct and Matching RAM
For best performance, fill all memory slots, installing an equal memory module in each slot.
That site also has videos on how to Install RAM should you need it...
Here are Apples Instructions... Installing RAM
MBP        http://support.apple.com/kb/ht1270

Can any SAP.LTD experts do a dynamic pdf download tutorial?

Hi,SAP experts,
I have tried to impletmente a dynmaic pdf download project ,say I have got pdf data like xstring type and try to download them at web dynpro side,but unluckly failed. Because the data I got are all dynmacly generated and could not easily used interactive form to display. So I tried to use xsting format and bin_file to transfer them to web dynpro side(Because some experts have implemented this successfully using this method),hoping that can work.But I did't get the good result. And I think this pdf download functionality without interactiveform is quite importtant to many users.So I really hope anyone of SAP.LTD can produce an official turtorial about this topic!
Thanks in advance!

I think he's just asking how to do that? Not really Flex related so much as web-service, but since this is a Flex forum I'll steal code from the very Flex-related AlivePDF:
Sorry these crap forums trashed the formatting. Now, I've never done what you're talking about via a web service (not a big fan) so this may not help at all, but hopefully - do you have access to an HttpServletResponse object to stream back your data? If you do this should get you started I think. If not you may need to do some web-service specific research.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class CreatePDFServlet extends HttpServlet {
public void doPost(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
doGet(req, resp);
public void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
int i = 0;
int k = 0;
int maxLength = req.getContentLength();
byte[] bytes = new byte[maxLength];
String method = req.getParameter("method");
String name = req.getParameter("name");
ServletInputStream si = req.getInputStream();
while (true)
k = si.read(bytes,i,maxLength);
i += k;
if (k <= 0)
break;
if (bytes != null)
{ //Check out this part here
ServletOutputStream stream = resp.getOutputStream();
resp.setContentType("application/pdf");
resp.setContentLength(bytes.length);
resp.setHeader("Content-Disposition",method + ";filename=" + name);
stream.write(bytes);
stream.flush();
stream.close();
else
resp.setContentType("text");
resp.getWriter().write("bytes is null");

Any static routing experts here?

Have a setup involving 3 routers and various workstations as follows
Ont Cat5 -> Actiontec wan port. Actiontec subnet 192.168.1
Actiontec lan port -> Netgear wndr3200 wan port (192.168.1.253). Netgear seubnet 192.168.0
Actiontec lan port -> Dlink dir655 wan port (192.168.1.254). Dlink subnet 192.168.3
Have user devices on all 3 subnets and the can all talk to the internet fine. In addition can access the Actiontec admin from any device on the Netgear or Dlink subnets.
Would like to be able to access the Netgear and Dlink subnets from devices on Actiontec subnet. I know this involes building static routes on all the routers and have done this but still can't access so presume either my static routes are incorrect or more likely there is something I have to in the router firewalls. I lean more to the router firewalls as I am guessing they are blocking the inbound traffic.
Anybody have any hints as to how this is done?
Solved!
Go to Solution.

You'd generally have a static route pointed to the (WAN) address of the next router in the chain.
Your outside router (Actiontec) would have
static route 192.168.0.0/24 with the nexthop 192.168.1.253.
static route 192.168.3.0/24 with the nexthop 192.168.1.254.
Your Dlink and netgear shouldn't need any static routes needed (since they are, generally speaking, default routing to the wan port). The problem you're running into is that they're also NATing the address.
So when you receive a packet from 192.168.3.2 (connected to the DLINK) on 192.168.1.2 (connected to the ACTIONTEC) the receiving device sees src:192.168.1.254 dst:192.168.1.2 most likely. When you're sending a packet to 192.168.3.2, with a nexthop of 192.168.1.254, that natting part isn't going to work like you expect (it's expecting a packet to 192.168.1.254 with a specific port, which it will then port-forward to 192.168.3.2 on the port you tell it to, whether it's the same port or not, based on port forwarding rules built on the dlink).
Does that help at all? Unless you can turn natting off, you need to be doing port-based stuff with port forwarding, in the setup you're describing, IMO.
Paul

Any Xbox Airport Experts Out There Willing to Help a Dummy?

I am really clueless about all the tech aspects of networking. So even when I do searches on the net about all this, the answers themselves often are as complicated as the problem itself for me ("give the Xbox it's own IP..." right....how does one do that???
I have an Airport Extreme network running in my home. All Mac in our house can see it fine, and all is well with the internet. The Airport Extreme is connected to a Westell modem using Bellsouth DSL.
My sons both have Xbox's. They both have wireless adaptors for their Xbox. When looking for networks, neither Xbox sees my network. It does see a network called WEST ( which I think is the Westell modem, but does not see my Airport EX network.
Is there anyone who could walk me through tips on how to get these guys hooked up properly? Like....a step by step?
Thanks so much
Tom

Thanks, I can try. Meanwhile, I found this, but it's an example of the explanation being as hard as problem when you don't know what you are doing;)
Xbox 360 and Airport Extreme Compatibility Fix
Posted Feb 26th 2007 3:45PM by David Dreger
Filed under: How-tos, Xbox Live
Better late than never, we have a workaround fix for the compatibility issues we reported earlier this month regarding the new Airport Extreme Base Station and Xbox 360. Go to your Airport Utility, then Option-Click the radio setting button to reveal a drop down menu, from there, select "b/g compatible", not "n (b/g compatible)". That takes away the benefits of an 802.11 n network, but it gets the job done with 54 Mbps.
Next up is to Option-Click the button for encryption setting and select "WPA Personal". In DHCP settings under Internet, using the 360's MAC address, reserve an IP so it stays consistent. Finally, in your NAT options, select the 360's IP address as the "Default Host" to prevent any Live functionality issues, and restart your Extreme Base Station. Once you go to the network settings on your System blade, you should see your WPA-encrypted network show up. So your 360 and Airport Extreme can work together with encryption, although you kind of neuter the Base Station in the process

Any case-fan experts here?

This is it!!!!! I have 3 80x80 Coolmaster (DAF-B81)-(28-32dB)(they have these thermal sensors which control the RPM), two at the back blowing in, one on the left side(next to the VGA card) blowing out, and now recently I got two 90x90 Coolmaster fans (TF9-25IM-7)-(37dB!!!!! )-both on the right side next to the drive, the lower one blowing in and the upper one blowing out.
I still have one free fan-hole( ) on the left side (upper one), and two in the front cover....
Heres some pictures of the case: http://www.chieftec.com/products/Workcolor/NewBX.htm
So I ask you, this is not a good setup is it?, but im new to the overcloking buisness.
I can always buy more fans if you know a better setup...
Im trying to find a Aquarius III water cooling set for the LGA775, but its almost impossible to find one where im living.....
Because the 90x90 fans are so damn loud I really need a fan controller for 4 fans,
So all I wanted to know is Which controller is the best one? and can I use the thermal sensor fans (80x80) with a controler????
Thanks.....

Ok, I just rotated my fans at the back so they are blowing out, And I bought powerful fans (loud but with a controller pin) at the right side blowing straight at the CPU-fan and the VGA.... And one fan blowing in at the harddrive.....
And I was able to lower CPU temp from 59°C IDLE to 55°C which I think is pretty good for a couple of fans....
But now the Hardrive is at 30°C but was at 23°C but thats ok... as long the temp doesnt go to 55°C...
But what do you think about having a equal amount of air going into the case and going out???? Is that very important???? (ps. no I dont got any filters on my fans....)
And maybe any comments on the type of fans you like the most????
(I know this post does NOT fit into this motherboard forum, but its to late.....)

PDF file into word????? Can any of you Experts answer this question?

My company has an online brochure in PDF format. Can I convert this flie into word so I can cut and paste it. I would like to make a power point presentation on it for training. Can anyone tell me if this can be done?

Its not possible with Adobe Reader. The max that you will be able to achieve via Reader X is to convert your PDF to a text file (.txt).
To enable your PDF to be saved as a word file (.DOC) or many other formats, you will need Adobe Acrobat X.
Thanks
Ankit

Any adobe acrobat expert here? any idea what font fd1067 is and where to download it? urgent!!

i have a file that has a font that says FD1067 when i highlight it and see its properties, i wanna do some editing on the fonts but i cant seem to find or download the font file anywhere as i have no idea what it is.Pls help and feel free to send an email to [email address removed by host]! thank you in advance!

You might be able to highlight the text and see if you can find an equivalent font to use as a substitute in the properties. However, the fonts need to have the same structure for a replacement and that is often a problem. What you may be looking at might simply be an outline font created at the time of the PDF creation. You might have a bit of a clue if you look at the document properties and check for what the PDF was made from.

Any Australian memory experts?

Similar Messages

Maybe you are looking for