Any available BADI for Delta Report correction in SAP APO?

Dear Experts,
I hope you can help us on this topics:
we implemented successufully ZXCIFUSERU09 in SAP APO in order to change the location of certain PO we are transferring from R3 to APO. This is mainly needed to avoid to create in APO all the plants we are using in R3 for performance/sizing reason.
Now we are trying to apply the same logic in delta report too in order to be sure delta report will give us only the real exception and not the list of orders where via exit ZXCIFUSERU09 we changed the location.
This is to avoid delta report is showing inconsistency that are not
true .
Dop you have any idea wich is the correct exit in APO we can use to do that? we tried with method RELEVANT_FOR_COMPARE_R3_PO but this called after the comparison with R3 data have been already done and so it cannot help us.
Thank you in advance for your feedback,
Barbara

Hello DB49,
thank you for your answer we have further investigated and we think the issue is in method
RELEVANT_FOR_COMPARE_R3_PO
where structure CT_APO_ORDER is empty . Do we need to add the data in this table as per your experience with other similar methods ro not?
We tried to add the data and result is that the comparison is done between the 2 structures:
CT_APO_ORDER and CT_R3_ORDER but for the first schedule line only! it seems a bug as the report is comparing both the lines in CT_APO_ORDER with the same schedule line in CT_R3_ORDER...
Do you think we need to add the data in CT_APO_ORDER or the data sould be already there and we only need to manipulate them?
Based on your reply and our test that I would like to ask SAP to correct the method as it seems a bug.
I also found Note 1363487 - BADI /SAPAPO/CIF_DELTA3 - add parameter CT_APO_ORDER that is confirm the structure CT_APO_ORDER should contain APO po data,....
Thank you very much for your feedback!
regards,
Barbara

Similar Messages

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

HT4972 I restore my Ipod touch but there is not any available upgrade for IOS and less IOS5

I need a help: I restore my Ipod touch but there is not any available upgrade for IOS and less IOS5

Which ipod do you have?
ios 4.2.1 is the latest available for the 2nd gen.
Identifying iPod models

Any Userexit & BADI for transaction VB(7 during final settlement

Hi SAP GURUS,
I have checked no user exit and BADI. Any Userexit & BADI for transaction VB(7 during final settlement. During final settlement of rebate, I have to change the amount from KONP table in transaction VB(7 . Let me know the userexit and BADI.
Regards,
Karthik.

Hi Sekhar,
These following BADI are not capturing KONP item details.
I want to capture KONP item details to modify amount.
ARC_SD_COND_CHECK : Archiving Object SD_COND: Additional Checks
ARC_SD_COND_WRITE : Archiving Object SD_COND: Archive Additional Data
SD_COND_SAVE_A : Save condition application A, E
Regards,
Karthik.

BADI for payroll report

Hi,
I found a BADI(pben_pay0008) for payroll driver(rpcalcu0) and implemented it from se19. It was asking me to enter the filter before i save it. So i gave molga as 10. Then I added a break-point statement in the method. Activated it by clicking a button at top as we do for our reports.
But when I run the payrolldriver it does not stop at break-point.
Is there any other place where I have to activate. Or is this some thing to do with filter. Package I gave the same as i use for reports.
Your help will be highly appreciated.
Thanks.

If any one can please look into this..

Is there any available API for BOE Translator?

Hi,
      Is there any available API SDK for BOE Translator?
      Since the client has 2000+ measures to be translated, simply configuring the translation manually cannot meet the needs. The client would like to build the translation in batch through code.
      So does the Translator have any API to call?
      Any suggestion is appreciated.
Best Regards,
Vincent Li

There currently is no public API for the Translation Manager.
Sincerely,
Ted Ueda

Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

hello
are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

Any available tools for formating xml document?

Hi, I'm just looking for a java tool can help me sorting the xml document and text in alphabetical order. Anybody has any suggestion? Thanks a lot.

Well, you don't have to write your own sort necessarily. You'll have to write a Comparator to use with an existing sort routine, and you'll probably have to do some non-trivial manipulation of data just to get it to a point where you can use the existing sort routine.
Of course, depending on the situation, writing your own sort might be easier. (Say, if you were merging two sorted documents into one.)

Is there any designing tool for jasper reports

Hi Friends,
i want some information, some one is told in jasper reoperts one dising tool is there this is just drag and drop feciity .
can u give me that information
Regards
Raghava

Yep. iReports

BADI for SE38

is there any standard BADI for SE38 transaction code in SAP 4.7?

Hi,
Transaction Code - SE38                     ABAP Editor
Enhancement/ Business Add-in            Description
Enhancement
SEU00001                                Function exit in program attributes
No.of Exits:          1
No.of BADis:          0
Thanks,
Sankar M

Is there any transaction code for Report Designer,Query Designer and WAD

HI Gurus,
please tell me s there any transaction code for
1 Report Designer
2 Query Designer
3 WAD
Thanks in advance
Prashant

Hi Prashant,
We don't have any Transaction Codes for these.
Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
You have to use only .
Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
Hope it helps.
Reward with points if helpful.
Regards
Hemant Khemani
Edited by: Hemant Khemani on May 16, 2008 5:39 PM

Problem in Getting Count answer for the report in OBIEE 11g..

Hi friends,
I created a report in OBIEE 11g, but i'm not getting the correct answer as i expected...I'm getting answer in presentation services but the answer is wrong..
I'll explain to you with an example report: Suppose in the report "NATIONALITY COUNT IN DEPARTMENT WISE" manner
i dragged the Nationality column from per_all_people_f which is dim table and i dragged the column that i applied aggregation rule "count" for the column "nation count" from per_all_assignments_f which is fact table......If i viewed answers means i'm getting correct answer
(i.e.) nation count per Nationality..........
NATIONALITY<---------------------->NATION COUNT
AUSTRALIA 40
INDIA 20
AFRICA 10
USA 5
The above is the answer I'm getting with out including the department column from hr_all_organization_units...........
But since according to the report i need count in department wise manner, so for that along with nationality and nation count column i dragged department column from hr_all_organization_units which is dim table and also i hide that column as i dont want to view the department column in answers..........
If i clicked answers, means then I'm not getting the nation count for the nationality......... I'm getting the answer 0 for each and every nationality, if i included the hided department column
NATIONALITY<----------------->NATION COUNT
AFRICA 0
AUSTRALIA 0
INDIA 0
USA 0
I'm getting answers like the above if i include the department dimension column which is in hided manner.........................
What is wrong with it........Whether i made any logical mistake for the report.....If so guide me friends..........
Cheers,
Harry...........

Hi,
you said about writing query in DB.......whether U meant of trying checking the query in toad..or something else..........
Since im giving only one join from dim to fact in the physical diagram........
But more than one join exist between those dim and fact, but im giving only one join mainly the primary key column of the dimension table to the fact table....Whether i need to give all the joins that exist(even if it has 2 or 3 joins between those fact and dim) tables....
If i give count distinct means it is giving count for every nation as 1....like i mentioned below
NATIONALITY<----------------------------------------------------->NATION COUNT
INDIA---------------------------------------------------------------------1
AUS------------------------------------------------------------------------1
CAN------------------------------------------------------------------------1
Since you said to check about depts of the particular column....i couldn't able to understand about "depts" that you meant????
Whether i made any logical mistake...........
thanks,
Harry...
Edited by: HariPrasad on Oct 10, 2010 9:55 PM

Anyone with a hint ref. why my office package wont work after showing this message: "Check with the developer to make sure it works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates"

also, I have to mention I already reinstalled package and nothing works. Help please!

Hi, thanks for getting back. Here is the full content on the window that pops up every time I click on my Word icon: "Microsoft Word cannot be opened because of a problem. Check with the developer to make sure Microsoft Word works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Click Report to see more detailed information and send a report to Apple". I reinstalled the application, and everything else is updated, so I am not sure what to do.

BADIs for a Transaction

Hi Gurus,
Can anyone please tell me how to findout the available BADIs for a Transaction?
regards
sunil

Hi Jaya,
There are 2 methods to find a BADI for any transaction.
Method 1:
step 1. Execute transaction SE37 or SE80 and find function module SXV_GET_CLIF_BY_NAME'.
step 2. Insert a breakpoint in it.
step 3. Now go to the SAP transaction you want to find a BADI in.
step 4. When you execute it, it will stop at the above function module.
step 5. Look at the value of field EXIT_NAME.
step 6. This will provide you with the name of the BADI that is available in your SAP transaction code.
Method 2:
step 1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
step 2. In 'Display' mode, go to 'Methods' tab.
step 3. Double click the method 'Get Instance' to display it source code.
step 4. Set a breakpoint on 'CALL METHOD l_exithandler=>get_class_name_by_interface'.
step 5. Then run your transaction.
step 6. The screen will stop at this method.
step 7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
Regards,
SB.

BADI for planning PRT with SNP

Dear Experts ,
I am facing some problems with PRT planning .
I need to send to SNP suboperation from main operation that is using PRT.
How do I plan PRT with SNP PDS ?
How the standard PRT works with SNP?
For PPDS i am using BADI CUSLNTRTO_ADDIN .... is there any specific BADI for SNP ?
Hope some one can help me ....
Nice Regards
Mauricio

I believe, 10 days are because of stock transfer horizon.
I am just guessing over here, in case of Heuristics, you must be planning finished product only.
While CTM plans for entire supply chain. CTM may not have found supply available for semi finished product and is trying to procure it. Hence, distribution receipt is getting created after Stock transfer horizon.
Abhay

Any available BADI for Delta Report correction in SAP APO?

Similar Messages

Maybe you are looking for