Any BADI or User-exit in BAPI_GOODSMVT_CREATE
Hi All,
Herecomes my requirement. Whenever a Transfer order is confirmed,
automatically a goods movement is being created using the function module
BAPI_GOODSMVT_CREATE. Now the table MSEG has been extended by a custom table
and this fields also needs to be populated by some value during material
document creation. Do we have a badi or an user-exit for the FM
BAPI_GOODSMVT_CREATE?
Thank you in anticipation.
Nikhil,
Enhancement MB_CF001 and BADI MB_DOCUMENT_BADI are available but the documentation very explicitly mentions that no changes can be done to the Material document header & items using these.
Can you clarify what you mean by "table MSEG has been extended by a custom table"? Has the table MSEG been modified ?(we do not have a custom include for MSEG at our installation). If you have a separate Z table, that can be easily updated with either the enhancement or BADI mentioned above.
Cheers,
Ramki Maley.
Similar Messages
-
Any BADI or USER EXIT for Authorization check in ME51N
Dear MM Gurus,
My requirement is to assign Authorization to the User to create Purchase requisition based on the combination of Plant and Storage location. Is there any BADI or User Exit available to achieve this?
Regards
Yogahi,
> Its not possible to have the authorization for PR at storage location level...
> you can have authorisations for Puchase organisation EKORG, plantWERKS, puchase group EKGRP, puchase document type BSART ...
> and authorisations objects are:
>M_BANF_BSA : Document Type in Purchase Requisition
> M_BANF_EKG : Purchasing Group in Purchase Requisition
> M_BANF_EKO : Purchasing Organization in Purchase Requisition
> M_BANF_FRG : Release Code in Purchase Requisition
> M_BANF_WRK : Plant in Purchase Requisition
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Apr 27, 2009 3:01 PM -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
BADI or User exit for FB50 to update custom field in table COEP
Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEPHi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB -
Badi or user exit for changing currency INR to EUR
hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu -
Need BADI or USER EXIT for VT02n
HI Friends,
I'm writing a driver program for a ouptput type ZET1 (interface) the tcode is VT02N .
In menu bar: goto--> output here i've give the output type and save.
My Problem is, if there is any error on the driver program, it should be displayed the error msg while pressing the save button.
is there any BADI or User Exit.
Thanks & Regards,
Vallamuthu.MHi,
Check the below BADI's
BADI_LE_SHIPMENT BadI: Shipment Processing
BADI_V56N User Exit Transport - Message Determination
Regards,
Srini. -
BADI or User Exit for Txn : CRMD_ORDER
Hi Experts,
Is there any badi or user-exits for the transaction crmd_order.
regrads,
arul jtohi aDear Arul Jothi,
BAPI_ACTIVITYCRM_CREATEMULTI
BAPI_BUSPROCESSND_CREATEMULTI
CRM_BUSPROCESSND_BAPI
CRM_LEADCRM_BAPI
BAPI_LEAD_CREATEMULTI
CRM_OPPORTUNITYCRM_BAPI
BAPI_OPPORTUNITY_CREATEMULTI
CRM_SLSTRANSACTCRM_BAPI
BAPI_SLSTRANSACT_CREATEMULTI
Also, visit the following thread:
Change status for sales order in crmd_order
BAdi/Enhancement:
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Regards,
Naveen. -
BAdI: or User Exit for Campaign Creation
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshDear Ganesh,
As campaign can be created and executed individually also, it will never check for higher level project ID.
Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan. -
Badi or user exit for allocation run (Tcode-J3AT) on save button
hi friends,
i m searching for the BADI or user exit for the Tcode J3AT on the save button press. if u know any badi or user exit for same pls let me know.
thanks and regards,
vicky.solved with the help of SAP note.
-
Hello All,
Our requirement is to change line item data in the MIRO before save. It would be a great help if you can provide any BAdI or User Exits.
Thanks
AnuragHave a look at below code
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode.
Also have a look at below code which lists the BADI for particular tcode.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
I hope this helps.
Best Regards,
Vibha
*Please mark all the helpful answers -
BADI or User Exit for VL09 after Reversing
Hi Experts,
I have a requirement that updating certain values in Custom Table after Reversing a Delivery. Is there any BADI or User Exit which trigger After Reversing a Delivery in VL09.
Thanks in Advance.1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute your SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction -
Hi,
When I am forwarding the work item from my SAP Inbox to another user. I want to capture the data like the wrk item no and the sender user id and forwarded user id.
Is there any BADI or User Exit which can be used in this case or any other of doing this.
Regards,
Ravi GRavi
Open FM SXV_GET_CLIF_BY_NAME. Set a breakpoint inside.
Now forward the work item to your inbox and see if the control breaks in the above FM.
If yes, see what is the value in the field 'name'. The value in this field is nothing but a BAdI.
Regards
Sabu. -
BADI or User Exit to Change the Item Details in AFAB Transaction(Depreciation)
Hi Experts,
I have a requirement of changing the Item details in AFAB Transaction (Internal Order Number). Is there any BADI or User exit available for that.
Thanks in advance.Hi Sivag,
You can find BADI for transaction in different ways. Try with below methods
1. To find New BADI(Karnel), Run the transaction with debug mode(/h), keep break point at statement
CALL BADI
2. To find old BADI (Classic), Keep break point at exit handler CL_EXITHANDLER=>GET_INSTANCE and run the transaction
3. Check in SPRO transaction - Check with functional consultant in which business process this transaction comes and any customization details available
4. Get pakage name of transaction and go to to tcode se84 enhancement browser . Try to find with package name, any enhancement available
Thanks & Regards,
aRun -
BADI or User Exit for updating MSEG
Hi,
We are using ECC 6.0 and here is the scenario that we have to update custom fields into VBAP, LIPS and MSEG tables when these fields are entered on the sales order screen VA01,VA02.These field are added on this screen using Additional Data B screen.Also, These fields are there in VBAP and LIPS through Append Structure and MSEG through CI_COBL.Is there any BADI or USER EXIT for this.Thanks in Advance.
Priya.Hi
You can use exit ZXMBCU02 ( Function EXIT_SAPMM07M_001
in SAP enhancement MBCF0002 ). Here also whtever changes you make to I_MSEG will be lost as MSEG is an importing parameter. You can do something like this.
FIELD-SYMBOLS <F1> TYPE MSEG.
DATA NAME(50) VALUE '(SAPMM07M)MSEG'.
ASSIGN (NAME) TO <F1>.
<F1>-KOSTL = 'XXXX'.
( In above example MSEG-KOSTL will be set as XXXX, you can change any of MSEG fields in above way. ).
Cheers -
BADI or User Exit required when a Task is created in a Transport
Hi Experts,
Could you please tell me is there any BAdi or User exit Triggered when a task is created in transport by any other users.
I need to track if some one simply adds task under others transport.
Thanks and regards,
VenkateshHi venkatesh,
put a breakpoint into method GET_INSTANCE of class cl_exithandler.
Then do what you want to supervise. The method is called for all BADIs triggered. You will find out which one can be used.
Please excuse the generic nature of my answer. I didn't know what you already tried.
Regards,
Clemens
Maybe you are looking for
-
I'm just wondering what's up with the RAM usage on my macbook. Right when I start up 500MB of RAM is being used (wired and active), 100MB of it being the kernel task. After a typical session of use, I close all programs and find that the RAM usage is
-
Looking for forums for Sony digital video camera recorder DCR-TRV 11
I've been thinking hard and decided that I WILL use my Sony digital video camera recorder DCR-TRV 11. (I was being tempted by a smaller Sony that has a 40x optical zoom. Question: Do you know of where I can find a good forum for this brand and model?
-
Installing RAC in Solaris 10 T2000
How can I create a shared file system using a Oracle cluster or a Sun Cluster software, the hard drive are locally in the T2000 server and I created 2 domains using the ldm. ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv-
-
Hi All, I want to count the Number of lines that the user had entered in a multi-lined text box. Because I want to restrict him up-to 6 lines. How Can I don this. Thanks in Advance,
-
Very Slow BB and Wireless Signal Dropping
Hi, I have a HomeHub 2 which has worked reasonably well over the years. Recently my BB speed seems pretty slow and the wireless signal keeps dropping every 5 seconds or so. We have several laptops in the house (not all online at once) and this proble