Any Bapi fn module to copy bi prd table data to bi dev table

Hi all,
Im BI techno functional consultant here my requirement is to write a report such that when it executes ,
it has to copy bi prd table data to bi dev table.
ex: The same ODS table data moving from BI PRD to BI DEV.
Can U please sujjest me the code to write a report or any  fn module..
with regards,
prasad.

hi prasad,
From BI point of view, what Amit suggested is the best way to get the data from one system to another sytem.(try to convince your client)
If you want to get the data through ABAP, check with an ABAPer if it possible to have another system(for example, Prod)
in the WHERE condition of a SELECT statement.
There are function modules which can be created with an attribute "remote enabled module"(you can see that in attibute screen of a function module) to get data from another system.(you will need more information than this)
This is more of an ABAP question. A post in the ABAP could be of help.
Thanks.

Similar Messages

  • Any BAPI/Function Module for adding new record with dates in PA0027

    Hi all,
    I am tryig to find is there any BAPI/Function module for updating new record with Start Date and End date for specified Personal Number in PA0027 Table.
    In PA0027 table i will be passing start date and end date for selected personal number, it needs to add new record with this details in the table checking the condition that this start date and end dates should not be between any of of start date and end dates for the specified personal number.
    thanks for ur time.
    Murali

    Hi Raj/Suresh thanks for ur answers.
    but i am having a problem,i gave this values.
    INFTY               -
                0027
    NUMBER              -
                00000010
    SUBTYPE             -
                010
    OBJECTID
    LOCKINDICATOR
    VALIDITYEND         -
                03/12/2006
    VALIDITYBEGIN       -
                03/01/2006
    RECORDNUMBER        -
                000
    RECORD              -
                P0027
    OPERATION           -
                CHK
    TCLAS               -
                A
    DIALOG_MODE         -
                0
    NOCOMMIT            -
                Y
    VIEW_IDENTIFIER
    SECONDARY_RECORD
    i am getting short dump saying that
    The source field is too short.
    The current program, "SAPLHRMM", tried to assign a field to a field symbo
    However, the field is shorter than the type of the field symbol, which
    is not allowed.
    The statement in question is in the form ASSIGN f TO <fs> CASTING or
    ASSIGN f TO <fs> with a field symbol that was created using the
    STRUCTURE addition.
    I tried  operation - Chage,Create (same thing for all inputs)
    is this correct funtion moduel for my requirment?
    what ever i am passing the start and end dates this should check in the table records with this personal number and if this start date and end dates are not between of any start and end dates then it should add new record with this dates.
    Thanks for ur time.
    Murali.

  • I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

    I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

    OS X can natively read NTFS of Windows, but not write to it.
    Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
    Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
    If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
    If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
    Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
    Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
    Bootcamp only allows Windows 7, that's it now.
    You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
    CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
    Good Luck

  • Is there any bapi that i can create sales order and date

    Hi Gurus
    is there any bapi that i can create sales order and date .

    This appears to be related to Problem With BAPI_SALESORDER_CREATEFROMDATA but without the detail. If you want to ask again, please add that detail.
    locked
    Rob

  • Any BAPI Function Module To Create the Workcenter  ?

    Hi
    Can any one can give the BAPI Function Module to Create the Workcenter ?
    Regards,
    N.L.

    Hi NL,
    Found FM CRAP_WORKCENTER_CREATE
    See if this FM serves your purpose.
    Regards,
    Raj

  • Is there any bapi/Function module to change only header text in fb02

    Hi ,
    I want to change only header text in FB02 .the header text will come  from a internal table.My Requirement is
    1. open a document in FB02
    2.change the header text of the document.
    Right now i'm doing this through an BDC.but i'm looking for a BAPI /FM.
    I Tried bapi_acc_gl_posting_post, fI_document_change..
    is there any BAPI/FM for this???
    Thanks,
    Challa

    You can use SAVE_TEXT FM
    Thanks
    Seshu

  • Any BAPI/function module to change Billing document

    Is there any BAPI / FM to change the Billing document once it has been created ?
    Your help is appreciated.
    Regards,
    Ankur Bhandari

    Hi,
    Go through the forums,
    BAPI/FM for printing Billing doc.
    Re: BAPI for creating billing document
    VF02 - CHANGE BILLING DOCUMENT
    Regards,
    Azaz Ali.

  • BAPI/function module to create/update vendor master data

    Hi
       We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
    Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

    Hi Kiran,
    If you want to load the vendor data into sap its better to go with LSMW batch input program.
    object 0040
    method 0001
    program name RFBIKR00
    Program type B
    this would be a good choice. Recently i did the same.

  • LSMW or ABAP Program:- I need BAPI function module or Direct input program

    hi experts,
    I have to develop the program which uploads the transportation pricing data for freight cost management.
    the transcation code is XK15 for the application A.
    There is a program called RV14BTCI which will uploads for the application V or M not for A.
    So i can use lsmw or direct input program in both lsmw and abap program so plz help me if there is any BAPI function module or Direct input program for Application A.
    thank you,
    waiting for u r reply.
    Edited by: SANTOSH MARUPALLY on Jan 22, 2008 6:27 AM

    Hi Santosh
    Am not really sure if RV14BTCI can not be used for other applications apart from V and M.
    You can try using BAPI: BAPI_PRICES_CONDITIONS. Over the forum you can find few example coding.
    Regards
    Eswar

  • BAPI Function Module for SCM APO Trans code /SAPAPO/AC42

    Hi,
       Is there any BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
       This BAPI FM should return the column values "Remaining Prod Alloc"  and "Incoming Order Quantity" when we give
       below details as inputs for the Tcode /SAPAPO/AC42
            Product Allocation Group
            Product
            Allocation Procedure
            prod Alloc step
            Product Alloc Object (Characteristics of Product Alloc Group)
            Plant (Characteristics of Product Alloc Group)
            Customer Group 5 (Characteristics of Product Alloc Group)
        Reward points if helpful.
    Thanks,
    Mich

    Hi,
    You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
    ProductAllocationAPO.DataInsert
    Interface to Import Product Allocation Data  Functionality
    This method is used to adopt data from OLTP systems for product allocation in the global availability check.
    You can do the following using the method:
    Adopt new data
    You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
    Change existing data
    You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
    The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
    Prerequisite
    To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
    Regards
    Vinod

  • BAPI/Function module for FAIV06

    Hi All,
    I want post the debit/credit material document using transaction FAIV06.I searched for BAPI/function module but nothing found.
    if you know any bapi/function module or is there any alternate method for posting the document.
    please help.
    Thanks.

    I think there is  only a BAPI to get the details of a Info record BAPI_INFORECORD_GETLIST. For creagting / updating you will have to write a BDC.
    regards,
    Ravi
    Note : Please mark the helpful answers

  • Any BAPI/ FM available to update workcenter in tasklist operation

    Hi,
      I need to update the workcenter details in the General/Equipment/Funtional location tasklist.
      Please suggest me any BAPI/Function module available in SAP to do the same.
      The transactions are
      General - IA06
      Equipment - IA02
      Floc - IA12
    Thanks,
    Best regards,
    Ajith

    gave up on this one

  • BAPI function module for FUNDS Update

    Hi All,
    Anybody can help us on BAPI function module for FUNDS Update in FI funds management module please.
    Thanks & Regards
    Srini

    Hi,
    We are writing a program to change / update the existing funds in table FMFINCODE funds master. Here we are using a function module called FM_FUND_CHANGE but we are not able to capture the return messages. So please suggest me any BAPI function module availble for the same. Tcode : FM5U
    Regards
    Srini

  • BAPI or Function Module to get MSEG table data based on PO Number (EBELN)

    Hi
    1. Is there any BAPI /  Function Module to get PO details based on Plant and PO date?
    2. Is there any BAPI / Function Module to get Material document details(MSEG data) based on PO number?
    Thanks
    Narendra

    Hi,
    check the Bapis Givem below
    BAPI_PO_GETITEMS
    http://abap.wikiprog.com/wiki/BAPI_PO_GETDETAIL1
    you will get the detail.
    Regards

  • Is there any BAPI to update LFA1/LFB1?

    Hi, Expert:
    I wrote one customer program to upate the following two fields. Is there any BAPI I can use, because It's master data. we need create CHANGE POINTERS.  we can't directly update them.
    LFA1-SPERQ (2)  Function That Will Be Blocked
    LFB1-ZAHLS (1) - Block key for payment
    Regards,
    Zhang

    Hi experts, I have to modify the master data also, but, the scenario for me is diferent. I have to update the withholding - tax information. I need to create new rows , and also modify others. I know that´s information is in the LFBW table, but i can´t find any bapi to update it. Any Idea?
    Thanks in advance.

Maybe you are looking for