Any bios release with Nvidia core calibration for K9N2 ?

Having the last official bios update for my mainboard model: ms-7374 v1.2 (K9N2 SLI PLAT.) --> bios 3.5, i've just seen that new Msi mainboards equipped with new revision of 750A sli and the new 980A sli (nf750A-G55 & nf980A-G65) allow to activate defectuous cores on Phenom x3 & x2 thanks to this bios option: "nvidia core calibration" like AMD chips called "ACC" so my mainboard having not this useful bios option do you think that the future bios release will have it ? I hope so cause i would like to change my 9650 for a 720 Black Edition for Christmas !!

Quote from: Hans on 27-November-09, 05:40:13
The 790FX-GD70 is simply a great board... I've used it for the past few months and it's really doing a great job.
So, if you are considering to buy it, I'd say: go for it!
Yes Hans i believe you concerning this 790FX board but as i've said before i will keep my K9N2 even though there won't have any bios release with Nvidia core calibration option because i have always preferred Nvidia chips (as regards mainboards or graphic cards) than Ati-Amd chips whatever the brand (in the past i had Abit, Asus, Epox, Gigabyte mainboards on socket A/754/939 and always with Nvidia Nforce chips ) so i will just change in a few months my 9650 for a 955/940 Black Edition... By the way the 790FX-GD70 only supports DDR3 and i don't want to change my 4 Gigs G.Skill Hk dual channel DDR2 kit
The best way shoud be that all the owners of K9N2 Diamond and Platinum boards should tell Msi engineer team to make a new bios release having the NVCC function...

Similar Messages

Are there any bios conflicts with using a 7800GT/ NF4 SLi 7100 mobo?

Simple question, does anyone know of any problems with runing a 7800GT with a MSI NF4 SLi mobo/bios version-V.6.00PG-V9.0 031505(W7100NZ1)?, Thanks!

for anyone who reads this thread although my new 7800gt/co are non MSI, I wanted to list a stern warning to beware of what bios these cards are shipping with, I have never had so many problem swith a set of cards in my entire life, the vendors are playing russian roulette with the delta clock settings in the bios, effectively makeing the cards auto throttle 40mhz when dettecting a high performance app running, which causes a lot of problem when you have already overclocked the card manually without taking this auto +40mhz into effect, I finally got some resolution with a revised bios release, but be on the look out for this fluffing scheme the are doing with this cards.

How do you setup HDMI audio with "Nvidia Quadro 4000 for Mac"?

So I just purchased a new Mac Pro:
Mac Pro (5,1) 3.33 GHz 6-Core
8 GB Ram
ATI Radeon HD 5770
1TB HDD
OS 10.8.3
I also purchased a new Nvidia Quadro 4000 for Mac Graphics Card because the 3D animation software I'm using (Blender) requires this card to accelerate render times.
I have installed the card and all is working well as far as I can tell except for the HDMI audio. According to the specs on Nvidia for this card, it DOES support HDMI audio through the Display port. I have my HDMI cable plugged up and the video works great. However the audio option does not show up in the System Preferences. (Here is the page for the graphics card. Look under "specifications" at the bottom for the audio part. http://www.nvidia.com/object/product-quadro-4000-mac-us.html).
I did find a link for a kernel addition for HDMI audio but it stated "non-Apple Nvidia cards" and this one is specifically for Mac. Here is that link: http://forums.macrumors.com/showthread.php?t=1499797. (I also plan on posing the same question there.)
The reason I want the HDMI to work is I'm using a TV as my monitor.
Now I did try the HDMI with the ATI Card and both the audio and video work great.
What I did for a quick work around is install both cards and use the GPU processor on the Nvidia for the animation program and use the ATI for the actual port and this fixes the hdmi audio issue. However this takes up pretty much all of my PCI slots and seems like a waste of space and power.
Has anyone else run into this problem and found a solution?? Any guidance would be greatly appreciated.
Thanks!

I went ahead and tried that extension that I found. It worked!
I guess Mac just didn't include the audio support in the driver that it includes. Below is were I found the instructions and download. It includes a shell script that installs the kernal from the Terminal prompt. The instructions were clear and installed with out a hitch. There were also instructions to remove it if there were issues.
Here is the link:
http://forums.macrumors.com/showthread.php?t=1499797
Thanks again and hope this helps.

I need bios compatible with celeron E3200/E3300 for P35 neo-f

I need the bios compatible with Celeron E3200 for P35 neo-f, my motherboard is running the latest version of bios

There are 2 P35 Neo MB's. One w/BIOS 2xx and the other w/BIOS 1xx. G33 Neo also has the same BIOS & CPU support as P35 Neo w/BIOS 1xx. From what I see the one w/BIOS 2xx supports it but the one w/BIOS 1xx does not. Best would be to contact MSI with your question and specify which BIOS your MB has. >> G33 Neo <<
This list also shows the difference: >> P35 Neo <<
>> Contact MSI <<

Is there any complete sample with its execution steps for kerberos?

Hi
Thank you for reading my post
Is there any sample (java files) with a howto that i can use as an start point?
for example some complete sample which authenticate users with windows server 2003,
and sample gives some details about when to use kinit and klist and ....
Thanks.

Hey,
I'm not quite sure, but you might be interested in this tutorial: http://www-128.ibm.com/developerworks/java/library/j-gss-sso/
This is supposed to be a ready-to-use example...
Together with Sun's tutorial at http://java.sun.com/j2se/1.4.2/docs/guide/security/jgss/single-signon.html, you should get it working.
Good luck!

Are there any sound cards with best driver support for Arch?

I was wondering if there are any sound cards that have the best driver support for ArchLinux? I currently own a Creative Labs X-FI Platinum Edition. The main reason I like the Platinum is that has an interface you can plug MIDI and Audio ports into. It seems to me, however, that Creative is the worst company to support Linux drivers. If anyone has any opinions, please feel free to comment. According to all my research, ALSA sound drivers are the most supportive for sound. Am I also correct in this assumption?

yeah, creative sucks. go with m-audio. they support linux unlike creative.

Display problems with NVIDIA K5000 card for Mac

I have recently switched cards in my Mac to the heavier NVIDIA K5000 card. While great for After Effects and Premiere, I get wild artifacting in Indesign CC 2014.
Is this a know issue and how can I (hopefully) solve this?
Albert

I've branched this issue to a new discussion as it was unrelated to the problem the other folks were seeing.
We continue to widen the number of video cards that we support GPU acceleration on. It sounds like this is what you're running into.
Since it's unrelated to Protected Mode, definitely go back and make sure that you've removed the line from your mms.cfg that you may have added while troubleshooting that problem. Disabling Protected Mode in general is a bad idea, and will leave you vulnerable to many modern classes of attacks over the long term.
If you haven't updated to the latest available drivers for your graphics hardware, please do that. It may eliminate the issue you're experiencing.
If that doesn't work, please check out our graphics troubleshooting guide:
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
If you're still stuck after this, please file a bug here: http://bugbase.adobe.com/
Please reply to the thread with the Bug ID, so that I can follow up on it.
Also, include the output of dxdiag.
To do that, click Start > Run
Type the following, then press [Enter]:
dxdiag
Click Save All Information

I have a friend from Montreal Canada who is in U.S.A. for 2 months. Her old iPad has to be replaced. Is there any compatibility problems with the iPad made for U.S.A. and those one made for Canada?

I have a friend from Montreal, Canada who is in U.S.A. for 3 months. Her old iPad is not working very well and she thinks about buying a new iPad. Is there any compatibility problem between iPad sold in the States and those one sold in Canada?

http://www.apple.com/ipad/specs/
http://www.apple.com/ipad/LTE/

Problem with NVidia Quadro FX 4000 on MSI K8T Master2-Far

Hello everyone, I am new to the forums here. I cannot figure out what is causing my problem.
I have been having performance issues with my new Quadro FX 4000 on my system. I have been in communication with Nvidia tech support for a while now. Here is the discussion I have been having with them. It explains my problem in detail. Be sure to read it from bottom to top though.
*Update*
I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
Here is my PSU:
http://www.xpcgear.com/500wseepsubl.html
I do not know much about PSU's, so any input is greatly appreciated. Thanks.
Response (GL)
Pat,
I have checked the NVBug Database and although there has been Bugs submitted where a MSI Master2-Far motherboard was used, none of the issues were caused by the motherboard. They just happened to have a MSI Master2-Far motherboard.
We have seen conflicts when both ATI and NVIDIA drivers are both installed, but I would hope that the Driver Cleaner software removed the lines in the registry as well.
Did you try the FX4000 in the other system (the one that had the MX 440) ?
I believe you are taking to right steps in resolving this issue.
Looking at the Windows Error Reporting, it seems you have had some app problems.
Looking forward in hearing your results
Best regards,
NVIDIA Customer Care.
Customer (Pat Miller) 02/07/2007 12:19 AM
OK I completed my tests and got some interesting results.
-I installed the GeForce Mx 440 on my computer and it yielded similar poor performance just like the Quadro did (terrible window scrolling, stuttering, horrible gaming).
-I then installed the Quadro on the computer I yanked the Geforce MX 440 from. I installed the most recent drivers, and it worked WONDERFULLY. There was no stuttering, no lagging, and Open GL gaming seemed even better than the MX 440 (I know the Quadro is not designed for gaming, but some Open GL counter-strike served as a nice little test.) Unfortunately, that computer does not have Adobe Premiere or any high-end applications for me to really test the card with.
-After those two tests, I uninstalled the MX 440 from my computer and re-installed its ORIGINAL ATI 9600 SE. It worked just like it did before I first received the Quadro. No window lagging, no stuttering, and adequate gaming.
All of these test yield a few conclusions to me:
1. The Quadro FX 4000 card is not defective, it does indeed work.
2. My computer seems to dislike Nvidia cards and/or drivers (seeing as the Quadro and GeForce gave me terrible results while the ATI worked fine.)
It would seem to be a driver issue, almost like my original ATI driver files are still running. That would explain everything. However, I completely removed the ATI driver AND ran Driver Cleaner to clear all ATI files from my system before attempting to install the Nvidia card.
I cannot think of a reason for these inconsistencies. Tomorrow I plan on preparing to completely crash my computer. Backup my files and completely format my HD's and reinstalled Windows XP Pro, my Mobo software, all drivers, ect.
I will await any ideas or suggestions before I format my computer. I hope these tests along with my system info helps. Thank you very much.
Customer (Pat Miller) 02/06/2007 07:51 PM
Ok,
Here is my system info. I realize that the Quadro FX 4000 has a conflicting IRQ with my onboard gigabyte ethernet, but my old ATI card was the same way, and it never caused a problem. Also, I am unsure how to fix that anyways. Hopefully this info helps us determine the problem.
I am going to try a few tests of my own. I am going to install a GeForce MX 440 AGP card(from my other computer) and see how it performs. Then I will try re-installing my old ATI 9600SE card. If I get similar low performance, than it must be something else besides the card. Otherwise, the card is the issue.
Thanks for the help.
Response (GL) 02/06/2007 12:15 PM
Pat,
Maybe the system info will shed some light.
Please perform the following steps:
1) Click on the Start button
2) Select Run
3) In the Open field, type in "msinfo32" and then press the OK button
4) This will bring up the Microsoft System Information Utility.
Click on File and then Save to save this information to your hard drive. You may give it any name you choose.
5) Once the file has been saved on your hard drive, attach it to this support request so that we may review your system configuration.
Looking forward for your response.
Best regards,
NVIDIA Customer Care.
Customer (Pat Miller) 02/02/2007 05:19 PM
I completely uninstalled my old ATI and Nvidia drivers. I went into safe mode and ran Driver Cleaner also. I freshly installed the new Nvidia driver and I still have low performance.
I am trying to download Viewperf, but it is downloading at about 30k/s, which will take about a day to finish. What else could be causing this? It is possible its a bad card? I got it new on Ebay from a legitimate seller, but it came with the card only.
Response (GL) 02/01/2007 06:00 PM
Thank you for contacting NVIDIA Customer Care
There should not be any performance drop browsing the internet or moving windows across screens.
Since you did have an ATI card installed, you may want to verify that all files have been removed.
This also includes the registry since there are applications known to leave files behind.
Once all ATI files have been removed, please run a benchmark software such as ViewPerf.
Viewperf 9.03 can be found on the following location:
http://www.spec.org/gpc/downloadindex.html
Best regards
NVIDIA Customer Care
Customer (Pat Miller) 02/01/2007 01:35 PM
I recently upgraded to a Quadro FX 4000. I do a lot of video editing on Premiere, and from what I read, it seemed like the best card to get. However, I am getting very poor performance with this card. For example, just browing the internet and moving windows around yields a very stuttery picture. And I do not notice any different using Premiere.
I uninstalled my old video card (ATI 9600 SE) and uninstalled the drivers for it as well.
I have tried 3 different versions of drivers for the Quadro 4000, including the most recent.
I have checked the power connections, and the card is receiving power on both the ports.
I really have no idea what could be causing this bad performance. Is this how the card works? Did my ATI 9600SE yield better performance for internet browsing than this card does? The only thing I can think of is that the card is not getting enough power because it connects to 2 seperate power cables from the PSU which already power lots of other things (HD's, Disk Drives, Fans).
Any help is greatly appreciated. Here at my system specs:
Custom built PC
MSI Master2-Far Mobo
2x AMD Opteron 244
2G Transcend DDR 333 Registered Ram(1 stick)
2x WD 74G Raptors (RAID 0)
1x Maxtor 250G
2x DVD burner
1x DVD Rom
Quadro FX 4000 AGP
*Update*
I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
Here is my PSU:
http://www.xpcgear.com/500wseepsubl.html
I do not know much about PSU's, so any input is greatly appreciated. Thanks.

Hi there, welcome to forum.
"*Update*
I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
Here is my PSU:
http://www.xpcgear.com/500wseepsubl.html
I do not know much about PSU's, so any input is greatly appreciated. Thanks."
your PSU is good one and should be powerfull enough.
Output +3.3V@28A, +5V@30A, +12V@34A, [email protected], [email protected], +5VSB@2A
can't be power related, since at 1st your PSU must be enough, 2nd same issue happend with your old mx 440 VGA. card malfunction are dismissed as possibility as well since its work fine in another machine.
think its drivers mess. ATI drivers(or part of them) still exist, guess is not completely removed. same symptoms happend many times when switching between Ati to NV, lagging 2D scrolling lag and etc, caused by ATI Smart (part of ATI Drivers) sometimes remain(survive after driver cleaner).
suggest you a new clean fresh OS installation. like Nv support already directed. also ensure in BIOS, in "Integrated Peripherals", "Init Display First" are configured to AGP.
let we know how its going, if problem persist we a ready with a tips to resolve your issue.

Mail Merge script to replace any blank fields with specific text

In InDesign Mail Merge I would like to replace any blank fields with specific text. For example if we have four fields (A, B, C & D) to merge, and field A is blank, it would insert field C.
In essence leaving no blank fields but replacing a blank field with another specific field.
I have read that inDesign does have Mail Merge limitations but if there is a script that we could run that would solve our problem.
Please let me know if you can help?

I take from the lack of response it is not possible to do this in InDesign.

Any known problems with 2.6.32.5 kernel, xorg 1.7.3.902 and nvidia 190

Hi everybody.
Last update I did was when xorg 1.7.x (where x is between 1 and 3, dont remember), and it broke my xorg, I had some glitches with graphics, and x randomly crashed.
Now xorg 1.7.3, kernel 2.6.32.5 and nvidia 190.53 is here for pretty long time and as arch suer I feel committed to update
So i read the forum here a bit, and havent found any particular issues that broke the system, but I want to be safe.
I got nvidia geforce 6600 agp if it does matter.
So is there any particular issues that can arise after updating?
Thanks a lot!

Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
I got nvidia geforce 7300.
Any solution to this besides downgrading?

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo without the original CD?

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo with snow leopard without the original CD?

Hi,
apart from the MacBook Air this feature is of no use for other Macs right now.
Simply ingnore it (click "I already have the Drivers...) and continue with the installation.
Sorry to say but you need the OSX Install DVD for the BootCamp Driver installation.
The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
Later updates (3.1 and 3.2) can be downloaded from Apples Support website.
Call Apple and ask for a replacement and they usually send you one for a small fee.
And have the Serial-Number of your Mac at hand when calling.
And since the OSX Install DVD can also be vital for maintenance and repair it is best to have one.
The needed BootCamp Drivers are on the OSX Install DVD 1 that came with your Mac.
Insert that disc while in Windows after the Windows installation to install the drivers.
Regards
Stefan

New release strategy should not trgger for PO released with old Rel Strategy

Hi All,
Please suggest. Po has been fully released with Release Strtgy V1 XX. Now I m replacing release strategy XX with ZZ. If I change any po which has old rel str XX , system will reset new release strategy as in config changeability indicator 4 maintained.
But requirement is if there is any change or value decreasing in fully released Pos with old strategy it should not retrigger new release strategy. If value Increases then New strategy should retrigger.
Please help me on this.
regards,
Rohit

HI Rohit
A reset of the release strategy only takes place if
       - the changeability of the release indicator is set to '4' in
          case of a purchase requisition and '4' or '6' in case of
          another purchasing document (purchase order, request for
          quotation, contract, scheduling agreement),
       - the document is still subject to the previous release
          strategy,
       - the new TOTAL NET ORDER VALUE is higher than the old one.
The most important thing to consider in to avoid changes to release strategy customizing once the release strategy is used.
The commom steps are:
1- make sure all of the old POs should have been released.
2- don't delete/change the original release strategy. create a new release strategy with copy function, then the old release strategy will not be replaced.
3- if you delete the original release strategy and add a new release strategy which the characteristics in classification is same as old release strategy then the PO (have been approved) will be replaced with the new release strategy.
Kind regards,
Lorraine

Is there any BIOS for enabling AES-NI for i5-2410M

I'd like to enable AES-NI in my i5-2410M X220. I found out that for unlocking AES-NI I need updated BIOS with new CPU microcode revision. Is there any BIOS for X220 which includes new microcode, which supports AES-NI commans for i5-2410M?

http://forums.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/IdeaPad-y570-and-AES-NI/m-p/479013#M39663
AES-NI has been enabled since the T410 series.
Run the tool from that other thread and see if it's there.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

NVIDIA QUADRO 4000 for MAC---Issues with Adobe Premeire

Hello,
Mac Pro (Tower)
*OS 10.7.5
*2.8 GHx Quad-Core Intel Xeon
*16 GB RAM
I've had a multitude of issues with Adobe Premiere on this system and I'm not sure what to attribute it to. First of all: I have two MAC Book Pro's that run APremiere, with similiar specs and only 8GB of RAM. These two laptops run APremiere flawlessly and it's because of this reason that I can deduce, that my 'tower' is having issues because of the NVIDIA QUADRO 4000 installed; it's the only difference, besides the RAM, that the computers have. Has anyone had issues using the NVIDIA QUADRO 4000 before? Some of the issues I've been having are (please note, these issues are random, happen at random times and on random projects. The majority of the footage I use is MOV (from DSLR cameras) and MP4's (from a Sony EX-1)):
*Renders crashing
*Slow clip playback
*An oddity: certain MP4 files will go out of sync-on playback from APremiere and even in a VLC player
*AMedia Encoder crashes
Maybe the NVIDIA has nothing to do with it?
Thanks for your time and help.
Tim S.

Maybe the NVIDIA has nothing to do with it?
One way to accrue evidence would be to turn off Mercury Playback in the Project Settings.
I have that card, and turning of MPE often gets me through a session. Some here have claimed that the card is the cause of the frequent Serious Errors, and disabling it is the solution.
That's hardly satisfactory when one of the best features of Pr is the ability to use CUDA.
However, anything going through the card also has to pass through Pr and the OS. Adobe claims that updating to 10.8 fixes some bugs, but according to some here (myself included), not enough.
I had one project recently that I couldn't get the Serious Errors to stop until I re-installed the nVidia driver.
But, your list of problems could be due to corrupt Pr preferences. If you have a Mac, you need to get used to refreshing your prefs several times a day. They could also be corrupt media. That will cause renders to crash.

Any bios release with Nvidia core calibration for K9N2 ?

Similar Messages

Maybe you are looking for