Any body know why FCPX doesn't support footage recorded in 1080-60P form Panasonic HDC-TM900 camcorder?, Any body know why FCPX doesn't support footage recorded in 1080-60P form Panasonic HDC-TM900 camcorder?

Anybody know why FCPX  doesn't support footage recorded in 1080-60p form Panasonic Camcorder HDC-TM900???

I'm trying to decide on a new camcorder between the new yet to be released Panasonic HD-X900M and the Canon VIXIA HF G10.  Currently have a Canon HV 20 which works great, but thought I'd upgrade to newer tech.  Looking at the supported cameras list published by Apple, the newer Panasonic hasn't been tested yet so am unsure if it is the same as the previous model.  I suspect it is.  The newer Canon appears to be good, but spec. say it is only good up to 1080I.  I'd rather have the progressive camera if it isn't that much of a hassle to convert the files.
Thanks for alll your info on this subject. 
Dale

Similar Messages

  • HT5148 I wish to purchase a Panasonic HDC-TM900 camcorder - will I have any problems with FCPX

    It is my intention to buy a new camcorder and am thinking of a Panasonic HDC-TM900 but I have read is some of the reviews that there are some problems in downloading into FCPX.  Is this camera a good purchase or is there a better alternative at around £650. (in uS dollars I would guess at about $1000)

    I have a similar model and it works OK with FCP X.
    HDC-SDT750.
    Top camera to use.
    Al

  • I have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

  • AVCCAM Importer with FCPX and Panasonic HDC-TM900

    Has anyone tried the new AVCCAM Importer from Panasonic with Final Cut Pro X and a Panasonic HDC-TM900 with 1080p video?
    I have just started reading all of the posts on issues with TM900 and Final Cut Pro X with 1080p video and was hoping the new plugin from Panasonic may have helped!
    My concern is the download only references Final Cut Pro and Quicktime 7.
    https://eww.pass.panasonic.co.jp/pro-av/support/desk/e/avc_download.htm#avccamvm ac
    I have a 2011 MacBook Pro which has Quicktime 10 and was hoping to buy FCPX but won't if I can't import my video properly.
    I was even willing to go through a conversion process but in looking at all of the board posts, it seems that for the Panasonic TM900 with 1080p video, there are not any programs that will convert properly, i.e. one puts a green screen every second or there is video artifacts.
    If the new plugin "AVCCAM Importer" does not help with the TM900 / 1080p video in FCPX, what alternatives do I have to edit HD 1080p video on my Mac??
    Is there a conversion tool that has fixed the issues mentioned above or is there another video editor that will import the .mts files natively?
    I don't want to go back to my PC if I can help it and I don't plan on making a feature film, just editing home videos onto Blue-ray as I used to do on my PC with Pinnacle Studio.
    Appreciate the feedback!!

    [Minimum System Requirements]
    Mac
    * Mac computers with Intel processor(s)
    * 2GB of RAM or more
    * Mac OS X 10.6 (Snow Leopard)
    * QuickTime 7
    * Final Cut Pro 7.0.3 or better
    however Not compatible with Final Cut Pro X (Ten)
    Not Ten.

  • TS2756 hy, does anyone know why my computer doesn't recognise my iphone? I can't seem to make it see the personal hot spot :( any suggestions? thanks

    hy, does anyone know why my computer doesn't recognise my iphone? I can't seem to make it see the personal hot spot any suggestions? thanks

    Did you update to iOS 7? If yes you need to update iTunes on your computer to iTunes 11.1
    If you are using iTunes 11.0 and iOS 6.x then show the left sidebar in iTunes.
    When in iTunes on your computer use the View menu to View Sidebar. The device should show up there when connected.

  • Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
    tracking down the cause of the flakiness can be tricky ... as you already know ...
    just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation

    Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation.on my dock

    Have you contacted the dock manufacturer?
    The adopter supports audio if the dock manufacturer says the dock supports the 5G iPod.
    It may be that the dock does not work with iOS 6.x vie the 5G. Sometimes an iOS update will break compatibility.

  • Why does fcpx suddenly stop reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

    why does fcpx suddenly stops reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

    Could be systems logs or some other system file growing.
    Use OmniDiskSweeper or DaisyDisk to map what's being used.
    Regards,
    Shawn

  • HT5958 I have just updated to FCPX 10.1 but my new libraries do not contain any of my previous events or projects - any body know the answer?

    I have just updated to FCPX 10.1 but my new libraries do not contain any of my previous events or projects - any body know the answer?

    Did you select the "update old events and projects"  option?
    Are the originals on external hard drives that aren't connected at the moment?
    Exactly how did you upgrade to 10.1?

  • How do you download SDHC files from Panasonic HDC-TM900 camcorder to a MAC

    i bought a panasonic HDC-TM900 camcorder.  when i try to download files from the SDHC memory card, i only see
    a still photo and it appears i cannot download files onto my MAC.  the manual for this camcorder tells me that
    i cannot download files from a SDHC memory card except onto a PC.  however i am in a remote area and i do
    not have access to a PC--only a MAC laptop.

    I am also new to Firefox. From Firefox start screen click the add-ons icon. In the search box at top right type in " music downloads " and click the magnifying glass - many options will appear by clicking on the blue " more " of each option you will receive additional info. Hope this helps, I have used the Flash Video Downloader add-on with great results.

  • MBP doesn't recognize Panasonic HDC-TM900

    My MBP doesn't recognize Panasonic HDC-TM900 videocamera. I tried to connect both devices through an USB cable, but the camera is not recognized by the computer, no trace of the camera in System Profiler or Disk Utility. What should I do to solve this problem? Any tip welcomed.

    It's very possible that the card was not formatted properly inside the camera or you are recording in 1080p60 (or 50) and your editing software does not recognize that format.
    I hope that makes sense

  • Why doesn't Apple support iSync any more?

    Apple hasn't added any additional cell phone support in iSync since 10.4 was released. If I want iSync support with my Verizon service, I have a choice of three phones (out of FIFTY) -- and two of those phones cost over $150, and the third is about as low-end as you can get. No Chocolate, no V-Cast, NOTHING. Apple wants the Mac to be the center of my digital lifestyle, so why isn't Apple working towards that goal?

    "Apple hasn't added any additional cell phone support in iSync since 10.4 was released."
    Yes, they have.
    For Sony Ericsson phones, Mac OS X 10.4.3 added K750, D750, K600, W600 and Z520 support, Mac OS X 10.4.6 added W600 & W900 support, and Mac OS X 10.4.7 added Z530 & W810 support.
    Many other manufacturers phones had support added in the iSync 2.2 and iSync 2.3 updates part of Mac OS X 10.4.6 and 10.4.7 respectively.
    If Verizon offers a poor selection of phones, then maybe you should look for another network provider. Apple has no control over the handsets each network provider offers.
    The LG Chocolate phone (like all other LG, Samsung etc.) phones uses a proprietary syncing protocol, unlike Nokia, Sony Ericsson and Motorola, who all use the industry standard SyncML.
    You should direct your comments towards the mobile phone manufacturers who repeatedly refuse to build support for industry standards into thier phones, and refuse to provide Mac syncing support like they do for Windows.
    Why do you think Apple should provide support for other manufacturers phones? Microsoft doesn't do it for Windows... the phone manufacturers do.
    Apple have provided the system-level SyncServices framework which allows third-party device manufacturers to create iSync plugins for their phones. It is hardly Apple's fault if certain manufacturers choose not to.
    So, complain to your network provider or phone manufacturer - not Apple.

  • Trying to install adobe acrobat pro 9 on a new laptop after deactivating it on old laptop. After installation I get Update check for some reason then doesn't let me go any further Anyone know why this is?

    OK so I have deactivated and uninstall the version off the old laptop, then reinstalled the version on the new laptop. When you go to open a document it says it wants to do an upgrade check for some reason, anyone know why this is? It will not take the serial number after that and it doesn't show the version we have in the drop down list.

    Hi johnb49273320,
    What operating system are you running on the new laptop? If it's a current OS, then it may be incompatible with Acrobat 9. Please see https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html.
    It could also be that you're trying to install an upgrade, and the installer is looking for the serial number for the previous version (is the previous version listed in the drop-down list?).
    Best,
    Sara

  • Why FCPX doesn't support many cool fonts in Russian

    Hey guys, does anybody knows if there is a solver for my problem. The case that preinstalled fonts don't support Russian. But I need it to make cool titles. Anybody knows?

    Flipitos wrote:
    ****, they sell fonts..... I don't purchase such things
    Well, then you just have to live with the build-in OS fonts, or make an effort to find free ones you like!
    Fonts is sold, just like computers.. you did buy your computer, right??
    You also bought FCPX, right??
    Remember that it might have taken an individual or company 100's of hours to create the font you like... and most like to get paided for that!

Maybe you are looking for